Rule2023-22144
Airworthiness Directives; Airbus SAS Airplanes
Primary source
Metadata and text below are from the Federal Register, a public-domain U.S. government work. Always verify the official published version before relying on it for any legal matter.
Published
October 5, 2023
Effective
November 9, 2023
Issuing agencies
Transportation DepartmentFederal Aviation Administration
Abstract
The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A330-202, A330-203, A330-223, A330-243, and A330-841 airplanes. This AD was prompted by a determination that the cold working process was partially completed on a certain circumferential joint. This AD requires modification of the circumferential joint, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Full Text
<html>
<head>
<title>Federal Register, Volume 88 Issue 192 (Thursday, October 5, 2023)</title>
</head>
<body><pre>
[Federal Register Volume 88, Number 192 (Thursday, October 5, 2023)]
[Rules and Regulations]
[Pages 69023-69025]
From the Federal Register Online via the Government Publishing Office [<a href="http://www.gpo.gov">www.gpo.gov</a>]
[FR Doc No: 2023-22144]
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. FAA-2023-1499; Project Identifier MCAI-2023-00458-T;
Amendment 39-22565; AD 2023-20-06]
RIN 2120-AA64
Airworthiness Directives; Airbus SAS Airplanes
AGENCY: Federal Aviation Administration (FAA), DOT.
ACTION: Final rule.
-----------------------------------------------------------------------
SUMMARY: The FAA is adopting a new airworthiness directive (AD) for
certain Airbus SAS Model A330-202, A330-203, A330-223, A330-243, and
A330-841 airplanes. This AD was prompted by a determination that the
cold working process was partially completed on a certain
circumferential joint. This AD requires modification of the
circumferential joint, as specified in a European Union Aviation Safety
Agency (EASA) AD, which is incorporated by reference. The FAA is
issuing this AD to address the unsafe condition on these products.
DATES: This AD is effective November 9, 2023.
The Director of the Federal Register approved the incorporation by
reference of a certain publication listed in this AD as of November 9,
2023.
ADDRESSES:
AD Docket: You may examine the AD docket at <a href="http://regulations.gov">regulations.gov</a> under
Docket No. FAA-2023-1499; or in person at Docket Operations between 9
a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD
docket contains this final rule, the mandatory continuing airworthiness
information (MCAI), any comments received, and other information. The
address for Docket Operations is U.S. Department of Transportation,
Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200
New Jersey Avenue SE, Washington, DC 20590.
Material Incorporated by Reference:
<bullet> For material incorporated by reference in this AD, contact
EASA, Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; telephone +49 221
8999 000; email <a href="/cdn-cgi/l/email-protection#0445407744616577652a6171766b74652a6171"><span class="__cf_email__" data-cfemail="d79693a497b2b6a4b6f9b2a2a5b8a7b6f9b2a2">[email protected]</span></a>; website easa.europa.eu. You may
find this material on the EASA website at ad.easa.europa.eu.
<bullet> You may view this material at the FAA, Airworthiness
Products Section, Operational Safety Branch, 2200 South 216th St., Des
Moines, WA. For information on the availability of this material at the
FAA, call 206-231-3195. It is also available in the AD docket at
<a href="http://regulations.gov">regulations.gov</a> under Docket No. FAA-2023-1499.
FOR FURTHER INFORMATION CONTACT: Timothy Dowling, Aviation Safety
Engineer, FAA, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590;
phone 206-231-3667; email <a href="/cdn-cgi/l/email-protection#f6a29f9b99829e8fd8a6d8b299819a9f9891b6909797d8919980"><span class="__cf_email__" data-cfemail="2175484c4e5549580f710f654e564d484f46614740400f464e57">[email protected]</span></a>.
SUPPLEMENTARY INFORMATION:
Background
The FAA issued a notice of proposed rulemaking (NPRM) to amend 14
CFR part 39 by adding an AD that would apply to certain Airbus SAS
Model A330-202, A330-203, A330-223, A330-243, and A330-841 airplanes.
The NPRM published in the Federal Register on July 20, 2023 (88 FR
46697). The NPRM was prompted by AD 2023-0054, dated March 14, 2023,
issued by EASA, which is the Technical Agent for the Member States of
the European Union (EASA AD 2023-0054) (also referred to as the MCAI).
