Rule2024-25784
Airworthiness Directives; Safran Aerosystems (Formerly AVOX Systems Inc.; Scott Aviation) Oxygen Cylinder and Valve Assemblies, and Oxygen Valve Assemblies
Primary source
Metadata and text below are from the Federal Register, a public-domain U.S. government work. Always verify the official published version before relying on it for any legal matter.
Published
November 7, 2024
Effective
November 26, 2024
Issuing agencies
Transportation DepartmentFederal Aviation Administration
Abstract
The FAA is correcting an airworthiness directive (AD) that was published in the Federal Register. That AD applies to certain Safran Aerosystems oxygen cylinder and valve assemblies, and oxygen valve assemblies, installed on but not limited to various transport airplanes. As published, the AD number of the AD being removed in the amendatory language of AD 2024-19-15 is incorrect, and the manufacturer name in the applicability and material required to be followed for identification of affected serial numbers in one location contains a typographical error. This document corrects those errors. In all other respects, the original document remains the same.
Full Text
<html>
<head>
<title>Federal Register, Volume 89 Issue 216 (Thursday, November 7, 2024)</title>
</head>
<body><pre>
[Federal Register Volume 89, Number 216 (Thursday, November 7, 2024)]
[Rules and Regulations]
[Pages 88115-88118]
From the Federal Register Online via the Government Publishing Office [<a href="http://www.gpo.gov">www.gpo.gov</a>]
[FR Doc No: 2024-25784]
========================================================================
Rules and Regulations
Federal Register
________________________________________________________________________
This section of the FEDERAL REGISTER contains regulatory documents
having general applicability and legal effect, most of which are keyed
to and codified in the Code of Federal Regulations, which is published
under 50 titles pursuant to 44 U.S.C. 1510.
The Code of Federal Regulations is sold by the Superintendent of Documents.
========================================================================
Federal Register / Vol. 89, No. 216 / Thursday, November 7, 2024 /
Rules and Regulations
[[Page 88115]]
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. FAA-2024-0759; Project Identifier AD-2023-01040-T;
Amendment 39-22857; AD 2024-19-15]
RIN 2120-AA64
Airworthiness Directives; Safran Aerosystems (Formerly AVOX
Systems Inc.; Scott Aviation) Oxygen Cylinder and Valve Assemblies, and
Oxygen Valve Assemblies
AGENCY: Federal Aviation Administration (FAA), DOT.
ACTION: Final rule; correction.
-----------------------------------------------------------------------
SUMMARY: The FAA is correcting an airworthiness directive (AD) that was
published in the Federal Register. That AD applies to certain Safran
Aerosystems oxygen cylinder and valve assemblies, and oxygen valve
assemblies, installed on but not limited to various transport
airplanes. As published, the AD number of the AD being removed in the
amendatory language of AD 2024-19-15 is incorrect, and the manufacturer
name in the applicability and material required to be followed for
identification of affected serial numbers in one location contains a
typographical error. This document corrects those errors. In all other
respects, the original document remains the same.
DATES: This correction is effective November 26, 2024. The effective
date of AD 2024-19-15 remains November 26, 2024.
The Director of the Federal Register approved the incorporation by
reference of certain publications listed in this AD as of November 26,
2024 (89 FR 84267, October 22, 2024).
The Director of the Federal Register approved the incorporation by
reference of certain other publications listed in this AD as of
September 5, 2023 (88 FR 50011, August 1, 2023).
ADDRESSES:
AD Docket: You may examine the AD docket at <a href="http://regulations.gov">regulations.gov</a> by
searching for and locating Docket No. FAA-2024-0759; or in person at
Docket Operations between 9 a.m. and 5 p.m., Monday through Friday,
except Federal holidays. The AD docket contains this final rule;
correction, any comments received, and other information. The street
address for Docket Operations is U.S. Department of Transportation,
Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200
New Jersey Avenue SE, Washington, DC 20590.
Material Incorporated by Reference:
<bullet> For AVOX and Safran Aerosystems material identified in
this AD, contact AVOX Systems Inc., 225 Erie Street, Lancaster, NY
14086; telephone 716-683-5100; website <a href="http://safranaerosystems.com">safranaerosystems.com</a>.
