Rule2023-03927
Implementation of Additional Sanctions Against Russia and Belarus Under the Export Administration Regulations (EAR) and Refinements to Existing Controls
Primary source
Metadata and text below are from the Federal Register, a public-domain U.S. government work. Always verify the official published version before relying on it for any legal matter.
Published
February 27, 2023
Effective
February 24, 2023
Issuing agencies
Commerce DepartmentIndustry and Security Bureau
Abstract
In response to the Russian Federation's (Russia's) ongoing aggression against Ukraine, as substantially enabled by Belarus, the Department of Commerce is expanding and strengthening the existing sanctions against Russia and Belarus, including the scope of the Export Administration Regulations (EAR)'s Russian and Belarusian industry sector sanctions and `luxury goods' sanctions. This rule also refines existing export controls on Russia and Belarus. The Department of Commerce is taking these actions to enhance the effectiveness of its controls on both countries and to better align them with those implemented by U.S. allies and partners.
Full Text
<html>
<head>
<title>Federal Register, Volume 88 Issue 38 (Monday, February 27, 2023)</title>
</head>
<body><pre>
[Federal Register Volume 88, Number 38 (Monday, February 27, 2023)]
[Rules and Regulations]
[Pages 12175-12205]
From the Federal Register Online via the Government Publishing Office [<a href="http://www.gpo.gov">www.gpo.gov</a>]
[FR Doc No: 2023-03927]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
Bureau of Industry and Security
15 CFR Parts 744 and 746
[Docket No. 230221-0047]
RIN 0694-AJ09
Implementation of Additional Sanctions Against Russia and Belarus
Under the Export Administration Regulations (EAR) and Refinements to
Existing Controls
AGENCY: Bureau of Industry and Security, Department of Commerce.
ACTION: Final rule.
-----------------------------------------------------------------------
SUMMARY: In response to the Russian Federation's (Russia's) ongoing
aggression against Ukraine, as substantially enabled by Belarus, the
Department of Commerce is expanding and strengthening the existing
sanctions against Russia and Belarus, including the scope of the Export
Administration Regulations (EAR)'s Russian and Belarusian industry
sector sanctions and `luxury goods' sanctions. This rule also refines
existing export controls on Russia and Belarus. The Department of
Commerce is taking these actions to enhance the effectiveness of its
controls on both countries and to better align them with those
implemented by U.S. allies and partners.
DATES: This rule is effective on February 24, 2023.
FOR FURTHER INFORMATION CONTACT: For general questions on this final
rule, contact Eileen Albanese, Director, Office of National Security
and Technology Transfer Controls, Bureau of Industry and Security,
Department of Commerce, Phone: (202) 482-0092, Fax: (202) 482-482-3355,
Email: <a href="/cdn-cgi/l/email-protection#5f2d2f3b6d1f3d362c713b303c71383029"><span class="__cf_email__" data-cfemail="7a080a1e483a181309541e1519541d150c">[email protected]</span></a>. For emails, include ``Russia and Belarus
February 2023 sanctions'' in the subject line.
SUPPLEMENTARY INFORMATION:
I. Background
In response to Russia's February 2022 further invasion of Ukraine,
BIS imposed extensive sanctions on Russia under the Export
Administration Regulations (15 CFR parts 730-774) (EAR) as part of the
final rule Implementation of Sanctions Against Russia Under the Export
Administration Regulations (EAR) (the Russia Sanctions Rule), effective
on February 24, 2022, and published on March 3, 2022 (87 FR 12226).
Effective March 2, 2022, BIS also imposed similar sanctions on Belarus
under the EAR in a final rule, Implementation of Sanctions Against
Belarus (``Belarus Sanctions Rule''), published on March 8, 2022 (87 FR
13048). Since the publication of the Russia Sanctions Rule and the
Belarus Sanctions Rule, BIS has published several other final rules
imposing stringent export controls on Russia and Belarus. These actions
reflect the U.S. Government's position that Russia's invasion of
Ukraine, and Belarus's complicity in the invasion, flagrantly violated
international law, are contrary to U.S. national security and foreign
policy interests, and undermine global order, peace, and security.
The export control measures in this final rule build upon the
policy objectives set forth in the earlier rules referenced above. The
adoption of these measures, undertaken in part to better align U.S.
controls with stringent measures implemented by partner and ally
countries, will enhance the effectiveness of the multilateral sanctions
on Russia by further limiting access to items that enable Russia's
military capabilities and sources of revenue that could support those
capabilities. Additionally, the new or expanded controls specified in
this rule target Belarus as part of the U.S. response to the country's
complicity in Russia's aggression.
II. Overview of New Controls
This rule revises the EAR to enhance and strengthen the existing
sanctions against Russia and Belarus by expanding the scope of the
Russian and Belarusian industry sector sanctions and the `luxury goods'
sanctions to better align them with the controls that have been
implemented by U.S. allies and partners imposing substantially similar
controls on Russia and Belarus. For similar policy reasons, this rule
also refines other existing controls on Russia and Belarus that were
imposed in response to the February 2022 further invasion of Ukraine.
III. Amendments to the Export Administration Regulations (EAR)
This rule enhances and strengthens the sanctions that have been
implemented on Russia and Belarus under the EAR, as described under
Sections A and B below. The regulatory revisions described under
Section A. Imposition of new export controls on Russia and Belarus,
including to align the EAR's controls with those imposed by U.S. allies
and partners, include:
<bullet> Revisions to the sanctions under supplement no. 2 to part
746 to make conforming changes with other supplements (supplements nos.
4 and 6 to part 746) used under the Russian and Belarusian Industry
Sector Sanctions to provide alignment with sanctions imposed by U.S.
partners and allies, and make the EAR sanctions stronger, more
effective, and easier to understand;
<bullet> Expansion of Russian Industry Sector Sanctions under
supplement no. 4 to part 746 by adding additional items to align the
sanctions with sanctions imposed by U.S. partners and allies and by
making other changes to render the EAR's sanctions stronger, more
effective, and easier to understand;
<bullet> Expansion of Russian Industry Sector Sanctions under
supplement no. 6 to part 746 by adding additional items to align them
with sanctions imposed by U.S. partners and allies and by making other
changes to render the EAR's sanctions stronger, more effective, and
easier to understand;
<bullet> Expansion of `Luxury Goods' Sanctions by adding additional
items to supplement no. 5 to part 746 to align them with sanctions
imposed by U.S. allies and partners; and
<bullet> Alignment changes to supplement no. 3 to part 746 of the
EAR (Countries Excluded from Certain License Requirements of Sec. Sec.
746.7 and 746.8) to add Taiwan.
The remaining changes are described under Section B. Corrections
and clarifications to existing controls on Russian and Belarus. The
changes described under Section B include:
<bullet> Clarification that Sec. 744.7 extends to transfers (in-
country), in addition to exports and reexports;
<bullet> Clarification that the exclusion for items controlled
under ECCN 5A992 or 5D992 under Sec. 746.8 also applies to `Luxury
Goods Sanctions' license requirements under Sec. 746.10(a)(1); and
<bullet> Conforming changes to the licensing policies under
Sec. Sec. 746.5, 746.8, and 746.10 and addition of a case-by-case
license review policy for applications for the disposition of items
needed as part of companies curtailing or closing all operations in
Russia or Belarus.
A. Imposition of New Export Controls on Russia and Belarus, Including
Changes To Align Controls With Those Imposed by U.S. Allies and
Partners
This rule expands the scope of the Russian Industry Sector
Sanctions by adding additional items to supplement no. 4 to part 746
that will require a license under Sec. 746.5(a)(1)(ii), as
[[Page 12176]]
described further below. This rule also expands the scope of the
``Luxury Goods'' Sanctions by adding additional items to supplement no.
5 to part 746 that will require a license under Sec. 746.10, as
described further below.
1. Revisions to the Heading and Contents of Supplement No. 2 to Part
746 so That It Conforms With Other Supplements That Relate to the
Russian and Belarusian Industry Sector Sanctions, Thereby Providing
Alignment With Controls Imposed by U.S. Partners and Allies and Also
Make the EAR's Controls Stronger, More Effective, and Easier To
Understand
a. Clarifying changes to the heading of supplement no. 2 to part
746.
In supplement no. 2 to part 746--Russian Industry Sector Sanctions,
this rule makes a clarifying change by revising the section heading to
add Belarus and a reference to Sec. 746.5(a)(1)(i). These two changes
are made to conform this supplement's heading with the same heading
structure used in the other two supplements used to identify items that
require a license under the Russian and Belarusian Industry Sector
Sanctions, i.e., supplements nos. 4 and 6. These two clarifying changes
are intended to make it easier for exporters, reexporters, and
transferors to understand the scope of supplement no. 2 to part 746 and
to create greater consistency in the three supplement headings used to
identify items that require a license if destined for Russian and
Belarusian industry sectors.
b. Changing the methodology for identifying items by using the HTS-
6 Code and HTS Description to make it easier to align with U.S. allies'
and partners' controls.
In supplement no. 2 to part 746, this rule revises the table to
remove the columns for `Schedule B' and `Schedule B description' and
adds in their place columns to identify the same set of items but by
using the Harmonized Tariff Schedule (HTS)-6 Code and HTS Description.
With these changes in the methodology used to identify items, the
supplement will now utilize HTS-6 Codes and HTS Descriptions, instead
of the applicable Schedule B number and Schedule B Description. This
change aligns the underlying controls with those of U.S. allies and
partners who are generally using the HS-6 Codes and HS Descriptions,
which are equivalent to the HTS-6 Codes and HTS Descriptions used under
the U.S. Harmonized Tariff Schedule. Because the HS-6 Codes and HS
Descriptions are recognized and used internationally, it will make it
easier to align the EAR controls with those of U.S. allies and
partners.
c. Conforming changes to supplement no. 2 to part 746 introductory
text to reflect the use of the HTS-6 Codes and HTS Descriptions and to
better align this supplement with supplement no. 4 to part 746
introductory text.
This rule makes a conforming change that revises the introductory
text of supplement no. 2 to part 746 to remove references to the
Schedule B numbers and Schedule B descriptions and adds in their place
references to the applicable HTS-6 codes and HTS descriptions, as well
as specifying that the source for the HTS-6 codes and descriptions in
this list comes from the United States International Trade Commission
(USITC's) Harmonized Tariff Schedule of the United States (2023). The
revised introductory text to supplement no. 2 is modeled after the same
type of description text as used in supplement no. 4 to part 746 and is
similarly intended to make it easier for exporters, reexporters, and
transferors to understand and comply with the EAR's Russian and
Belarusian industry sector sanctions as a whole. The rule also revises
the sentence in the introductory text by removing references to three
Schedule B numbers that were listed in both supplements nos. 2 and 4
prior to this rule and identifying instead the applicable six HTS-6
codes: 841350, 841360, 842139, 843049, 843139, and 847989.
d. Expansion and clarification of supplement no. 2 to part 746 to
strengthen the controls by specifying that the supplement includes any
modified or designed ``parts,'' ``components,'' ``accessories,'' and
``attachments'' for the items identified in the table to better align
the supplement with supplement no. 4 to part 746.
