Rule2024-20113
Airworthiness Directives; Dassault Aviation Airplanes
Primary source
Metadata and text below are from the Federal Register, a public-domain U.S. government work. Always verify the official published version before relying on it for any legal matter.
Published
September 9, 2024
Effective
October 15, 2024
Issuing agencies
Transportation DepartmentFederal Aviation Administration
Abstract
The FAA is superseding Airworthiness Directive (AD) 2023-25- 07, which applied to all Dassault Aviation Model MYSTERE-FALCON 900 airplanes. AD 2023-25-07 required revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD continues to require certain actions in AD 2023- 25-07 and requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Full Text
<html>
<head>
<title>Federal Register, Volume 89 Issue 174 (Monday, September 9, 2024)</title>
</head>
<body><pre>
[Federal Register Volume 89, Number 174 (Monday, September 9, 2024)]
[Rules and Regulations]
[Pages 72974-72976]
From the Federal Register Online via the Government Publishing Office [<a href="http://www.gpo.gov">www.gpo.gov</a>]
[FR Doc No: 2024-20113]
[[Page 72974]]
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. FAA-2024-1300; Project Identifier MCAI-2024-00081-T;
Amendment 39-22793; AD 2024-15-02]
RIN 2120-AA64
Airworthiness Directives; Dassault Aviation Airplanes
AGENCY: Federal Aviation Administration (FAA), DOT.
ACTION: Final rule.
-----------------------------------------------------------------------
SUMMARY: The FAA is superseding Airworthiness Directive (AD) 2023-25-
07, which applied to all Dassault Aviation Model MYSTERE-FALCON 900
airplanes. AD 2023-25-07 required revising the existing maintenance or
inspection program, as applicable, to incorporate new or more
restrictive airworthiness limitations. This AD was prompted by a
determination that new or more restrictive airworthiness limitations
are necessary. This AD continues to require certain actions in AD 2023-
25-07 and requires revising the existing maintenance or inspection
program, as applicable, to incorporate new or more restrictive
airworthiness limitations, as specified in a European Union Aviation
Safety Agency (EASA) AD, which is incorporated by reference. The FAA is
issuing this AD to address the unsafe condition on these products.
DATES: This AD is effective October 15, 2024.
The Director of the Federal Register approved the incorporation by
reference of a certain publication listed in this AD as of October 15,
2024.
The Director of the Federal Register approved the incorporation by
reference of a certain other publication listed in this AD as of
February 7, 2024 (89 FR 244, January 3, 2024; corrected January 18,
2024 (89 FR 3342); corrected January 26, 2024 (89 FR 5088)).
ADDRESSES:
AD Docket: You may examine the AD docket at <a href="http://regulations.gov">regulations.gov</a> under
Docket No. FAA-2024-1300; or in person at Docket Operations between 9
a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD
docket contains this final rule, the mandatory continuing airworthiness
information (MCAI), any comments received, and other information. The
address for Docket Operations is U.S. Department of Transportation,
Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200
New Jersey Avenue SE, Washington, DC 20590.
Material Incorporated by Reference:
<bullet> For EASA material identified in this AD, contact EASA,
Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; telephone +49 221 8999
000; email <a href="/cdn-cgi/l/email-protection#d19095a291b4b0a2b0ffb4a4a3bea1b0ffb4a4"><span class="__cf_email__" data-cfemail="ca8b8eb98aafabb9abe4afbfb8a5baabe4afbf">[email protected]</span></a>; website easa.europa.eu. You may find
this material on the EASA website at ad.easa.europa.eu.
<bullet> You may view this material at the FAA, Airworthiness
Products Section, Operational Safety Branch, 2200 South 216th St., Des
Moines, WA. For information on the availability of this material at the
FAA, call 206-231-3195. It is also available at <a href="http://regulations.gov">regulations.gov</a> under
Docket No. FAA-2024-1300.
