Airworthiness Directives; The Boeing Company Airplanes
Primary source
Metadata and text below are from the Federal Register, a public-domain U.S. government work. Always verify the official published version before relying on it for any legal matter.
Issuing agencies
Abstract
The FAA proposes to adopt a new airworthiness directive (AD) for all The Boeing Company Model 787-8, 787-9, and 787-10 airplanes. This proposed AD was prompted by a report that during manufacture of drag brace lower lock link assemblies for the main landing gear (MLG), a certain required inspection was not performed. This proposed AD would require doing a check of maintenance records or an inspection to determine if certain drag brace lower lock link assemblies are installed, and applicable on-condition actions. This proposed AD would also prohibit the installation of affected parts. The FAA is proposing this AD to address the unsafe condition on these products.
This is legal information, not legal advice. Laws vary by jurisdiction and change frequently. Always verify current law with official sources and consult a licensed attorney in your jurisdiction for advice on your specific situation.