Rule2025-04441
Airworthiness Directives; Pratt & Whitney Canada Corp. Engines
Primary source
Metadata and text below are from the Federal Register, a public-domain U.S. government work. Always verify the official published version before relying on it for any legal matter.
Published
March 19, 2025
Effective
April 23, 2025
Issuing agencies
Transportation DepartmentFederal Aviation Administration
Abstract
The FAA is adopting a new airworthiness directive (AD) for certain Pratt & Whitney Canada Corp. (P&WC) Model PW535E and PW535E1 engines. This AD was prompted by a manufacturer design review that indicated certain flange bolts securing the gas generator case and turbine support case are susceptible to cracking at their current low- cycle fatigue (LCF) life. This AD requires repetitive borescope inspections (BSI) of the gas generator case to turbine support case retaining bolts for evidence of bolt cracks, bolt fracture, missing bolts, or loose bolts and replacement, if necessary, as specified in a Transport Canada AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Full Text
<html>
<head>
<title>Federal Register, Volume 90 Issue 52 (Wednesday, March 19, 2025)</title>
</head>
<body><pre>
[Federal Register Volume 90, Number 52 (Wednesday, March 19, 2025)]
[Rules and Regulations]
[Pages 12679-12682]
From the Federal Register Online via the Government Publishing Office [<a href="http://www.gpo.gov">www.gpo.gov</a>]
[FR Doc No: 2025-04441]
=======================================================================
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. FAA-2024-2539; Project Identifier MCAI-2023-00971-E;
Amendment 39-22985; AD 2025-05-13]
RIN 2120-AA64
Airworthiness Directives; Pratt & Whitney Canada Corp. Engines
AGENCY: Federal Aviation Administration (FAA), DOT.
ACTION: Final rule.
-----------------------------------------------------------------------
SUMMARY: The FAA is adopting a new airworthiness directive (AD) for
certain Pratt & Whitney Canada Corp. (P&WC) Model PW535E and PW535E1
engines. This AD was prompted by a manufacturer design review that
indicated certain flange bolts securing the gas generator case and
turbine support case are susceptible to cracking at their current low-
cycle fatigue (LCF) life. This AD requires repetitive borescope
inspections (BSI) of the gas generator case to turbine support case
retaining bolts for evidence of bolt cracks, bolt fracture, missing
bolts, or loose bolts and replacement, if necessary, as specified in a
Transport Canada AD, which is incorporated by reference. The FAA is
issuing this AD to address the unsafe condition on these products.
[[Page 12680]]
DATES: This AD is effective April 23, 2025.
The Director of the Federal Register approved the incorporation by
reference of a certain publication listed in this AD as of April 23,
2025.
ADDRESSES:
AD Docket: You may examine the AD docket at <a href="http://regulations.gov">regulations.gov</a> under
Docket No.FAA-2024-2539; or in person at Docket Operations between 9
a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD
docket contains this final rule, the mandatory continuing airworthiness
information (MCAI), any comments received, and other information. The
address for Docket Operations is U.S. Department of Transportation,
Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200
New Jersey Avenue SE, Washington, DC 20590.
Material Incorporated by Reference:
<bullet> For Transport Canada material identified in this AD,
contact Transport Canada, Transport Canada National Aircraft
Certification, 159 Cleopatra Drive, Nepean, Ontario, K1A 0N5, Canada;
phone: (888) 663-3639; email: <a href="/cdn-cgi/l/email-protection#b1e5f29ff0d8c3c6dec3c5d9d8dfd4c2c2f5d8c3d4d2c5d8c7d4c29cf2dedfc2d8d6dfd4c2d5d4dfd0c7d8d6d0d3d8ddd8c5d49fe5f2f1c5d29fd6d29fd2d0"><span class="__cf_email__" data-cfemail="0357402d426a71746c71776b6a6d667070476a716660776a7566702e406c6d706a646d667067666d62756a6462616a6f6a77662d57404377602d64602d6062">[email protected]</span></a>; website: tc.canada.ca/en/aviation.
<bullet> You may view this material at the FAA, Airworthiness
Products Section, Operational Safety Branch, 1200 District Avenue,
Burlington, MA 01803. For information on the availability of this
material at the FAA, call (817) 222-5110. It is also available at
<a href="http://regulations.gov">regulations.gov</a> under Docket No. FAA-2024-2539.
