Notice2023-13205
Parts and Accessories Necessary for Safe Operation; Pi Variables, Inc Application for an Exemption
Primary source
Metadata and text below are from the Federal Register, a public-domain U.S. government work. Always verify the official published version before relying on it for any legal matter.
Published
June 22, 2023
Effective
June 27, 2023
Issuing agencies
Transportation DepartmentFederal Motor Carrier Safety Administration
Abstract
FMCSA announces its decision to grant a limited 5-year exemption to Pi Variables, Inc. (Pi Variables) to allow Pi-Lit Smart Sequential Road Flares (LED flares) to be deployed when commercial motor vehicles (CMVs) are stopped upon the traveled portion of a highway or the shoulder of a highway for any cause other than necessary traffic stops. The Federal Motor Carrier Safety Regulations (FMCSRs) require one of the following warning devices to be deployed when a CMV is stopped upon the traveled portion of a highway or the shoulder of a highway for any cause other than necessary traffic stops: three bidirectional emergency reflective triangles; at least 6 fusees or at least 3 liquid-burning flares. The vehicle must have as many additional fusees or liquid-burning flares as are necessary to satisfy the regulatory requirements. Other warning devices may be used in addition to, but not in lieu of, the required warning devices, provided they do not decrease the effectiveness of the required devices. The Agency has determined that granting the exemption would likely achieve a level of safety equivalent to or greater than the level of safety provided by the FMCSRs.
Full Text
<html>
<head>
<title>Federal Register, Volume 88 Issue 119 (Thursday, June 22, 2023)</title>
</head>
<body><pre>
[Federal Register Volume 88, Number 119 (Thursday, June 22, 2023)]
[Notices]
[Pages 40920-40922]
From the Federal Register Online via the Government Publishing Office [<a href="http://www.gpo.gov">www.gpo.gov</a>]
[FR Doc No: 2023-13205]
=======================================================================
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
Federal Motor Carrier Safety Administration
[Docket No. FMCSA-2021-0187]
Parts and Accessories Necessary for Safe Operation; Pi Variables,
Inc Application for an Exemption
AGENCY: Federal Motor Carrier Safety Administration (FMCSA), DOT.
ACTION: Notice of final disposition.
-----------------------------------------------------------------------
SUMMARY: FMCSA announces its decision to grant a limited 5-year
exemption to Pi Variables, Inc. (Pi Variables) to allow Pi-Lit Smart
Sequential Road Flares (LED flares) to be deployed when commercial
motor vehicles (CMVs) are stopped upon the traveled portion of a
highway or the shoulder of a highway for any cause other than necessary
traffic stops. The Federal Motor Carrier Safety Regulations (FMCSRs)
require one of the following warning devices to be deployed when a CMV
is stopped upon the traveled portion of a highway or the shoulder of a
highway for any cause other than necessary traffic stops: three
bidirectional emergency reflective triangles; at least 6 fusees or at
least 3 liquid-burning flares. The vehicle must have as many additional
fusees or liquid-burning flares as are necessary to satisfy the
regulatory requirements. Other warning devices may be used in addition
to, but not in lieu of, the required warning devices, provided they do
not decrease the effectiveness of the required devices. The Agency has
determined that granting the exemption would likely achieve a level of
safety equivalent to or greater than the level of safety provided by
the FMCSRs.
DATES: This exemption is effective June 27, 2023 and ending June 27,
2028.
FOR FURTHER INFORMATION CONTACT: Jos[eacute] R. Cestero, Vehicle and
Roadside Operations Division, Office of Carrier, Driver, and Vehicle
Safety, MC-PSV, Federal Motor Carrier Safety Administration, 1200 New
Jersey Avenue SE, Washington, DC 20590-0001; (202) 366-5541;
<a href="/cdn-cgi/l/email-protection#076d68746229646274736275684763687329606871"><span class="__cf_email__" data-cfemail="1a7075697f34797f696e7f68755a7e756e347d756c">[email protected]</span></a>.
Docket: For access to the docket to read background documents or
comments submitted in response to the notice requesting public comments
on the exemption application, go to <a href="http://www.regulations.gov">www.regulations.gov</a> at any time or
visit Room W12-140 on the ground level of the West Building, 1200 New
Jersey Avenue SE, Washington, DC, between 9 a.m. and 5 p.m., ET, Monday
through Friday, except Federal holidays. To be sure someone is there to
help you, please call (202) 366-9317 or (202) 366-9826 before visiting
Docket Operations. The on-line Federal document management system at
the beginning of this notice.
