Notice2024-05181
Request for Information on the Use of Manufactured Products in Highway Projects
Primary source
Metadata and text below are from the Federal Register, a public-domain U.S. government work. Always verify the official published version before relying on it for any legal matter.
Published
March 12, 2024
Issuing agencies
Transportation DepartmentFederal Highway Administration
Abstract
On March 17, 2023, FHWA published a request for comments on its existing general applicability waiver for manufactured products under its Buy America waiver authorities. Following the review and consideration of comments, FHWA is proposing to discontinue the waiver. The FHWA is also proposing standards for applying Buy America requirements to manufactured products should the waiver be discontinued. To ensure the continued effective implementation of FHWA programs that would be subject to new requirements for manufactured products, FHWA is seeking additional information on the domestic availability of specific manufactured products commonly used in FHWA- funded projects. To ensure the Agency has the most comprehensive and current information available on the domestic market for manufactured products used in FHWA infrastructure projects, FHWA is especially interested in comments detailing domestic materials sourcing, market readiness, timeliness of product supply, and other considerations.
Full Text
<html>
<head>
<title>Federal Register, Volume 89 Issue 49 (Tuesday, March 12, 2024)</title>
</head>
<body><pre>
[Federal Register Volume 89, Number 49 (Tuesday, March 12, 2024)]
[Notices]
[Pages 17892-17895]
From the Federal Register Online via the Government Publishing Office [<a href="http://www.gpo.gov">www.gpo.gov</a>]
[FR Doc No: 2024-05181]
=======================================================================
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
Federal Highway Administration
[Docket No. FHWA-2023-0040]
Request for Information on the Use of Manufactured Products in
Highway Projects
AGENCY: Federal Highway Administration (FHWA), Department of
Transportation (DOT).
ACTION: Notice; request for information (RFI).
-----------------------------------------------------------------------
SUMMARY: On March 17, 2023, FHWA published a request for comments on
its existing general applicability waiver for manufactured products
under its Buy America waiver authorities. Following the review and
consideration of comments, FHWA is proposing to discontinue the waiver.
The FHWA is also proposing standards for applying Buy America
requirements to manufactured products should the waiver be
discontinued. To ensure the continued effective implementation of FHWA
programs that would be subject to new requirements for manufactured
products, FHWA is seeking additional information on the domestic
availability of specific manufactured products commonly used in FHWA-
funded projects. To ensure the Agency has the most comprehensive and
current information available on the domestic market for manufactured
products used in FHWA infrastructure projects, FHWA is especially
interested in comments detailing domestic materials sourcing, market
readiness, timeliness of product supply, and other considerations.
DATES: Comments must be received on or before May 13, 2024. Late-filed
comments will be considered to the extent practicable.
ADDRESSES: To ensure that you do not duplicate your docket submissions,
please submit comments by only one of the following means:
<bullet> Federal eRulemaking Portal: Go to <a href="http://www.regulations.gov">www.regulations.gov</a> and
follow the online instructions for submitting comments.
<bullet> Mail: Docket Management Facility, U.S. Department of
Transportation, 1200 New Jersey Avenue SE, West Building Ground Floor,
Room W12-140, Washington, DC 20590;
<bullet> Hand Delivery: West Building Ground Floor, Room W12-140,
1200 New Jersey Avenue SE, Washington, DC 20590, between 9 a.m. and 5
p.m. E.T., Monday through Friday, except Federal holidays. The
telephone number is (202) 366-9329;
<bullet> Instructions: You must include the agency name and docket
number at the beginning of your comments. Except as described below
under the heading ``Confidential Business Information,'' all
submissions received, including any personal information provided, will
be posted without change or alteration to <a href="http://www.regulations.gov">www.regulations.gov</a>. For more
information, you may review the U.S. Department of Transportation's
complete Privacy Act Statement published in the Federal Register on
April 11, 2000 (65 FR 19477).
FOR FURTHER INFORMATION CONTACT: For questions about this notice,
please contact Mr. Brian Hogge, FHWA Office of Infrastructure, (202)
366-1562, or via email at <a href="/cdn-cgi/l/email-protection#0446766d656a2a4c6b63636144606b702a636b72"><span class="__cf_email__" data-cfemail="1e5c6c777f7030567179797b5e7a716a30797168">[email protected]</span></a>. For legal questions,
please contact Mr. David Serody, FHWA Office of the Chief Counsel,
(202) 366-4241, or via email at <a href="/cdn-cgi/l/email-protection#96d2f7e0fff2b8c5f3e4f9f2efd6f2f9e2b8f1f9e0"><span class="__cf_email__" data-cfemail="490d283f202d671a2c3b262d30092d263d672e263f">[email protected]</span></a>. Office hours for
FHWA are from 8:00 a.m. to 4:30 p.m., E.T., Monday through Friday,
except Federal holidays.