Also in supplement no. 2 to part 746, this rule expands the scope
of the items that are subject to the Russian and Belarusian Industry
Sector Sanctions by revising newly added paragraph (a) in the
introductory text to specify that the items captured include any
modified or designed ``components,'' ``parts,'' ``accessories,'' and
``attachments'' therefor, regardless of their HTS Code or HTS
Description.'' In many cases these ``components,'' ``parts,''
``accessories,'' and ``attachments'' are not specifically identified by
HTS Code or HTS Description. Paragraph (a) also specifies that the
expansion does not include any ``part'' or minor ``component'' that is
a fastener (e.g., screw, bolt, nut, nut plate, stud, insert, clip,
rivet, pin), washer, spacer, insulator, grommet, bushing, spring, wire,
or solder. By expanding the scope of the items set forth in the
supplement in this manner, this revision aligns this aspect of
supplement no. 2 with supplement no. 4, which also already included the
same text for ``components,'' ``parts,'' ``accessories,'' and
``attachments,'' and generally promotes and enhances the strength and
effectiveness of the sanctions set forth in this supplement.
e. Clarifications to supplement no. 2 to part 746 introductory text
to specify that the scope of the license requirement applies to an
item's HTS-6 Code and describe how such information relates to other
information in the supplement's table, as well as to content describing
other HTS Codes that are longer but still derived from HTS-6 Codes.
This rule adds a new paragraph (b) to specify that the items
identified in the HTS-6 Code column of supplement no. 2 to part 746 are
the items that are subject to the license requirement under Sec.
746.5(a)(1)(i). This rule adds one sentence to paragraph (b) to clarify
that that HTS Description is included as a column heading under the
table to assist exporters with their Automated Export System (AES)
filing responsibilities and to have a better idea of the types of items
that fall under specific HTS-6 Codes. This rule also adds a sentence to
specify that the HTS-6 Code governs in determining the license
requirement. For example, if an exporter ``knows'' their item is
classified under an HTS-6 Code in supplement no. 2 to part 746, but
does not believe that their item matches the corresponding HTS
Description in supplement no. 2 to part 746, the HTS-6 Code will
control for determining the license requirement under Sec.
746.5(a)(1)(i). Likewise, if someone believes their item could
potentially meet the description of more than one HTS Description, the
HTS-6 Code will control. As noted above, the HTS Description is
intended to assist exporters with their AES filing responsibilities but
does not govern whether an item is identified under supplement no. 2 to
part 746. Lastly, this rule adds a sentence to new paragraph (b) to
clarify that the license requirements extend to HTS Codes at the 8 and
10 digit level when those HTS-8 and HTS-10 codes begin with the HTS-6
Codes as their first 6 numbers. This text is intended to prevent an
exporter from identifying an item at the 8 or 10 digit level as a way
to try to evade these controls. If the 8 or 10 digit code for the item
begins with one of the HTS-6 Codes (that is, matches the first six
numbers of the latter) that are specified in the table, the item will
require a license under Sec. 746.5(a)(1)(i).
[[Page 12177]]
BIS estimates these changes to supplement no. 2 to part 746 will
result in an additional two license applications submitted to BIS
annually.
2. Expansion of Russian and Belarusian Industry Sector Sanctions Under
Supplement No. 4 to Part 746 To Add Additional Items To Align With
Controls Imposed by U.S. Partners and Allies and Make Other Changes To
Render the EAR's Controls Stronger, More Effective, and Easier To
Understand
a. Expansion of the controls by adding 322 HTS-6 Codes to
supplement no. 4 to part 746.
In supplement no. 4 to part 746--Russian and Belarusian Industry
Sector Sanctions pursuant to Sec. 746.5(a)(1)(ii), this rule expands
the scope of the Russian and Belarusian Industry Sector Sanctions by
adding 322 additional HTS-6 Code entries corresponding to 322
industrial items that will require a license for export or reexport to
or transfer within Russia or Belarus under Sec. 746.5(a)(1)(ii). The
restrictions on these additional industrial items are intended to
further undermine the Russian and Belarusian industrial bases and their
ability to continue to support the Russian invasion of and subsequent
military aggression in Ukraine. The items added include a variety of
electronics, industrial machinery, and equipment. The complete list of
322 new HTS-6 Codes this rule adds to supplement no. 4 are as follows:
720810, 720825, 720826, 720827, 720836, 720837, 720838, 720839, 720840,
720851, 720852, 720853, 720854, 720890, 720915, 720916, 720917, 720918,
720925, 720926, 720927, 720928, 720990, 721011, 721012, 721020, 721030,
721041, 721049, 721050, 721061, 721069, 721070, 721119, 721123, 721190,
721220, 721230, 721240, 721250, 721911, 721912, 721913, 721914, 721921,
721922, 721923, 721924, 721931, 721932, 721933, 721934, 721935, 721990,
722011, 722012, 722020, 722090, 722511, 722540, 722550, 722591, 722592,
722611, 722619, 722620, 722692, 722699, 730810, 730820, 730830, 730840,
730890, 731021, 731029, 761010, 761090, 761210, 840410, 840420, 840490,
840510, 840681, 840682, 840721, 840729, 840810, 840820, 840890, 840999,
841090, 841111, 841112, 841121, 841122, 841191, 841311, 841319, 841330,
841350, 841360, 841381, 841410, 841610, 841620, 841630, 841690, 841720,
841919, 841950, 841960, 841990, 842111, 842611, 842619, 842620, 842630,
842641, 842649, 842691, 842710, 842790, 842831, 842870, 842911, 842920,
842930, 842940, 842951, 842952, 843049, 843120, 843139, 843141, 844319,
845420, 845490, 845522, 845530, 845620, 845640, 845710, 845730, 845811,
845819, 845891, 845899, 845921, 845931, 845941, 845961, 846012, 846019,
846022, 846023, 846024, 846029, 846031, 846039, 846040, 846222, 846223,
846224, 846225, 846226, 846229, 846232, 846233, 846239, 846242, 846249,
846251, 846259, 846261, 846262, 846263, 846269, 846290, 846310, 846320,
846330, 846390, 846410, 846420, 846490, 846691, 846693, 846694, 846810,
846820, 846880, 847330, 847431, 847730, 847981, 847982, 848130, 848250,
848310, 848320, 848330, 848340, 848350, 848360, 848390, 848520, 848530,
848590, 848610, 848620, 848630, 848640, 848710, 850153, 850211, 850212,
850300, 850511, 850590, 850710, 850720, 851110, 851120, 851130, 851140,
851150, 851180, 851190, 851220, 851290, 851411, 851419, 851420, 851490,
851511, 851519, 851521, 851529, 851680, 851771, 851779, 852351, 852581,
852582, 852583, 852589, 852610, 852721, 852849, 852910, 853080, 853221,
853224, 853229, 853230, 853290, 853400, 853510, 853521, 853650, 853690,
853810, 853929, 853951, 853952, 854121, 854129, 854130, 854141, 854142,
854143, 854149, 854320, 854330, 854411, 854430, 854449, 854470, 854520,
854710, 854800, 854911, 854912, 854913, 854914, 854919, 854921, 854929,
854931, 854939, 854991, 854999, 870310, 870423, 870510, 870540, 871690,
900110, 900510, 900580, 900590, 901380, 901410, 901420, 901480, 901490,
901510, 901520, 902480, 902519, 902590, 902710, 902781, 902789, 902920,
902990, 903032, 903039, 903040, 903082, and 903089.
b. Removal of Schedule B and Schedule B Description columns under
supplement no. 4 to part 746 to make it easier to understand the
supplement's scope and to align the controls with those imposed by U.S.
allies and partners.
Also in supplement no. 4 to part 746, this rule revises the table
to remove the columns for Schedule B and Schedule B Description while
retaining the existing HTS Code and HTS Description columns. With these
changes, the supplement will now utilize HTS-6 Code and the HTS
Description, instead of the Schedule B and Schedule B Description. This
change aligns the underlying controls with those of U.S. allies and
partners who generally use HS-6 Codes and HS Descriptions, which are
equivalent to the HTS-6 Codes and HTS Descriptions used under the U.S.
Harmonized Tariff Schedule. Because the HS-6 Codes and HS Descriptions
are recognized and used internationally, these changes will make it
easier to align these EAR controls with those of U.S. allies and
partners.
c. Revision to the column used to identify the license requirement
under supplement no. 4 to part 746 to use the HTS-6 Code column instead
of the HTS Description column.
Prior to this rule, the supplement no. 4 to part 746 introductory
text specified that the HTS Description column is determinative in
identifying the items that require a license under Sec.
746.5(a)(1)(ii). BIS determined that in making changes to align the
EAR's controls in this supplement with those imposed by U.S. allies and
partners, it would be preferable from a consistency and precision
perspective to make the HTS-6 Code, as opposed to the HTS Description,
be the determinative factor in assessing licensing obligations under
Sec. 746.5(a)(1)(ii). While using the HTS-6 Code instead of the HTS
Description may result in some additional items being subject to the
license requirements under Sec. 746.5(a)(1)(ii), as a general matter,
using the HTS-6 column will make it easier for exporters, reexporters,
and transferors to understand and comply with these controls. This
revision may also facilitate the licensing of these items by BIS. The
use of the HTS-6 Code to identify the items subject to the license
requirement under Sec. 746.5(a)(1)(ii) will also help to improve the
effectiveness of enforcement-related activities because it will be
easier for BIS and other U.S. Government enforcement officials to
identify items that require a license under supplement no. 4 to part
746 due to the fact that if there is a match between an HTS-6 Code in
the Electronic Export Information (EEI) data filed in the Automated
Export System (AES) and an HTS-6 Code identified under supplement no. 4
to part 746, a license will be required for the export of the item at
issue.
d. Clarifications to the supplement no. 4 to part 746 introductory
text to specify how the HTS-6 Codes relate to other information in the
table, as well as to content referring to other HTS Codes that are
longer but derived from HTS-6 Codes.
Similar to the clarifications described above to the supplement no.
2 to part 746 introductory text, this rule revises paragraph (b) under
the supplement no. 4 to part 746 introductory text to clarify
[[Page 12178]]
that that HTS Description is included as a column heading under the
table to assist exporters with their AES filing responsibilities, as
well as to provide them with clarity regarding the types of items that
fall under specific HTS-6 Codes. This rule also adds a sentence to
specify that the HTS-6 Code governs in determining the license
requirement. As with the example provided above for supplement no. 2 to
part 746 where an exporter believes more than one HTS Description may
apply to their item, the HTS-6 Code governs the license requirements
for the items set forth in supplement no. 4 to part 746. Lastly, this
rule adds a sentence to new paragraph (b) to clarify that the license
requirements extend to HTS Codes at the 8 and 10 digit level when those
HTS-8 and HTS-10 codes begin with the HTS-6 Codes as their first 6
numbers. This text is intended to prevent an exporter from identifying
an item at the 8 or 10 digit level as a way to try to evade these
controls. If the 8 or 10 digit code begins with the six numbers of one
of the HTS-6 Codes in the table, it will require a license under Sec.
746.5(a)(1)(i).
BIS estimates these changes to supplement no. 4 to part 746 will
result in an additional 10 license applications submitted to BIS
annually.