I. Background
FMCSA has authority under 49 U.S.C. 31136(e) and 31315(b) to grant
exemptions from certain parts of the FMCSRs. FMCSA must publish a
notice of each exemption request in the Federal Register (49 CFR
381.315(a)). The Agency must provide the public an opportunity to
inspect the information relevant to the application, including any
safety analyses that have been conducted. The Agency must also provide
an opportunity for public comment on the request.
The Agency reviews safety analyses and public comments submitted
and determines whether granting the exemption would likely achieve a
level of safety equivalent to, or greater than, the level that would be
achieved by compliance with the current regulation (49 CFR 381.305).
The decision of the Agency must be published in the Federal Register
(49 CFR 381.315(b)) with the reasons for denying or granting the
application and, if granted, the name of the person or class of persons
receiving the exemption, and the regulatory provision from which the
exemption is granted. The notice must also specify the effective period
(up to 5 years) and explain the terms and conditions of the exemption.
The exemption may be renewed (49 CFR 381.300(b)).
II. Pi Variable's Application for Exemption
Pi Variables applied for an exemption from 49 CFR 393.95(f) to
deploy LED flares in place of bidirectional emergency reflective
triangles, fusees or liquid-burning flares when CMVs are stopped upon
the traveled portion of a highway or the shoulder of a highway for any
cause other than necessary traffic stops. Pi Variables stated that LED
flares provide an advantage over liquid-burning flares and fusee flares
as the latter can create a significant fire hazard, pollute water
runoff, generate
[[Page 40921]]
health hazards related to inhalation of fumes, and cannot be used in
the setting of a spill of flammable material. A copy of the application
is included in the docket referenced at the beginning of this notice.
Section 393.95(f) of the FMCSRs requires warning devices be
deployed when a CMV is stopped upon the traveled portion of a highway
or the shoulder of a highway for any cause other than necessary traffic
stops. The regulation requires the use of either three bidirectional
emergency reflective triangles that conform to the requirements of
FMVSS No. 125, or at least 6 fusees or 3 liquid-burning flares while
the vehicle is stopped. The vehicle must also have as many additional
fusees or liquid-burning flares as are necessary to satisfy the
requirements of Sec. 392.22, which specifies how the hazard warnings
are to be displayed while stopped. Section 393.95 also permits the use
of other warning devices in addition to, but not in lieu of, the
required warning devices, provided those warning devices do not
decrease the effectiveness of the required warning devices.
The LED flares are comprised of a series of wirelessly
interconnected individual LED warning devices. Each warning device is
illuminated by an array of LEDs which, combined with other warning
devices, provide four different options to adjust the flash pattern:
two sequential, one simultaneous, and one with steady burn. Pi
Variables notes that every LED flare can support 50,000 lbs. of load
while also meeting the IP 67 code \1\ for ingress protection against
water and dust. A carrying case and two different options to power the
LED flares are provided: lithium-ion rechargeable batteries or AA
alkaline batteries.
---------------------------------------------------------------------------
\1\ International Electrotechnical Commission (IEC), Ingress
Protection (IP) Rating Guide <a href="https://www.iec.ch/ip-ratings">https://www.iec.ch/ip-ratings</a>.
---------------------------------------------------------------------------
In its petition, Pi Variables stated that the benefits of deploying
LED flares include the prevention of fire danger, pollution, and health
conditions. Pi Variables stated that this alternative would maintain a
level of safety that is equivalent to, or greater than, the level of
safety achieved without the exemption.
III. Summary of Comments
On February 18, 2022, FMCSA published a notice in the Federal
Register (87 FR 9419) requesting public comment on Pi Variables'
application for exemption. The Agency received comments from one
individual who generally opposed granting the application and four
comments in support of the application subject to conditions.
One commenter generally discouraged the use of LED flares,
expressing concerns about longevity and battery life. The remaining
four comments in favor recommended the use of LED flares due to
environmental impact, health and fire danger concerns from fusses and
liquid burning flares.
IV. FMCSA Decision Granting Exemption
A. Equivalent Level of Safety Analysis
FMCSA has evaluated the Pi Variables exemption application and the
comments received. For the reasons discussed below, FMCSA believes that
granting the exemption to allow LED flares to be deployed as an
alternative to the bidirectional emergency reflective triangles,
fusees, and liquid burning flares required by the FMCSRs is likely to
achieve a level of safety equivalent to or greater than the level of
safety provided by the regulation.