<bullet> You may view this material at the FAA, Airworthiness
Products Section, Operational Safety Branch, 2200 South 216th St., Des
Moines, WA. For information on the availability of this material at the
FAA, call 206-231-3195. It is also available at <a href="http://regulations.gov">regulations.gov</a> under
Docket No. FAA-2024-0759.
FOR FURTHER INFORMATION CONTACT: Gabriel Kim, Aviation Safety Engineer,
FAA, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; telephone 516-
228-7300; email <a href="/cdn-cgi/l/email-protection#96afbbf7e0e5bbf8eff7f5f9bbf5f9e5d6f0f7f7b8f1f9e0"><span class="__cf_email__" data-cfemail="033a2e6275702e6d7a62606c2e606c70436562622d646c75">[email protected]</span></a>.
SUPPLEMENTARY INFORMATION:
Background
AD 2024-19-15, Amendment 39-22857 (89 FR 84267, October 22, 2024)
(AD 2024-19-15), requires inspecting the oxygen valve assemblies, and
oxygen cylinder and valve assemblies, to determine the serial number of
the valve, cylinder, and entire assembly; inspecting certain assemblies
and parts for correct spacing of the gap between the bottom of the
packing retainer and top of the valve body on the assemblies, and
replacing assemblies having unacceptable gaps; limits the installation
of affected parts; and requires reporting inspection results and
returning certain assemblies to the manufacturer. This AD applies to
certain Safran Aerosystems oxygen cylinder and valve assemblies, and
oxygen valve assemblies, installed on but not limited to various
transport airplanes.
Need for Correction
As published, the AD number of the AD being removed in the
amendatory language of AD 2024-19-15 is incorrect. Paragraph 2.a. of
the amendatory language refers to ``AD 2013-13-11.'' The correct AD
reference is ``AD 2023-13-11.''
Also as published, the manufacturer name in the introductory text
of paragraph (c) in the regulatory text of AD 2024-19-15 contains a
typographical error. The correct manufacturer name is ``Safran
Aerosystems.''
Also as published, the manufacturer name in the material identified
in the text of paragraph (l)(1) in the regulatory text of AD 2024-19-15
contains a typographical error. The correct manufacturer name is
``Safran Aerosystems.''
Material Incorporated by Reference Under 1 CFR Part 51
The FAA reviewed the following material. This material specifies
procedures for an inspection to determine the serial numbers of the
oxygen cylinder and valve assemblies, and the oxygen valve assemblies,
a detailed inspection for correct spacing of the gap between the bottom
of the packing retainer and top of the valve body on the assemblies,
parts marking, inspection report, and return of parts to the
manufacturer. These documents are distinct since they apply to
different assembly part numbers.
<bullet> Safran Aerosystems Alert Service Bulletin 10015804-35-01,
Revision 04, dated November 9, 2023.
<bullet> Safran Aerosystems Alert Service Bulletin 10015804-35-02,
Revision 06, dated August 30, 2023.
<bullet> Safran Aerosystems Alert Service Bulletin 10015804-35-03,
Revision 05, dated September 29, 2023.
This AD also requires the following material, which the Director of
the Federal Register approved for incorporation by reference as of
September 5, 2023 (88 FR 50011, August 1, 2023).
<bullet> AVOX Systems Inc. Alert Service Bulletin 10015804-35-01,
Revision 03, dated June 7, 2021.
<bullet> AVOX Systems Inc. Alert Service Bulletin 10015804-35-02,
Revision 03, dated March 11, 2022.
<bullet> AVOX Systems Inc. Alert Service Bulletin 10015804-35-03,
Revision 03, dated June 18, 2021.
[[Page 88116]]
This material is reasonably available because the interested
parties have access to it through their normal course of business or by
the means identified in the ADDRESSES section.
Correction of Publication
This document corrects three errors and correctly adds the AD as an
amendment to 14 CFR 39.13. Although no other part of the preamble or
regulatory information has been corrected, the FAA is publishing the
entire rule in the Federal Register.
