Airworthiness Directives; Bombardier, Inc., Airplanes
Primary source
Metadata and text below are from the Federal Register, a public-domain U.S. government work. Always verify the official published version before relying on it for any legal matter.
Issuing agencies
Abstract
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model CL-600-2B16 (604 Variant) airplanes. This AD was prompted by a report of sparking due to damaged wire insulation in the fueling adapter. This AD requires inspecting the electrical wires attached to the airplane connector located behind the fuel scupper for damage, and all applicable related investigative and corrective actions. The FAA is issuing this AD to address the unsafe condition on these products.
Full Text
<html>
<head>
<title>Federal Register, Volume 89 Issue 134 (Friday, July 12, 2024)</title>
</head>
<body><pre>
[Federal Register Volume 89, Number 134 (Friday, July 12, 2024)]
[Rules and Regulations]
[Pages 57073-57075]
From the Federal Register Online via the Government Publishing Office [<a href="http://www.gpo.gov">www.gpo.gov</a>]
[FR Doc No: 2024-15306]
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. FAA-2024-0467; Project Identifier MCAI-2023-00892-T;
Amendment 39-22775; AD 2024-13-01]
RIN 2120-AA64
Airworthiness Directives; Bombardier, Inc., Airplanes
AGENCY: Federal Aviation Administration (FAA), DOT.
ACTION: Final rule.
-----------------------------------------------------------------------
SUMMARY: The FAA is adopting a new airworthiness directive (AD) for
certain Bombardier, Inc., Model CL-600-2B16 (604 Variant) airplanes.
This AD was prompted by a report of sparking due to damaged wire
insulation in the fueling adapter. This AD requires inspecting the
electrical wires attached to the airplane connector located behind the
fuel scupper for damage, and all applicable related investigative and
corrective actions. The FAA is issuing this AD to address the unsafe
condition on these products.
DATES: This AD is effective August 16, 2024.
The Director of the Federal Register approved the incorporation by
reference of certain publications listed in this AD as of August 16,
2024.
ADDRESSES:
AD Docket: You may examine the AD docket at <a href="http://regulations.gov">regulations.gov</a> under
Docket No. FAA-2024-0467; or in person at Docket Operations between 9
a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD
docket contains this final rule, the mandatory continuing airworthiness
information (MCAI), any comments received, and other information. The
address for Docket Operations is U.S. Department of Transportation,
Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200
New Jersey Avenue SE, Washington, DC 20590.
Material Incorporated by Reference:
<bullet> For service information, contact Bombardier Business
Aircraft Customer Response Center, 400 C[ocirc]te-Vertu Road West,
Dorval, Qu[eacute]bec H4S 1Y9, Canada; phone 514-855-2999; email
<a href="/cdn-cgi/l/email-protection#ec8d8fc2959980ac8d899e83c2d08dcc849e898ad1" http: bombardier.com">bombardier.com</a>">ac.yul@aero.<a href="http://bombardier.com">bombardier.com</a></a>; website <a href="http://bombardier.com">bombardier.com</a>.
<bullet> You may view this service information at the FAA,
Airworthiness Products Section, Operational Safety Branch, 2200 South
216th St., Des Moines, WA. For information on the availability of this
material at the FAA, call 206-231-3195. It is also available at
<a href="http://regulations.gov">regulations.gov</a> under Docket No. FAA-2024-0467.
FOR FURTHER INFORMATION CONTACT: Steven Dzierzynski, Aviation Safety
Engineer, FAA, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590;
phone: 516-228-7300; email: <a href="/cdn-cgi/l/email-protection#8bb2a6eafdf8a6e5f2eae8e4a6e8e4f8cbedeaeaa5ece4fd"><span class="__cf_email__" data-cfemail="dee7f3bfa8adf3b0a7bfbdb1f3bdb1ad9eb8bfbff0b9b1a8">[email protected]</span></a>.