In 1999, the Texas Transportation Institute (TTI) published a
report titled ``Work Zone Lane Closure Warning Light System.'' \2\
Researchers investigated motorists' understanding of various designs of
LED flares and their perceived usefulness in a simulated work zone at
night. The research was conducted at TTI's proving ground facility at
the Texas A&M University Riverside Campus. The LED flares used for the
study were wired lights that flash in a sequence to delineate the taper
on work zones. The proving ground study simulated a nighttime work zone
with a left lane closure, tangent, flashing arrow panel, and prototype
warning light system. The focus of the research was to study the effect
of flashing LED flares and approach speeds upon motorists' reaction to,
and possible preference for, the LED flares. Field studies of the LED
flares were also performed at night to determine if the system would
yield significant operational or safety benefits in actual work zone
applications.
---------------------------------------------------------------------------
\2\ Finley, M.D., G.L. Dudek. Work Zone Lane Closure Warning
Light System. Draft Report 3983-1. Texas Transportation Institute,
College Station Texas, September 1999. Available at time of
publication at <a href="https://static.tti.tamu.edu/tti.tamu.edu/documents/3983-1.pdf">https://static.tti.tamu.edu/tti.tamu.edu/documents/3983-1.pdf</a>.
---------------------------------------------------------------------------
Results from the proving ground and field studies showed that the
flashing LED flares used in the work-zone lane closure were perceived
positively and were not confusing to the motoring public. The field-
study also found that the prototype LED flares encouraged motorists to
vacate a closed travel lane farther upstream from the work zone.
Accordingly, Pi Variables' LED flares may provide similar safety
benefits alerting drivers to a stopped vehicle while encouraging them
to vacate the lane and navigate around the stopped vehicle.
In 2011, the University of Missouri with the support of the Federal
Highway Administration's Smart Work Zone Deployment Initiative Program
conducted a study \3\ to investigate the effectiveness of flashing LED
flares on work zones during nighttime. The Sequential LED flares used
for the study were wireless lights that flash in a sequence to
delineate the taper on work zones. The effectiveness of sequential
lights was investigated using controlled field studies. Traffic
parameters were collected at the same field site with and without the
deployment of sequential lights. Three surrogate performance measures
were used to determine the impact of sequential lights on safety. These
measures were the speeds of approaching vehicles, the number of late
taper merges and the locations where vehicles merged into open lane
from the closed lane. The result of this study indicates that
sequential LED flares, like those designed by Pi Variables, had a net
positive effect in reducing the speeds of approaching vehicles,
enhancing driver compliance, and preventing passenger cars, trucks and
vehicles at rural work zones from late taper merges.
---------------------------------------------------------------------------
\3\ Sun, C., P. Edara, Y. Hou, and A. Robertson. Final Report:
Cost-Benefit Analysis of Sequential Warning Lights in Nighttime Work
Zone Tapers. University of Missouri, Columbia, MO. June 2011.
---------------------------------------------------------------------------
With respect to longevity of LED flares under normal use, the
Agency notes that Pi Variables reported that its LED flares have a life
span of more than five years and include IP certification and crush
strength. The IP certification is a rating system, defined by IEC/EN
60529,\4\ of a product's ability to withstand liquid and dust
intrusion. Pi Variables also subjects its LED flares to a crush
strength test to establish the compressive force or crush resistance of
the enclosure material.
---------------------------------------------------------------------------
\4\ International Electrotechnical Commission (IEC) 60529,
Degrees of protection provided by enclosures (IP Code),Edition 2.2
published on August 29, 2013, <a href="https://webstore.iec.ch/preview/info_iec60529%7Bed2.2%7Db.pdf">https://webstore.iec.ch/preview/info_iec60529%7Bed2.2%7Db.pdf</a>
---------------------------------------------------------------------------
Additional advantages of LED flares over the regulatorily required
emergency equipment include: (1) activation when removed from their
storage case (a useful safety feature at the time a driver exits the
vehicle to deploy the LED flares during the night); (2) run-time for
LED flares of more than 20 hours, while flares can burn for about
twenty minutes; (3) the compact design
[[Page 40922]]
and weight of LED flares that provide stability to the devices during
windy conditions; and (4) the safe use of LED flares near chemical or
fuel spills.
