Skip to main content
Proposed Rule2026-22373

Airworthiness Directives; MD Helicopters, LLC Helicopters

Primary source

Metadata and text below are from the Federal Register, a public-domain U.S. government work. Always verify the official published version before relying on it for any legal matter.

Published
November 3, 2026

Issuing agencies

Transportation DepartmentFederal Aviation Administration

Abstract

The FAA proposes to supersede Airworthiness Directive (AD) 90- 19-02, which applies to all MD Helicopters, LLC (type certificate previously held by McDonnell Douglas Helicopter Company) Model 369, 369A, 369D, 369E, 369F, 369FF, 369H, 369HE, 369HM, and 369HS, helicopters, that are equipped with a cargo hook. AD 90-19-02 requires replacing the overrunning clutch assembly and sprag assembly with airworthy parts and repetitively inspecting the sprag assembly, clutch inner and outer races of the overrunning clutch assembly. Since the FAA issued AD 90-19-02, after further analysis the FAA determined that additional helicopter models are affected by this unsafe condition. This proposed AD would expand the applicability and would require removing certain overrunning clutch assemblies and certain overrunning clutch subassemblies from service, installing or replacing parts, and reidentifying certain overrunning clutch assemblies, as applicable. This proposed AD would also require for certain model helicopters, revising the Airworthiness Limitations Section (ALS) of the existing aircraft maintenance manual (AMM) or instructions for continued airworthiness (ICA) and the existing approved maintenance or inspection program, as applicable. The FAA is proposing this AD to address the unsafe condition on these products.

Indexed from Federal Register on November 3, 2026.

This is legal information, not legal advice. Laws vary by jurisdiction and change frequently. Always verify current law with official sources and consult a licensed attorney in your jurisdiction for advice on your specific situation.