The effective date of this AD remains November 26, 2024.
Since this action only corrects an incorrect AD number and two
typographical errors, it has no adverse economic impact and imposes no
additional burden on any person. Therefore, the FAA has determined that
notice and public comment procedures are unnecessary.
List of Subjects in 14 CFR Part 39
Air transportation, Aircraft, Aviation safety, Incorporation by
reference, Safety.
Adoption of the Amendment
Accordingly, pursuant to the authority delegated to me by the
Administrator, the FAA amends part 39 of the Federal Aviation
Regulations (14 CFR part 39) as follows:
PART 39--AIRWORTHINESS DIRECTIVES
0
1. The authority citation for part 39 continues to read as follows:
Authority: 49 U.S.C. 106(g), 40113, 44701.
Sec. 39.13 [Corrected]
0
2. The FAA amends Sec. 39.13 by:
0
a. Removing Airworthiness Directive (AD) 2023-13-11, Amendment 39-22496
(88 FR 50011, August 1, 2023); and
0
b. Adding the following new AD:
2024-19-15 Safran Aerosystems (formerly AVOX Systems Inc.; Scott
Aviation): Amendment 39-22857; Docket No. FAA-2024-0759; Project
Identifier AD-2023-01040-T.
(a) Effective Date
This airworthiness directive (AD) is effective November 26,
2024.
(b) Affected ADs
This AD replaces AD 2023-13-11, Amendment 39-22496 (88 FR 50011,
August 1, 2023) (AD 2023-13-11).
(c) Applicability
This AD applies to Safran Aerosystems (formerly AVOX Systems
Inc.; Scott Aviation) oxygen cylinder and valve assemblies having
part number (P/N) 89794050, 89794077, 89794015, 891511-14, 806835-
01, 807982-01, 808433-01, or 891311-14; and oxygen valve assemblies
(body and gage assemblies) having P/N 807206-01. These assemblies
might be installed on, but not limited to, the aircraft identified
in paragraphs (c)(1) through (12) of this AD, certificated in any
category.
(1) Airbus SAS Model A300 B2-1A, B2-1C, B2K-3C, B2-203, B4-2C,
B4-103, and B4-203 airplanes.
(2) Airbus SAS Model A300 B4-601, B4-603, B4-620, B4-622, B4-
605R, B4-622R, F4-605R, F4-622R, and C4-605R Variant F airplanes.
(3) Airbus SAS Model A310-203, -204, -221, -222, -304, -322, -
324, and -325 airplanes.
(4) Airbus SAS Model A318-111, -112, -121, and -122 airplanes.
(5) Airbus SAS Model A319-111, -112, -113, -114, -115, -131, -
132, -133, and -151N airplanes.
(6) Airbus SAS Model A320-211, -212, -214, -216, -231, -232, -
233, -251N, -252N, -253N, -271N, -272N, and -273N airplanes.
(7) Airbus SAS Model A321-111, -112, -131, -211, -212, -213, -
231, -232, -251N, -252N, -253N, -271N, -272N, -251NX, -252NX, -
253NX, -271NX, and -272NX airplanes.
(8) Airbus SAS Model A330-201, -202, -203, -223, -243, -301, -
302, -303, -321, -322, -323, -341, -342, -343, and -941 airplanes.
(9) Airbus Model A340-211, -212, -213, -311, -312, -313, -541,
and -642 airplanes.
(10) ATR-GIE Avions de Transport R[eacute]gional Model ATR42-
200, -300, -320, and -500 airplanes.
(11) ATR-GIE Avions de Transport R[eacute]gional Model ATR72-
101, -102, -201, -202, -211, -212, and -212A airplanes.
(12) The Boeing Company Model 747-8 series airplanes.
(d) Subject
Air Transport Association (ATA) of America Code 35, Oxygen.