A few commentors expressed concern about the potential for self-
discharge of the batteries in the LED flares while they are stored
without use in the truck. We note that the FMCSRs control for proper
function of LED flares. Emergency equipment is an inspection item under
Sec. 396.11 as required by the FMCSR's. As such, if the LED flares are
not functioning properly due to self-discharge during storage, the
driver must complete a driver vehicle inspection report at the
completion of the workday, and the motor carrier must ensure that the
defect is corrected prior to vehicle re-dispatch.
For these reasons, the Agency believes that granting the use of LED
flares as an alternative to emergency equipment currently specified in
49 CFR 393.95(f) will likely provide a level of safety that is
equivalent to, or greater than, the level of safety achieved without
the exemption. When compared to the bidirectional emergency reflective
triangles, fusees, or liquid-burning flares, the Pi Variables LED
flares provide drivers with an equivalent visual alert that (1)
encourages vehicles to reduce speed near stopped CMVs, (2) directs
vehicles to merge into another lane when lanes are closed, and (3) is
not confusing for the motoring public. Additionally, Pi Variables' LED
flares are safer for use where roadside fire hazards are present.
V. Terms and Conditions
Exemption Period
The Agency hereby grants Pi Variables an exemption for a 5-year
period, beginning June 27, 2023 and ending June 27, 2028 unless
rescinded earlier by FMCSA.
A. Conditions of Exemption
1. This exemption is limited to Pi Variables' Pi-Lit LED flares and
does not apply to any other LED flare system/technology.
2. During the exemption period, motor carriers operating CMVs may
use Pi-Lit LED flares in orange or red LED color in lieu of the
bidirectional emergency reflective triangles, fusees, and liquid-
burning flares specified in Sec. 393.95(f).
3. Motor carriers deploying Pi-Lit LED flares under this exemption
must deploy at least 3 flares within the time period and in the manner
specified for deployment in 49 CFR 392.22.
4. The Pi-Lit LED flares must conform to the performance
requirements specified in Underwriters Laboratories, Inc., UL No. 912,
Highway Emergency Signals, Sixth Edition, May 11, 2018 for resistance
to rain, wind, and dust, and minimum illuminance.
5. Interested parties possessing information that would demonstrate
that motor carriers utilizing Pi-Lit LED flares are not achieving the
requisite statutory level of safety should immediately notify FMCSA by
email at <a href="/cdn-cgi/l/email-protection#91dcd2c1c2d5d1d5dec5bfd6dec7"><span class="__cf_email__" data-cfemail="317c7261627571757e651f767e67">[email protected]</span></a>. The Agency will evaluate any such information
and if safety is being compromised or if the continuation of the
exemption is not consistent with 49 U.S.C. 31136(e) and 31315(b), will
take immediate steps to revoke the exemption.
B. Preemption
In accordance with 49 U.S.C. 31313(d), as implemented by 49 CFR
381.600, during the period this exemption is in effect, no State shall
enforce any law or regulation applicable to interstate commerce that
conflicts with or is inconsistent with this exemption with respect to a
firm or person operating under the exemption. States may, but are not
required to, adopt the same exemption with respect to operations in
intrastate commerce.
C. Termination
FMCSA does not believe that motor carriers, drivers, and CMVs
covered by the exemption will experience any deterioration of their
safety record. However, should this occur, FMCSA will take all steps
necessary to protect the public interest, including revocation of the
exemption without prior notice. The exemption will be rescinded if: (1)
motor carriers and/or CMVs fail to comply with the terms and conditions
of the exemption; (2) the exemption has resulted in a lower level of
safety than maintained before it was granted; or (3) continuation of
the exemption would not be consistent with the goals and objectives of
49 U.S.C. 31136(e) or 31315(b).
Robin Hutcheson,
Administrator.
[FR Doc. 2023-13205 Filed 6-21-23; 8:45 am]
BILLING CODE 4910-EX-P
</pre><script data-cfasync="false" src="/cdn-cgi/scripts/5c5dd728/cloudflare-static/email-decode.min.js"></script></body>
</html>Indexed from Federal Register on June 22, 2023.
This is legal information, not legal advice. Laws vary by jurisdiction and change frequently. Always verify current law with official sources and consult a licensed attorney in your jurisdiction for advice on your specific situation.