SUPPLEMENTARY INFORMATION:
Electronic Access and Filing
A copy of this notice, all comments received on this notice, and
all background material may be viewed online at <a href="http://www.regulations.gov">www.regulations.gov</a>
using the docket number listed above. Electronic retrieval assistance
and guidelines are also available at <a href="http://www.regulations.gov">www.regulations.gov</a>. An electronic
copy of this document also may be downloaded from the Office of the
Federal Register's website at: <a href="http://www.FederalRegister.gov">www.FederalRegister.gov</a> and the U.S.
Government Publishing Office's website at: <a href="http://www.GovInfo.gov">www.GovInfo.gov</a>.
Confidential Business Information
Confidential Business Information (CBI) is commercial or financial
[[Page 17893]]
information that is both customarily and actually treated as private by
its owner. Under the Freedom of Information Act (FOIA) (5 U.S.C. 552),
CBI is exempt from public disclosure. If your comments responsive to
this notice contain commercial or financial information that is
customarily treated as private, that you actually treat as private, and
that is relevant or responsive to this notice, it is important that you
clearly designate the submitted comments as CBI.
You may ask FHWA to give confidential treatment to information you
give to the Agency by taking the following steps: (1) Mark each page of
the original document submission containing CBI as ``Confidential'';
(2) send FHWA, along with the original document, a second copy of the
original document with the CBI deleted; and (3) explain why the
information you are submitting is CBI. The FHWA will protect
confidential information complying with these requirements to the
extent required under applicable law. If DOT receives a FOIA request
for the information that the applicant has marked in accordance with
this notice, DOT will follow the procedures described in its FOIA
regulations at 49 CFR 7.29. Only information that is marked in
accordance with this notice and ultimately determined to be exempt from
disclosure under FOIA and 49 CFR 7.29 will not be released to a
requester or placed in the public docket of this notice. Submissions
containing CBI should be sent to: Mr. Brian Hogge, FHWA, 1200 New
Jersey Avenue SE, HICP-20, Washington, DC 20590 via mail or
<a href="/cdn-cgi/l/email-protection" class="__cf_email__" data-cfemail="6c0e1e050d024204030b0b092c080318420b031a">[email protected]</a> via email. Any comment submissions that FHWA
receives that are not specifically designated as CBI will be placed in
the public docket for this matter.
Background
Section 313(a) of Title 23, U.S.C. requires that all steel, iron,
and manufactured products used in FHWA-funded projects be produced in
the United States. In 1983, FHWA issued a public interest waiver of
general applicability of FHWA's Buy America requirement for
manufactured products, known as the Manufactured Products General
Waiver. See 48 FR 1946 (Jan. 17, 1983); 48 FR 53099 (Nov. 25, 1983).
Based on the Manufactured Products General Waiver, FHWA does not
currently apply its Buy America requirements to manufactured products
except for predominantly iron or steel manufactured products and
predominantly iron or steel components of manufactured products, which
must comply with FHWA's existing Buy America requirements for iron or
steel. For all predominantly iron or steel materials, products, or
components delivered to a project site for permanent incorporation into
a highway project using Title 23, U.S.C. funds, all manufacturing
processes, including applications of a coating, must occur in the
United States. See 23 CFR 635.410. In addition, FHWA's Buy America
requirement applies to all contracts, regardless of the funding source,
of any contract within the scope of a determination under the National
Environmental Policy Act involves an obligation of Title 23, U.S.C.
funds. See 23 U.S.C. 313(h).
On November 15, 2021, the President signed the Bipartisan
Infrastructure Law (BIL), enacted as the Infrastructure Investment and
Jobs Act (Pub. L. 117-58) into law. The BIL includes the Build America,
Buy America (BABA) Act. BIL, div. G Sec. Sec. 70901-53. Section
70914(d) of BABA requires Federal Agencies to review existing general
applicability waivers of Buy America requirements by publishing in the
Federal Register a notice that: (i) describes the justification for the
general applicability waiver; and (ii) requests public comments for a
period of not less than 30 days on the continued need for the general
applicability waiver.