(e) Unsafe Condition
This AD was prompted by reports of cylinder and valve assemblies
having oxygen leakage from the valve assembly vent hole, caused by
the absence of a guide that maintains appropriate spacing between
certain parts, and by the manufacturer identifying additional
assemblies and parts affected by the unsafe condition. The FAA is
issuing this AD to address oxygen leakage from cylinder and valve
assemblies. The unsafe condition, if not addressed, could result in
decreased or insufficient oxygen supply during a depressurization
event; and heating or flow friction, which could cause an ignition
event in the valve assembly.
(f) Compliance
Comply with this AD within the compliance times specified,
unless already done.
(g) Retained Definition of Detailed Inspection, With No Changes
This paragraph restates the requirements of paragraph (g) of AD
2023-13-11, with no changes. For the purposes of this AD, a detailed
inspection is an intensive examination of a specific item,
installation, or assembly to detect damage, failure, or
irregularity. Available lighting is normally supplemented with a
direct source of good lighting at an intensity deemed appropriate.
Inspection aids such as mirror, magnifying lenses, etc., may be
necessary. Surface cleaning and elaborate procedures may be
required.
(h) Retained Identification of Affected Cylinder and Valve Assemblies,
With Updated Language
This paragraph restates the requirements of paragraph (h) of AD
2023-13-11, with updated language. Within 60 days after September 5,
2023 (the effective date of AD 2023-13-11), inspect the oxygen valve
assemblies, and oxygen cylinder and valve assemblies, to determine
if the serial numbers of the valve, cylinder, and entire assembly,
are listed in Appendix 1 or Appendix 2, ``Affected Shipments,'' of
the applicable material identified in paragraphs (h)(1) through (3)
of this AD. A review of airplane maintenance records is acceptable
in lieu of this inspection if the serial numbers can be conclusively
determined from that review.
(1) AVOX Systems Inc. Alert Service Bulletin 10015804-35-01,
Revision 03, dated June 7, 2021.
(2) AVOX Systems Inc. Alert Service Bulletin 10015804-35-02,
Revision 03, dated March 11, 2022.
(3) AVOX Systems Inc. Alert Service Bulletin 10015804-35-03,
Revision 03, dated June 18, 2021.
(i) Retained Inspection of the Gap, Parts Marking Actions, and
Replacement, With Updated Language
This paragraph restates the requirements of paragraph (i) of AD
2023-13-11, with updated language. If, during any inspection or
records review required by paragraph (h) of this AD, any oxygen
valve assembly, valve or cylinder of an oxygen cylinder and valve
assembly, or oxygen cylinder and valve assembly having an affected
serial number is found: Before further flight, do a detailed
inspection for correct spacing of the gap between the bottom of the
packing retainer and top of the valve body, in accordance with
paragraph 3.C. of the Accomplishment Instructions of the applicable
material identified in paragraphs (h)(1) through (3) of this AD.
(1) If the gap is found to be acceptable, as defined in the
applicable material identified in paragraphs (h)(1) through (3) of
this AD, before further flight, do the parts marking actions in
accordance with paragraph 3.D.(1) of the Accomplishment Instructions
of the applicable material identified in paragraphs (h)(1) through
(3) of this AD.
(2) If the gap is found to be unacceptable, as defined in the
material identified in paragraphs (h)(1) through (3) of this AD,
before further flight, remove the affected assembly, in accordance
with paragraphs 3.D.(2) or 3.D.(3), as applicable, of the
Accomplishment Instructions of the applicable material identified in
paragraphs (h)(1) through (3) of this AD; and replace with a
serviceable assembly.
[[Page 88117]]
(j) Retained Return of Parts, With Updated Language
This paragraph restates the requirement to return parts, as
specified in paragraph (j)(2) of AD 2023-13-11, with updated
language. If, during the inspection required by paragraph (i) of
this AD, any gap is found to be unacceptable, within the applicable
time specified in paragraph (j)(1) or (2) of this AD, return the
assembly to the manufacturer in accordance with paragraph 3.D.(2) or
3.D.(3), as applicable, of the Accomplishment Instructions of the
applicable material identified in paragraphs (h)(1) through (3) of
this AD, except you are not required to contact AVOX Systems Inc.
for shipping instructions.
(1) If the inspection was done on or after September 5, 2023
(the effective date of AD 2023-13-11): Return the assembly within 30
days after the inspection.