The MCAI states that the cold working process was partially completed
on the circumferential joint at frame 58.
In the NPRM, the FAA proposed to require modification of the
circumferential joint, as specified in EASA AD 2023-0054. The NPRM also
proposed to require contacting the Manager, International Validation
Branch, FAA; or EASA; or Airbus SAS's EASA Design Organization Approval
for instructions if any discrepancy is found during accomplishment of
any inspection that is part of the modification. The FAA is issuing
this AD to address a partially completed cold working process on the
circumferential joint at frame 58, which could affect the structural
integrity of the airplane and result in catastrophic failure.
You may examine the MCAI in the AD docket at <a href="http://regulations.gov">regulations.gov</a> under
Docket No. FAA-2023-1499.
Discussion of Final Airworthiness Directive
Comments
The FAA received comments from Air Line Pilots Association,
International (ALPA), who supported the NPRM without change, and an
individual whose comments are unrelated to the unsafe condition
identified in the NPRM.
Conclusion
These products have been approved by the aviation authority of
another country and are approved for operation in the United States.
Pursuant to the FAA's bilateral agreement with this State of Design
Authority, it has notified the FAA of the unsafe condition described in
the MCAI referenced above. The FAA reviewed the relevant data,
considered the comments received, and determined that air safety
requires adopting this AD as proposed. Accordingly, the FAA is issuing
this AD to address the unsafe condition on these products. Except for
minor editorial changes, this AD is adopted as proposed in the NPRM.
None of the changes will increase the economic burden on any operator.
[[Page 69024]]
Related Service Information Under 1 CFR Part 51
EASA AD 2023-0054 specifies procedures for modifying the
circumferential joint at frame 58. Modification includes accomplishing
rotating probe inspections of the fastener holes for cracks, cold
working the fastener holes, and measuring the maximum hole diameter.
EASA AD 2023-0054 also specifies contacting the manufacturer for
instructions if any discrepancy (i.e., any crack or any existing hole
diameter that is more than or equal to the minimum starting hole
diameter) is found during any inspection.
This material is reasonably available because the interested
parties have access to it through their normal course of business or by
the means identified in the ADDRESSES section.
Costs of Compliance
The FAA estimates that this AD affects one airplane of U.S.
registry. The FAA estimates the following costs to comply with this AD:
Estimated Costs for Required Actions
----------------------------------------------------------------------------------------------------------------
Labor cost Parts cost Cost per product Cost on U.S. operators
----------------------------------------------------------------------------------------------------------------
Up to 86 work-hours x $85 per hour = $500 Up to $7,810.............. Up to $7,810.
$7,310.
----------------------------------------------------------------------------------------------------------------
The FAA has received no definitive data on which to base the cost
estimate for the on-condition actions specified in this AD.
The FAA has included all known costs in its cost estimate.
According to the manufacturer, however, some or all costs of this AD
may be covered under warranty, thereby reducing the cost impact on
affected operators.
Authority for This Rulemaking
Title 49 of the United States Code specifies the FAA's authority to
issue rules on aviation safety. Subtitle I, section 106, describes the
authority of the FAA Administrator. Subtitle VII: Aviation Programs,
describes in more detail the scope of the Agency's authority.
The FAA is issuing this rulemaking under the authority described in
Subtitle VII, Part A, Subpart III, Section 44701: General requirements.
Under that section, Congress charges the FAA with promoting safe flight
of civil aircraft in air commerce by prescribing regulations for
practices, methods, and procedures the Administrator finds necessary
for safety in air commerce. This regulation is within the scope of that
authority because it addresses an unsafe condition that is likely to
exist or develop on products identified in this rulemaking action.
Regulatory Findings
This AD will not have federalism implications under Executive Order
13132. This AD will not have a substantial direct effect on the States,
on the relationship between the national government and the States, or
on the distribution of power and responsibilities among the various
levels of government.
