Airworthiness Directives; The Boeing Company Airplanes
Primary source
Metadata and text below are from the Federal Register, a public-domain U.S. government work. Always verify the official published version before relying on it for any legal matter.
Issuing agencies
Abstract
The FAA proposes to supersede Airworthiness Directive (AD) 2013-08-16, which applies to certain The Boeing Company Model 737-700 and -700C series airplanes. AD 2013-08-16 requires repetitive inspections for cracking of the fuselage skin at certain locations at chem-mill areas and repair if necessary. Since the FAA issued AD 2013- 08-16, the FAA has determined that the compliance times are not adequate. This proposed AD would continue to require the actions in AD 2013-08-16 but at reduced compliance times and would require post- modification inspections if an optional modification is accomplished. The FAA is proposing this AD to address the unsafe condition on these products.
This is legal information, not legal advice. Laws vary by jurisdiction and change frequently. Always verify current law with official sources and consult a licensed attorney in your jurisdiction for advice on your specific situation.