3. Expansion of Russian and Belarusian Industry Sector Sanctions Under
Supplement No. 6 to Part 746 To Add Additional Items To Align With
Controls Imposed by U.S. Partners and Allies and Make Other Changes To
Render the Controls Stronger, More Effective, and Easier To Understand
In supplement no. 6 to part 746, this rule expands the list of
items that require a license under Sec. 746.5(a)(1)(iii) to better
align these Russian and Belarusian Russian Industry Sector Sanctions
with the U.S. allies' and partners' controls. This rule also makes
certain clarifying changes to facilitate understanding of the controls,
such as adding explanatory notes. Specifically, this rule makes the
following changes to supplement no. 6 to part 746:
a. Under paragraph (c), by expanding the scope of the paragraph to
add `thiafentanil' as an additional chemical to align with controls
imposed by U.S. allies and partners on the same chemical.
b. Under paragraph (e), this rule makes the following changes:
Under paragraph (e)(4) this rule clarifies the scope of items
controlled by adding the words ``isolated or purified' before the
references to nucleotides and oligonucleotides and by adding an `and'
between the terms nucleotides and oligonucleotides. This rule also
deletes the phrase `and reagents for oligonucleotide synthesis' and the
`or' at the end of the paragraph. These words are no longer needed
because of the greater specificity that has been added by the other
changes to this paragraph. Additionally, due to the addition of new
paragraphs (e)(6) and (7), the `or' is no longer needed between
paragraphs (e)(4) and (5).
Under paragraph (e)(5), this rule clarifies the scope of items
controlled by adding the words ``isolated or purified' before amino
acids, peptides, and proteins. This rule also adds an `and' between the
terms peptides and proteins and deletes the phrase `and resins and
reagents for peptide synthesis at the end of the paragraph. This
deletion is being made in light of the greater specificity that has
been added with the other changes to paragraph (e)(5).
This rule adds a new paragraph (e)(6) to control reagents and
materials for oligonucleotide synthesis, n.e.s. This rule also adds a
new paragraph (e)(7) to control resins, reagents, and materials for
peptide synthesis under the Russian and Belarusian Industry Sector
Sanctions set forth in Sec. 746.5(a)(1)(iii). These expansions are
made to align with the U.S. allies' and partners' controls on these
items and to further strengthen the EAR's controls.
c. Under paragraph (f), this rule makes the following changes:
Under paragraph (f)(1), this rule removes the term `fermenters'
because it is not needed for defining the scope of the control, as
fermenters are listed under paragraph (f)(12) of this rule. This change
is made to align this control with the controls imposed by the U.S.
allies and partners and to make it easier for exporters to understand
the scope of the control.
Under paragraph (f)(2), this rule removes the phrase `in which all
surfaces that come into direct contact with the chemicals being
processed are made from controlled materials' and in its place adds the
broader term `n.e.s.' This phrase was removed because the words
`controlled materials' was confusing from a compliance perspective.
Under paragraph (f)(3), this rule adds the term ``components'' to the
scope of the control and adds quotes around the terms ``parts'' and
``accessories'' to clarify that these terms are defined terms under the
EAR. This clarification addresses questions that BIS has received from
exporters regarding whether consumables are captured under paragraph
(f)(3). As described below, this rule adds a note to paragraph (f) to
specify that ``components, parts, and accessories'' include
consumables.
Under paragraph (f)(10), this rule expands the scope of the control
by adding `and microarrays' after well plates. This term is added to
better achieve the intended scope of the control and to strengthen it.
Under paragraph (f)(13), this rule clarifies the scope of the
paragraph by adding the term ``and ultracentrifuges'' and by adding
quotes around the EAR-defined terms ``components'' and ``accessories.''
Biological sample separation capabilities capture `ultracentrifuges' as
well as `centrifuges.' The addition of the term `ultracentrifuges' will
make the scope of the control parameter clearer.
Under paragraphs (f)(14) through (17), this rule expands their
scope by adding the defined EAR terms ``components,'' ``parts,'' and
``accessories.'' These terms are added to better achieve the intended
scope of these controls, to better align them with U.S. allies' and
partners' controls, and to strengthen the EAR's controls. In addition,
under paragraph (f)(16), this rule adds the term `and qPCR' to clarify
that these types of instruments are caught under the control parameter
in addition to Polymerase chain reaction (PCR) instruments. While
`qPCR' instruments already fell under the scope of the paragraph
(e)(16) control parameter, this added text will make it clearer and
better align with the U.S. allies' and partners' controls, which
reference the term `qPCR.'
Under paragraph (f)(18), this rule adds quotes around the EAR-
defined terms ``components,'' ``parts,'' and ``accessories'' and adds
the term ``n.e.s.' to clarify the scope of this control parameter.
Under paragraph (f)(19), this rule expands the scope of the
paragraph by adding the EAR-defined terms ``components,'' ``parts,''
and ``accessories.'' These terms are added to better achieve the
intended scope of these controls and strengthen them, as well as better
align them with U.S. allies' and partners' controls.
Under paragraph (f)(22), this rule removes the word `or' because it
is no longer needed with the addition of new paragraphs (f)(24) through
(27) described below.
Under paragraph (f)(23), this rule expands the scope of the
paragraph by adding the EAR-defined terms ``parts'' and
``accessories,'' as well as adding term `n.e.s.' These terms are added
to better achieve the intended scope of these controls and strengthen
them, as well as better align them with U.S. allies' and partners'
controls.
[[Page 12179]]
This rule adds a new paragraph (f)(24) to control ``microreactors,
n.e.s.'' This rule adds a new paragraph (f)(25) to control `solid and
liquid aerosol generating equipment, n.e.s.'; a new paragraph (f)(26)
to control `laboratory milling equipment, ``components,'' ``parts,''
and ``accessories,'' n.e.s.'; and a new paragraph (f)(27) to control
`peptide synthesizers, ``components,'' ``parts,'' and ``accessories.''
These expansions are made to align BIS's controls with the controls
that U.S. allies and partners have imposed on these items and to
strengthen them.
As mentioned above, this rule also adds a new Note 6 to paragraph
(f). The new note clarifies that consistent with the definitions in
part 772 of the EAR, ``components,'' ``parts,'' and ``accessories''
include consumables. The clarifications to paragraph (f), along with
the new Note 6 to paragraph (f), will clarify that consumables are
within the scope of the control parameters.
Lastly, under paragraph (f)(23), this rule revises Technical Note 1
to paragraph (f)(23) to specify that consistent with EU List X.B.X.001,
for purposes of paragraph (f)(23), `continuous flow reactors' consist
of plug and play systems. This revised technical note clarifies that
these are plug and play systems in which reactants are continuously fed
into the reactor and the resultant product is collected at the outlet.
BIS estimates these changes to supplement no. 2 to part 746 will
result in an additional 10 license applications submitted to BIS
annually.
4. Expansion of `Luxury Goods' Sanctions To Add Additional Items To
Supplement No. 5 to Part 746 To Align With U.S. Allies' and Partners'
`Luxury Goods' Controls and Strengthen the EAR's Controls
In supplement no. 5 to part 746--`Luxury Goods' Sanctions for
Russia and Belarus Pursuant to Sec. 746.10(a)(1) and (2), this rule
expands the scope of the `Luxury Goods' Sanctions by adding two hundred
and seventy-six additional entries that will require a license for
export or reexport to or transfers within Russia or Belarus and for
designated Russian and Belarusian oligarchs and malign actors worldwide
under Sec. 746.10(a)(1) and (2). The restrictions on these additional
items are intended to impose additional costs on Russians and
Belarusians supporting the Russian government's invasion of Ukraine.
The items this rule adds include a variety of `luxury goods.' The
addition of these items will strengthen BIS's controls under the EAR
and also align them with the controls imposed by U.S. allies and
partners on these items.
BIS estimates these changes to supplement no. 5 to part 746 will
result in an additional 15 license applications submitted to BIS
annually.
5. Alignment Changes To Supplement No. 3 to Part 746 of the EAR To Add
Taiwan
As noted above, in response to Russia's February 2022 invasion of
Ukraine and Belarus's s complicity in the invasion, BIS imposed
extensive export controls on Russia and Belarus under the EAR. However,
certain of the new licensing requirements pertaining to foreign-
produced items under Sec. 746.8 do not apply to countries that have
committed to implementing substantially similar export controls on
Russia and Belarus under their domestic laws. These countries are
listed in supplement no. 3. to part 746 of the EAR. Pursuant to Sec.
746.8(a)(5) of the EAR, countries that have made such a commitment
receive full or partial exclusions, as appropriate, from the Foreign
Direct Product rules' license requirements set forth under Sec.
746.8(a)(2) and (3), as well as under Sec. 746.7(a)(1)(iii), as a
result of a revision included in another rule published in today's
Federal Register that revised supplement no. 3 to part 746 as described
further below. Similarly, in the case of such ``excluded'' countries,
the license requirements in Sec. 746.8(a)(1) are not used to determine
U.S.-origin controlled content under the EAR's de minimis rules, as set
forth in supplement no. 2 to part 734 of the EAR, provided that the
criteria in Sec. 746.8(a)(5)(i) and (ii) are met.
Pursuant to the Russia Sanctions rule, 32 countries were added to
new supplement no. 3. In March 2022, BIS published a rule that added
South Korea to the list of countries,\1\ and in April 2022, it
published a rule that added Iceland, Liechtenstein, Norway, and
Switzerland to the list.\2\ Taiwan has implemented measures on Russia
and Belarus that are substantially similar to those imposed by BIS. In
this rule, in recognition of Taiwan's implementation of such measures,
BIS is adding Taiwan to supplement no. 3 to part 746 of the EAR with
the designation of ``full.''
---------------------------------------------------------------------------
\1\ 87 FR 13627 (Mar. 10, 2022).
\2\ 87 FR 21554 (Apr. 12, 2022).
---------------------------------------------------------------------------
Lastly, this rule makes a conforming change to the heading of
supplement no. 3 to part 746 to conform with a revision that is being
made by another final rule published in today's issue of the Federal
Register, Export Control Measures on Iran Under the Export
Administration Regulations (EAR) to Address Iranian Unmanned Aerial
Vehicles (UAV) and Their Use by Russia Against Ukraine, that is
revising the heading of supplement no. 3 to part 746.
B. Corrections and Clarifications to Existing Controls on Russian and
Belarus
BIS estimates the changes described in Section B of this final rule
will not result in the submission of any additional license
applications to BIS. Some of the clarifications this rule makes were
also described above under Section A where the clarifications and
expansions were being made to the same EAR section or supplement. The
corrections and clarifications under Section B do not include expansion
of the controls, which includes the clarifications to Sec. 744.7.
1. Clarification That Sec. 744.7 Also Extends to Transfers (In-
Country), in Addition to Exports and Reexports
In Sec. 744.7, this rule adds the term ``transfer (in-country)''
wherever the terms ``exports'' and ``reexports'' occur to clarify that
the license requirements of this section also apply to transfers (in-
country). BIS is making this clarification as part of this rule due to
the increased importance of this part 744 end-use control for imposing
license requirements for Russian and Belarusian aircraft and vessels.
In addition, BIS has received a number of questions recently from the
public on whether the controls extend to transfers (in-country). These
questioners have typically requested confirmation that their
understanding is correct that the Sec. 744.7 requirements included
transfers (in-country), indicating that there is not a misunderstanding
of this provision by the exporting community. However, to provide
further guidance to exporters and to help further strengthen
understanding and compliance with the Russia and Belarus sanctions
related to items being exported, reexported, transferred (in-country)
to such aircraft or vessels, this rule adds transfer (in-country) to
Sec. 744.7.
2. Clarification That the Exclusion for Items Controlled Under ECCN
5A992 or 5D992 Under Sec. 746.8 Also Applies to `Luxury Goods
Sanctions' License Requirements Under Sec. 746.10(a)(1)
In Sec. 746.10 (`Luxury goods' sanctions against Russia and
Belarus and Russian and Belarusian oligarchs and malign actors), this
rule adds introductory text to paragraph (a) to clarify that the same
exclusion for ECCNs 5A992 or 5D992 under Sec. 746.8(a) introductory
text also applies to the `luxury goods' sanctions
[[Page 12180]]
under Sec. 746.10(a)(1). This exclusion text is added to ensure that
the `luxury goods' license requirements under Sec. 746.10(a)(1) do not
undermine the scope of the ECCNs 5A992 and 5D992 exclusion under Sec.
