Skip to main content
Proposed Rule2024-06216

Airworthiness Directives; International Aero Engines, LLC

Primary source

Metadata and text below are from the Federal Register, a public-domain U.S. government work. Always verify the official published version before relying on it for any legal matter.

Published
March 25, 2024

Issuing agencies

Transportation DepartmentFederal Aviation Administration

Abstract

The FAA proposes to adopt a new airworthiness directive (AD) for all International Aero Engines, LLC (IAE LLC) Model PW1122G-JM, PW1124G1-JM, PW1124G-JM, PW1127G1-JM, PW1127G1A-JM, PW1127G1B-JM, PW1127G-JM, PW1127GA-JM, PW1129G-JM, PW1130G-JM, PW1133G-JM, and PW1133GA-JM engines. This proposed AD was prompted by an in-flight shutdown (IFSD) caused by the fracture of a low-pressure compressor (LPC) 1st-stage integrally bladed rotor (IBR-1). This proposed AD would require removal and replacement of affected LPC key washers and affected LPC IBR-1 and installation of inlet guide vane (IGV) spacers. The FAA is proposing this AD to address the unsafe condition on these products.

Indexed from Federal Register on March 25, 2024.

This is legal information, not legal advice. Laws vary by jurisdiction and change frequently. Always verify current law with official sources and consult a licensed attorney in your jurisdiction for advice on your specific situation.