Airworthiness Directives; The Boeing Company Airplanes
Primary source
Metadata and text below are from the Federal Register, a public-domain U.S. government work. Always verify the official published version before relying on it for any legal matter.
Issuing agencies
Abstract
The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model 767 airplanes. This AD was prompted by reports of inoperative manual and alternate horizontal stabilizer trim switches. This AD requires repetitive inspections for immersion of each limit switch and position transmitter module (LSPTM) and of the LSPTM electrical wiring, repetitive inspections for blockage of the drain holes and cleaning of each drain hole, repetitive inspections for loose or cracked leveling compound, and applicable on-condition actions. For certain airplanes, this AD also requires installing two new drain holes, performing repetitive inspections for blockage of the drain holes and cleaning each drain hole, and applicable on-condition actions. The FAA is issuing this AD to address the unsafe condition on these products.
This is legal information, not legal advice. Laws vary by jurisdiction and change frequently. Always verify current law with official sources and consult a licensed attorney in your jurisdiction for advice on your specific situation.