On March 17, 2023, pursuant to Sec. 70914(d) of BABA, FHWA
published a Request for Comment (RFC) on the Manufactured Products
General Waiver in the Federal Register (``Manufactured Products RFC'').
See 88 FR 16517. The FHWA received 9,496 comments in response to the 12
questions that were posed. Based on the contents of that review, and
after considering the President's policy, as embodied in Executive
Order 14005, ``Ensuring the Future Is Made in All of America by All of
America's Workers,'' to maximize the use of goods, products, and
materials produced in the United States; the intent of Congress, as
expressed in BABA's preference against general applicability waivers;
the purpose and goals of domestic content procurement preferences and
waivers; and FHWA's original rationale for issuing the Manufactured
Products General Waiver compared to the current domestic manufacturing
situation, FHWA is proposing to discontinue the Manufactured Products
General Waiver; at the same time, FHWA is issuing a notice of proposed
rulemaking (NPRM) to propose the standards for when a manufactured
product will be considered to be ``produced in the United States'' and
therefore be Buy America-compliant (``Manufactured Products NPRM'').\1\
Interested parties should refer to the NPRM for the reasons and
discussion concerning the proposed discontinuance of the waiver and
proposed regulations.
---------------------------------------------------------------------------
\1\ Buy America Requirements for Manufactured Products, RIN
2125-AG13, Docket No. FHWA-2023-0037.
---------------------------------------------------------------------------
As further explained in the NPRM, the proposed Buy America
requirements for manufactured products mirror the requirements for
manufactured products to be produced under Sec. 70912(6)(B) of BABA
and are substantially aligned with the applicable definitions and
requirements for manufactured products in the Office of Management and
Budget's guidance implementing BABA at 2 CFR part 184. To be ``produced
in the United States,'' a product would need to be manufactured in the
United States and have the cost of components of the manufactured
product that are mined, produced, or manufactured in the United States
be greater than 55 percent of the total cost of all components of the
manufactured product.\2\
---------------------------------------------------------------------------
\2\ Under FHWA's proposed requirements, manufactured products
would not be subject to any other Buy America requirement or
domestic content procurement preference, with two exceptions. First,
all iron or steel components of precast concrete products that are
classified as manufactured products would need to meet FHWA's
existing Buy America requirements for iron or steel. Second, for
iron or steel cabinets or other enclosures of intelligence
transportation systems (ITS) and other electronic hardware systems
that are installed in the highway right-of-way or other real
property and classified as manufactured products, such iron or steel
cabinets and other enclosures would also need to meet FHWA's
existing Buy America requirements for iron or steel.
---------------------------------------------------------------------------
As stated in the Manufactured Products NPRM, FHWA recognizes that
certain types of manufactured products incorporated into FHWA-funded
projects may not be currently available from domestic sources. To
identify the manufactured products to which applying a Buy America
requirement for manufactured products could cause those products to be
rendered unavailable for FHWA-funded projects, FHWA is seeking
additional information and documentation on products that are commonly
procured or are expected to be procured using FHWA financial assistance
that may not be currently manufactured domestically or do not otherwise
meet the 55 percent domestic content standard being proposed in the
NPRM. To ensure FHWA has the most comprehensive and current information
available on the domestic market for manufactured products used in FHWA
projects, FHWA is specifically seeking detailed comments on domestic
materials sourcing, market readiness, pricing, other product supply
[[Page 17894]]
considerations, and whether specific manufactured products or their
components are manufactured in the United States for manufactured
products used in projects that receive FHWA financial assistance.
The Manufactured Products RFC posed the following questions to
manufactured product suppliers:
4. With respect to domestic manufacturers of products previously
procured or expected to be procured using FHWA financial assistance, do
you expect to expand your domestic manufacturing based on the increase
in demand created by recent Federal investments? If so, by how much and
over what time period? If applicable, what is the timeline to bring
online additional capacity compliant with BABA?
In response to question 4, manufacturers who responded appeared
evenly split between expecting to expand domestic manufacturing and not
to expand domestic manufacturing. Of those who were not planning to
expand, the reasons for not expanding included having existing unused
capacity, a lack of sufficient domestic demand, and the high relative
costs of expanding. Several manufacturers were still evaluating
expanding domestic manufacturing while two others reported either
already expanding capacity or that they are currently producing
products meeting the standard for manufactured products under BABA. For
those who expected that they would need to expand their domestic
manufacturing, the timeline to increase domestic capacity was either
stated to be multiple years or an unknown amount of time.
