7 CFR Part 42
29 sections.
- § 42.101Meaning of words
- § 42.102Definitions, general
- § 42.103Purpose and scope
- § 42.104Sampling plans and defects
- § 42.105Basis for selection of sample
- § 42.106Classifying and recording defects
- § 42.107Lot acceptance criteria
- § 42.108Normal, tightened, or reduced inspection
- § 42.109Sampling plans for normal condition of container inspection, Tables I and I-A.
- § 42.110Sampling plans for tightened condition of container inspection; Tables II and II-A.
- § 42.111Sampling plans for reduced condition of container inspection, Tables III and III-A; and limit number for reduced inspection, Table III-B.
- § 42.112Defects of containers: Tables IV, V, VI, VII, VIII, IX, and X.
- § 42.113Defects of label, marking, or code
- § 42.114Procedures for evaluating interior container defects
- § 42.120Description and qualification
- § 42.121Sampling and inspection procedures
- § 42.122Applicability of other procedures
- § 42.123Flow diagram for skip lot sampling and inspection
- § 42.130Description and qualifications
- § 42.131Selection of samples
- § 42.132Determining cumulative sum values
- § 42.133Portion of production acceptance criteria
- § 42.134Disposition of rejected portions of production
- § 42.135Normal, tightened or reduced on-line inspection
- § 42.136Applicability of other procedures
- § 42.140Operating Characteristic (OC) curves for on-line sampling and inspection
- § 42.141Obtaining Operating Characteristic (OC) curve information for skip lot sampling and inspection
- § 42.142Curve for obtaining Operating Characteristic (OC) curve information for skip lot sampling and inspection
- § 42.143Operating Characteristic (OC) curves for on-line sampling and inspection
This is legal information, not legal advice. Laws vary by jurisdiction and change frequently. Always verify current law with official sources and consult a licensed attorney in your jurisdiction for advice on your specific situation.