Airworthiness Directives; GE Aviation Czech s.r.o. (Type Certificate Previously Held by WALTER Engines a.s., Walter a.s., and MOTORLET a.s.) Engines
Primary source
Metadata and text below are from the Federal Register, a public-domain U.S. government work. Always verify the official published version before relying on it for any legal matter.
Issuing agencies
Abstract
The FAA is superseding Airworthiness Directive (AD) 2024-06-02 for all GE Aviation Czech s.r.o. (GEAC) Model M601D-11, M601E-11, M601E-11A, M601E-11AS, M601E-11S, and M601F engines. AD 2024-06-02 required a one-time detailed visual inspection (DVI) of the compressor case pad welds for any crack, and replacement of the compressor case if necessary. Since the FAA issued AD 2024-06-02, the manufacturer determined that the compliance time for the DVI can be extended, and repetitive inspections of the centrifugal compressor case must be accomplished. This AD requires performing repetitive DVIs of the compressor case pad welds for any crack, replacing the compressor case if necessary, and sending certain inspection results to the manufacturer. The FAA is issuing this AD to address the unsafe condition on these products.
This is legal information, not legal advice. Laws vary by jurisdiction and change frequently. Always verify current law with official sources and consult a licensed attorney in your jurisdiction for advice on your specific situation.