FOR FURTHER INFORMATION CONTACT: Barbara Caufield, Aviation Safety
Engineer, FAA, 2200 South 216th Street, Des Moines, WA 98198; phone:
(781) 238-7146; email: <a href="/cdn-cgi/l/email-protection#ed8f8c9f8f8c9f8cc38e8c988b84888189ad8b8c8cc38a829b"><span class="__cf_email__" data-cfemail="a5c7c4d7c7c4d7c48bc6c4d0c3ccc0c9c1e5c3c4c48bc2cad3">[email protected]</span></a>.
SUPPLEMENTARY INFORMATION:
Background
The FAA issued a notice of proposed rulemaking (NPRM) to amend 14
CFR part 39 by adding an AD that would apply to certain P&WC Model
PW535E and PW535E1 engines. The NPRM published in the Federal Register
on November 26, 2024 (89 FR 93225). The NPRM was prompted by Transport
Canada AD CF-2023-60, dated August 14, 2023 (Transport Canada AD CF-
2023-60) (also referred to as the MCAI), issued by Transport Canada,
which is the aviation authority for Canada. The MCAI states that data
from a design review by the manufacturer identified insufficient LCF
life for flange bolts, having part number (P/N) MS9696-08 and P/N
MS9489-06, that secure the engine gas generator and turbine support
cases. At certain high-stress circumferential locations, LCF cracks
could develop on the flange bolt and lead to fracture of the bolt.
Multiple fractured bolts could lead to flange separation or case
rupture, which may damage the engine and the airplane. To address this
unsafe condition, the manufacturer published material that provides
instructions for repetitive BSIs and replacement of the affected parts.
In the NPRM, the FAA proposed to require repetitive BSI of the gas
generator case to turbine support case retaining bolts for evidence of
bolt cracks, bolt fracture, missing bolts, or loose bolts, and
replacement, if necessary. The FAA is issuing this AD to address the
unsafe condition on these products.
You may examine the MCAI in the AD docket at <a href="http://regulations.gov">regulations.gov</a> under
Docket No. FAA-2024-2539.
Discussion of Final Airworthiness Directive
Comments
The FAA received no comments on the NPRM or on the determination of
the costs.
Conclusion
These products have been approved by the aviation authority of
another country and are approved for operation in the United States.
Pursuant to the FAA's bilateral agreement with this State of Design
Authority, it has notified the FAA of the unsafe condition described in
the MCAI referenced above. The FAA reviewed the relevant data and
determined that air safety requires adopting this AD as proposed.
Accordingly, the FAA is issuing this AD to address the unsafe condition
on these products. Except for minor editorial changes, this AD is
adopted as proposed in the NPRM.
Material Incorporated by Reference Under 1 CFR Part 51
The FAA reviewed Transport Canada AD CF-2023-60, which identifies
the affected gas generator case to turbine support case retaining bolts
and specifies procedures for repetitive BSIs and replacement.
This material is reasonably available because the interested
parties have access to it through their normal course of business or by
the means identified in the ADDRESSES section.
Differences Between This AD and the MCAI
Where the service information referenced in Transport Canada AD CF-
2023-60 requires reporting certain information to the manufacturer,
this AD does not require such a submission.
Costs of Compliance
The FAA estimates that this AD affects 521 engines installed on
airplanes of U.S. registry.
The FAA estimates the following costs to comply with this AD:
Estimated Costs
----------------------------------------------------------------------------------------------------------------
Cost per Cost on U.S.
Action Labor cost Parts cost product operators
----------------------------------------------------------------------------------------------------------------
BSI of gas generator case to turbine 2 work-hours x $85 per $0 $170 $88,570
support case retaining bolts. hour = $170.
----------------------------------------------------------------------------------------------------------------
The FAA estimates the following costs to do any necessary
replacements that are required based on the results of the inspection.
The agency has no way of determining the number of engines that might
need these replacements:
[[Page 12681]]
On-Condition Costs
----------------------------------------------------------------------------------------------------------------
Cost per
Action Labor cost Parts cost product
----------------------------------------------------------------------------------------------------------------
Replacement of the gas generator case to 4 work-hours x $85 per hour = $337,701 $338,041
turbine support case retaining bolts. $340.
----------------------------------------------------------------------------------------------------------------
Authority for This Rulemaking
Title 49 of the United States Code specifies the FAA's authority to
issue rules on aviation safety. Subtitle I, section 106, describes the
authority of the FAA Administrator. Subtitle VII: Aviation Programs,
describes in more detail the scope of the Agency's authority.
