Airworthiness Directives; CFM International, S.A. Engines
Primary source
Metadata and text below are from the Federal Register, a public-domain U.S. government work. Always verify the official published version before relying on it for any legal matter.
Issuing agencies
Abstract
The FAA proposes to supersede Airworthiness Directive (AD) 2018-19-16, which applies to all CFM International, S.A. (CFM) Model LEAP-1A23, -1A24, -1A24E1, -1A26, -1A26E1, -1A26CJ, -1A29, -1A29CJ, - 1A30, -1A32, -1A33, -1A33B2, and -1A35A engines with certain full authority digital engine control (FADEC) and prognostic health monitoring (PHM) software installed. AD 2018-19-16 requires removing certain FADEC and PHM software and installing versions eligible for installation. Since the FAA issued AD 2018-19-16, the manufacturer has developed a new pressure subsystem (PSS) with a heater element to evaporate potential moisture on the PSS manifold/transducer interface and prevent freezing at low temperature. This proposed AD would require replacing certain FADEC and PHM software with new versions that are eligible for installation, replacement of certain harnesses with newly designed harnesses, and replacement of the PSS with a newly designed heated PSS. The FAA is proposing this AD to address the unsafe condition on these products.
This is legal information, not legal advice. Laws vary by jurisdiction and change frequently. Always verify current law with official sources and consult a licensed attorney in your jurisdiction for advice on your specific situation.