Proposed Rule2023-18692
Airworthiness Directives; Dassault Aviation Airplanes
Primary source
Metadata and text below are from the Federal Register, a public-domain U.S. government work. Always verify the official published version before relying on it for any legal matter.
Published
August 30, 2023
Issuing agencies
Transportation DepartmentFederal Aviation Administration
Abstract
The FAA proposes to supersede Airworthiness Directive (AD) 2023-04-18, which applies to all Dassault Aviation Model FALCON 2000 airplanes. AD 2023-04-18 requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. Since the FAA issued AD 2023-04- 18, the FAA has determined that new or more restrictive airworthiness limitations are necessary. This proposed AD would continue to require certain actions in AD 2023-04-18 and would require revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.
Full Text
<html>
<head>
<title>Federal Register, Volume 88 Issue 167 (Wednesday, August 30, 2023)</title>
</head>
<body><pre>
[Federal Register Volume 88, Number 167 (Wednesday, August 30, 2023)]
[Proposed Rules]
[Pages 59815-59818]
From the Federal Register Online via the Government Publishing Office [<a href="http://www.gpo.gov">www.gpo.gov</a>]
[FR Doc No: 2023-18692]
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. FAA-2023-1804; Project Identifier MCAI-2023-00675-T]
RIN 2120-AA64
Airworthiness Directives; Dassault Aviation Airplanes
AGENCY: Federal Aviation Administration (FAA), DOT.
ACTION: Notice of proposed rulemaking (NPRM).
-----------------------------------------------------------------------
SUMMARY: The FAA proposes to supersede Airworthiness Directive (AD)
2023-04-18, which applies to all Dassault Aviation Model FALCON 2000
airplanes. AD 2023-04-18 requires revising the existing maintenance or
inspection program, as applicable, to incorporate new or more
restrictive airworthiness limitations. Since the FAA issued AD 2023-04-
18, the FAA has determined that new or more restrictive airworthiness
limitations are necessary. This proposed AD would continue to require
certain actions in AD 2023-04-18 and would require revising the
existing maintenance or inspection program, as applicable, to
incorporate new or more restrictive airworthiness limitations, as
specified in a European Union Aviation Safety Agency (EASA) AD, which
is proposed for incorporation by reference (IBR). The FAA is proposing
this AD to address the unsafe condition on these products.
DATES: The FAA must receive comments on this proposed AD by October 16,
2023.
ADDRESSES: You may send comments, using the procedures found in 14 CFR
11.43 and 11.45, by any of the following methods:
<bullet> Federal eRulemaking Portal: Go to <a href="http://regulations.gov">regulations.gov</a>. Follow
the instructions for submitting comments.
<bullet> Fax: 202-493-2251.
<bullet> Mail: U.S. Department of Transportation, Docket
Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New
Jersey Avenue SE, Washington, DC 20590.
<bullet> Hand Delivery: Deliver to Mail address above between 9
a.m. and 5 p.m., Monday through Friday, except Federal holidays.
AD Docket: You may examine the AD docket at <a href="http://regulations.gov">regulations.gov</a> under
Docket No. FAA-2023-1804; or in person at Docket Operations between 9
a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD
docket contains this NPRM, the mandatory continuing airworthiness
information (MCAI), any comments received, and other information. The
street address for Docket Operations is listed above.
Material Incorporated by Reference:
<bullet> For material that is proposed for IBR in this NPRM,
contact EASA, Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; telephone
+49 221 8999 000; email <a href="/cdn-cgi/l/email-protection#c48580b784a1a5b7a5eaa1b1b6abb4a5eaa1b1"><span class="__cf_email__" data-cfemail="aaebeed9eacfcbd9cb84cfdfd8c5dacb84cfdf">[email protected]</span></a>; website easa.europa.eu. You
may find this material on the EASA website at ad.easa.europa.eu. It is
also available at <a href="http://regulations.gov">regulations.gov</a> under Docket No. FAA-2023-1804.
<bullet> You may view this service information at the FAA,
Airworthiness Products Section, Operational Safety Branch, 2200 South
216th St., Des Moines, WA. For information on the availability of this
material at the FAA, call 206-231-3195.
