Pipeline Safety: Safety of Gas Transmission Pipelines: Repair Criteria, Integrity Management Improvements, Cathodic Protection, Management of Change, and Other Related Amendments

Primary source

Metadata and text below are from the Federal Register, a public-domain U.S. government work. Always verify the official published version before relying on it for any legal matter.

Published

October 25, 2022

Issuing agencies

Transportation DepartmentPipeline and Hazardous Materials Safety Administration

Full Text

<html>
<head>
<title>Federal Register, Volume 87 Issue 205 (Tuesday, October 25, 2022)</title>
</head>
<body><pre>
[Federal Register Volume 87, Number 205 (Tuesday, October 25, 2022)]
[Rules and Regulations]
[Page 64384]
From the Federal Register Online via the Government Publishing Office [<a href="http://www.gpo.gov">www.gpo.gov</a>]
[FR Doc No: C1-2022-17031]


=======================================================================
-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Pipeline and Hazardous Materials Safety Administration

49 CFR Part 192

[Docket No. PHMSA-2011-0023; Amdt. No. 192-132]
RIN 2137-AF39


Pipeline Safety: Safety of Gas Transmission Pipelines: Repair 
Criteria, Integrity Management Improvements, Cathodic Protection, 
Management of Change, and Other Related Amendments

Correction

    In Rule Document 2022-17031, appearing on pages 52224-52279, in the 
issue of Wednesday, August 24, 2022, make the following correction:

0
On page 52267, in the third column, paragraph ``(2)(i)'' is corrected 
to read as set forth below.


Sec.  192.3   Definitions. [Corrected]

* * * * *
    (2)(i) If the length of the wrinkle bend cannot be reliably 
determined, then wrinkle bend means a bend in the pipe where (h/D)*100 
exceeds 2 when S is less than 37,000 psi (255 MPa), where (h/D)*100 
exceeds (47000--S)/10,000 +1 for psi [324--S)/69 +1 for MPa] when S is 
greater than 37,000 psi (255 MPa) but less than 47,000 psi (324 MPa), 
and where (h/D)*100 exceeds 1 when S is 47,000 psi (324 MPa) or more.
* * * * *
[FR Doc. C1-2022-17031 Filed 10-24-22; 8:45 am]
BILLING CODE 0099-10-P


</pre></body>
</html>

View on FederalRegister.gov →Plain-text source

Indexed from Federal Register on October 25, 2022.

This is legal information, not legal advice. Laws vary by jurisdiction and change frequently. Always verify current law with official sources and consult a licensed attorney in your jurisdiction for advice on your specific situation.