(2) If the inspection was done before September 5, 2023 (the
effective date of AD 2023-13-11): Return the assembly within 30 days
after September 5, 2023.
(k) Retained Parts Installation Limitation, With Updated Language
This paragraph restates the provisions of paragraph (k) of AD
2023-13-11, with updated language. As of September 5, 2023 (the
effective date of AD 2023-13-11), no AVOX Systems Inc. oxygen valve
assembly, or valve or cylinder that is part of an oxygen cylinder
and valve assembly, or oxygen cylinder and valve assembly having an
affected serial number identified in Appendix 1, ``Affected
Shipments,'' or Appendix 2, ``Affected Shipments,'' of any AVOX
Systems Inc. material identified in paragraphs (h)(1) through (3) of
this AD may be installed on any airplane unless the requirements of
paragraph (i) of this AD have been accomplished on that affected
assembly.
(l) New Identification of Additional Affected Cylinder and Valve
Assemblies
Within 60 days after the effective date of this AD, inspect the
oxygen valve assemblies, and oxygen cylinder and valve assemblies,
to determine if the serial numbers of the valve, cylinder, and
entire assembly, are listed in Appendix 3, ``Affected Shipments,''
of the applicable material identified in paragraphs (l)(1) through
(3) of this AD. A review of airplane maintenance records is
acceptable in lieu of this inspection if the serial numbers can be
conclusively determined from that review.
(1) Safran Aerosystems Alert Service Bulletin 10015804-35-01,
Revision 04, dated November 9, 2023, except as specified in
paragraphs (l)(1)(i) and (ii).
(i) In rows 2 through 492 of table tab ``89794077'' in Appendix
3 of Safran Aerosystems Alert Service Bulletin 10015804-35-01,
Revision 04, dated November 9, 2023, the list of numbers in the
``Valve Serial #'' and ``Cylinder Serial #'' columns have been
transposed with each other and the list of numbers in the ``Valve
Part #'' and ``Cylinder Part #'' columns have also been transposed
with each other.
(ii) In rows 2 through 65 of table tab 891511-14 in Appendix 3
of Safran Aerosystems Alert Service Bulletin 10015804-35-01,
Revision 04, dated November 9, 2023, the list of numbers in the
``Valve Serial #'' and ``Cylinder Serial #'' columns have been
transposed with each other, and the list of numbers in the ``Valve
Part #'' and ``Cylinder Part #'' columns have been transposed with
each other.
(2) Safran Aerosystems Alert Service Bulletin 10015804-35-02,
Revision 06, dated August 30, 2023.
(3) Safran Aerosystems Inc. Alert Service Bulletin 10015804-35-
03, Revision 05, dated September 29, 2023.
(m) New Inspection of the Gap, Parts Marking Actions, and Replacement
for Additional Parts
If, during any inspection or records review required by
paragraph (l) of this AD, any oxygen valve assembly, valve or
cylinder of an oxygen cylinder and valve assembly, or oxygen
cylinder and valve assembly having an affected serial number is
found: Before further flight, do a detailed inspection for correct
spacing of the gap between the bottom of the packing retainer and
top of the valve body, in accordance with paragraph 3.C. of the
Accomplishment Instructions of the applicable material identified in
paragraphs (l)(1) through (3) of this AD.
(1) If the gap is found to be acceptable, as defined in the
applicable material identified in paragraphs (l)(1) through (3) of
this AD, before further flight, do the parts marking actions in
accordance with paragraph 3.D.(1) of the Accomplishment Instructions
of the applicable material identified in paragraphs (l)(1) through
(3) of this AD.
(2) If the gap is found to be unacceptable, as defined in the
material identified in paragraphs (l)(1) through (3) of this AD,
before further flight, remove the affected assembly, in accordance
with paragraphs 3.D.(2) or 3.D.(3), as applicable, of the
Accomplishment Instructions of the applicable material identified in
paragraphs (l)(1) through (3) of this AD; and replace with a
serviceable assembly.