FOR FURTHER INFORMATION CONTACT: Tom Rodriguez, Aviation Safety
Engineer, FAA, 1600 Stewart Avenue, Suite 410,
[[Page 59816]]
Westbury, NY 11590; telephone 206-231-3226; email
<a href="/cdn-cgi/l/email-protection#5723383a79253833253e3022322d1731363679303821"><span class="__cf_email__" data-cfemail="b1c5dedc9fc3ded5c3d8d6c4d4cbf1d7d0d09fd6dec7">[email protected]</span></a>.
SUPPLEMENTARY INFORMATION:
Comments Invited
The FAA invites you to send any written relevant data, views, or
arguments about this proposal. Send your comments to an address listed
under ADDRESSES. Include ``Docket No. FAA-2023-1804; Project Identifier
MCAI-2023-00675-T'' at the beginning of your comments. The most helpful
comments reference a specific portion of the proposal, explain the
reason for any recommended change, and include supporting data. The FAA
will consider all comments received by the closing date and may amend
this proposal because of those comments.
Except for Confidential Business Information (CBI) as described in
the following paragraph, and other information as described in 14 CFR
11.35, the FAA will post all comments received, without change, to
<a href="http://regulations.gov">regulations.gov</a>, including any personal information you provide. The
agency will also post a report summarizing each substantive verbal
contact received about this NPRM.
Confidential Business Information
CBI is commercial or financial information that is both customarily
and actually treated as private by its owner. Under the Freedom of
Information Act (FOIA) (5 U.S.C. 552), CBI is exempt from public
disclosure. If your comments responsive to this NPRM contain commercial
or financial information that is customarily treated as private, that
you actually treat as private, and that is relevant or responsive to
this NPRM, it is important that you clearly designate the submitted
comments as CBI. Please mark each page of your submission containing
CBI as ``PROPIN.'' The FAA will treat such marked submissions as
confidential under the FOIA, and they will not be placed in the public
docket of this NPRM. Submissions containing CBI should be sent to Tom
Rodriguez, Aviation Safety Engineer, FAA, 1600 Stewart Avenue, Suite
410, Westbury, NY 11590; telephone 206-231-3226; email
<a href="/cdn-cgi/l/email-protection#b6c2d9db98c4d9d2c4dfd1c3d3ccf6d0d7d798d1d9c0"><span class="__cf_email__" data-cfemail="6713080a49150803150e0012021d2701060649000811">[email protected]</span></a>. Any commentary that the FAA receives that is not
specifically designated as CBI will be placed in the public docket for
this rulemaking.
Background
The FAA issued AD 2023-04-18, Amendment 39-22365 (88 FR 15607,
March 14, 2023) (AD 2023-04-18), for all Dassault Aviation Model FALCON
2000 airplanes. AD 2023-04-18 was prompted by an MCAI originated by
EASA, which is the Technical Agent for the Member States of the
European Union. EASA issued AD 2022-0135, dated July 6, 2022 (EASA AD
2022-0135) (which corresponds to FAA AD 2023-04-18), to correct an
unsafe condition.
AD 2023-04-18 requires revising the existing maintenance or
inspection program, as applicable, to incorporate new or more
restrictive airworthiness limitations. The FAA issued AD 2023-04-18 to
address reduced controllability of the airplane. AD 2023-04-18
specifies that accomplishing the revision required by that AD
terminates certain requirements of AD 2010-26-05, Amendment 39-16544
(75 FR 79952, December 21, 2010) (AD 2010-26-05) for Model FALCON 2000
airplanes only. This proposed AD would therefore continue to allow that
terminating action.
Actions Since AD 2023-04-18 Was Issued
Since the FAA issued AD 2023-04-18, EASA superseded AD 2022-0135
and issued EASA AD 2023-0099, dated May 11, 2023 (EASA AD 2023-0099)
(referred to after this as the MCAI), for all Dassault Aviation Model
FALCON 2000 airplanes. The MCAI states that new or more restrictive
airworthiness limitations have been developed.
The FAA is proposing this AD to address reduced controllability of
the airplane. You may examine the MCAI in the AD docket at
<a href="http://regulations.gov">regulations.gov</a> under Docket No. FAA-2023-1804.
