EPA v. SAFETY KLEEN SYSTEMS, INC.

Case summary

'Within 30 days of the effective date of the Order, Safety-Kleen must comply with the control device monitoring requirements for the thermal oxidizer (Control 22), under the NESHAP at 40 C.F.R. ���� 63.693(f)(3) and 63.695(e), and the March 24, 2000 CAAPP Permit at Conditions 7.1.8(d) and 7.1.8(g). Specifically, Safety-Kleen must establish the minimum operating parameter value or maximum operating parameter value for the thermal oxidizer continuous monitoring system in accordance with the requirements under the NESHAP at 40 C.F.R. �� 63.695(e)(3)(i) and the CAAPP permit at 7.1.8(g)(iii)(A). For purposes of this Order, the performance test specified under the NESHAP at 40 C.F.R. ��63.695(e)(3)(i) and the CAAPP permit at Condition 7.1.8(g)(iii)(A) shall mean the performance test conducted on the thermal oxidizer on November 14, 2001. Hereafter, Safety-Kleen shall comply with the all the recordkeeping and reporting requirements applicable to the use and maintenance of the thermal oxidizer (Control 22) under the NESHAP at 40 C.F.R. ���� 63.696 and 63.697, and the CAAPP permit at Conditions 7.1.9 and 7.1.10. Hereafter, Safety-Kleen must achieve, demonstrate, and maintain compliance with 40 C.F.R. Part 63, subpart DD for OSWRO, and its current CAAPP permit, at its Dolton Recycle Center in Dolton, Illinois.'

Defendants (1)

• Safety-Kleen System Inc.Named in complaintNamed in settlement

Facilities (1)

• SAFETY-KLEEN SYSTEMS INC

  633 E 138TH ST, DOLTON, IL, 60419-1058

  Registry ID: 110000432489

Statutes cited

• CAA 112 — Hazardous Air Pollutants

Enforcement conclusions (1)

• Safety-Kleen System Inc.entered 2002-06-05

  Primary law: CAA

Timeline (2 milestones)

• 2002-06-05Final Order Issued
• 2002-09-11Enforcement Action Data Entered