FOR FURTHER INFORMATION CONTACT: Tom Rodriguez, Aviation Safety
Engineer, FAA, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590;
telephone: 206-231-3226; email <a href="/cdn-cgi/l/email-protection#8efae1e3a0fce1eafce7e9fbebf4cee8efefa0e9e1f8"><span class="__cf_email__" data-cfemail="a2d6cdcf8cd0cdc6d0cbc5d7c7d8e2c4c3c38cc5cdd4">[email protected]</span></a>.
SUPPLEMENTARY INFORMATION:
Background
The FAA issued a notice of proposed rulemaking (NPRM) to amend 14
CFR part 39 to supersede AD 2023-25-07, Amendment 39-22634 (89 FR 244,
January 3, 2024; corrected January 18, 2024 (89 FR 3342); corrected
January 26, 2024 (89 FR 5088)) (AD 2023-25-07). AD 2023-25-07 applied
to all Dassault Aviation Model MYSTERE-FALCON 900 airplanes. AD 2023-
25-07 required revising the existing maintenance or inspection program,
as applicable, to incorporate new or more restrictive airworthiness
limitations. The FAA issued AD 2023-25-07 to address reduced structural
integrity of the airplane.
The NPRM published in the Federal Register on May 17, 2024 (89 FR
43339). The NPRM was prompted by AD 2024-0036, dated January 31, 2024,
issued by EASA, which is the Technical Agent for the Member States of
the European Union (EASA AD 2024-0036) (also referred to as the MCAI).
The MCAI states that new or more restrictive airworthiness limitations
have been developed.
In the NPRM, the FAA proposed to continue to require certain
actions in AD 2023-25-07 and to require revising the existing
maintenance or inspection program, as applicable, to incorporate new or
more restrictive airworthiness limitations, as specified in EASA AD
2024-0036. The FAA is issuing this AD to address reduced structural
integrity of the airplane.
You may examine the MCAI in the AD docket at <a href="http://regulations.gov">regulations.gov</a> under
Docket No. FAA-2024-1300.
Discussion of Final Airworthiness Directive
Comments
The FAA received comments from one individual who supported the
NPRM without change.
Conclusion
This product has been approved by the aviation authority of another
country and is approved for operation in the United States. Pursuant to
the FAA's bilateral agreement with this State of Design Authority, it
has notified the FAA of the unsafe condition described in the MCAI
referenced above. The FAA reviewed the relevant data, considered the
comment received, and determined that air safety requires adopting this
AD as proposed. Accordingly, the FAA is issuing this AD to address the
unsafe condition on this product. Except for minor editorial changes,
this AD is adopted as proposed in the NPRM. None of the changes will
increase the economic burden on any operator.
Material Incorporated by Reference Under 1 CFR Part 51
EASA AD 2024-0036 specifies new or more restrictive airworthiness
limitations for airplane structures and safe life limits.
This AD also requires EASA AD 2023-0046, dated March 2, 2023, which
the Director of the Federal Register approved for incorporation by
reference as of February 7, 2024 (89 FR 244, January 3, 2024; corrected
January 18, 2024 (89 FR 3342); corrected January 26, 2024 (89 FR
5088)).
This material is reasonably available because the interested
parties have access to it through their normal course of business or by
the means identified in the ADDRESSES section.
Costs of Compliance
The FAA estimates that this AD affects 151 airplanes of U.S.
registry. The FAA estimates the following costs to comply with this AD:
The FAA estimates the total cost per operator for the retained
actions from AD 2023-25-07 to be $7,650 (90 work-hours x $85 per work-
hour).
The FAA has determined that revising the existing maintenance or
inspection program takes an average of 90 work-hours per operator,
although the agency recognizes that this number may vary from operator
to operator. Since operators incorporate maintenance or inspection
program changes for their affected fleet(s), the FAA has determined
that a per-operator estimate is more accurate than a per-airplane
estimate.
[[Page 72975]]
The FAA estimates the total cost per operator for the new actions
to be $7,650 (90 work-hours x $85 per work-hour).