(n) New Return of Additional Parts
If, during the inspection required by paragraph (m) of this AD,
any gap is found to be unacceptable, within the applicable time
specified in paragraph (n)(1) or (2) of this AD, return the assembly
to the manufacturer in accordance with paragraph 3.D.(2) or 3.D.(3),
as applicable, of the Accomplishment Instructions of the applicable
material identified in paragraphs (l)(1) through (3) of this AD,
except you are not required to contact Safran Aerosystems for
shipping instructions.
(1) If the inspection was done on or after the effective date of
this AD: Return the assembly within 30 days after the inspection.
(2) If the inspection was done before the effective date of this
AD: Return the assembly within 30 days after the effective date of
this AD.
(o) New Parts Installation Limitation
As of the effective date of this AD, no AVOX Systems Inc. or
Safran Aerosystems oxygen valve assembly, or valve or cylinder that
is part of an oxygen cylinder and valve assembly, or oxygen cylinder
and valve assembly having an affected serial number identified in
Appendix 3, ``Affected Shipments,'' of any Safran Aerosystems Inc.
material identified in paragraphs (l)(1) through (3) of this AD may
be installed on any airplane unless the requirements of paragraph
(m) of this AD have been accomplished on that affected assembly.
(p) Credit for Previous Actions
(1) This paragraph provides credit for the actions specified in
paragraphs (h) or (i) of this AD, if those actions were performed
before September 5, 2023 (the effective date of AD 2023-13-11),
using the material specified in paragraphs (p)(1)(i) through (iii)
of this AD. This material is not incorporated by reference in this
AD.
(i) AVOX Systems Inc. Service Bulletin 10015804-35-01, dated
March 6, 2019; and AVOX Systems Inc. Alert Service Bulletin
10015804-35-01, Revision 01, dated July 9, 2019.
(ii) AVOX Systems Inc. Alert Service Bulletin 10015804-35-02,
Revision 1, dated September 4, 2019.
(iii) AVOX Systems Inc. Service Bulletin 10015804-35-03, dated
April 11, 2019; and AVOX Systems Inc. Alert Service Bulletin
10015804-35-03, Revision 01, dated May 21, 2019.
(2) This paragraph provides credit for the actions specified in
paragraphs (h) or (i) of this AD, if those actions were performed
before September 5, 2023 (the effective date of AD 2023-13-11),
using the material specified in paragraphs (p)(2)(i) through (iii)
of this AD, which was incorporated by reference in AD 2022-04-09.
(i) AVOX Systems Inc. Alert Service Bulletin 10015804-35-01,
Revision 02, dated October 16, 2019.
(ii) AVOX Systems Inc. Alert Service Bulletin 10015804-35-02,
Revision 2, dated October 31, 2019.
(iii) AVOX Systems Inc. Alert Service Bulletin 10015804-35-03,
Revision 02, dated October 15, 2019.
(3) This paragraph provides credit for the actions specified in
paragraphs (h), (i), (l), or (m) of this AD, if those actions were
performed before the effective date of this AD, using the material
specified in paragraphs (p)(3)(i) through (ii) of this AD. This
material is not incorporated by reference in this AD.
(i) AVOX Systems Inc. Alert Service Bulletin 10015804-35-02,
Revision 04, dated June 30, 2023; or Revision 05, dated August 14,
2023.
(ii) AVOX Systems Inc. Alert Service Bulletin 10015804-35-03,
Revision 04, dated June 12, 2023.
(q) Alternative Methods of Compliance (AMOCs)
(1) The Manager, East Certification Branch, FAA, has the
authority to approve AMOCs for this AD, if requested using the
procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19,
send your request to your principal inspector or responsible Flight
Standards Office, as appropriate. If sending information directly to
the manager of the East Certification Branch, send it to ATTN:
Program Manager, Continuing Operational Safety, at the address
identified in paragraph (r) of this AD or email to: <a href="/cdn-cgi/l/email-protection#bbfaf6f4f8fbdddada95dcd4cd"><span class="__cf_email__" data-cfemail="3d7c70727e7d5b5c5c135a524b">[email protected]</span></a>.
