Notice2024-28422
Petition for Modification of Application of Existing Mandatory Safety Standard
Primary source
Metadata and text below are from the Federal Register, a public-domain U.S. government work. Always verify the official published version before relying on it for any legal matter.
Published
December 5, 2024
Issuing agencies
Labor DepartmentMine Safety and Health Administration
Abstract
This notice is a summary of a petition for modification submitted to the Mine Safety and Health Administration (MSHA) by South32 Hermosa Inc.
Full Text
<html>
<head>
<title>Federal Register, Volume 89 Issue 234 (Thursday, December 5, 2024)</title>
</head>
<body><pre>
[Federal Register Volume 89, Number 234 (Thursday, December 5, 2024)]
[Notices]
[Pages 96692-96694]
From the Federal Register Online via the Government Publishing Office [<a href="http://www.gpo.gov">www.gpo.gov</a>]
[FR Doc No: 2024-28422]
-----------------------------------------------------------------------
DEPARTMENT OF LABOR
Mine Safety and Health Administration
Petition for Modification of Application of Existing Mandatory
Safety Standard
AGENCY: Mine Safety and Health Administration, Labor.
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: This notice is a summary of a petition for modification
submitted to the Mine Safety and Health Administration (MSHA) by
South32 Hermosa Inc.
DATES: All comments on the petition must be received by MSHA's Office
of Standards, Regulations, and Variances on or before January 6, 2025.
ADDRESSES: You may submit comments identified by Docket No. MSHA-2024-
0088 by any of the following methods:
1. Federal eRulemaking Portal: <a href="https://www.regulations.gov">https://www.regulations.gov</a>. Follow
the instructions for submitting comments for MSHA-2024-0088.
2. Fax: 202-693-9441.
3. Email: <a href="/cdn-cgi/l/email-protection#b2c2d7c6dbc6dbdddcd1dddfdfd7dcc6c1f2d6ddde9cd5ddc4"><span class="__cf_email__" data-cfemail="077762736e736e686964686a6a626973744763686b29606871">[email protected]</span></a>.
4. Regular Mail or Hand Delivery: MSHA, Office of Standards,
Regulations, and Variances, 201 12th Street South, 4th Floor West,
Arlington, Virginia 22202-5452.
Attention: S. Aromie Noe, Director, Office of Standards,
Regulations, and Variances. Persons delivering documents are required
to check in at the receptionist's desk, 4th Floor West. Individuals may
inspect copies of the petition and comments during normal business
hours at the address listed above. Before visiting MSHA in person, call
202-693-9455 to make an appointment.
FOR FURTHER INFORMATION CONTACT: S. Aromie Noe, Office of Standards,
Regulations, and Variances at 202-693-9440 (voice),
<a href="/cdn-cgi/l/email-protection#f4a491809d809d9b9a87929b86999b909d929d9795809d9b9ab4909b98da939b82"><span class="__cf_email__" data-cfemail="134376677a677a7c7d60757c617e7c777a757a7072677a7c7d53777c7f3d747c65">[email protected]</span></a> (email), or 202-693-9441 (fax). [These
are not toll-free numbers.]
SUPPLEMENTARY INFORMATION: Section 101(c) of the Federal Mine Safety
and Health Act of 1977 and title 30 of the Code of Federal Regulations
(CFR) part 44 govern the application, processing, and disposition of
petitions for modification.
I. Background
Section 101(c) of the Federal Mine Safety and Health Act of 1977
(Mine Act) allows the mine operator or representative of miners to file
a petition to modify the application of any mandatory safety standard
to a coal or other mine if the Secretary of Labor determines that:
1. An alternative method of achieving the result of such standard
exists which will at all times guarantee no less than the same measure
of protection afforded the miners of such mine by such standard; or
2. The application of such standard to such mine will result in a
diminution of safety to the miners in such mine.
In addition, sections 44.10 and 44.11 of 30 CFR establish the
requirements for filing petitions for modification.
II. Petition for Modification
Docket Number: M-2024-003-M.
Petitioner: South32 Hermosa, Inc., 749 Harshaw Rd., Patagonia, AZ
85624.
Mine: Hermosa Mine, MSHA ID No. 02-03398, located in Santa Cruz
County, Arizona.
Regulation Affected: 30 CFR 57.11052(d) (Refuge areas).
Modification Request: The petitioner is seeking a modification for
30 CFR 57.11052(d), Refuge areas. Specifically, the petitioner is
seeking the use of compressed air in lieu of compressed airlines and
bottled water in lieu of waterlines.
The petitioner states that:
(a) South32 Hermosa Inc. (Mine ID No. 02-03398) is a green field
project located in Santa Cruz County, Arizona. The mine will be an
underground open stoping mining method, and the ore zones will be
accessed through both a surface decline and a 25 feet diameter vertical
shaft. The mine plans to operate 24 hours per day, 7 days per week with
plans to employ between 400 and 500 miners across 4 rotations working
on 4- to 10-person crews. The mine is located approximately 10 miles
southeast of Patagonia, Arizona.