For the reasons discussed above, I certify that this AD:
(1) Is not a ``significant regulatory action'' under Executive
Order 12866,
(2) Will not affect intrastate aviation in Alaska, and
(3) Will not have a significant economic impact, positive or
negative, on a substantial number of small entities under the criteria
of the Regulatory Flexibility Act.
List of Subjects in 14 CFR Part 39
Air transportation, Aircraft, Aviation safety, Incorporation by
reference, Safety.
The Amendment
Accordingly, under the authority delegated to me by the
Administrator, the FAA amends 14 CFR part 39 as follows:
PART 39--AIRWORTHINESS DIRECTIVES
0
1. The authority citation for part 39 continues to read as follows:
Authority: 49 U.S.C. 106(g), 40113, 44701.
Sec. 39.13 [Amended]
0
2. The FAA amends Sec. 39.13 by adding the following new airworthiness
directive:
2023-20-06 Airbus SAS: Amendment 39-22565; Docket No. FAA-2023-1499;
Project Identifier MCAI-2023-00458-T.
(a) Effective Date
This airworthiness directive (AD) is effective November 9, 2023.
(b) Affected ADs
None.
(c) Applicability
This AD applies to Airbus SAS Model A330-202, A330-203, A330-
223, A330-243, and A330-841 airplanes, certificated in any category,
manufacturer serial numbers 1780, 1782, 1784, 1785, 1805, 1823,
1835, 1845, 1847, 1854, 1859, 1864, 1872, 1877, 1878, 1882, 1888,
1932, 1936, 1964, and 1969.
(d) Subject
Air Transport Association (ATA) of America Code 53, Fuselage.
(e) Unsafe Condition
This AD was prompted by a determination that the cold working
process was partially performed on the circumferential joint at
frame 58. The FAA is issuing this AD to address a partially
completed cold working process on the circumferential joint at frame
58. The unsafe condition, if not addressed, could affect the
structural integrity of the airplane and result in catastrophic
failure.
(f) Compliance
Comply with this AD within the compliance times specified,
unless already done.
(g) Requirements
Except as specified in paragraph (h) of this AD: Comply with all
required actions and compliance times specified in, and in
accordance with, European Union Aviation Safety Agency (EASA) AD
2023-0054, dated March 14, 2023 (EASA AD 2023-0054).
(h) Exceptions to EASA AD 2023-0054
(1) This AD does not adopt the ``Remarks'' section of EASA AD
2023-0054.
(2) Where paragraph (2) of EASA AD 2023-0054 specifies
contacting Airbus before further flight for approved instructions if
any discrepancy is detected during accomplishment of any inspection
that is part of the modification, this AD requires repairing the
discrepancy before further flight using a method approved by the
Manager, International Validation Branch, FAA; or EASA; or Airbus
SAS's EASA Design Organization Approval (DOA). If approved by the
DOA, the approval must include the DOA-authorized signature.
(3) Where paragraph (3) of EASA AD 2023-0054 refers to its
effective date, this AD requires using the effective date of this
AD.
(4) Where Note 2 of EASA AD 2023-0054 specifies Airbus Operators
Information Telex (OIT) 999.0086/11 can be used to determine whether
an airplane is operated short range (SR) or long range (LR), this AD
requires using the following definitions: the term ``short range''
applies to an airplane with an average flight time lower than 1.5
flight hours per flight cycle, and the term ``long range'' applies
to an airplane with an average flight time equal to or higher than
1.5 flight hours per flight cycle. For determining the SR and LR
airplanes, the average flight time is the
[[Page 69025]]
total accumulated flight hours, counted from takeoff to touchdown,
divided by the total accumulated flight cycles at the effective date
of this AD.
(i) Additional AD Provisions
The following provisions also apply to this AD:
(1) Alternative Methods of Compliance (AMOCs): The Manager,
International Validation Branch, FAA, has the authority to approve
AMOCs for this AD, if requested using the procedures found in 14 CFR
39.19. In accordance with 14 CFR 39.19, send your request to your
principal inspector or responsible Flight Standards Office, as
appropriate. If sending information directly to the International
Validation Branch, send it to the attention of the person identified
in paragraph (j) of this AD. Information may be emailed to: <a href="/cdn-cgi/l/email-protection#d6effb978085fb979f84fbe1e5e6fb979b999596b0b7b7f8b1b9a0"><span class="__cf_email__" data-cfemail="8bb2a6caddd8a6cac2d9a6bcb8bba6cac6c4c8cbedeaeaa5ece4fd">[email protected]</span></a>. Before using any approved AMOC, notify your
appropriate principal inspector, or lacking a principal inspector,
the manager of the responsible Flight Standards Office.