746.8 because certain items under supplement no. 5 to part 746 are also
classified under ECCNs 5A992 or 5D992, which effectively negates some
of the exclusion under Sec. 746.8. This rule addresses this by adding
the same exclusion text for ECCNs 5A992 and 5D992, so that the license
requirement under Sec. 746.10(a)(1) does not impose a separate license
requirement on items that are within the scope of the exclusion text in
Sec. 746.8.
3. Conforming Changes to the Licensing Policies Under Sec. Sec. 746.5,
746.8, and 746.10 and Addition of Case-by-Case License Review Policy
for Applications for the Disposition of Items Needed as Part of
Companies Curtailing or Closing All Operations in Russia or Belarus
In Sec. Sec. 746.5, 746.8, and 746.10, this rule makes two changes
to the license review policies of these sections to make conforming
changes and to add one additional case-by-case license review policy.
a. Conforming changes to the license review policies in Sec. Sec.
746.5, 746.8, and 746.10.
In Sec. Sec. 746.5(b)(1) and (2) and 746.10(b), this rule makes
conforming changes to each of the licensing policies to conform to the
structure of the licensing policy paragraph under Sec. 746.8(b). This
rule does so by revising each of the sentences that specifies the
policy of denial license review policy by adding a period and then
adding a new sentence adding the same case-by-case license review
policy text to Sec. Sec. 746.5(b)(1) and (2) and 746.10(b), as is
currently found in Sec. 746.8(b). These changes also specify that
license applications under those sections, will be reviewed on a case-
by-case basis to determine whether the transaction in question would
benefit the Russian or Belarusian government or defense sector.
b. Addition of case-by-case license review policy for applications
for the disposition of items by companies curtailing or closing all
operations in Russia or Belarus.
In Sec. Sec. 746.5(b)(1) and (2), 746.8(b), and 746.10(b), this
rule adds a new case-by-case license review policy for applications for
the disposition of items by companies not headquartered in Country
Group D:1, D:5, E:1 or E:2 that are curtailing or closing all
operations in Russia or Belarus. Companies deciding to curtail or close
all operations in Russia put further pressure on the Russian government
and on the Russian and Belarusian defense industrial base, as their
departure will hollow out both countries' industrial capacity and
economy, which may lead to further degradation of their defense
industrial base. BIS encourages companies to exit the Russian and
Belarusian markets and is making these changes to facilitate such
decisions. In curtailing or closing operations in Russia or Belarus,
many companies and other entities have encountered difficulties, such
as issues related to the disposition of items subject to the EAR that
may be too large or cost-prohibitive to remove from Russia. The new
case-by-case license review policy added by this rule will facilitate
the orderly exit of companies and entities from Russia and Belarus in a
manner consistent with U.S. national security and foreign policy
interests. As discussed above, BIS will review such license application
to determine whether the disposition of these items will benefit the
Russian or Belarusian government or military.
Savings Clause
For the changes being made in this final rule, shipments of items
removed from eligibility for a License Exception or export, reexport,
or transfer (in-country) without a license (NLR) as a result of this
regulatory action that were en route aboard a carrier to a port of
export, reexport, or transfer (in-country), on February 24, 2023,
pursuant to actual orders for export, reexport, or transfer (in-
country) to or within a foreign destination, may proceed to that
destination under the previous eligibility for a License Exception or
export, reexport, or transfer (in-country) without a license (NLR),
provided the export, reexport, or transfer (in-country) is completed no
later than on March 27, 2023.
Export Control Reform Act of 2018
On August 13, 2018, the President signed into law the John S.
McCain National Defense Authorization Act for Fiscal Year 2019, which
included the Export Control Reform Act of 2018 (ECRA) (codified, as
amended, at 50 U.S.C. 4801-4852). ECRA provides the legal basis for
BIS's principal authorities and serves as the authority under which BIS
issues this rule. To the extent it applies to certain activities that
are the subject of this rule, the Trade Sanctions Reform and Export
Enhancement Act of 2000 (TSRA) (codified, as amended, at 22 U.S.C.
7201-7211) also serves as authority for this rule.
Rulemaking Requirements
1. This final rule is not a ``significant regulatory action''
because it ``pertain[s]'' to a ``military or foreign affairs function
of the United States'' under sec. 3(d)(2) of Executive Order 12866.
2. Notwithstanding any other provision of law, no person is
required to respond to, nor shall any person be subject to a penalty
for failure to comply with, a collection of information subject to the
requirements of the Paperwork Reduction Act of 1995 (44 U.S.C. 3501 et
seq.) (PRA), unless that collection of information displays a currently
valid Office of Management and Budget (OMB) Control Number.
This rule involves the following OMB-approved collections of
information subject to the PRA:
<bullet> 0694-0088, ``Multi-Purpose Application,'' which carries a
burden hour estimate of 29.4 minutes for a manual or electronic
submission;
<bullet> 0694-0096 ``Five Year Records Retention Period,'' which
carries a burden hour estimate of less than 1 minute; and
<bullet> 0607-0152 ``Automated Export System (AES) Program,'' which
carries a burden hour estimate of 3 minutes per electronic submission.
BIS estimates that these new controls on Russia and Belarus under
the EAR will result in an increase of 37 license applications submitted
annually to BIS. However, the additional burden falls within the
existing estimates currently associated with these control numbers.
Additional information regarding these collections of information--
including all background materials--can be found at <a href="https://www.reginfo.gov/public/do/PRAMain">https://www.reginfo.gov/public/do/PRAMain</a> by using the search function to enter
either the title of the collection or the OMB Control Number.
3. This rule does not contain policies with federalism implications
as that term is defined in Executive Order 13132.
4. Pursuant to section 1762 of the Export Control Reform Act of
2018 (50 U.S.C. 4821) (ECRA), this action is exempt from the
Administrative Procedure Act (APA) (5 U.S.C. 553) requirements for
notice of proposed rulemaking, opportunity for public participation,
and delay in effective date. While section 1762 of ECRA provides
sufficient authority for such an exemption, this action is also
independently exempt from these APA requirements because it involves a
military or foreign affairs function of the United States (5. U.S.C.
553(a)(1)).
5. Because a notice of proposed rulemaking and an opportunity for
[[Page 12181]]
public comment are not required to be given for this rule by 5 U.S.C.
553, or by any other law, the analytical requirements of the Regulatory
Flexibility Act, 5 U.S.C. 601, et seq., are not applicable.
Accordingly, no regulatory flexibility analysis is required and none
has been prepared.
List of Subjects
15 CFR Part 744
Exports, Reporting and recordkeeping requirements, Terrorism.
15 CFR Part 746
Exports, Reporting and recordkeeping requirements.
For the reasons stated in the preamble, parts 744 and 746 of the
Export Administration Regulations (15 CFR parts 730 through 774) are
amended as follows:
PART 744--CONTROL POLICY: END USE AND END USER CONTROLS
0
1. The authority citation for part 744 continues to read as follows:
Authority: 50 U.S.C. 4801-4852; 50 U.S.C. 4601 et seq.; 50
U.S.C. 1701 et seq.; 22 U.S.C. 3201 et seq.; 42 U.S.C. 2139a; 22
U.S.C. 7201 et seq.; 22 U.S.C. 7210; E.O. 12058, 43 FR 20947, 3 CFR,
1978 Comp., p. 179; E.O. 12851, 58 FR 33181, 3 CFR, 1993 Comp., p.
608; E.O. 12938, 59 FR 59099, 3 CFR, 1994 Comp., p. 950; E.O. 13026,
61 FR 58767, 3 CFR, 1996 Comp., p. 228; E.O. 13099, 63 FR 45167, 3
CFR, 1998 Comp., p. 208; E.O. 13222, 66 FR 44025, 3 CFR, 2001 Comp.,
p. 783; E.O. 13224, 66 FR 49079, 3 CFR, 2001 Comp., p. 786; Notice
of September 19, 2022, 87 FR 57569 (September 21, 2022); Notice of
November 8, 2022, 87 FR 68015 (November 10, 2022).
0
2. Section 744.7 is amended by revising paragraphs (a) introductory
text, (b)(1) introductory text, and (b)(2) introductory text to read as
follows:
Sec. 744.7 Restrictions on certain exports to and for the use of
certain foreign vessels or aircraft.
(a) General end-use prohibition. In addition to the license
requirements for items specified on the CCL, you may not export,
reexport, or transfer (in-country) an item subject to the EAR to, or
for the use of, a foreign vessel or aircraft, whether an operating
vessel or aircraft or one under construction, located in any port
including a Canadian port, unless a License Exception or NLR permits
the shipment to be made:
* * * * *
(b) Exception for U.S. and Canadian carriers. (1) Exception to
general end-use prohibition. Notwithstanding the general end-use
prohibition in paragraph (a) of this section, export, reexport, and
transfer (in-country) may be made of the commodities described in
paragraph (b)(3) of this section, for use by or on a specific vessel or
plane of U.S. or Canadian registry located at any seaport or airport
outside the United States or Canada except a port in Country Group D:1
(excluding the PRC), (see supplement no. 1 to part 740) provided that
such commodities are all of the following:
* * * * *
(2) Exports to U.S. or Canadian Airline's Installation or Agent.
Exports, reexports, and transfers (in-country) of the commodities
described in paragraph (e) of this section, except fuel, may be made to
a U.S. or Canadian airline's installation or agent in any foreign
destination except Country Group D:1 (excluding the PRC), (see
supplement no. 1 to part 740) provided such commodities are all of the
following:
* * * * *
PART 746--EMBARGOES AND OTHER SPECIAL CONTROLS
0
3. The authority citation for 15 CFR part 746 is revised to read as
follows:
Authority: 50 U.S.C. 4801-4852; 50 U.S.C. 4601 et seq.; 50
U.S.C. 1701 et seq.; 22 U.S.C. 287c; Sec 1503, Pub. L. 108-11, 117
Stat. 559; 22 U.S.C. 2151 note; 22 U.S.C. 6004; 22 U.S.C. 7201 et
seq.; 22 U.S.C. 7210; E.O. 12854, 58 FR 36587, 3 CFR, 1993 Comp., p.
614; E.O. 12918, 59 FR 28205, 3 CFR, 1994 Comp., p. 899; E.O. 13222,
66 FR 44025, 3 CFR, 2001 Comp., p. 783; E.O. 13338, 69 FR 26751, 3
CFR, 2004 Comp., p 168; Presidential Determination 2003-23, 68 FR
26459, 3 CFR, 2004 Comp., p. 320; Presidential Determination 2007-7,
72 FR 1899, 3 CFR, 2006 Comp., p. 325; Notice of May 9, 2022, 87 FR
28749 (May 10, 2022).
0
4. Section 746.5 is amended by revising paragraph (b) to read as
follows:
Sec. 746.5 Russian and Belarusian Industry Sector Sanctions.
* * * * *
(b) Licensing policy. (1) Applications for the export, reexport, or
transfer (in-country) of any item pursuant to paragraph (a)(1)(i) of
this section that requires a license for Russia or Belarus will be
reviewed under a policy of denial when for use directly or indirectly
for exploration or production from deepwater (greater than 500 feet),
Arctic offshore, or shale projects in Russia or Belarus that have the
potential to produce oil or gas. The following types of license
applications will be reviewed on a case-by-case basis to determine
whether the transaction in question would benefit the Russian or
Belarusian government or defense sector: applications for export,
reexport, or transfer (in-country) of items that may be necessary for
health and safety reasons and applications for the disposition of items
by companies not headquartered in Country Group D:1, D:5, E:1 or E:2 in
supplement no. 1 to part 740 that are curtailing or closing all
operations in Russia or Belarus.