SUPPLEMENTARY INFORMATION:
Background
The FAA issued a notice of proposed rulemaking (NPRM) to amend 14
CFR part 39 by adding an AD that would apply to certain Bombardier,
Inc., Model CL-600-2B16 (604 Variant) airplanes. The NPRM published in
the Federal Register on March 21, 2024 (89 FR 20141). The NPRM was
prompted by AD CF-2023-55, dated July 18, 2023, issued by Transport
Canada, which is the aviation authority for Canada (referred to after
this as the MCAI). The MCAI states that during airplane refueling, a
spark was seen when the fuel cap chain contacted one of the fuel
scupper bolts. An inspection was performed and one of the fourteen
bolts that surround the fuel inlet was found touching an electrical
wire behind the scupper. Due to vibrations during flight, the bolt
damaged the wire insulation and when the bolt was grounded to the
airframe a spark was generated.
In the NPRM, the FAA proposed to require inspecting the electrical
wires attached to the airplane connector located behind the fuel
scupper for damage, and all applicable related investigative and
corrective actions. The FAA is issuing this AD to address
[[Page 57074]]
damaged wire insulation, which could lead to electrical sparks during
refueling and possibly result in a fire.
You may examine the MCAI in the AD docket at <a href="http://regulations.gov">regulations.gov</a> under
Docket No. FAA-2024-0467.
Discussion of Final Airworthiness Directive
Comments
The FAA received no comments on the NPRM or on the determination of
the cost to the public.
Conclusion
This product has been approved by the aviation authority of another
country and is approved for operation in the United States. Pursuant to
the FAA's bilateral agreement with this State of Design Authority, it
has notified the FAA of the unsafe condition described in the MCAI
referenced above. The FAA reviewed the relevant data and determined
that air safety requires adopting this AD as proposed. Accordingly, the
FAA is issuing this AD to address the unsafe condition on this product.
Except for minor editorial changes, this AD is adopted as proposed in
the NPRM. None of the changes will increase the economic burden on any
operator.
Related Service Information Under 1 CFR Part 51
The FAA reviewed Bombardier Service Bulletin 605-28-014, dated May
10, 2023; and Bombardier Service Bulletin 650-28-003, dated May 10,
2023. This service information specifies procedures for inspecting the
electrical wires attached to the J274 connector (i.e., the airplane
connector located behind the fuel scupper) for damage (i.e., core of
the electrical wire exposed, or damage such as black soot to the
insulation with no core exposure), and applicable related investigative
and corrective actions. The related investigative action includes
inspecting the fuel scupper for damage (i.e., arcing or pitting marks
directly or indirectly induced by the wire chaffed on the scupper bolt
and the surrounding area). The corrective actions include repairing any
damaged fuel scupper, repairing or replacing any damaged electrical
wire, and reinstalling the fuel scupper without a certain attachment
bolt. These documents are distinct since they apply to different
configurations of the airplane.
This service information is reasonably available because the
interested parties have access to it through their normal course of
business or by the means identified in the ADDRESSES section.
Costs of Compliance
The FAA estimates that this AD affects 163 airplanes of U.S.
registry.
The FAA estimates the following costs to comply with this AD:
Estimated Costs for Required Actions
----------------------------------------------------------------------------------------------------------------
Cost per Cost on U.S.
Labor cost Parts cost product operators
----------------------------------------------------------------------------------------------------------------
3 work-hours x $85 per hour = $255........................... $0 $255 $41,565
----------------------------------------------------------------------------------------------------------------
The FAA estimates the following costs to do any necessary on-
condition actions that would be required based on the results of any
required actions. The FAA has no way of determining the number of
aircraft that might need these on-condition actions:
Estimated Costs of On-Condition Actions
----------------------------------------------------------------------------------------------------------------
Labor cost Parts cost Cost per product
----------------------------------------------------------------------------------------------------------------
4 work-hours x $85 per hour = $340 *...................................... ** $0 $340
----------------------------------------------------------------------------------------------------------------
* The FAA has received no definitive data on which to base the cost estimates for the on-condition scupper
repair specified in this AD.
** The FAA has received no definitive data on which to base the parts cost for the electrical wire replacement
specified in this AD.
Authority for This Rulemaking
Title 49 of the United States Code specifies the FAA's authority to
issue rules on aviation safety. Subtitle I, section 106, describes the
authority of the FAA Administrator. Subtitle VII: Aviation Programs,
describes in more detail the scope of the Agency's authority.