Related Service Information Under 1 CFR Part 51
EASA AD 2023-0099 specifies new or more restrictive airworthiness
limitations for airplane structures and safe life limits.
This proposed AD would also require EASA AD 2022-0135, dated July
6, 2022, which the Director of the Federal Register approved for
incorporation by reference as of April 18, 2023 (88 FR 15607, March 14,
2023).
This material is reasonably available because the interested
parties have access to it through their normal course of business or by
the means identified in ADDRESSES.
FAA's Determination
This product has been approved by the aviation authority of another
country and is approved for operation in the United States. Pursuant to
the FAA's bilateral agreement with this State of Design Authority, it
has notified the FAA of the unsafe condition described in the MCAI
referenced above. The FAA is issuing this NPRM after determining that
the unsafe condition described previously is likely to exist or develop
in other products of the same type design.
Proposed AD Requirements in This NPRM
This proposed AD would retain certain requirements of AD 2023-04-
18. This proposed AD would also require revising the existing
maintenance or inspection program, as applicable, to incorporate
additional new or more restrictive airworthiness limitations, which are
specified in EASA AD 2023-0099 already described, as proposed for
incorporation by reference. Any differences with EASA AD 2023-0099 are
identified as exceptions in the regulatory text of this AD.
This proposed AD would require revisions to certain operator
maintenance documents to include new actions (e.g., inspections).
Compliance with these actions is required by 14 CFR 91.403(c). For
airplanes that have been previously modified, altered, or repaired in
the areas addressed by this proposed AD, the operator may not be able
to accomplish the actions described in the revisions. In this
situation, to comply with 14 CFR 91.403(c), the operator must request
approval for an alternative method of compliance (AMOC) according to
paragraph (n)(1) of this proposed AD.
Explanation of Required Compliance Information
In the FAA's ongoing efforts to improve the efficiency of the AD
process, the FAA developed a process to use some civil aviation
authority (CAA) ADs as the primary source of information for compliance
with requirements for corresponding FAA ADs. The FAA has been
coordinating this process with manufacturers and CAAs. As a result, the
FAA proposes to retain the IBR of EASA AD 2022-0135 and incorporate
EASA AD 2023-0099 by reference in the FAA final rule. This proposed AD
would, therefore, require compliance with EASA AD 2023-0099 and EASA AD
2022-0135 through that incorporation, except for any differences
identified as exceptions in the regulatory text of this proposed AD.
Using common terms that are the same as the heading of a particular
section in EASA AD 2023-0099 or EASA AD 2022-0135 does not mean that
operators need comply only with that section. For example, where the AD
requirement refers to ``all required actions and compliance times,''
compliance with this AD requirement is not limited to the section
titled ``Required Action(s)
[[Page 59817]]
and Compliance Time(s)'' in EASA AD 2023-0099 or EASA AD 2022-0135.
Service information required by EASA AD 2023-0099 and EASA AD 2022-0135
for compliance will be available at <a href="http://regulations.gov">regulations.gov</a> by searching for
and locating Docket No. FAA-2023-1804 after the FAA final rule is
published.
Airworthiness Limitation ADs Using the New Process
The FAA's process of incorporating by reference MCAI ADs as the
primary source of information for compliance with corresponding FAA ADs
has been limited to certain MCAI ADs (primarily those with service
bulletins as the primary source of information for accomplishing the
actions required by the FAA AD). However, the FAA is now expanding the
process to include MCAI ADs that require a change to airworthiness
limitation documents, such as airworthiness limitation sections.
For these ADs that incorporate by reference an MCAI AD that changes
airworthiness limitations, the FAA requirements are unchanged.
Operators must revise the existing maintenance or inspection program,
as applicable, to incorporate the information specified in the new
airworthiness limitation document. The airworthiness limitations must
be followed according to 14 CFR 91.403(c) and 91.409(e).
The previous format of the airworthiness limitation ADs included a
paragraph that specified that no alternative actions (e.g.,
inspections) or intervals may be used unless the actions and intervals
are approved as an AMOC in accordance with the procedures specified in
the AMOCs paragraph under ``Additional AD Provisions.'' This new format
includes a ``New Provisions for Alternative Actions and Intervals''
paragraph that does not specifically refer to AMOCs, but operators may
still request an AMOC to use an alternative action or interval.
