Skip to main content
09-2012-5127Administrative - FormalClosedFY 2012· Region 09

EPA v. California Technical Plating CA/FO

Final Order With Penalty

Case summary

On October 28, 2010, U.S. Environmental Protection Agency (EPA) representatives conducted an unannounced site inspection of CTP, located in San Fernando, California. The purpose of the inspection was to determine CTP’s compliance with applicable federal environmental statutes and regulations, and in particular, the Resource Conservation and Recovery Act (RCRA), as amended, the regulations provided in the Code of Federal Regulations (CFR), Chapter 40, Parts 261-265, 268, and 279, and the California Code Regulations (CCR), Title 22, Division 4.5 and the California Health and Safety Code, Division 20. CTP provides 17 plating processes to their customers, which are primarily in the aerospace industry. CTP is an FAA repair station and they plate jet engine components. Their focus is on small components, ranging from half inch to three feet in length. CTP is also a job shop and provides painting and coating services. , EPA alleges that Cal Tech Plating committed the following violations of the authorized State’s RCRA regulatory requirements: • Storage of hazardous waste without a permit in violation of 22 C.C.R. § 66270.1 (see also 40 C.F.R. § 270.1); • Failure to close containers of hazardous waste in violation of 22 C.C.R. § 66265.173(a) (see also 40 C.F.R. § 265.173(a), 22 C.C.R. § 66273.33(b)(1) and 40 C.F.R. § 273.13(d)(1)); • Failure to maintain adequate aisle space in hazardous waste storage area in violation of 22 C.C.R. § 66265.35 (see also 40 C.F.R. § 265.35); • Failure to maintain a current contingency plan in violation of 22 C.C.R. § 66265.52 (see also 40 C.F.R. § 265.52); • Failure to comply with hazardous waste training requirements in violation of 22 C.C.R. § 66265.16 (see also 40 C.F.R. § 265.16); and • Failure to maintain copies of hazardous waste manifests in violation of 22 C.C.R. § 66262 (see also 40 C.F.R. § 262.40(a)). The total penalty in the settlement is $22,000.

Defendants (1)

  • California Technical PlatingNamed in complaintNamed in settlement

Facilities (1)

  • CALIFORNIA TECHNICAL PLATING INCORPORATED

    11533 BRADLEY, SAN FERNANDO, CA, 91340

    Registry ID: 110000782706

Statutes cited

  • RCRA 3002Standards Applicable to Generators of Hazardous Waste

Enforcement conclusions (1)

  • California Technical Plating CA/FOentered 2012-09-28

    Primary law: RCRA

    Federal penalty: $22,000

Timeline (4 milestones)

  • 2012-09-28Complaint Filed/Proposed Order
  • 2012-09-28Final Order Issued
  • 2012-09-28Enforcement Action Closed
  • 2012-10-01Enforcement Action Data Entered

Case metadata

EPA activity ID
3000065855
Case number
09-2012-5127
Lead agency
EPA
EPA region
09
Voluntary self-disclosure
No
Primary statute
Standards Applicable to Generators of Hazardous Waste

Sourced verbatim from EPA ECHO Enforcement Case Report for case 09-2012-5127 . Bulk data: ICIS-FEC download summary.

This is legal information, not legal advice. Laws vary by jurisdiction and change frequently. Always verify current law with official sources and consult a licensed attorney in your jurisdiction for advice on your specific situation.