The FAA is issuing this rulemaking under the authority described in
Subtitle VII, Part A, Subpart III, Section 44701: General requirements.
Under that section, Congress charges the FAA with promoting safe flight
of civil aircraft in air commerce by prescribing regulations for
practices, methods, and procedures the Administrator finds necessary
for safety in air commerce. This regulation is within the scope of that
authority because it addresses an unsafe condition that is likely to
exist or develop on products identified in this rulemaking action.
Regulatory Findings
This AD will not have federalism implications under Executive Order
13132. This AD will not have a substantial direct effect on the States,
on the relationship between the national government and the States, or
on the distribution of power and responsibilities among the various
levels of government.
For the reasons discussed above, I certify that this AD:
(1) Is not a ``significant regulatory action'' under Executive
Order 12866,
(2) Will not affect intrastate aviation in Alaska, and
(3) Will not have a significant economic impact, positive or
negative, on a substantial number of small entities under the criteria
of the Regulatory Flexibility Act.
List of Subjects in 14 CFR Part 39
Air transportation, Aircraft, Aviation safety, Incorporation by
reference, Safety.
The Amendment
Accordingly, under the authority delegated to me by the
Administrator, the FAA amends 14 CFR part 39 as follows:
PART 39--AIRWORTHINESS DIRECTIVES
0
1. The authority citation for part 39 continues to read as follows:
Authority: 49 U.S.C. 106(f), 40113, 44701.
Sec. 39.13 [Amended]
0
2. The FAA amends Sec. 39.13 by adding the following new airworthiness
directive:
2025-05-13 Pratt & Whitney Canada Corp.: Amendment 39-22985; Docket
No. FAA-2024-2539; Project Identifier MCAI-2023-00971-E.
(a) Effective Date
This airworthiness directive (AD) is effective April 23, 2025.
(b) Affected ADs
None.
(c) Applicability
This AD applies to Pratt & Whitney Canada Corp. (P&WC) Model
PW535E and PW535E1 engines, as identified in Transport Canada Civil
Aviation AD CF-2023-60, dated August 14, 2023 (Transport Canada AD
CF-2023-60).
(d) Subject
Joint Aircraft System Component (JASC) Code 7250, Turbine
Section.
(e) Unsafe Condition
This AD was prompted by a manufacturer design review that
indicated certain flange bolts securing the gas generator case and
turbine support case have an inadequate low-cycle fatigue life. The
FAA is issuing this AD to prevent crack, fracture, missing, or
loosening of the gas generator case to turbine support case
retaining bolts. The unsafe condition, if not addressed, could
result in uncontained engine debris, damage to the engine, and
damage to the airplane.
(f) Compliance
Comply with this AD within the compliance times specified,
unless already done.
(g) Required Actions
Except as specified in paragraphs (h) and (i) of this AD:
Perform all required actions within the compliance times specified
in, and in accordance with, Transport Canada AD CF-2023-60.
(h) Exceptions to Transport Canada AD CF-2023-60
(1) Where Transport Canada AD CF-2023-60 requires compliance
from its effective date, this AD requires using the effective date
of this AD.
(2) Where paragraph A.1. of Transport Canada AD CF-2023-60
refers to ``discrepancy,'' this AD defines that as ``evidence of
bolt cracks, bolt fracture, missing bolts, or loose bolts.''
(3) Where paragraph A.2. in Transport Canada AD CF-2023-60
specifies to ``Repeat the above paragraph A.1. inspection and
rectification requirements of this AD at intervals not to exceed 400
engine cycles,'' this AD requires replacing that text with ``Repeat
the above paragraph A.1. inspection and rectification requirements
of this AD thereafter at intervals not to exceed 400 engine
cycles.''
(4) Where paragraph A.1. in Transport Canada AD CF-2023-60
specifies to ``Inspect the bolts P/N MS9696-08 and P/N MS9489-06
within 400 cycles from the effective date of this AD,'' this AD
requires replacing that text with ``Inspect affected bolts having P/
N MS9696-08 and P/N MS9489-06 within 400 engine cycles from the
effective date of this AD.''
(5) Where paragraph A.1. in Transport Canada AD CF-2023-60
specifies to ``rectify any discrepancy in accordance with the
Accomplishment Instructions of the applicable SB,'' this AD requires
replacing that text with ``Following inspection, if any bolts are
determined to be in an unserviceable condition, before further
flight, replace the affected bolts in accordance with the applicable
SB.''