Authority for This Rulemaking
Title 49 of the United States Code specifies the FAA's authority to
issue rules on aviation safety. Subtitle I, section 106, describes the
authority of the FAA Administrator. Subtitle VII: Aviation Programs,
describes in more detail the scope of the Agency's authority.
The FAA is issuing this rulemaking under the authority described in
Subtitle VII, Part A, Subpart III, Section 44701: General requirements.
Under that section, Congress charges the FAA with promoting safe flight
of civil aircraft in air commerce by prescribing regulations for
practices, methods, and procedures the Administrator finds necessary
for safety in air commerce. This regulation is within the scope of that
authority because it addresses an unsafe condition that is likely to
exist or develop on products identified in this rulemaking action.
Regulatory Findings
This AD will not have federalism implications under Executive Order
13132. This AD will not have a substantial direct effect on the States,
on the relationship between the national government and the States, or
on the distribution of power and responsibilities among the various
levels of government.
For the reasons discussed above, I certify that this AD:
(1) Is not a ``significant regulatory action'' under Executive
Order 12866,
(2) Will not affect intrastate aviation in Alaska, and
(3) Will not have a significant economic impact, positive or
negative, on a substantial number of small entities under the criteria
of the Regulatory Flexibility Act.
List of Subjects in 14 CFR Part 39
Air transportation, Aircraft, Aviation safety, Incorporation by
reference, Safety.
The Amendment
Accordingly, under the authority delegated to me by the
Administrator, the FAA amends 14 CFR part 39 as follows:
PART 39--AIRWORTHINESS DIRECTIVES
0
1. The authority citation for part 39 continues to read as follows:
Authority: 49 U.S.C. 106(g), 40113, 44701.
Sec. 39.13 [Amended]
0
2. The FAA amends Sec. 39.13 by:
0
a. Removing Airworthiness Directive (AD) 2023-25-07, Amendment 39-22634
(89 FR 244, January 3, 2024; corrected January 18, 2024 (89 FR 3342);
corrected January 26, 2024 (89 FR 5088)); and
0
b. Adding the following new AD:
2024-15-02 Dassault Aviation: Amendment 39-22793; Docket No. FAA-
2024-1300; Project Identifier MCAI-2024-00081-T.
(a) Effective Date
This airworthiness directive (AD) is effective October 15, 2024.
(b) Affected ADs
This AD replaces AD 2023-25-07, Amendment 39-22634 (89 FR 244,
January 3, 2024; corrected January 18, 2024 (89 FR 3342); corrected
January 26, 2024 (89 FR 5088)) (AD 2023-25-07).
(c) Applicability
This AD applies to all Dassault Aviation Model MYSTERE-FALCON
900 airplanes, certificated in any category.
(d) Subject
Air Transport Association (ATA) of America Code 05, Time Limits/
Maintenance Checks.
(e) Unsafe Condition
This AD was prompted by a determination that new or more
restrictive airworthiness limitations are necessary. The FAA is
issuing this AD to address reduced structural integrity of the
airplane.
(f) Compliance
Comply with this AD within the compliance times specified,
unless already done.
(g) Retained Revision of the Existing Maintenance or Inspection
Program, With a New Exception
This paragraph restates the requirements of paragraph (j) of AD
2023-25-07, with a new exception. Except as specified in paragraph
(h) of this AD: Comply with all required actions and compliance
times specified in, and in accordance with, European Union Aviation
Safety Agency (EASA) AD 2023-0046, dated March 2, 2023 (EASA AD
2023-0046). Accomplishing the revision of the existing maintenance
or inspection program required by paragraph (j) of this AD
terminates the requirements of this paragraph.
(h) Retained Exceptions to EASA AD 2023-0046, With No Changes
This paragraph restates the exceptions specified in paragraph
(k) of AD 2023-25-07, with no changes.
(1) This AD does not adopt the requirements specified in
paragraphs (1) and (2) of EASA AD 2023-0046.