(2) Applications for the export, reexport, or transfer (in-country)
of any item pursuant to paragraph (a)(1)(ii) or (iii) of this section
that requires a license for Russia or Belarus will be reviewed under a
policy of denial. The following types of license applications will be
reviewed on a case-by-case basis to determine whether the transaction
in question would benefit the Russian or Belarusian government or
defense sector: applications for export, reexport, or transfer (in-
country) of items that may be necessary for health and safety reasons;
applications for items that meet humanitarian needs; and applications
for the disposition of items by companies not headquartered in Country
Group D:1, D:5, E:1 or E:2 in supplement no. 1 to part 740 that are
curtailing or closing all operations in Russia or Belarus.
* * * * *
0
5. Section 746.8 is amended by revising paragraph (b) to read as
follows:
Sec. 746.8 Sanctions against Russia and Belarus.
* * * * *
(b) Licensing policy. With limited exceptions, applications for the
export, reexport, or transfer (in-country) of any item that requires a
license pursuant to the requirements of this section will be reviewed
with a policy of denial. The following types of license applications
for licenses required under paragraphs (a)(1) and (2) of this section
will be reviewed on a case-by-case basis to determine whether the
transaction in question would benefit the Russian or Belarusian
government or defense sector: applications related to safety of flight;
applications related to maritime safety; applications for civil nuclear
safety; applications to meet humanitarian needs; applications that
support government space cooperation; applications for items destined
to wholly-owned U.S. subsidiaries, branches, or sales offices, foreign
subsidiaries, branches, or sales offices of U.S. companies that are
joint ventures with other U.S. companies, joint ventures of U.S.
companies with companies headquartered in countries from Country Group
A:5 and A:6 in supplement no. 1 to part 740 of the EAR, the wholly-
owned subsidiaries, branches, or sales offices of companies
headquartered in countries from Country Group A:5 and A:6 in supplement
no. 1 to part 740, joint
[[Page 12182]]
ventures of companies headquartered in Country Groups A:5 and A:6 with
other companies headquartered in Country Groups A:5 and A:6;
applications for companies headquartered in Country Groups A:5 and A:6
to support civil telecommunications infrastructure; applications for
government-to-government activities; and applications for the
disposition of items by companies not headquartered in Country Group
D:1, D:5, E:1 or E:2 in supplement no. 1 to part 740 that are
curtailing or closing all operations in Russia or Belarus. License
applications required under paragraph (a)(3) of this section will be
reviewed under a policy of denial in all cases.
* * * * *
0
6. Section 746.10 is amended by adding paragraph (a) introductory text
and revising paragraph (b) to read as follows:
Sec. 746.10 `Luxury Goods' Sanctions Against Russia and Belarus and
Russian and Belarusian Oligarchs and Malign Actors.
(a) License requirements. For purposes of paragraphs (a)(1) of this
section, commodities and software classified under ECCNs 5A992 or 5D992
that have been `classified in accordance with Sec. 740.17' do not
require a license to or within Russia or Belarus for civil end-users
that are wholly-owned U.S. subsidiaries, branches, or sales offices,
foreign subsidiaries, branches, or sales offices of U.S. companies that
are joint ventures with other U.S. companies, joint ventures of U.S.
companies with companies headquartered in countries from Country Group
A:5 and A:6 in supplement no. 1 to part 740 of the EAR, the wholly-
owned subsidiaries, branches, or sales offices of companies
headquartered in countries from Country Group A:5 and A:6 in supplement
no. 1 to part 740, or joint ventures, branches, or sales offices of
companies headquartered in Country Group A:5 and A:6 with other
companies headquartered in Country Groups A:5 and A:6. In addition, for
purposes of paragraphs (a)(1) and (2), transfers within Russia or
Belarus for reexports (i.e., return) to the United States or a country
in Country Group A:5 or A:6 of any item, provided the owner retains
title to and control of the item at all times, do not require a
license. If a license is required for a reexport to a Country Group A:5
or A:6 country from Russia or Belarus, a separate EAR authorization is
required to authorize the reexport.
* * * * *
(b) Licensing policy. Applications for the export, reexport, or
transfer (in-country) of any item that requires a license for pursuant
to the requirements of this section will be reviewed with a policy of
denial. The following types of license applications will be reviewed on
a case-by-case basis to determine whether the transaction in question
would benefit the Russian or Belarusian government or defense sector:
applications involving items to meet humanitarian needs and
applications for the disposition of items by companies not
headquartered in Country Group D:1, D:5, E:1 or E:2 in supplement no. 1
to part 740 that are curtailing or closing all operations in Russia or
Belarus. The case-by-case license application review policy for items
to meet humanitarian needs is included to address certain `luxury
goods' items that may be used in medical devices or situations in which
a case-by-case analysis is needed to determine whether a license
application should be approved to meet humanitarian needs while also
taking into account the applicable broader U.S. national security and
foreign policy concerns.
* * * * *
0
7. Supplement No. 2 to part 746 is revised to read as follows:
Supplement No. 2 to Part 746--Russian and Belarusian Industry Sector
Sanction List Pursuant to Sec. 746.5(a)(1)(i)
(a) The source for the Harmonized Tariff Schedule (HTS)-6 codes and
descriptions in this list comes from the United States International
Trade Commission (USITC's) Harmonized Tariff Schedule of the United
States (2023). The items described in supplement no. 2 to part 746
include any modified or designed ``components,'' ``parts,''
``accessories,'' and ``attachments'' therefor regardless of the HTS
Code or HTS Description of the ``components,'' ``parts,''
``accessories,'' and ``attachments,'' apart from any ``part'' or minor
``component'' that is a fastener (e.g., screw, bolt, nut, nut plate,
stud, insert, clip, rivet, pin), washer, spacer, insulator, grommet,
bushing, spring, wire, or solder. This supplement includes two columns
consisting of the HTS Code and HTS Description to assist exporters,
reexporters, and transferors in identifying the products in this
supplement. For information on HTS codes in general, you may contact a
local import specialist at U.S. Customs and Border Protection at the
nearest port. HTS-6 codes 841350, 841360, 842139, 843049, 843139, and
847989 are listed in both this supplement and supplement no. 4 to this
part, so exporters, reexporters, and transferors must comply with the
license requirements under both Sec. 746.5(a)(1)(i) and (ii) as
applicable.
(b) The items identified in the HTS-6 Code column of this
supplement are subject to the license requirement under Sec.
746.5(a)(1)(i). The other column--HTS Description--is intended to
assist exporters with their Automated Export System (AES) filing
responsibilities. The license requirements apply to HTS Codes at the 8
and 10 digit level (HTS-8 and HTS-10 Codes, respectively) when such
longer HTS codes begin with the HTS-6 Codes as their first 6 numbers.
------------------------------------------------------------------------
HTS-6 code HTS description
------------------------------------------------------------------------
730411....................... LINE PIPE FOR OIL AND GAS PIPELINES, OF
STAINLESS STEEL.
730419....................... LINE PIPE FOR OIL AND GAS PIPELINES, OF
SEAMLESS IRON (OTHER THAN CAST IRON) OR
STEEL, NES.
730422....................... DRILL PIPE OF A KIND USED IN DRILLING FOR
OIL OR GAS, OF STAINLESS STEEL.
730423....................... DRILL PIPE OF A KIND USED IN DRILLING FOR
OIL OR GAS, OF IRON (EXCEPT CAST IRON)
OR STEEL. NES.
730424....................... CASING & TUBING USED IN DRILLING FOR OIL
OR GAS, OTHER OF STAINLESS STEEL.
730429....................... CASING AND TUBING OF A KIND USED IN
DRILLING FOR OIL OR GAS, OF IRON (EXCEPT
CAST IRON) OR STEEL.
730511....................... LINE PIPE FOR OIL OR GAS PIPELINES,
EXTERNAL DIAMETER OVER 406.4 MM (16
IN.), OF IRON OR STEEL, LONGITUDINALLY
SUBMERGED ARC WELDED.
730512....................... LINE PIPE FOR OIL OR GAS PIPELINES,
EXTERNAL DIAMETER OVER 406.4 MM (16
IN.), OF IRON OR STEEL, LONGITUDINALLY
WELDED NESOI.
730519....................... LINE PIPE FOR OIL OR GAS PIPELINES,
EXTERNAL DIAMETER OVER 406.4 MM (16
IN.), OF IRON OR STEEL, RIVETED OR
SIMILARLY CLOSED NESOI.
730520....................... CASING FOR OIL OR GAS DRILLING, EXTERNAL
DIAMETER OVER 406.4 MM (16 IN.), OF IRON
OR STEEL.
730611....................... LINE PIPE FOR OIL OR GAS PIPELINES,
WELDED, OF STAINLESS STEEL, NESOI.
730619....................... LINE PIPE FOR OIL OR GAS PIPELINES, OF
IRON OR STEEL, NESOI.
731100....................... CONTAINERS FOR COMPRESSED OR LIQUEFIED
GAS, OF IRON OR STEEL.
761300....................... ALUMINUM CONTAINERS FOR COMPRESSED OR
LIQUEFIED GAS.
[[Page 12183]]
820713....................... ROCK DRILLING OR EARTH BORING TOOLS WITH
WORKING PART OF CERMETS, AND PARTS
THEREOF.
820719....................... INTERCHANGEABLE TOOLS FOR HANDTOOLS,
WHETHER OR NOT POWER-OPERATED, OR FOR
MACHINE-TOOLS, INCLUDING ROCK DRILLING
OR EARTH BORING TOOLS; BASE METL PARTS.
841350....................... RECIPROCATING POSITIVE DISPLACEMENT
PUMPS, NESOI.
841360....................... ROTARY POSITIVE DISPLACEMENT PUMPS,
NESOI.
841382....................... LIQUID ELEVATORS.
841392....................... PARTS OF LIQUID ELEVATORS.
842139....................... FILTERING OR PURIFYING MACHINERY AND
APPARATUS FOR GASES, NESOI.
843049....................... BORING OR SINKING MACHINERY, NESOI, OTHER
THAN SELF-PROPELLED.
843139....................... PARTS FOR LIFTING, HANDLING, LOADING OR
UNLOADING MACHINERY, NESOI.
843143....................... PARTS FOR BORING OR SINKING MACHINERY,
NESOI.
847989....................... MACHINES AND MECHANICAL APPLIANCES HAVING
INDIVIDUAL FUNCTIONS, NESOI.
870520....................... MOBILE DRILLING DERRICKS.
870899....................... PARTS AND ACCESSORIES FOR MOTOR VEHICLES,
NESOI.
890520....................... FLOATING OR SUBMERSIBLE DRILLING OR
PRODUCTION PLATFORMS.
890590....................... LIGHT VESSELS, FIRE FLOATS, FLOATING
CRANES AND OTHER VESSELS WITH
NAVIGABILITY NOT THE MAIN FUNCTION,
NESOI; FLOATING DOCKS.
------------------------------------------------------------------------
0
8. Supplement no. 3 to part 746 is amended by revising the heading of
the supplement and adding an entry for ``Taiwan,'' to the table in
alphabetical order to read as follows:
Supplement No. 3 to Part 746--Countries Excluded From Certain License
Requirements of Sec. Sec. 746.7 and 746.8
* * * * *
------------------------------------------------------------------------
Federal Register
Country Scope citation
------------------------------------------------------------------------
* * * * * * *
Taiwan........................ Full............. 87 FR [INSERT FR PAGE
NUMBER], 2/27/2023.