Costs of Compliance
The FAA estimates that this AD, if adopted as proposed, would
affect 168 airplanes of U.S. registry. The FAA estimates the following
costs to comply with this proposed AD:
The FAA estimates the total cost per operator for the retained
actions from AD 2021-03-11 to be $7,650 (90 work-hours x $85 per work-
hour).
The FAA has determined that revising the existing maintenance or
inspection program takes an average of 90 work-hours per operator,
although the agency recognizes that this number may vary from operator
to operator. Since operators incorporate maintenance or inspection
program changes for their affected fleet(s), the FAA has determined
that a per-operator estimate is more accurate than a per-airplane
estimate.
The FAA estimates the total cost per operator for the new proposed
actions to be $7,650 (90 work-hours x $85 per work-hour).
Authority for This Rulemaking
Title 49 of the United States Code specifies the FAA's authority to
issue rules on aviation safety. Subtitle I, section 106, describes the
authority of the FAA Administrator. Subtitle VII: Aviation Programs,
describes in more detail the scope of the Agency's authority.
The FAA is issuing this rulemaking under the authority described in
Subtitle VII, Part A, Subpart III, Section 44701: General requirements.
Under that section, Congress charges the FAA with promoting safe flight
of civil aircraft in air commerce by prescribing regulations for
practices, methods, and procedures the Administrator finds necessary
for safety in air commerce. This regulation is within the scope of that
authority because it addresses an unsafe condition that is likely to
exist or develop on products identified in this rulemaking action.
Regulatory Findings
The FAA determined that this proposed AD would not have federalism
implications under Executive Order 13132. This proposed AD would not
have a substantial direct effect on the States, on the relationship
between the national Government and the States, or on the distribution
of power and responsibilities among the various levels of government.
For the reasons discussed above, I certify this proposed
regulation:
(1) Is not a ``significant regulatory action'' under Executive
Order 12866,
(2) Would not affect intrastate aviation in Alaska, and
(3) Would not have a significant economic impact, positive or
negative, on a substantial number of small entities under the criteria
of the Regulatory Flexibility Act.
List of Subjects in 14 CFR Part 39
Air transportation, Aircraft, Aviation safety, Incorporation by
reference, Safety.
The Proposed Amendment
Accordingly, under the authority delegated to me by the
Administrator, the FAA proposes to amend 14 CFR part 39 as follows:
PART 39--AIRWORTHINESS DIRECTIVES
0
1. The authority citation for part 39 continues to read as follows:
Authority: 49 U.S.C. 106(g), 40113, 44701.
Sec. 39.13 [Amended]
0
2. The FAA amends Sec. 39.13 by:
0
a. Removing Airworthiness Directive (AD) 2023-04-18, Amendment 39-22365
(88 FR 15607, March 14, 2023); and
0
b. Adding the following new AD:
Dassault Aviation: Docket No. FAA-2023-1804; Project Identifier
MCAI-2023-00675-T.
(a) Comments Due Date
The FAA must receive comments on this airworthiness directive
(AD) by October 16, 2023.
(b) Affected ADs
(1) This AD replaces AD 2023-04-18, Amendment 39-22365 (88 FR
15607, March 14, 2023) (AD 2023-04-18).
(2) This AD affects AD 2010-26-05, Amendment 39-16544 (75 FR
79952, December 21, 2010) (AD 2010-26-05).
(c) Applicability
This AD applies to all Dassault Aviation Model FALCON 2000
airplanes, certificated in any category.
(d) Subject
Air Transport Association (ATA) of America Code 05, Time Limits/
Maintenance Checks.
(e) Unsafe Condition
This AD was prompted by a determination that new or more
restrictive airworthiness limitations are necessary. The FAA is
issuing this AD to address reduced controllability of the airplane.
(f) Compliance
Comply with this AD within the compliance times specified,
unless already done.