Commenters were also asked in the Manufactured Products RFC:
Are there specific types of manufactured products that are widely
used on Federal-aid highway projects for which a large portion of the
components are known to not be produced in the United States or not
produced in sufficient quantities? If so, what are those components,
what manufacturer produces them, and where are they primarily produced?
What are the obstacles to having those components produced in the
United States? Please provide data to support your comment.
In response, more than two-thirds of commenters indicated there are
frequently used manufactured products and components of manufactured
products that are currently not widely available from domestic
producers. Some of the most frequently mentioned products and
components included the following: assembled electronics; electronic
components; lighting systems and LEDs; ITS, and reflective materials.
Commenters noted obstacles to having those components produced in the
United States, which included that components and raw materials are not
readily available in the United States, needing time for U.S.
production to scale up, low demand and thus low incentives for domestic
production, potential unforeseen shortages, subsidized production in
other countries, the likelihood of more expensive production in the
United States, and intellectual property constraints.
The FHWA is interested in promptly obtaining more information on
the availability of manufactured products that can meet the standard
proposed in the Manufactured Products NPRM in order to assess if
sufficient quantities of products are currently available to comply
with the proposed requirements or whether sufficient products would be
available in the future, and if so, when. The FHWA is also interested
in obtaining more information on the cost of manufactured products that
can meet the standard proposed in the Manufactured Products NPRM,
relative to manufactured products available from foreign or non-
compliant domestic sources.
On August 16, 2023, DOT issued a ``Waiver of Buy America
Requirements for De Minimis Costs and Small Grants'' (De Minimis and
Small Grants Waiver). 88 FR 55817. The De Minimis and Small Grants
Waiver covers the application of Buy America requirements to products
under a single financial assistance award for which (1) the total value
of non-compliant products is no more than the lesser of $1,000,000 or 5
percent of total applicable costs for the project; or (2) the amount of
Federal financial assistance applied to the project, through awards or
subawards, is below $500,000. The FHWA's statutory Buy America
requirements for manufactured products are covered under the scope of
the De Minimis and Small Grants waiver, so it would apply to
manufactured products covered by that waiver even if the Manufactured
Products General Waiver were to be rescinded.
Request for Comments and Information
The FHWA requests information from the public on the following
products or categories of products identified in responses to the
Manufactured Products RFC as being broadly unavailable from Buy
America-compliant sources: \3\
---------------------------------------------------------------------------
\3\ Commenters on the Manufactured Products RFC also cited
certain other products that FHWA believes would likely be considered
construction materials under the standards of 2 CFR part 184 and
would thus not be subject to the requirements for manufactured
products that are being proposed in the NPRM.
<bullet> Retroreflective sheeting
<bullet> LED lamps/lighting systems
<bullet> Utility products
<bullet> ITS hardware
<bullet> Traffic signals and controllers
<bullet> Traffic cameras
<bullet> Changeable message signs
<bullet> Vehicle detection equipment.
The FHWA is also interested in receiving information on other
manufactured products commonly used on FHWA-assisted projects that are
not listed above, but which the commenter believes may not be available
from domestic sources or may be available only at higher prices than
from foreign sources or from non-compliant domestic sources. In
identifying such products, note that some manufactured items may be
classified as iron or steel products or as construction materials,
consistent with the definitions of those items found in the
Manufactured Products NPRM and in 2 CFR part 184.
For each of these products, and based on your understanding of the
Manufactured Product NPRM's proposed requirements, FHWA is requesting
information under five general topic areas: (1) domestic materials
sourcing and manufacturing; (2) market readiness; (3) delivery lead
times; (4) pricing; and (5) other considerations.
When providing this information, FHWA requests that all respondents
clearly specify the products for which you are providing responses.
When providing information on other manufactured products commonly used
on FHWA-assisted products that are not specifically listed above,
please provide a detailed description of the product.
