Airworthiness Directives; Safran Aerosystems (Formerly AVOX Systems Inc.; Scott Aviation) Oxygen Cylinder and Valve Assemblies, and Oxygen Valve Assemblies
Primary source
Metadata and text below are from the Federal Register, a public-domain U.S. government work. Always verify the official published version before relying on it for any legal matter.
Issuing agencies
Abstract
The FAA is superseding Airworthiness Directive (AD) 2023-13- 11, which applied to certain AVOX Systems Inc. (formerly Scott Aviation) oxygen cylinder and valve assemblies, and oxygen valve assemblies, installed on but not limited to various transport airplanes. AD 2023-13-11 required inspecting the oxygen valve assemblies, and oxygen cylinder and valve assemblies, to determine the serial number of the valve, cylinder, and entire assembly; inspecting certain assemblies and parts for correct spacing of the gap between the bottom of the packing retainer and top of the valve body on the assemblies, and replacing assemblies having unacceptable gaps. AD 2023- 13-11 also limited the installation of affected parts and required reporting inspection results and returning certain assemblies to the manufacturer. This AD was prompted by the determination that additional assemblies and parts are subject to the unsafe condition. This AD requires the actions specified in AD 2023-13-11 and expands the list of affected assemblies and parts. The FAA is issuing this AD to address the unsafe condition on these products.
This is legal information, not legal advice. Laws vary by jurisdiction and change frequently. Always verify current law with official sources and consult a licensed attorney in your jurisdiction for advice on your specific situation.