(i) No Reporting Requirement
Although the service information referenced in Transport Canada
AD CF-2023-60 specifies to submit certain information to the
manufacturer, this AD does not include that requirement.
(j) Alternative Methods of Compliance (AMOCs)
The Manager, AIR-520 Continued Operational Safety Branch, FAA,
has the authority to approve AMOCs for this AD, if requested using
the procedures found in 14 CFR 39.19. In accordance with 14 CFR
39.19, send your request to your principal inspector or local Flight
Standards District Office, as appropriate. If sending information
directly to the manager of the AIR-520 Continued Operational Safety
Branch, send it to the attention of the person identified in
paragraph (k) of this AD and email to: <a href="/cdn-cgi/l/email-protection#21606c6e62614740400f464e57"><span class="__cf_email__" data-cfemail="bffef2f0fcffd9dede91d8d0c9">[email protected]</span></a>.
(2) Before using any approved AMOC, notify your appropriate
principal inspector, or lacking a principal inspector, the manager
of the local flight standards district office/certificate holding
district office.
(k) Additional Information
For more information about this AD, contact Barbara Caufield,
Aviation Safety Engineer, FAA, 2200 South 216th Street, Des
[[Page 12682]]
Moines, WA 98198; phone: (781) 238-7146; email:
<a href="/cdn-cgi/l/email-protection#492b283b2b283b28672a283c2f202c252d092f2828672e263f"><span class="__cf_email__" data-cfemail="ccaeadbeaeadbeade2afadb9aaa5a9a0a88caaadade2aba3ba">[email protected]</span></a>.
(l) Material Incorporated by Reference
(1) The Director of the Federal Register approved the
incorporation by reference of the material listed in this paragraph
under 5 U.S.C. 552(a) and 1 CFR part 51.
(2) You must use this material as applicable to do the actions
required by this AD, unless the AD specifies otherwise.
(i) Transport Canada AD CF-2023-60, dated August 14, 2023.
(ii) [Reserved]
(3) For Transport Canada material identified in this AD, contact
Transport Canada, Transport Canada National Aircraft Certification,
159 Cleopatra Drive, Nepean, Ontario K1A 0N5, Canada; phone: (888)
663-3639; email: <a href="/cdn-cgi/l/email-protection#d48097fa95bda6a3bba6a0bcbdbab1a7a790bda6b1b7a0bda2b1a7f997bbbaa7bdb3bab1a7b0b1bab5a2bdb3b5b6bdb8bda0b1fa809794a0b7fab3b7fab7b5"><span class="__cf_email__" data-cfemail="80d4c3aec1e9f2f7eff2f4e8e9eee5f3f3c4e9f2e5e3f4e9f6e5f3adc3efeef3e9e7eee5f3e4e5eee1f6e9e7e1e2e9ece9f4e5aed4c3c0f4e3aee7e3aee3e1">[email protected]</span></a>; website: tc.canada.ca/en/
aviation.
(4) You may view this material at the FAA, Airworthiness
Products Section, Operational Safety Branch, 1200 District Avenue,
Burlington, MA 01803. For information on the availability of this
material at the FAA, call (817) 222-5110.
(5) You may view this material at the National Archives and
Records Administration (NARA). For information on the availability
of this material at NARA, visit <a href="http://www.archives.gov/federal-register/cfr/ibr-locations">www.archives.gov/federal-register/cfr/ibr-locations</a> or email <a href="/cdn-cgi/l/email-protection#94f2e6bafdfae7e4f1f7e0fdfbfad4faf5e6f5baf3fbe2"><span class="__cf_email__" data-cfemail="bbddc995d2d5c8cbded8cfd2d4d5fbd5dac9da95dcd4cd">[email protected]</span></a>.
Issued on March 6, 2025.
Peter A. White,
Deputy Director, Integrated Certificate Management Division, Aircraft
Certification Service.
[FR Doc. 2025-04441 Filed 3-18-25; 8:45 am]
BILLING CODE 4910-13-P
</pre><script data-cfasync="false" src="/cdn-cgi/scripts/5c5dd728/cloudflare-static/email-decode.min.js"></script></body>
</html>Indexed from Federal Register on March 19, 2025.
This is legal information, not legal advice. Laws vary by jurisdiction and change frequently. Always verify current law with official sources and consult a licensed attorney in your jurisdiction for advice on your specific situation.