1. Domestic Materials Sourcing and Manufacturing
a. For each of the products or categories of products you
identified above, please specify whether the product meets the
Manufactured Product NPRM's proposed standards for being considered
``produced in the United States,'' as described above. (Yes or No).
b. If you answered ``Yes'' to Topic 1(a), to the best of your
knowledge:
i. Please identify all manufacturers that can either meet the
Manufactured Products NPRM's proposed requirements or can currently
manufacture products or categories of products you specified in the
United States. For products that meet the condition of being
manufactured in the
[[Page 17895]]
United States, please identify the manufacturing location and
percentage of components manufactured in the United States, as
calculated by cost of components (if known).
ii. What is the current production capacity of the products that
can meet the Manufactured Products NPRM's proposed requirements?
iii. What is the anticipated growth in capacity to produce products
that are compliant with the Manufactured Products NPRM's proposed
requirements over the next 5 years? Please explain.
iv. For products able to meet the Manufactured Products NPRM's
proposed requirements, what is the estimated lead time from purchase
order to delivery to the project site? Has this lead time increased or
decreased in recent years?
c. If you answered ``No'' to Topic 1(a):
i. What actions are manufacturers taking or could take to increase
the manufacturing of products that will meet the Manufactured Products
NPRM's proposed requirements?
ii. What additional support or incentives (e.g., financial,
rulemaking certainty) are needed to ensure that a sufficient supply of
products that meet the Manufactured Products NPRM's proposed
requirements will be available to meet the demand for compliant
products on Federal financial assistance projects?
iii. How long might it take to implement the steps needed to
increase or begin production of manufactured products that are
compliant with the Manufactured Products NPRM's proposed requirements?
iv. If a plan is in place to manufacture products compliant with
the Manufactured Products NPRM's proposed requirements, what is the
volume of specific products that will be in compliance with these
requirements and in what time frame?
v. Will the volume of manufactured products that are compliant with
the Manufactured Products NPRM's proposed requirements be ramped up
over time, and, if so, at what annual growth rate?
vi. What are the limiting factors for the product's ability to meet
criteria for compliance under the Manufactured Products NPRM? For
example, are there particular components of these products that cannot
be mined, produced, or manufactured in the United States, and which
make up a significant portion of the cost of the manufactured product?
If so, please describe each component separately, and indicate
approximately what percent of the total cost of all components of the
manufactured products it represents.
2. Market Readiness
a. For each product you identified above, please provide your
observations on the current and near-term domestic demand expected for
these products or categories of products. Does this estimate of future
demand take into account increases in Federal funding amounts for
infrastructure under the BIL, enacted as the Infrastructure Investment
and Jobs Act (Pub. L. 117-58) and the Inflation Reduction Act (Pub. L.
117-169)? Please explain.
b. Please provide information regarding whether the current and/or
near-term domestic manufacturing capacity would be adequate to meet the
expected market demand. Please specify any factors helping or
preventing domestic manufacturing industry from meeting the expected
demand today and in the near-term and provide information on the
current and expected availability or unavailability of key components
or sub-components of the product or category of products you specified.
c. Are there external factors affecting the supply of product that
makes it difficult to credibly communicate the existence of increased
demand, or to credibly commit that such demand will be forthcoming? If
so, please describe those challenges as specifically as possible.
3. Timing
a. Where known, for each product or category of products for which
you are providing information, please specify the current range of
expected product delivery timeframes. Are any existing supply chain
delays applicable or anticipated for the product or critical components
of the product(s)?
b. Please provide information, if available, on expected delivery
timeframe outlooks through the near-term future. Include information,
if known, on whether current timing delivery concerns are related to
any temporary disruption.
c. Provide information on the current and expected near-term
average customer delivery time.
d. Provide information regarding global supply chain constraints,
local permitting, safety requirements, and needs that may affect
delivery timeframes or extend installation time.
4. Pricing
a. For each product identified above as being may be available only
at higher prices than from foreign sources or from non-compliant
domestic sources list the price differential in percentage terms
between foreign and domestic sources of the product.
5. Other Considerations
a. If you answered ``No'' to Topic 1(a), are the quantities of the
project typically used on FHWA-assisted projects small enough that they
might fall below the thresholds specified in the De Minimis and Small
Grants Waiver and thus be subject to that waiver?
b. Are there any other considerations that FHWA should take into
account regarding production, products, product quality, or components
of manufactured products used in FHWA-funded projects that are not
covered by questions 1 through 3?
Shailen P. Bhatt,
Administrator, Federal Highway Administration.
[FR Doc. 2024-05181 Filed 3-11-24; 8:45 am]
BILLING CODE 4910-22-P
</pre><script data-cfasync="false" src="/cdn-cgi/scripts/5c5dd728/cloudflare-static/email-decode.min.js"></script></body>
</html>Indexed from Federal Register on March 12, 2024.
This is legal information, not legal advice. Laws vary by jurisdiction and change frequently. Always verify current law with official sources and consult a licensed attorney in your jurisdiction for advice on your specific situation.