(b) South32 Hermosa Inc. requests approval to use portable MineARC
Refuge Chambers with occupancies of 4, 8, 12, 16 and 20 miners. As the
MineARC Refuge Chamber is equipped with a minimum of 72-hours of
onboard breathable air supply and 2.25 quarts of water per person per
day as required by 30 CFR 75.1507(d)(1), South32 Hermosa Inc. seeks
relief from having to provide an external compressed air and waterline
as required by 30 CFR 57.11052(d).
(c) In support of the Petition, South32 Hermosa Inc. ensures that
the proposed alternative is as safe as 30 CFR 57.11052(d) by the
following means:
(1) The reliability of the refuge is enhanced by making it self-
contained as the source of water and air would not be dependent on the
installation of external airlines or waterlines that would be
susceptible to rock fall, fire, or mechanical damage in an emergency.
(2) Waterlines in the mine would not be potable and therefore not
drinkable. Supplying onboard water ensures refuge occupants do not
succumb to dehydration.
(3) The compressor feeding the compressed air lines shall be
located on the surface, which is more than 2,500 vertical feet to the
refuge. Over this distance there is substantial pressure loss making it
difficult to provide 12.5 cubic feet per minute (cfm) of breathable air
for each person as required by 30 CFR 7.506(c). Supplying onboard
breathable air for a minimum of 72 hours guarantees oxygen and carbon
dioxide levels remain within requisite limits respectively.
(4) The portable refuge chambers are designed to be moved regularly
to be as close as possible to the miners' work locations. This ensures
that miners have quicker access to a refuge chamber in the event of an
emergency.
(5) Internal/external gas monitoring ensures occupants can maintain
breathable air inside of the refuge and monitor the conditions outside
in case of a need to exit the refuge.
(6) A split-system air conditioning system ensures that the
internal apparent temperature remains below 95 [deg]F regardless of the
mine temperature.
(7) An airlock significantly reduces the risk of carbon monoxide
entering the refuge and ensures mine rescue crews do not need to
barricade into a potentially unknown atmosphere.
(8) A carbon monoxide scrubbing system removes any carbon monoxide
brought inside during the entry process from the occupants.
(9) Permitting the use of compressed oxygen and carbon dioxide
scrubbing
[[Page 96693]]
and onboard water improves the portability of the refuge area, allowing
the flexibility of installing refuge areas near the working areas in
the mine.
(10) Locating portable refuges throughout the mine where they can
be reached within 2,500 ft exceeds 30 CFR 57.11050(b).
(d) The mine is not yet in operation and there are currently no
MineARC refuge chambers onsite. If MSHA needs to view a refuge chamber
as a part of its PFM investigation, one can be made available to view
at MineARC Systems' facility in Dallas, Texas.
(e) The Petitioner asserts that the alternate method proposed will
at all times guarantee no less than the same measure of protection
afforded the miners under the mandatory standard.
The petitioner proposes the following alternative method:
(a) Refuge areas shall be:
(1) Of fire-resistant construction, preferably in untimbered areas
of the mine;
(2) Large enough to accommodate readily the normal number of
persons in the particular area of the mine;
(3) Constructed so they can be made gastight; and
(4) Provided with compressed air lines, waterlines, suitable hand
tools, and stopping materials.
(b) The MineARC Refuge Chambers shall provide the same measure of
protection afforded to miners by the standard by including the
following features:
(1) A flame-resistant exterior steel structure.
(2) An entry door with double locking handles and seals on all four
sides.
(3) An airlock with a supply of high pressure compressed air
cylinders (Grade D) capable of providing 2 x volumetric flushes per
entry.
(4) One-way pressure relief valves to limit the internal pressure
to less than 400 pascals (Pa).
(5) A supply of 1.32 cubic feet of compressed oxygen (aviator's)
per hour per person for the rated duration of refuge as required by 30
CFR 7.506(d)(2).
(6) A primary and backup flowmeter for regulating the flow of
oxygen inside the refuge.
(7) Pre-packaged carbon dioxide removal chemicals capable of
removing carbon dioxide at the rate of 1.08 cubic feet per person per
hour for the maximum rated occupancy and duration as required by 30 CFR
7.508(a)(2)(ii).
(8) Pre-packaged chemical for the removal of carbon monoxide for
the rated duration.
(9) Internal atmosphere monitoring for apparent temperature,
oxygen, carbon dioxide, and carbon monoxide.
(10) External gas monitoring for oxygen and carbon monoxide.
(11) Drinking water supply of 2.25 quarts per person per day for
the rated duration as required by 30 CFR 75.1507(d)(1).
(12) Emergency food rations supply of 2,000 calories per person per
day for the rated duration as required by 30 CFR 75.1507(d)(1).
(13) A split system air conditioning system to maintain the
internal temperature below an internal 95 [deg]F Apparent Temperature
as required by 30 CFR 7.504(b).
