§ 231.31 Drawbars for freight cars; standard height.
Primary source
Verbatim text below is from the Electronic Code of Federal Regulations (eCFR), a public-domain U.S. government work. Always verify the current version with the eCFR before relying on it for any legal matter.
Full Text
(a) Except on cars specified in paragraph (b) of this section—
1/21/21/2(1) On standard gage (56 -inch gage) railroads, the maximum height of drawbars for freight cars (measured perpendicularly from the level of the tops of the rails to the centers of the drawbars) shall be 34 inches, and the minimum height of drawbars for freight cars on such standard gage railroads (measured in the same manner) shall be 31 inches.
(2) On 36-inch gage railroads, the maximum height of drawbars for freight cars (measured perpendicularly from the level of the tops of the rails to the centers of the drawbars) shall be 26 inches, and the minimum height of drawbars for freight cars on such 36-inch gage railroads (measured in the same manner) shall be 23 inches.
1/21/2(3) On 24-inch gage railroads, the maximum height of drawbars for freight cars (measured perpendicularly from the level of the tops of the rails to the centers of the drawbars) shall be 17 inches, and the minimum height of drawbars for freight cars on 24-inch gage railroads (measured in the same manner) shall be 14 inches.
(4) On railroads operating on track with a gage other than those contained in paragraphs (a)(1) through (a)(3) of this section, the maximum and minimum height of drawbars for freight cars operating on those railroads shall be established upon written approval of FRA.
(b) This section shall not apply to a railroad all of whose track is less than 24 inches in gage.
[66 FR 4192, Jan. 17, 2001]
This is legal information, not legal advice. Laws vary by jurisdiction and change frequently. Always verify current law with official sources and consult a licensed attorney in your jurisdiction for advice on your specific situation.