(2) Contacting the Manufacturer: For any requirement in this AD
to obtain instructions from a manufacturer, the instructions must be
accomplished using a method approved by the Manager, International
Validation Branch, FAA; or EASA; or Airbus SAS's EASA DOA. If
approved by the DOA, the approval must include the DOA-authorized
signature.
(3) Required for Compliance (RC): Except as required by
paragraphs (h)(2) and (i)(2) of this AD, if any service information
contains procedures or tests that are identified as RC, those
procedures and tests must be done to comply with this AD; any
procedures or tests that are not identified as RC are recommended.
Those procedures and tests that are not identified as RC may be
deviated from using accepted methods in accordance with the
operator's maintenance or inspection program without obtaining
approval of an AMOC, provided the procedures and tests identified as
RC can be done and the airplane can be put back in an airworthy
condition. Any substitutions or changes to procedures or tests
identified as RC require approval of an AMOC.
(j) Additional Information
For more information about this AD, contact Timothy Dowling,
Aviation Safety Engineer, FAA, 1600 Stewart Avenue, Suite 410,
Westbury, NY 11590; phone 206-231-3667; email
<a href="/cdn-cgi/l/email-protection#adf9c4c0c2d9c5d483fd83e9c2dac1c4c3caedcbcccc83cac2db"><span class="__cf_email__" data-cfemail="02566b6f6d766a7b2c522c466d756e6b6c65426463632c656d74">[email protected]</span></a>.
(k) Material Incorporated by Reference
(1) The Director of the Federal Register approved the
incorporation by reference (IBR) of the service information listed
in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.
(2) You must use this service information as applicable to do
the actions required by this AD, unless this AD specifies otherwise.
(i) European Union Aviation Safety Agency (EASA) AD 2023-0054,
dated March 14, 2023.
(ii) [Reserved]
(3) For EASA AD 2023-0054, contact EASA, Konrad-Adenauer-Ufer 3,
50668 Cologne, Germany; telephone +49 221 8999 000; email
<a href="/cdn-cgi/l/email-protection#0a4b4e794a6f6b796b246f7f78657a6b246f7f"><span class="__cf_email__" data-cfemail="17565364577276647639726265786776397262">[email protected]</span></a>; website easa.europa.eu. You may find this EASA
AD on the EASA website at ad.easa.europa.eu.
(4) You may view this material at the FAA, Airworthiness
Products Section, Operational Safety Branch, 2200 South 216th St.,
Des Moines, WA. For information on the availability of this material
at the FAA, call 206-231-3195.
(5) You may view this material that is incorporated by reference
at the National Archives and Records Administration (NARA). For
information on the availability of this material at NARA, email
<a href="/cdn-cgi/l/email-protection#573125793e3924273234233e3839173936253679303821"><span class="__cf_email__" data-cfemail="7513075b1c1b06051016011c1a1b351b1407145b121a03">[email protected]</span></a>, or go to: <a href="http://www.archives.gov/federal-register/cfr/ibr-locations.html">www.archives.gov/federal-register/cfr/ibr-locations.html</a>.
Issued on September 28, 2023.
Victor Wicklund,
Deputy Director, Compliance & Airworthiness Division, Aircraft
Certification Service.
[FR Doc. 2023-22144 Filed 10-4-23; 8:45 am]
BILLING CODE 4910-13-P
</pre><script data-cfasync="false" src="/cdn-cgi/scripts/5c5dd728/cloudflare-static/email-decode.min.js"></script></body>
</html>Indexed from Federal Register on October 5, 2023.
This is legal information, not legal advice. Laws vary by jurisdiction and change frequently. Always verify current law with official sources and consult a licensed attorney in your jurisdiction for advice on your specific situation.