* * * * * * *
------------------------------------------------------------------------
0
9. Supplement No. 4 to part 746 is revised to read as follows:
Supplement No. 4 to Part 746--Russian and Belarusian Industry Sector
Sanctions Pursuant to Sec. 746.5(a)(1)(ii)
(a) The source for the Harmonized Tariff Schedule (HTS)-6 codes and
descriptions in this list comes from the United States International
Trade Commission (USITC's) Harmonized Tariff Schedule of the United
States (2023). The items described in supplement no. 4 to part 746
include any modified or designed ``components,'' ``parts,''
``accessories,'' and ``attachments'' therefor regardless of the HTS
Code or HTS Description of the ``components,'' ``parts,''
``accessories,'' and ``attachments,'' apart from any ``part'' or minor
``component'' that is a fastener (e.g., screw, bolt, nut, nut plate,
stud, insert, clip, rivet, pin), washer, spacer, insulator, grommet,
bushing, spring, wire, or solder. This supplement includes two columns
consisting of the HTS Code and HTS Description to assist exporters,
reexporters, and transferors in identifying the products in this
supplement. For information on HTS codes in general, you may contact a
local import specialist at U.S. Customs and Border Protection at the
nearest port. HTS-6 codes 841350, 841360, 842139, 843049, 843139, and
847989 are listed in both this supplement and supplement no. 2 to this
part, so exporters, reexporters, and transferors must comply with the
license requirements under both Sec. 746.5(a)(1)(i) and (ii) as
applicable.
(b) The items identified in the HTS-6 Code column of this
supplement are subject to the license requirement under Sec.
746.5(a)(1)(ii). The other column--HTS Description--is intended to
assist exporters with their AES filing responsibilities. The license
requirements extend to HTS Codes at the 8 and 10 digit level (HTS-8 and
HTS-10 codes, respectively) when such longer HTS Codes begin with the
HTS-6 Codes as their first 6 numbers.
------------------------------------------------------------------------
HTS-6 code HTS description
------------------------------------------------------------------------
381519....................... SUPPORTED CATALYSTS, NESOI.
440810....................... VENEER SHEETS AND SHEETS FOR PLYWOOD,
ETC. WHETHER OR NOT PLANED, ETC., NOT
OVER 6 MM (.236 IN.) THICK, OF
CONIFEROUS WOOD.
440890....................... VENEER SHEETS AND SHEETS FOR PLYWOOD,
ETC. WHETHER OR NOT PLANED, ETC., NOT
OVER 6 MM (.236 IN.) THICK, OF
NONCONIFEROUS WOOD, NESOI.
441600....................... CASKS, BARRELS, VATS, TUBS AND OTHER
COOPERS' PRODUCTS AND PARTS THEREOF, OF
WOOD, INCLUDING STAVES.
720810....................... FLAT-ROLLED PRODUCTS OF IRON OR NONALLOY
STEEL, OF A WIDTH OF 600 MM OR MORE, IN
COILS, NOT FURTHER WORKED THAN HOT-
ROLLED, WITH PATTERNS IN RELIEF.
720825....................... FLAT-ROLLED PRODUCTS OF IRON OR NONALLOY
STEEL, OF A WIDTH OF 600 MM OR MORE,
COILS, HOT-ROLLED WORKED ONLY, PICKLED,
THICKNESS 4.75 MM OR MORE, NESOI.
720826....................... FLAT-ROLLED PRODUCTS OF IRON OR NONALLOY
STEEL, OF A WIDTH OF 600 MM OR MORE,
COILS, HOT-ROLLED WORKED ONLY, PICKLED,
3 MM BUT <4.75 MM THICK, N.E.S.O.I.
720827....................... FLAT-ROLLED PRODUCTS OF IRON OR NONALLOY
STEEL, WIDTH OF 600 MM OR MORE, IN
COILS, HOT-ROLLED WORKED ONLY, PICKLED,
LESS THAN 3 MM THICK, N.E.S.O.I.
720836....................... FLAT-ROLLED PRODUCTS OF IRON OR NONALLOY
STEEL, WIDTH OF 600 MM OR MORE IN COILS,
HOT-ROLLED WORKED ONLY, OF A THICKNESS
EXCEEDING 10 MM, N.E.S.O.I.
720837....................... FLAT-ROLLED PRODUCTS OF IRN OR NONALLOY
STEEL, WIDTH OF 600 MM OR MORE, IN
COILS, HOT-ROLLED WORKED ONLY, OF A
THICKNESS 4.75 MM BUT NOT OVER 10 MM
NESOI.
[[Page 12184]]
720838....................... FLAT-ROLLED PRODUCTS OF IRON OR NONALLOY
STEEL, WIDTH 600 MM OR MORE, IN
COILS,HOT-ROLLED WORKED ONLY, OF A
THICKNESS 3 MM OR MORE BUT UNDER 4.75
MM, NESOI.
720839....................... FLAT-ROLLED PRODUCTS OF IRON OR NONALLOY
STEEL, WIDTH 600 MM OR MORE, IN
COILS,HOT-ROLLED WORKED ONLY, OF A
THICKNESS OF LESS THAN 3 MM, N.E.S.O.I.
720840....................... FLAT-ROLLED IRON OR NONALLOY STEEL, 600
MM OR MORE WIDE, HOT-ROLLED, NOT CLAD,
PLATED OR COILS, PATTERNS IN RELIEF.
720851....................... FLAT-ROLLED PRODUCTS OF IRON OR NONALLOY
STEEL, WIDTH 600 MM OR MORE, NOT IN
COILS, HOT-ROLLED WORKED ONLY, OF A
THICKNESS EXCEEDING 10 MM, N.E.S.O.I.
720852....................... FLAT-ROLLED IRON OR NONALLOY STEEL, 600
MM OR MORE WIDE, HOT-ROLLED, NOT CLAD,
PLATED, COATED OR COILS, 4.75 MM TO 10
MM THICK.
720853....................... FLAT-ROLLED IRON OR NONALLOY STEEL, 600
MM OR MORE WIDE, HOT-ROLLED, NOT CLAD,
PLATED, COATED OR COILS, 3 MM TO UNDER
4.75 MM THICK.
720854....................... FLAT-ROLLED IRON OR NONALLOY STEEL, 600
MM OR MORE WIDE, HOT-ROLLED, NOT CLAD,
PLATED, COATED OR COILS, LESS THAN 3 MM
THICK.
720890....................... FLAT-ROLLED IRON OR NONALLOY STEEL
PRODUCTS, 600 MM OR MORE WIDE, HOT-
ROLLED, NOT CLAD, PLATED OR COATED,
NESOI.
720915....................... FLAT-ROLLED PRODUCTS OF IRON OR NONALLOY
STEEL, WIDTH 600 MM OR MORE, IN COILS,
COLD-ROLLED WORKED ONLY, OF A THICKNESS
OF 3 MM OR MORE.
720916....................... FLAT-ROLLED PRODUCTS OF IRON OR NONALLOY
STEEL, WIDTH 600 MM OR MORE, IN COILS,
COLD-ROLLED WORKED ONLY, OF A THICKNESS
OVER ONE MM BUT LESS THAN 3 MM.
720917....................... FLAT-ROLLED PRODUCTS OF IRON OR NONALLOY
STEEL, WIDTH 600 MM OR MORE, IN COILS,
COLD-ROLLED WORKED ONLY, OF A THICKNESS
0.5 MM OR MORE BUT NOT OVER 1 MM.
720918....................... FLAT-ROLLED PRODUCTS OF IRON OR NONALLOY
STEEL, WIDTH 600 MM OR MORE, IN COILS,
COLD-ROLLED WORKED ONLY, OF A THICKNESS
OF LESS THAN 0.5 MM.
720925....................... FLAT-ROLLED PRODUCTS OF IRON OR NONALLOY
STEEL, WIDTH 600 MM OR MORE, NOT IN
COILS, COLD-ROLLED WORKED ONLY, OF A
THICKNESS OF 3 MM OR MORE.
720926....................... FLAT-ROLLED PRODUCTS OF IRON OR NONALLOY
STEEL, WIDTH 600 MM OR MORE, NOT IN
COILS, COLD-ROLLED WORKED ONLY, OF A
THICKNESS OVER 1 MM BUT LESS THAN 3 MM.
720927....................... FLAT-ROLLED PRODUCTS OF IRON OR NONALLOY
STEEL, WIDTH 600 MM OR MORE, NOT IN
COILS, COLD-ROLLED WORKED ONLY, OF A
THICKNESS 0.5 MM OR MORE BUT N/O 1 MM.
720928....................... FLAT-ROLLED PRODUCTS OF IRON OR NONALLOY
STEEL, WIDTH 600 MM OR MORE, NOT IN
COILS, COLD-ROLLED WORKED ONLY, OF A
THICKNESS OF LESS THAN 0.5 MM.
720990....................... FLAT-ROLLED IRON OR NONALLOY STEEL
PRODUCTS, 600 MM OR MORE WIDE, COLD-
ROLLED, NOT CLAD, PLATED OR COATED,
NESOI.
721011....................... FLAT-ROLLED IRON OR NONALLOY STEEL
PRODUCTS, 600 MM OR MORE WIDE, PLATED OR
COATED WITH TIN, 0.5 MM OR MORE THICK.
721012....................... FLAT-ROLLED IRON OR NONALLOY STEEL
PRODUCTS, 600 MM OR MORE WIDE, PLATED OR
COATED WITH TIN, UNDER 0.5 MM THICK.
721020....................... FLAT-ROLLED IRON OR NONALLOY STEEL
PRODUCTS, 600 MM OR MORE WIDE, PLATED OR
COATED WITH LEAD, INCLUDING TERNE-PLATE.
721030....................... FLAT-ROLLED PRODUCTS OF IRON OR NONALLOY
STEEL, WIDTH OF 600 MM OR MORE,
ELECTROLYTICALLY PLATED OR COATED WITH
ZINC.
721041....................... FLAT-ROLLED IRON OR NONALLOY STEEL
PRODUCTS, CORRUGATED, 600 MM OR MORE
WIDE, PLATED OR COATED WITH ZINC OTHER
THAN ELECTROLYTICALLY.
721049....................... FLAT-ROLLED IRON OR NONALLOY STEEL
PRODUCTS, NOT CORRUGATED, 600 MM OR MORE
WIDE, PLATED OR COATED WITH ZINC OTHER
THAN ELECTROLYTICALLY.
721050....................... FLAT-ROLLED IRON OR NONALLOY STEEL
PRODUCTS, 600 MM OR MORE WIDE, PLATED OR
COATED WITH CHROMIUM OXIDES OR WITH
CHROMIUM AND CHROMIUM OXIDES.
721061....................... FLAT-ROLLED IRON OR NONALLOY STEEL 600 MM
OR MORE, PLATED OR COATED WITH ALUMINUM-
ZINC ALLOYS.
721069....................... FLAT-ROLLED IRON OR NONALLOY STEEL 600 MM
OR MORE, PLATED OR COATED WITH OTHER
ALUMINUM.
721070....................... FLAT-ROLLED IRON OR NONALLOY STEEL
PRODUCTS, 600 MM OR MORE WIDE, PAINTED,
VARNISHED OR COATED WITH PLASTICS.