(2) Paragraph (3) of EASA AD 2023-0046 specifies revising ``the
approved AMP'' within 12 months after its effective date, but this
AD requires revising the existing maintenance or inspection program,
as applicable, within 90 days after February 7, 2024 (the effective
date of AD 2023-25-07).
(3) The initial compliance time for doing the tasks specified in
paragraph (3) of EASA AD 2023-0046 is at the applicable
``limitations'' and ``associated thresholds'' as incorporated by the
requirements of paragraph (3) of EASA AD 2023-0046, or within 90
days after February 7, 2024 (the effective date of AD 2023-25-07),
whichever occurs later.
(4) This AD does not adopt the provisions specified in
paragraphs (4) and (5) of EASA AD 2023-0046.
(5) This AD does not adopt the ``Remarks'' section of EASA AD
2023-0046.
(i) Retained Restrictions on Alternative Actions or Intervals, With a
New Exception
This paragraph restates the requirements of paragraph (l) of AD
2023-25-07, with a new exception. Except as required by paragraph
(j) of this AD, after the maintenance or inspection program has been
revised as required by paragraph (g) of this AD, no alternative
actions (e.g., inspections) or intervals are allowed unless they are
approved as specified in the provisions of the ``Ref. Publications''
section of EASA AD 2023-0046.
(j) New Revision of the Existing Maintenance or Inspection Program
Except as specified in paragraph (k) of this AD: Comply with all
required actions and compliance times specified in, and in
accordance with, EASA AD 2024-0036, dated January 31, 2024 (EASA AD
2024-0036). Accomplishing the revision of the existing maintenance
or inspection program required by this paragraph terminates the
requirements of paragraph (g) of this AD.
(k) Exceptions to EASA AD 2024-0036
(1) This AD does not adopt the requirements specified in
paragraphs (1) and (2) of EASA AD 2024-0036.
(2) Paragraph (3) of EASA AD 2024-0036 specifies revising ``the
approved AMP'' within 12 months after its effective date, but this
AD requires revising the existing maintenance or inspection program,
as applicable, within 90 days after the effective date of this AD.
(3) The initial compliance time for doing the tasks specified in
paragraph (3) of EASA AD 2024-0036 is at the applicable
``limitations'' and ``associated thresholds'' as incorporated by the
requirements of paragraph (3) of EASA AD 2024-0036, or within 90
days after the effective date of this AD, whichever occurs later.
(4) This AD does not adopt the provisions specified in
paragraphs (4) and (5) of EASA AD 2024-0036.
(5) This AD does not adopt the ``Remarks'' section of EASA AD
2024-0036.
(l) New Provisions for Alternative Actions and Intervals
After the existing maintenance or inspection program has been
revised as required by paragraph (j) of this AD, no alternative
actions (e.g., inspections) or intervals are allowed unless they are
[[Page 72976]]
approved as specified in the provisions of the ``Ref. Publications''
section of EASA AD 2024-0036.
(m) Additional AD Provisions
The following provisions also apply to this AD:
(1) Alternative Methods of Compliance (AMOCs): The Manager,
International Validation Branch, FAA, has the authority to approve
AMOCs for this AD, if requested using the procedures found in 14 CFR
39.19. In accordance with 14 CFR 39.19, send your request to your
principal inspector or responsible Flight Standards Office, as
appropriate. If sending information directly to the manager of the
International Validation Branch, mail it to the address identified
in paragraph (n) of this AD. Information may be emailed to: <a href="/cdn-cgi/l/email-protection#d6effb978085fb979f84fbe1e5e6fb979b999596b0b7b7f8b1b9a0"><span class="__cf_email__" data-cfemail="fcc5d1bdaaafd1bdb5aed1cbcfccd1bdb1b3bfbc9a9d9dd29b938a">[email protected]</span></a>. Before using any approved AMOC, notify your
appropriate principal inspector, or lacking a principal inspector,
the manager of the responsible Flight Standards Office.
