Notice2026-07534

Foreign-Trade Zone (FTZ) 80, Notification of Proposed Production Activity; StandardAero, San Antonio; (Refurbished Engines); San Antonio, Texas

Primary source

Metadata and text below are from the Federal Register, a public-domain U.S. government work. Always verify the official published version before relying on it for any legal matter.

Published
April 17, 2026

Issuing agencies

Commerce DepartmentForeign-Trade Zones Board

Full Text

<html>
<head>
<title>Federal Register, Volume 91 Issue 74 (Friday, April 17, 2026)</title>
</head>
<body><pre>
[Federal Register Volume 91, Number 74 (Friday, April 17, 2026)]
[Notices]
[Pages 20637-20638]
From the Federal Register Online via the Government Publishing Office [<a href="http://www.gpo.gov">www.gpo.gov</a>]
[FR Doc No: 2026-07534]


=======================================================================
-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

Foreign-Trade Zones Board

[B-40-2026]


Foreign-Trade Zone (FTZ) 80, Notification of Proposed Production 
Activity; StandardAero, San Antonio; (Refurbished Engines); San 
Antonio, Texas

    StandardAero, San Antonio submitted a notification of proposed 
production activity to the FTZ Board (the Board) for its facility in 
San Antonio, Texas within FTZ 80. The notification conforming to the 
requirements of the Board's regulations (15 CFR 400.22) was received on 
March 26, 2026.
    Pursuant to 15 CFR 400.14(b), FTZ production activity would be 
limited to the specific foreign-status material(s)/component(s) and 
specific finished product(s) described in the submitted notification 
(summarized below) and subsequently authorized by the Board. The 
benefits that may stem from conducting production activity under FTZ 
procedures are explained in the background section of the Board's 
website--accessible via <a href="http://www.trade.gov/ftz">www.trade.gov/ftz</a>.
    The proposed finished products include: turbojets, aircraft 
turbines--small fan engines not exceeding 25kn of thrust; turbojets, 
aircraft turbines--large fan engines exceeding 25kn of thrust; 
turbopropellers, aircraft turbines--of a power not exceeding 1,100 kW; 
and, turbopropellers, aircraft turbines--of a power exceeding 1,100 kW 
(duty-free).
    The proposed foreign-status materials/components include: 
accumulators; adaptors; gearbox adaptors; acoustic attenuators; turbine 
air baffles; gearshaft baffles; rubber baffles; bearing balls; 
cylindrical roller bearings; spherical bearings; bell cranks; turbo-fan 
blade fans; insulation blankets; compressor rotor blisks; block 
assemblies; block modules; base metal flat-mounting blocks; turbofan 
blocks; aluminum bolts; base metal bolts; accumulators; nickel bolts; 
steel bolts; steel threaded bots; terminal box assemblies; junction 
boxes; aircraft base metal bracket mountings; base metal brackets; 
rubber brackets; steel brackets; turbofan braids; nickel braids; 
plastic braids; breathers; turbofan bushes; alloy steel threaded 
bushes; gear box bushings; bearing bushings; steel non-threaded 
bushings; rubber oil seal bushings; plastic bushings; rubber bushings; 
steel bushings; cables; turbofan cable assemblies; stainless steel 
cables; plastic closure caps; turbofan fuel caps; plastic caps; steel 
caps; steel threaded caps; turbofan carriers; assembly valves cases; 
turbofan cases; turbofan casings; chain assemblies; electrical clamps; 
aluminum clamps; plastic fitting clamps; plastic clamps; steel clamps; 
turbofan clips; aluminum collars; steel collars; steel threaded 
collars; turbofan collars; assembly combustion cases; turbofan cones; 
turbofan connectors; aluminum connectors; electrical connectors; rubber 
connectors; steel connectors; contact sockets; electrical contacts; 
turbofan contacts; turbofan control units; turbofan coolers; turbofan 
cords; nickel couplings; gearbox couplings; non-alloy steel couplings; 
protective covers; plastic transportation cover; steel transportation 
cover; aluminum covers; turbofan covers; valve covers; steel cup-
springs; turbofan dampers; turbofan deflectors; turbofan diffuser; 
rotor discs; turbofan distributors; gearbox distributors; turbofan 
dowels; turbofan ducts; turbofan elbow guides; turbofan fairings; 
turbofan fillers; two layers of metal gaskets; steel gears; gearboxes; 
gear shafts; generators; turbofan governors; plastic grommets; plastic 
switch guards; steel guides; base metal gutters; turbofan hoses; check 
valve housings; gearbox housings; pump housings; turbofan housings; 
valve housings; glass indicators; insert elastomers; steel non-threaded 