721119....................... FLAT-ROLLED HIGH-STRENGTH NONALLLOY STEEL
PRODUCTS NESOI, UNDER 600 MM WIDE, HOT-
ROLLED, NOT CLAD, PLATED OR COATED,
UNDER 4.75 MM THICK.
721123....................... FLAT-ROLLED PRODUCTS OF IRON OR NONALLOY
STEEL, WIDTH LESS THAN 600 MM, NOT
FURTHER WORKED THAN COLD-ROLLED, NOT
CLAD, PLATED OR COATED, <0.25% CARBON.
721190....................... FLAT-ROLLED IRON OR NONALLOY STEEL
PRODUCTS, UNDER 600 MM WIDE, NOT CLAD,
PLATED OR COATED, NESOI.
721220....................... FLAT-ROLLED PRODUCTS OF IRON OR NONALLOY
STEEL, WIDTH OF LESS THAN 600 MM,
ELECTROLYTICALLY PLATED OR COATED WITH
ZINC.
721230....................... FLAT-ROLLED IRON OR NONALLOY STEEL
PRODUCTS, UNDER 600 MM WIDE, PLATED OR
COATED WITH ZINC OTHER THAN
ELECTROLYTICALLY.
721240....................... FLAT-ROLLED IRON OR NONALLOY STEEL
PRODUCTS, UNDER 600 MM WIDE, PAINTED,
VARNISHED OR COATED WITH PLASTICS.
721250....................... FLAT-ROLLED IRON OR NONALLOY STEEL
PRODUCTS, UNDER 600 MM WIDE, PLATED OR
COATED, NESOI.
721911....................... FLAT-ROLLED STAINLESS STEEL IN COILS, 600
MM OR MORE WIDE, HOT-ROLLED, OVER 10 MM
THICK.
721912....................... FLAT-ROLLED STAINLESS STEEL IN COILS, 600
MM OR MORE WIDE, HOT-ROLLED, 4.75 MM BUT
NOT OVER 10 MM THICK.
721913....................... FLAT-ROLLED STAINLESS STEEL IN COILS, 600
MM OR MORE WIDE, HOT-ROLLED, 3 MM BUT
UNDER 4.75 MM THICK.
721914....................... FLAT-ROLLED STAINLESS STEEL IN COILS, 600
MM OR MORE WIDE, HOT-ROLLED, UNDER 3 MM
THICK.
721921....................... FLAT-ROLLED STAINLESS STEEL NOT IN COILS,
600 MM OR MORE WIDE, HOT-ROLLED, OVER 10
MM THICK.
721922....................... FLAT-ROLLED STAINLESS STEEL NOT IN COILS,
600 MM OR MORE WIDE, HOT-ROLLED, 4.75 MM
BUT NOT OVER 10 MM THICK.
721923....................... FLAT-ROLLED STAINLESS STEEL NOT IN COILS,
600 MM OR MORE WIDE, HOT-ROLLED, 3 MM
BUT UNDER 4.75 MM THICK.
721924....................... FLAT-ROLLED STAINLESS STEEL NOT IN COILS,
600 MM OR MORE WIDE, HOT-ROLLED, UNDER 3
MM THICK.
721931....................... FLAT-ROLLED STAINLESS STEEL PRODUCTS, 600
MM OR MORE WIDE, COLD-ROLLED, 4.75 MM OR
MORE THICK.
721932....................... FLAT-ROLLED STAINLESS STEEL PRODUCTS, 600
MM OR MORE WIDE, COLD-ROLLED, 3 MM BUT
UNDER 4.75 MM THICK.
721933....................... FLAT-ROLLED STAINLESS STEEL PRODUCTS, 600
MM OR MORE WIDE, COLD-ROLLED, OVER 1 MM
BUT UNDER 3 MM THICK.
721934....................... FLAT-ROLLED STAINLESS STEEL PRODUCTS, 600
MM OR MORE WIDE, COLD-ROLLED, 0.5 MM BUT
NOT OVER 1 MM THICK.
721935....................... FLAT-ROLLED STAINLESS STEEL PRODUCTS, 600
MM OR MORE WIDE, COLD-ROLLED, UNDER 0.5
MM THICK.
721990....................... FLAT-ROLLED STAINLESS STEEL PRODUCTS, 600
MM OR MORE WIDE, NESOI.
722011....................... FLAT-ROLLED STAINLESS STEEL PRODUCTS,
UNDER 600 MM WIDE, HOT-ROLLED, 4.75 MM
OR MORE THICK.
722012....................... FLAT-ROLLED STAINLESS STEEL PRODUCTS,
UNDER 600 MM WIDE, HOT-ROLLED, UNDER
4.75 MM THICK.
722020....................... FLAT-ROLLED STAINLESS STEEL PRODUCTS,
UNDER 600 MM WIDE, COLD-ROLLED.
722090....................... FLAT-ROLLED STAINLESS STEEL PRODUCTS,
UNDER 600 MM WIDE, NESOI.
722511....................... FLAT-ROLLED SILICON ELECTRICAL STEEL 600
MM OR MORE WIDE, GRAIN-ORIENTED.
722540....................... FLAT-ROLLED ALLOY STEEL (OTHER THAN
STAINLESS) NOT IN COILS, 600 MM OR MORE
WIDE, HOT-ROLLED, NESOI.
722550....................... FLAT-ROLLED ALLOY STEEL (OTHER THAN
STAINLESS) PRODUCTS, 600 MM OR MORE
WIDE, COLD-ROLLED, NESOI.
[[Page 12185]]
722591....................... FLAT-ROLLED ALLOY STEEL NESOI, 600 MM OR
MORE WIDE, ELECTROLYTICALLY PLATED OR
COATED WITH ZINC.
722592....................... FLAT-ROLLED ALLOY STEEL NESOI 600 MM OR
MORE WIDE PLATED OR COATED WITH ZINC,
NOT ELECTROLYTICALLY.
722611....................... FLAT-ROLLED SILICON ELECTRICAL STEEL
UNDER 600 MM WIDE, GRAIN-ORIENTED.
722619....................... FLAT-ROLLED SILICON ELECTRICAL STEEL
UNDER 600 MM WIDE, NOT GRAIN-ORIENTED.
722620....................... FLAT-ROLLED HIGH-SPEED STEEL PRODUCTS,
UNDER 600 MM WIDE.
722692....................... FLAT-ROLLED ALLOY STEEL (OTHER THAN
STAINLESS) PRODUCTS, UNDER 600 MM WIDE,
COLD-ROLLED, NESOI.
722699....................... FLAT-ROLLED ALLOY STEEL (OTHER THAN
STAINLESS) PRODUCTS, UNDER 600 MM WIDE,
NESOI.
730810....................... BRIDGES AND BRIDGE SECTIONS OF IRON OR
STEEL.
730820....................... TOWERS AND LATTICE MASTS OF IRON OR
STEEL.
730830....................... DOORS, WINDOWS AND FRAMES AND THRESHOLDS
FOR DOORS, OF IRON OR STEEL.
730840....................... EQUIPMENT FOR SCAFFOLDING, SHUTTERING
PROPPING OR PIT-PROPPING, OF IRON OR
STEEL.
730890....................... STRUCTURES AND PARTS OF STRUCTURES NESOI,
OF IRON OR STEEL.
730900....................... RESERVOIRS, TANKS, CASKS, VATS AND
SIMILAR CONTAINERS NESOI, OF A CAPACITY
OF MORE THAN 300 LITERS (79.25 GAL.), OF
IRON OR STEEL.
731010....................... TANKS, DRUMS, CANS, AND SIMILAR PLAIN
CONTAINERS, A CAPACITY OF 50 LITERS
(13.21 GAL.) OR MORE, BUT NOT OVER 300
LITERS (79.25 GAL.), OF IRON OR STEEL.
731021....................... CANS, PLAIN, UNFITTED, OF A CAPACITY OF
LESS THAN 50 LITERS (13.21 GAL.), WHICH
WILL BE CLOSED BY SOLDERING OR CRIMPING,
OF IRON OR STEEL.
731029....................... TANKS, CASKS, DRUMS, CANS, BOXES AND
SIMILAR PLAIN, UNFITTED CONTAINERS
NESOI, OF A CAPACITY OF LESS THAN 50
LITERS (13.21 GAL.), OF IRON OR STEEL.
761010....................... ALUMINUM DOORS, WINDOWS AND THEIR FRAMES
AND THRESHOLDS FOR DOORS.
761090....................... ALUMINUM STRUCTURES AND PARTS OF
STRUCTURES, NESOI.
761210....................... ALUMINUM COLLAPSIBLE TUBULAR CONTAINERS,
OF A CAPACITY NOT OVER 300 LITERS (79.30
GAL.).
820760....................... TOOLS FOR BORING OR BROACHING, AND PARTS
THEREOF, OF BASE METAL.
820810....................... KNIVES AND CUTTING BLADES FOR METAL
WORKING, AND PARTS THEREOF, OF BASE
METAL.
820820....................... KNIVES AND CUTTING BLADES FOR WOOD
WORKING, AND PARTS THEREOF, OF BASE
METAL.
820830....................... KNIVES AND CUTTING BLADES FOR KITCHEN
APPLIANCES OR FOR MACHINES USED BY THE
FOOD INDUSTRY, AND PARTS THEREOF, OF
BASE METAL.
820840....................... KNIVES AND CUTTING BLADES FOR
AGRICULTURAL OR FORESTRY MACHINES, AND
PARTS THEREOF, OF BASE METAL.
820890....................... KNIVES AND CUTTING BLADES FOR MACHINES OR
MECHANICAL APPLIANCES NESOI, AND PARTS
THEREOF, OF BASE METAL.
840212....................... WATERTUBE BOILERS WITH A STEAM PRODUCTION
NOT EXCEEDING 45 T PER HOUR.
840219....................... VAPOR GENERATING BOILERS, NESOI,
INCLUDING HYBRID BOILERS.
840220....................... SUPER-HEATED WATER BOILERS.
840290....................... PARTS FOR SUPER-HEATED WATER BOILERS AND
STEAM OR OTHER VAPOR GENERATION BOILERS
(OTHER THAN CENTRAL HEATING HOT WATER
BOILERS).
840410....................... AUXILIARY PLANT FOR USE WITH STEAM OR
OTHER VAPOR GENERATING BOILERS, SUPER-
HEATED WATER BOILERS AND CENTRAL HEATING
BOILERS.
840420....................... CONDENSERS FOR STEAM OR OTHER VAPOR POWER
UNITS.
840490....................... PARTS FOR AUXILIARY PLANT FOR USE WITH
STEAM OR OTHER VAPOR GENERATING BOILERS
AND CONDENSER POWER UNITS, SUPER-HEATED
AND CENTRAL HEATING BOILERS.
840510....................... PRODUCER GAS AND WATER GAS GENERATORS,
ACTYLENE GAS AND SIMILAR WATER PROCESS
GAS GENERATORS, WITH OR WITHOUT THEIR
PURIFIERS.
840590....................... PARTS FOR PRODUCER GAS AND WATER GAS
GENERATORS, ACTYLENE GAS AND SIMILAR
PROCESS GAS GENERATORS.
840681....................... TURBINES, STEAM AND OTHER VAPOR TYPES, OF
AN OUTPUT EXCEEDING 40 MW, EXCEPT FOR
MARINE PROPULSION.
840682....................... TURBINES, STEAM AND OTHER VAPOR TYPES, OF
AN OUTPUT NOT EXCEEDING 40 MW, EXCEPT
FOR MARINE PROPULSION.