(2) Contacting the Manufacturer: For any requirement in this AD
to obtain instructions from a manufacturer, the instructions must be
accomplished using a method approved by the Manager, International
Validation Branch, FAA; or EASA; or Dassault Aviation's EASA Design
Organization Approval (DOA). If approved by the DOA, the approval
must include the DOA-authorized signature.
(n) Additional Information
For more information about this AD, contact Tom Rodriguez,
Aviation Safety Engineer, FAA, 1600 Stewart Avenue, Suite 410,
Westbury, NY 11590; telephone: 206-231-3226; email
<a href="/cdn-cgi/l/email-protection#e0948f8dce928f8492898795859aa0868181ce878f96"><span class="__cf_email__" data-cfemail="1f6b7072316d707b6d76786a7a655f797e7e31787069">[email protected]</span></a>.
(o) Material Incorporated by Reference
(1) The Director of the Federal Register approved the
incorporation by reference (IBR) of the material listed in this
paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.
(2) You must use this material as applicable to do the actions
required by this AD, unless this AD specifies otherwise.
(3) The following material was approved for IBR on October 15,
2024.
(i) European Union Aviation Safety Agency (EASA) AD 2024-0036,
dated January 31, 2024.
(ii) [Reserved]
(4) The following material was approved for IBR on February 7,
2024 (89 FR 244, January 3, 2024; corrected January 18, 2024 (89 FR
3342); corrected January 26, 2024 (89 FR 5088)).
(i) EASA AD 2023-0046, dated March 2, 2023.
(ii) [Reserved]
(5) For EASA ADs 2023-0046 and 2024-0036, contact EASA, Konrad-
Adenauer-Ufer 3, 50668 Cologne, Germany; telephone +49 221 8999 000;
email <a href="/cdn-cgi/l/email-protection#6c2d281f2c090d1f0d4209191e031c0d420919"><span class="__cf_email__" data-cfemail="8acbcef9caefebf9eba4effff8e5faeba4efff">[email protected]</span></a>; website easa.europa.eu. You may find these
EASA ADs on the EASA website at ad.easa.europa.eu.
(6) You may view this material at the FAA, Airworthiness
Products Section, Operational Safety Branch, 2200 South 216th St.,
Des Moines, WA. For information on the availability of this material
at the FAA, call 206-231-3195.
(7) You may view this material at the National Archives and
Records Administration (NARA). For information on the availability
of this material at NARA, visit <a href="/cdn-cgi/l/email-protection#300c5110584255560d" http: www.archives.gov federal-register cfr ibr-locationsoremailfr.inspection@nara.gov">www.archives.gov/federal-register/cfr/<span class="__cf_email__" data-cfemail="c1a8a3b3ecadaea2a0b5a8aeafb2aeb3a4aca0a8ada7b3efa8afb2b1a4a2b5a8aeaf81afa0b3a0efa6aeb7">[email protected]</span></a>"><a href="http://www.archives.gov/federal-register/cfr/ibr-locationsoremailfr.inspection@nara.gov">www.archives.gov/federal-register/cfr/<span class="__cf_email__" data-cfemail="8de4efffa0e1e2eeecf9e4e2e3fee2ffe8e0ece4e1ebffa3e4e3fefde8eef9e4e2e3cde3ecffeca3eae2fb">[email protected]</span></a></a>.
Issued on July 16, 2024.
James D. Foltz,
Deputy Director, Compliance & Airworthiness Division, Aircraft
Certification Service.
[FR Doc. 2024-20113 Filed 9-6-24; 8:45 am]
BILLING CODE 4910-13-P
</pre><script data-cfasync="false" src="/cdn-cgi/scripts/5c5dd728/cloudflare-static/email-decode.min.js"></script></body>
</html>Indexed from Federal Register on September 9, 2024.
This is legal information, not legal advice. Laws vary by jurisdiction and change frequently. Always verify current law with official sources and consult a licensed attorney in your jurisdiction for advice on your specific situation.