The FAA is issuing this rulemaking under the authority described in
Subtitle VII, Part A, Subpart III, Section 44701: General requirements.
Under that section, Congress charges the FAA with promoting safe flight
of civil aircraft in air commerce by prescribing regulations for
practices, methods, and procedures the Administrator finds necessary
for safety in air commerce. This regulation is within the scope of that
authority because it addresses an unsafe condition that is likely to
exist or develop on products identified in this rulemaking action.
Regulatory Findings
This AD will not have federalism implications under Executive Order
13132. This AD will not have a substantial direct effect on the States,
on the relationship between the national government and the States, or
on the distribution of power and responsibilities among the various
levels of government.
For the reasons discussed above, I certify that this AD:
(1) Is not a ``significant regulatory action'' under Executive
Order 12866,
(2) Will not affect intrastate aviation in Alaska, and
(3) Will not have a significant economic impact, positive or
negative, on a substantial number of small entities under the criteria
of the Regulatory Flexibility Act.
List of Subjects in 14 CFR Part 39
Air transportation, Aircraft, Aviation safety, Incorporation by
reference, Safety.
The Amendment
Accordingly, under the authority delegated to me by the
Administrator, the FAA amends 14 CFR part 39 as follows:
PART 39--AIRWORTHINESS DIRECTIVES
0
1. The authority citation for part 39 continues to read as follows:
Authority: 49 U.S.C. 106(g), 40113, 44701.
[[Page 57075]]
Sec. 39.13 [Amended]
0
2. The FAA amends Sec. 39.13 by adding the following new airworthiness
directive:
2024-13-01 Bombardier, Inc.: Amendment 39-22775; Docket No. FAA-
2024-0467; Project Identifier MCAI-2023-00892-T.
(a) Effective Date
This airworthiness directive (AD) is effective August 16, 2024.
(b) Affected ADs
None.
(c) Applicability
This AD applies to Bombardier, Inc., Model CL-600-2B16 (604
Variant) airplanes, certificated in any category, serial numbers
5775 through 5990 inclusive and 6050 through 6178 inclusive.
(d) Subject
Air Transport Association (ATA) of America Code 28, Fuel.
(e) Unsafe Condition
This AD was prompted by a report of sparking due to damaged wire
insulation in the fueling adapter. The FAA is issuing this AD to
address damaged wire insulation. The unsafe condition, if not
addressed, could lead to electrical sparks during refueling and
possibly result in a fire.
(f) Compliance
Comply with this AD within the compliance times specified,
unless already done.
(g) Inspections
Within 48 months after the effective date of this AD: Inspect
the electrical wires attached to the J274 connector for damage, in
accordance with Section 2.B of the Accomplishment Instructions of
the applicable Bombardier service bulletin referenced in figure 1 to
paragraph (g) of this AD.
Figure 1 to Paragraph (g)--Applicable Service Bulletins
------------------------------------------------------------------------
Model Serial No. Service bulletin
------------------------------------------------------------------------
CL-600-2B16................. 5775 through Bombardier Service
5990 inclusive. Bulletin 605-28-014,
dated May 10, 2023.
CL-600-2B16................. 6050 through Bombardier Service
6178 inclusive. Bulletin 650-28-003,
dated May 10, 2023.
------------------------------------------------------------------------
(h) Related Investigative and Corrective Actions
Before further flight after accomplishing paragraph (g) of this
AD, do the applicable actions specified in paragraph (h)(1) or (2)
of this AD.
(1) If no electrical wire is damaged, do the related
investigative and corrective actions specified in and in accordance
with Section 2.C of the Accomplishment Instructions of the
applicable Bombardier service bulletin referenced in figure 1 to
paragraph (g) of this AD.
(2) If any electrical wire is damaged, do the related
investigative and corrective actions specified in and in accordance
with Section 2.D of the Accomplishment Instructions of the
applicable Bombardier service bulletin referenced in figure 1 to
paragraph (g) of this AD.