inserts; magnesium inserts; nickel inserts; steel threaded inserts; 
turbofan inserts; igniter box leads, turbofan leads; turbofan liners; 
rubber links; turbofan links; turbofan locks; loom assemblies; loom 
switch resisters; turbofan lugs; turbofan manifolds; steel nails; steel 
nipples; rubber nipples; pump nozzles; turbofan nozzles; steel nuts; 
nickel nuts; rubber o-rings; turbofan preformed packing; turbofan 
assembly pads; turbofan panels; insulation patches; steel cotter pins; 
nickel pins; steel pins; rubber pins;; turbofan pipes; turbofan plate 
assemblies; base metal plates; pump plates; retaining plates; steel 
plates; fan platforms; electrical plugs; turbofan plugs; igniter plugs; 
steel plugs; plastic plugs; plastic closure plugs; pump plugs; steel 
plugs; threaded steel plugs; turbofan probes; centrifugal pumps; oil 
fuel pumps; turbofan ram air controls; stainless steel reducers; 
turbofan reducing unions; oil reservoirs; fixed resistors; variable 
resisters; retainers; roller bearing retainers; turbofan retainers; 
plastic retaining rings; stainless steel retaining-floating nut; 
turbofan ring; gearbox ring; steel ring; turbofan rivet; nickel rivet; 
steel rivet; turbofan rod; bearing housing rod; bearing rollers; 
aircraft generator rotors; turbofan screens; plastic screws; steel 
threaded screws; shaft seals; turbofan seals; plastic seal rings; 
rubber seal rings; electrical seals; nickel seals; steel seals; 
turbofan seats; turbofan segments; electrical sensors; pressure 
sensors; fuel pump shafts; turbofan shafts; rotor shafts; turbofan 
sheaths; turbofan shields; turbofan shims; turbofan shrouds; base metal 
sign plates; gear sleeves; plastic sleeves; steel sleeves; turbofan 
sleeves; electrical sockets; gear spacers; steel non-threaded spacers; 
rubber spacers; steel spacers; steel threaded spacers; turbofan 
spacers; turbofan spinners; helical springs; nickel springs; steel 
springs; turbofan springs; valves starters; generator stators; steel 
strainers; turbofan strainers; steel straps; turbofan straps; glass 
strips; nickel strips; rubber strips; turbofan strips; steel studs; 
base metal supports; bearing supports; gear supports; turbofan 
supports; electrical switch assemblies; electrical switches; isolating 
switches; turbofan switches; nickel tags; rubberized non-knitted tapes; 
synthetic tapes; isolating terminals; electrical terminals; turbofan 
thermocouples; electrical transducers; temperature-oil transmitters; 
turbofan transmitters; base metal tubes; non-threaded stainless steel 
tubes; steel tubes; threaded stainless steel tubes; turbofan tubes; 
retaining tubes; turbofan turnbuckles; relief valves; steel valves; 
turbofan vanes; nickel washers; steel non-threaded washers; plastic 
washers; rubber washers; steel washers; titanium washers; balance 
weights; turbofan wires; and, wiring harnesses (duty rate ranges from 
duty-free to 15%).
    The request indicates that certain materials/components are subject 
to duties under section 122 of the Trade Act of 1974 (Section 122) or 
section 301 of the Trade Act of 1974 (section 301), depending on the 
country of origin. The applicable section 122 and section 301 decisions 
require subject merchandise to be admitted to FTZs in privileged 
foreign status (19 CFR 146.41).
    Public comment is invited from interested parties. Submissions 
shall be addressed to the Board's Executive Secretary and sent to: 
<a href="/cdn-cgi/l/email-protection#294f5d53695d5b484d4c074e465f"><span class="__cf_email__" data-cfemail="1e786a645e6a6c7f7a7b30797168">[email&#160;protected]</span></a>. The closing period for their receipt is May 27, 2026.
    A copy of the notification will be available for public inspection 
in the

[[Page 20638]]

``Online FTZ Information System'' section of the Board's website.
    For further information, contact Brian Warnes at 
<a href="/cdn-cgi/l/email-protection#85e7f7ece4ebabf2e4f7ebe0f6c5f1f7e4e1e0abe2eaf3"><span class="__cf_email__" data-cfemail="0765756e66692970667569627447737566636229606871">[email&#160;protected]</span></a>.

    Dated: April 15, 2026.
Elizabeth Whiteman,
Executive Secretary.
[FR Doc. 2026-07534 Filed 4-16-26; 8:45 am]
BILLING CODE 3510-DS-P


</pre><script data-cfasync="false" src="/cdn-cgi/scripts/5c5dd728/cloudflare-static/email-decode.min.js" defer></script></body>
</html>
Indexed from Federal Register on April 17, 2026.

This is legal information, not legal advice. Laws vary by jurisdiction and change frequently. Always verify current law with official sources and consult a licensed attorney in your jurisdiction for advice on your specific situation.