Airworthiness Directives; Airbus SAS Airplanes
Primary source
Metadata and text below are from the Federal Register, a public-domain U.S. government work. Always verify the official published version before relying on it for any legal matter.
Issuing agencies
Abstract
The FAA proposes to supersede Airworthiness Directive (AD) 2019-07-05, which applies to all Airbus SAS Model A318 series airplanes; Model A319-111, -112, -113, -114, -115, -131, -132, and -133 airplanes; Model A320-211, -212, -214, -216, -231, -232, and -233 airplanes; and Model A321-111, -112, -131, -211, -212, -213, -231, and -232 airplanes. AD 2019-07-05 requires repetitive inspections for cracking of the 10VU rack fitting lugs and repair of any cracking. Since the FAA issued AD 2019-07-05, it was determined that certain repetitive inspection intervals need to be revised. This proposed AD would retain the requirements of AD 2019-07-05, with reduced compliance times and would remove airplanes having a certain modification from the applicability. The FAA is proposing this AD to address the unsafe condition on these products.
This is legal information, not legal advice. Laws vary by jurisdiction and change frequently. Always verify current law with official sources and consult a licensed attorney in your jurisdiction for advice on your specific situation.