Airworthiness Directives; Bell Textron Canada Limited Helicopters
Primary source
Metadata and text below are from the Federal Register, a public-domain U.S. government work. Always verify the official published version before relying on it for any legal matter.
Issuing agencies
Abstract
The FAA is adopting a new airworthiness directive (AD) for all Bell Textron Canada Limited Model 206A, 206A-1 (OH-58A), 206B, 206B-1, 206L, 206L-1, 206L-3, and 206L-4 helicopters. This AD was prompted by a loss of tail rotor (TR) drive due to a failure of an adhesively bonded joint between an adapter and a tube on one of the segmented TR drive shaft (TRDS) assemblies. This AD requires determining if an affected TRDS is installed; repetitively inspecting the bond line for damage; repetitively performing a proof load test of the TRDS assembly; and depending on the results of the inspections or the proof load tests, removing an affected TRDS from service and replacing it with a serviceable TRDS. This AD also prohibits installing a TRDS unless it meets certain requirements, as specified in a Transport Canada AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
This is legal information, not legal advice. Laws vary by jurisdiction and change frequently. Always verify current law with official sources and consult a licensed attorney in your jurisdiction for advice on your specific situation.