[[Page 88118]]
(2) Before using any approved AMOC, notify your appropriate
principal inspector, or lacking a principal inspector, the manager
of the responsible Flight Standards Office.
(3) AMOCs approved for AD 2023-13-11 are approved as AMOCs for
the corresponding provisions of this AD.
(r) Related Information
(1) For more information about this AD, contact Gabriel Kim,
Aviation Safety Engineer, FAA, 1600 Stewart Avenue, Suite 410,
Westbury, NY 11590; telephone 516-228-7300; email <a href="/cdn-cgi/l/email-protection#aa9387cbdcd987c4d3cbc9c587c9c5d9eacccbcb84cdc5dc"><span class="__cf_email__" data-cfemail="546d79352227793a2d35373b79373b27143235357a333b22">[email protected]</span></a>.
(2) Material identified in this AD that is not incorporated by
reference is available at the address specified in paragraph (s)(5)
of this AD.
(s) Material Incorporated by Reference
(1) The Director of the Federal Register approved the
incorporation by reference (IBR) of the material listed in this
paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.
(2) You must use this material as applicable to do the actions
required by this AD, unless this AD specifies otherwise.
(3) The following material was approved for IBR on November 26,
2024 (89 FR 84267, October 22, 2024).
(i) Safran Aerosystems Alert Service Bulletin 10015804-35-01,
Revision 04, dated November 9, 2023.
(ii) Safran Aerosystems Alert Service Bulletin 10015804-35-02,
Revision 06, dated August 30, 2023.
(iii) Safran Aerosystems Alert Service Bulletin 10015804-35-03,
Revision 05, dated September 29, 2023.
(4) The following material was approved for IBR on September 5,
2023 (88 FR 50011, August 1, 2023).
(i) AVOX Systems Inc. Alert Service Bulletin 10015804-35-01,
Revision 03, dated June 7, 2021.
(ii) AVOX Systems Inc. Alert Service Bulletin 10015804-35-02,
Revision 03, dated March 11, 2022.
(iii) AVOX Systems Inc. Alert Service Bulletin 10015804-35-03,
Revision 03, dated June 18, 2021.
(5) For material identified in this AD, contact AVOX Systems
Inc., 225 Erie Street, Lancaster, NY 14086; telephone 716-683-5100;
website <a href="http://safranaerosystems.com">safranaerosystems.com</a>.
(6) You may view this material at the FAA, Airworthiness
Products Section, Operational Safety Branch, 2200 South 216th St.,
Des Moines, WA. For information on the availability of this material
at the FAA, call 206-231-3195.
(7) You may view this material at the National Archives and
Records Administration (NARA). For information on the availability
of this material at NARA, visit <a href="/cdn-cgi/l/email-protection#18247938706a7d7e25" http: www.archives.gov federal-register cfr ibr-locationsoremailfr.inspection@nara.gov">www.archives.gov/federal-register/cfr/<span class="__cf_email__" data-cfemail="adc4cfdf80c1c2ceccd9c4c2c3dec2dfc8c0ccc4c1cbdf83c4c3deddc8ced9c4c2c3edc3ccdfcc83cac2db">[email protected]</span></a>"><a href="http://www.archives.gov/federal-register/cfr/ibr-locationsoremailfr.inspection@nara.gov">www.archives.gov/federal-register/cfr/<span class="__cf_email__" data-cfemail="3f565d4d1253505c5e4b5650514c504d5a525e5653594d1156514c4f5a5c4b5650517f515e4d5e11585049">[email protected]</span></a></a>.
Issued on October 30, 2024.
Victor Wicklund,
Deputy Director, Compliance & Airworthiness Division, Aircraft
Certification Service.
[FR Doc. 2024-25784 Filed 11-6-24; 8:45 am]
BILLING CODE 4910-13-P
</pre><script data-cfasync="false" src="/cdn-cgi/scripts/5c5dd728/cloudflare-static/email-decode.min.js"></script></body>
</html>Indexed from Federal Register on November 7, 2024.
This is legal information, not legal advice. Laws vary by jurisdiction and change frequently. Always verify current law with official sources and consult a licensed attorney in your jurisdiction for advice on your specific situation.