(14) A 20-pound multipurpose dry chemical fire extinguisher.
(15) A first aid kit that complies with MSHA Standard 30 CFR
75.1713-7.
(16) Repair materials and tools in case there is any damage during
use.
(17) A means of communication with the surface (e.g., radio,
phone).
(18) An uninterruptible power supply (UPS) battery backup system
designed for the rated duration.
(19) A 5-gallon chemical toilet for human waste.
(20) Written operating instructions for activating the refuge in an
emergency.
(c) Each refuge shall be examined regularly per the manufacturer's
instructions. This includes the below intervals.
(1) Weekly Inspection:
(i) Confirm entry door tamper proof seal is in place.
(ii) Ensure external status lights are correct.
(iii) Check for damage and walk-around exterior.
(iv) Check expiration dates of consumables (decal viewable from
outside of refuge via portal window).
(2) Bi-Annual Inspection:
(i) Replace one way pressure relief valves.
(ii) Confirm operation of all life support systems.
(iii) Check pressures for all compressed air and oxygen cylinders.
(iv) Confirm quantities and expirations of all consumables.
(v) Load test batteries.
(vi) Calibrate gas monitors.
(vii) Service air conditioning system.
(viii) Test communication system(s).
(d) Every miner at Hermosa shall be trained on the use and
operation of the refuge chamber at least bi-annually. This shall
include the following:
(1) Watching the manufacturer's operator training video.
(2) Instructions on when to deploy the refuge chamber.
(3) Being aware that interior carbon dioxide levels shall maintain
less than 1 percent.
(4) Being aware that the interior oxygen levels shall remain
between 18.5 percent and 23 percent.
(5) Hazards associated with compressed oxygen systems.
(6) Where to locate items such as first aid, repair materials, and
communications inside the refuge.
(e) MineARC Refuge chambers, with capacities ranging in size from 4
to 20 miners and a rated duration of 72 hours, shall be utilized. Each
refuge shall be conspicuously labelled with `REFUGE' and the maximum
designated number of miners on the front wall.
(f) The MineARC models shall be selected dependent on number of
mine workers in each area of the underground mine. Refuge chambers
shall be strategically located underground considering the higher of
the below criteria:
(1) The amount of personnel underground at any one time considering
additional capacity for visitors, geologists, engineers, and
management, etc.
(2) A maximum travel distance of 2,500 ft to any refuge chamber.
(g) Prior to locating a portable refuge chamber the location shall
be examined for the following:
(1) Located a safe distance away from any hazardous areas that are
potentially explosive or a fire source such as:
(i) Explosive magazines or storage containers.
(ii) Electrical transformers.
(iii) Fuel storage facilities.
(iv) Blasting operations.
(v) Vehicle parking bays.
(2) Located in competent ground (the surrounding area examined for
faults, fractures, and dykes).
(3) Located where water cannot accumulate.
(4) Located in a position that does not expose the refuge chamber
to vehicle or machinery damage.
(5) Posted with directional signs and/or a green light leading to
the refuge location.
(6) Before being placed back into service, the refuge shall be
examined for any damage.
(h) The introduction of any new piece of equipment shall be
evaluated in terms of the mine's emergency response plan and safety of
the miners.
(i) Permanently built refuge chambers shall be on the main intake
haulages. These permanent refuges shall include all of the same
features as the portables except for using bulkhead walls to seal a
dead-end heading in lieu of an exterior steel structure.
(j) Applicable revisions or appropriate changes to the MSHA 30 CFR
part 48 training plan regarding the conditions in
[[Page 96694]]
the Proposed Decision and Order granted by MSHA shall be submitted to
the MSHA District Manager for revision and approval prior to
implementation of the training plan by South32 Hermosa.
(k) The Petitioner asserts that this Petition for Modification of
Application of Mandatory Standard has been posted on the mine bulletin
board at the Hermosa Mine as of October 17, 2024, and there are no
representatives of miners at this operation.
In support of the proposed alternative method, the Petitioner has
also submitted: a schematic diagram of a typical MineARC refuge
chamber, a table of MineARC refuge chamber models, a table of fire
hazards in the mine, a mine map showing locations of initial refuges, a
MineARC refuge chamber layout drawing example, MineARC refuge chamber
operating procedures, and a MineARC refuge chamber brochure.
The Petitioner asserts that the alternate method proposed will at
all times guarantee no less than the same measure of protection
afforded the miners under the mandatory standard.
Song-ae Aromie Noe,
Director, Office of Standards, Regulations, and Variances.
[FR Doc. 2024-28422 Filed 12-4-24; 8:45 am]
BILLING CODE 4520-43-P
</pre><script data-cfasync="false" src="/cdn-cgi/scripts/5c5dd728/cloudflare-static/email-decode.min.js"></script></body>
</html>Indexed from Federal Register on December 5, 2024.
This is legal information, not legal advice. Laws vary by jurisdiction and change frequently. Always verify current law with official sources and consult a licensed attorney in your jurisdiction for advice on your specific situation.