(i) Additional AD Provisions
The following provisions also apply to this AD:
(1) Alternative Methods of Compliance (AMOCs): The Manager,
International Validation Branch, FAA, has the authority to approve
AMOCs for this AD, if requested using the procedures found in 14 CFR
39.19. In accordance with 14 CFR 39.19, send your request to your
principal inspector or responsible Flight Standards Office, as
appropriate. If sending information directly to the manager of the
International Validation Branch, mail it to the address identified
in paragraph (j) of this AD. Information may be emailed to: 9-AVS-
<a href="/cdn-cgi/l/email-protection" class="__cf_email__" data-cfemail="125c4b53515d3f515d41527473733c757d64">[email protected]</a>. Before using any approved AMOC, notify your
appropriate principal inspector, or lacking a principal inspector,
the manager of the responsible Flight Standards Office.
(2) Contacting the Manufacturer: For any requirement in this AD
to obtain instructions from a manufacturer, the instructions must be
accomplished using a method approved by the Manager, International
Validation Branch, FAA; or Transport Canada; or Bombardier, Inc.'s
Transport Canada Design Approval Organization (DAO). If approved by
the DAO, the approval must include the DAO-authorized signature.
(j) Additional Information
For more information about this AD, contact Steven Dzierzynski,
Aviation Safety Engineer, FAA, 1600 Stewart Avenue, Suite 410,
Westbury, NY 11590; phone: 516-228-7300; email: <a href="/cdn-cgi/l/email-protection#566f7b3720257b382f3735397b3539251630373778313920"><span class="__cf_email__" data-cfemail="e5dcc8849396c88b9c84868ac8868a96a5838484cb828a93">[email protected]</span></a>.
(k) Material Incorporated by Reference
(1) The Director of the Federal Register approved the
incorporation by reference of the service information listed in this
paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.
(2) You must use this service information as applicable to do
the actions required by this AD, unless this AD specifies otherwise.
(i) Bombardier Service Bulletin 605-28-014, dated May 10, 2023.
(ii) Bombardier Service Bulletin 650-28-003, dated May 10, 2023.
(3) For service information, contact Bombardier Business
Aircraft Customer Response Center, 400 C[ocirc]te-Vertu Road West,
Dorval, Qu[eacute]bec H4S 1Y9, Canada; phone 514-855-2999; email
<a href="/cdn-cgi/l/email-protection#69080a47101c0529080c1b0647550849011b0c0f54" http: bombardier.com">bombardier.com</a>">ac.yul@aero.<a href="http://bombardier.com">bombardier.com</a></a>; website <a href="http://bombardier.com">bombardier.com</a>.
(4) You may view this material at the FAA, Airworthiness
Products Section, Operational Safety Branch, 2200 South 216th St.,
Des Moines, WA. For information on the availability of this material
at the FAA, call 206-231-3195.
(5) You may view this material at the National Archives and
Records Administration (NARA). For information on the availability
of this material at NARA, visit <a href="/cdn-cgi/l/email-protection#330f52135b4156550e" http: www.archives.gov federal-register cfr ibr-locationsoremailfr.inspection@nara.gov">www.archives.gov/federal-register/cfr/<span class="__cf_email__" data-cfemail="016863732c6d6e626075686e6f726e73646c60686d67732f686f7271646275686e6f416f6073602f666e77">[email protected]</span></a>"><a href="http://www.archives.gov/federal-register/cfr/ibr-locationsoremailfr.inspection@nara.gov">www.archives.gov/federal-register/cfr/<span class="__cf_email__" data-cfemail="6e070c1c4302010d0f1a0701001d011c0b030f0702081c4007001d1e0b0d1a0701002e000f1c0f40090118">[email protected]</span></a></a>.
Issued on June 18, 2024.
James D. Foltz,
Deputy Director, Compliance & Airworthiness Division, Aircraft
Certification Service.
[FR Doc. 2024-15306 Filed 7-11-24; 8:45 am]
BILLING CODE 4910-13-P
</pre><script data-cfasync="false" src="/cdn-cgi/scripts/5c5dd728/cloudflare-static/email-decode.min.js"></script></body>
</html>This is legal information, not legal advice. Laws vary by jurisdiction and change frequently. Always verify current law with official sources and consult a licensed attorney in your jurisdiction for advice on your specific situation.