(g) Retained Revision of the Existing Maintenance or Inspection
Program, With No Changes
This paragraph restates the requirements of paragraph (j) of AD
2023-04-18, with no changes. Except as specified in paragraph (h) of
this AD: Comply with all required actions and compliance times
specified in, and in accordance with, European Union Aviation Safety
Agency (EASA) AD 2022-0135, dated July 6, 2022 (EASA AD 2022-0135).
Accomplishing the revision of the existing maintenance or inspection
program required by paragraph (j) of this AD terminates the
requirements of this paragraph.
(h) Retained Exceptions to EASA AD 2022-0135, With No Changes
This paragraph restates the exceptions specified in paragraph
(k) of AD 2023-04-18, with no changes.
[[Page 59818]]
(1) The requirements specified in paragraphs (1) and (2) of EASA
AD 2022-0135 do not apply to this AD.
(2) Paragraph (3) of EASA AD 2022-0135 specifies revising ``the
approved AMP'' within 12 months after its effective date, but this
AD requires revising the existing maintenance or inspection program,
as applicable, within 90 days after April 18, 2023 (the effective
date of AD 2023-04-18).
(3) The initial compliance time for doing the tasks specified in
paragraph (3) of EASA AD 2022-0135 is at the applicable
``limitations'' and ``associated thresholds'' as incorporated by the
requirements of paragraph (3) of EASA AD 2022-0135, or within 90
days after April 18, 2023 (the effective date of AD 2023-04-18),
whichever occurs later.
(4) The provisions specified in paragraphs (4) and (5) of EASA
AD 2022-0135 do not apply to this AD.
(5) The ``Remarks'' section of EASA AD 2022-0135 does not apply
to this AD.
(i) Retained No Alternative Actions or Intervals With a New Exception
This paragraph restates the requirements of paragraph (l) of AD
2023-04-18, with a new exception. Except as required by paragraph
(j) of this AD, after the existing maintenance or inspection program
has been revised as required by paragraph (g) of this AD, no
alternative actions (e.g., inspections) or intervals may be used
unless they are approved as specified in the provisions of the
``Ref. Publications'' section of EASA AD 2022-0135.
(j) New Maintenance or Inspection Program Revision
Except as specified in paragraph (k) of this AD: Comply with all
required actions and compliance times specified in, and in
accordance with, EASA AD 2023-0099, dated May 11, 2023 (EASA AD
2023-0099). Accomplishing the maintenance or inspection program
revision required by this paragraph terminates the requirements of
paragraph (g) of this AD.
(k) Exceptions to EASA AD 2023-0099
(1) This AD does not adopt the requirements specified in
paragraphs (1) and (2) of EASA AD 2023-0099.
(2) Paragraph (3) of EASA AD 2023-0099 specifies revising ``the
approved AMP'' within 12 months after its effective date, but this
AD requires revising the existing maintenance or inspection program,
as applicable, within 90 days after the effective date of this AD.
(3) The initial compliance time for doing the tasks specified in
paragraph (3) of EASA AD 2023-0099 is at the applicable
``limitations'' and ``associated thresholds'' as incorporated by the
requirements of paragraph (3) of EASA AD 2023-0099, or within 90
days after the effective date of this AD, whichever occurs later.
(4) This AD does not adopt the provisions specified in
paragraphs (4) and (5) of EASA AD 2023-0099.
(5) This AD does not adopt the ``Remarks'' section of EASA AD
2023-0099.
(l) New Provisions for Alternative Actions and Intervals
After the existing maintenance or inspection program has been
revised as required by paragraph (j) of this AD, no alternative
actions (e.g., inspections), and intervals are allowed unless they
are approved as specified in the provisions of the ``Ref.
Publications'' section of EASA AD 2023-0099.
(m) Terminating Action for Certain Requirements in AD 2010-26-05
Accomplishing the actions required by paragraphs (g) or (j) of
this AD terminates the requirements of paragraph (g) of AD 2010-26-
05 for Model FALCON 2000 airplanes only.
(n) Additional AD Provisions
The following provisions also apply to this AD:
(1) Alternative Methods of Compliance (AMOCs): The Manager,
International Validation Branch, FAA, has the authority to approve
AMOCs for this AD, if requested using the procedures found in 14 CFR
39.19. In accordance with 14 CFR 39.19, send your request to your
principal inspector or responsible Flight Standards Office, as
appropriate. If sending information directly to the International
Validation Branch, send it to the attention of the person identified
in paragraph (o) of this AD. Information may be emailed to: <a href="/cdn-cgi/l/email-protection#7d44503c2b2e503c342f504a4e4d503c30323e3d1b1c1c531a120b"><span class="__cf_email__" data-cfemail="8fb6a2ced9dca2cec6dda2b8bcbfa2cec2c0cccfe9eeeea1e8e0f9">[email protected]</span></a>. Before using any approved AMOC, notify your
appropriate principal inspector, or lacking a principal inspector,
the manager of the responsible Flight Standards Office.
(2) Contacting the Manufacturer: For any requirement in this AD
to obtain instructions from a manufacturer, the instructions must be
accomplished using a method approved by the Manager, International
Validation Branch, FAA; or EASA; or Dassault Aviation's EASA Design
Organization Approval (DOA). If approved by the DOA, the approval
must include the DOA-authorized signature.
(o) Additional Information
For more information about this AD, contact Tom Rodriguez,
Aviation Safety Engineer, FAA, 1600 Stewart Avenue, Suite 410,
Westbury, NY 11590; telephone 206-231-3226; email
<a href="/cdn-cgi/l/email-protection#1c687371326e73786e757b6979665c7a7d7d327b736a"><span class="__cf_email__" data-cfemail="5f2b3032712d303b2d36382a3a251f393e3e71383029">[email protected]</span></a>.
(p) Material Incorporated by Reference
(1) The Director of the Federal Register approved the
incorporation by reference (IBR) of the service information listed
in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.
(2) You must use this service information as applicable to do
the actions required by this AD, unless this AD specifies otherwise.
(3) The following service information was approved for IBR on
[DATE 35 DAYS AFTER PUBLICATION OF THE FINAL RULE].
(i) European Union Aviation Safety Agency (EASA) AD 2023-0099,
dated May 11, 2023.
(ii) [Reserved]
(4) The following service information was approved for IBR on
April 18, 2023 (88 FR 15607, March 14, 2023).
(i) European Union Aviation Safety Agency (EASA) AD 2022-0135,
dated July 6, 2022.
(ii) [Reserved]
(5) For EASA ADs 2023-0099 and 2022-0135, contact EASA, Konrad-
Adenauer-Ufer 3, 50668 Cologne, Germany; telephone +49 221 8999 000;
email <a href="/cdn-cgi/l/email-protection#aaebeed9eacfcbd9cb84cfdfd8c5dacb84cfdf"><span class="__cf_email__" data-cfemail="0544417645606476642b6070776a75642b6070">[email protected]</span></a>; website easa.europa.eu. You may find these
EASA ADs on the EASA website at ad.easa.europa.eu.
(6) You may view this service information at the FAA,
Airworthiness Products Section, Operational Safety Branch, 2200
South 216th St., Des Moines, WA. For information on the availability
of this material at the FAA, call 206-231-3195.
(7) You may view this service information that is incorporated
by reference at the National Archives and Records Administration
(NARA). For information on the availability of this material at
NARA, email <a href="/cdn-cgi/l/email-protection#dcbaaef2b5b2afacb9bfa8b5b3b29cb2bdaebdf2bbb3aa"><span class="__cf_email__" data-cfemail="1177633f787f6261747265787e7f517f7063703f767e67">[email protected]</span></a>, or go to: <a href="http://www.archives.gov/federal-register/cfr/ibr-locations.html">www.archives.gov/federal-register/cfr/ibr-locations.html</a>.
Issued on August 24, 2023.
Victor Wicklund,
Deputy Director, Compliance & Airworthiness Division, Aircraft
Certification Service.
[FR Doc. 2023-18692 Filed 8-29-23; 8:45 am]
BILLING CODE 4910-13-P
</pre><script data-cfasync="false" src="/cdn-cgi/scripts/5c5dd728/cloudflare-static/email-decode.min.js"></script></body>
</html>Indexed from Federal Register on August 30, 2023.
This is legal information, not legal advice. Laws vary by jurisdiction and change frequently. Always verify current law with official sources and consult a licensed attorney in your jurisdiction for advice on your specific situation.