840690....................... PARTS FOR STEAM AND OTHER VAPOR TURBINES.
840721....................... OUTBOARD ENGINES FOR MARINE PROPULSION.
840729....................... INBOARD ENGINES FOR MARINE PROPULSION.
840810....................... MARINE COMPRESSION-IGNITION INTERNAL
COMBUSTION PISTON ENGINES (DIESEL OR
SEMI-DIESEL ENGINES).
840820....................... COMPRESSION-IGNITION INTERNAL COMBUSTION
PISTON ENGINES (DIESEL OR SEMI-DIESEL),
FOR THE PROPULSION OF VEHICLES EXCEPT
RAILWAY OR TRAMWAY STOCK.
840890....................... COMPRESSION-IGNITION INTERNAL COMBUSTION
PISTON ENGINES (DIESEL OR SEMI-DIESEL
ENGINES), NESOI.
840999....................... PARTS FOR USE WITH COMPRESSION-IGNITION
INTERNAL COMBUSTION PISTON ENGINES,
NESOI.
841090....................... PARTS, INCLUDING REGULATORS, FOR
HYDRAULIC TURBINES AND WATER WHEELS.
841111....................... TURBOJETS OF A THRUST NOT EXCEEDING 25
KN.
841112....................... TURBOJETS OF A THRUST EXCEEDING 25 KN.
841121....................... TURBOPROPELLERS OF A POWER NOT EXCEEDING
1,100 KW.
841122....................... TURBOPROPELLERS OF A POWER EXCEEDING
1,100 KW.
841191....................... PARTS OF TURBOJETS OR TURBOPROPELLERS.
841210....................... REACTION ENGINES OTHER THAN TURBOJETS.
841221....................... HYDRAULIC POWER ENGINES AND MOTORS,
LINEAR ACTING (CYLINDERS).
841229....................... HYDRAULIC POWER ENGINES AND MOTORS,
EXCEPT LINEAR ACTING (CYLINDERS).
841239....................... PNEUMATIC POWER ENGINES AND MOTORS,
EXCEPT LINEAR ACTING (CYLINDERS).
841280....................... ENGINES AND MOTORS, NESOI.
841311....................... PUMPS FOR DISPENSING FUEL OR LUBRICANTS,
OF A TYPE USED IN FILLING-STATIONS OR
GARAGES.
841319....................... PUMPS FITTED OR DESIGNED TO BE FITTED
WITH A MEASURING DEVISE, NESOI.
841330....................... FUEL, LUBRICATING OR COOLING MEDIUM PUMPS
FOR INTERNAL COMBUSTION PISTON ENGINES.
841350....................... RECIPROCATING POSITIVE DISPLACEMENT
PUMPS, NESOI.
841360....................... ROTARY POSITIVE DISPLACEMENT PUMPS,
NESOI.
841381....................... PUMPS FOR LIQUIDS, NESOI.
841410....................... VACUUM PUMPS.
841490....................... PARTS FOR AIR OR VACUUM PUMPS, AIR OR
OTHER GAS COMPRESSORS AND FANS; PARTS OF
VENTILATING OR RECYCLING HOODS
INCORPORATING A FAN, NESOI.
841520....................... AUTOMOTIVE AIR CONDITIONERS.
841583....................... AIR CONDITIONING MACHINES NESOI, NOT
INCORPORATING A REFRIGERATING UNIT.
841610....................... FURNACE BURNERS FOR LIQUID FUEL.
841620....................... FURNACE BURNERS FOR PULVERIZED SOLID FUEL
OR FOR GAS, INCLUDING COMBINATION
BURNERS.
841630....................... MECHANICAL STOKERS INCLUDING THEIR
MECHANICAL GRATES, MECHANICAL ASH
DISCHARGERS AND SIMILAR APPLIANCES.
841690....................... PARTS OF FURNACE BURNERS FOR LIQUID FUEL,
PULVERIZED SOLID FUEL OR GAS; PARTS OF
MECHANICAL STOKERS, GRATES, ASH
DISCHARGERS AND SIMILAR APPLIANCES.
841720....................... BAKERY OVENS, INCLUDING BISCUIT OVENS,
NONELECTRIC.
841861....................... COMPRESSION TYPE HEAT PUMP UNITS WHOSE
CONDENSERS ARE HEAT EXCHANGERS
(EXCLUDING REVERSIBLE HEAT PUMPS CAPABLE
OF CHANGING TEMPERATURE AND HUMIDITY).
[[Page 12186]]
841869....................... REFRIGERATING OR FREEZING EQUIPMENT,
NESOI.
841919....................... INSTANTANEOUS OR STORAGE WATER HEATERS,
EXCEPT INSTANTANEOUS GAS WATER HEATERS,
NONELECTRIC.
841940....................... DISTILLING OR RECTIFYING PLANT.
841950....................... HEAT EXCHANGE UNITS, INDUSTRIAL TYPE.
841960....................... MACHINERY FOR LIQUEFYING AIR OR OTHER
GASES.
841989....................... MACHINERY, PLANT OR LABORATORY EQUIPMENT
FOR THE TREATMENT OF MATERIAL INVOLVING
TEMPERATURE CHANGE (EXCEPT DOMESTIC
MACHINERY), NESOI.
841990....................... PARTS FOR MACHINERY, PLANT OR LABORATORY
EQUIPMENT FOR THE TREATMENT OF MATERIAL
INVOLVING TEMPERATURE CHANGE (EXCEPT
DOMESTIC MACHINERY), NESOI.
842091....................... CYLINDERS FOR CALENDERING OR OTHER
ROLLING MACHINES, OTHER THAN FOR METALS
OR GLASS.
842099....................... PARTS, EXCEPT CYLINDERS, FOR CALENDERING
OR OTHER ROLLING MACHINES, OTHER THAN
FOR METALS OR GLASS.
842111....................... CREAM SEPARATORS, CENTRIFUGAL.
842119....................... CENTRIFUGES, INCLUDING CENTRIFUGAL DRYERS
(OTHER THAN CLOTHES DRYERS), NESOI.
842123....................... OIL OR FUEL FILTERS FOR INTERNAL
COMBUSTION ENGINES.
842129....................... FILTERING OR PURIFYING MACHINERY AND
APPARATUS FOR LIQUIDS, NESOI.
842131....................... INTAKE AIR FILTERS FOR INTERNAL
COMBUSTION ENGINES.
842139....................... FILTERING OR PURIFYING MACHINERY AND
APPARATUS FOR GASES, NESOI.
842191....................... PARTS OF CENTRIFUGES, INCLUDING
CENTRIFUGAL DRYERS.
842199....................... PARTS FOR FILTERING OR PURIFYING
MACHINERY AND APPARATUS FOR LIQUIDS OR
GASES.
842410....................... FIRE EXTINGUISHERS, WHETHER OR NOT
CHARGED.
842489....................... MECHANICAL APPLIANCES FOR PROJECTING,
DISPERSING OR SPRAYING LIQUIDS OR
POWDERS, NESOI.
842490....................... PARTS FOR MECHANICAL APPLIANCES FOR
PROJECTING, DISPERSING OR SPRAYING, FIRE
EXTINGUISHERS, SPRAY GUNS, AND STEAM OR
SAND BLASTING MACHINES.
842511....................... PULLEY TACKLE AND HOISTS, OTHER THAN SKIP
HOISTS OR HOISTS OF A KIND USED FOR
RAISING VEHICLES, POWERED BY ELECTRIC
MOTOR.
842531....................... WINCHES AND CAPSTANS POWERED BY ELECTRIC
MOTORS.
842611....................... OVERHEAD TRAVELING CRANES ON FIXED
SUPPORT.
842612....................... MOBILE LIFTING FRAMES ON TIRES AND
STRADDLE CARRIERS.
842619....................... OVERHEAD TRAVELING CRANES, TRANSPORTER
CRANES, GANTRY AND BRIDGE CRANES, MOBILE
LIFTING FRAMES AND STRADDLE CARRIES,
NESOI.
842620....................... TOWER CRANES.
842630....................... PORTAL OR PEDESTAL JIB CRANES.
842641....................... DERRICKS, CRANES, NESOI AND WORKS TRUCKS
FITTED WITH A CRANE, SELF-PROPELLED, ON
TIRES.
842649....................... DERRICKS, CRANES, NESOI AND WORKS TRUCKS
FITTED WITH A CRANE, SELF-PROPELLED, NOT
ON TIRES.
842691....................... LIFTING OR HANDLING MACHINERY DESIGNED
FOR MOUNTING ON ROAD VEHICLES.
842699....................... LIFTING OR HANDLING MACHINERY, NESOI.
842710....................... SELF-PROPELLED LIFTING OR HANDLING TRUCKS
POWERED BY AN ELECTRIC MOTOR.
842720....................... SELF-PROPELLED LIFTING OR HANDLING TRUCKS
POWERED BY OTHER THAN AN ELECTRIC MOTOR.
842790....................... FORK-LIFT AND OTHER WORKS TRUCKS FITTED
WITH LIFTING OR HANDLING EQUIPMENT,
OTHER THAN SELF-PROPELLED, NESOI.
842820....................... PNEUMATIC ELEVATORS AND CONVEYORS.
842831....................... CONTINUOUS-ACTION ELEVATORS AND
CONVEYORS, FOR GOODS OR MATERIALS,
SPECIALLY DESIGNED FOR UNDERGROUND USE.
842832....................... CONTINUOUS-ACTION ELEVATORS AND
CONVEYORS, FOR GOODS OR MATERIALS, OTHER
THAN FOR UNDERGROUND USE, BUCKET TYPE.
842833....................... CONTINUOUS-ACTION ELEVATORS AND
CONVEYORS, FOR GOODS OR MATERIALS, OTHER
THAN FOR UNDERGROUND USE, BELT TYPE.
842839....................... CONTINUOUS-ACTION ELEVATORS AND
CONVEYORS, FOR GOODS OR MATERIALS, OTHER
THAN FOR UNDERGROUND USE, NESOI.
842870....................... LIFTING, HANDLING, LOADING OR UNLOADING
MACHINERY NESOI.
842890....................... LIFTING, HANDLING, LOADING OR UNLOADING
MACHINERY NESOI.
842911....................... BULLDOZERS AND ANGLEDOZERS, SELF-
PROPELLED, TRACK LAYING.
842919....................... BULLDOZERS AND ANGLEDOZERS, SELF-
PROPELLED, OTHER THAN TRACK LAYING.
842920....................... GRADERS AND LEVELERS, SELF-PROPELLED.
842930....................... SCRAPERS, SELF-PROPELLED.
842940....................... TAMPING MACHINES AND ROAD ROLLERS, SELF-
PROPELLED.
842951....................... MECHANICAL FRONT-END SHOVEL LOADERS, SELF-
PROPELLED.
842952....................... MECHANICAL SHOVELS, EXCAVATORS AND SHOVEL
LOADERS WITH 360 DEGREE REVOLVING
SUPERSTRUCTURE, SELF-PROPELLED.
842959....................... MECHANICAL SHOVELS, EXCAVATORS AND SHOVEL
LOADERS NESOI, SELF-PROPELLED.
843010....................... PILE-DRIVERS AND PILE-EXTRACTORS.
843039....................... COAL OR ROCK CUTTERS AND TUNNELING
MACHINERY, OTHER THAN SELF-PROPELLED.
843049....................... BORING OR SINKING MACHINERY, NESOI, OTHER
THAN SELF-PROPELLED.
843050....................... MOVING, GRADING, LEVELING, SCRAPING,
EXCAVATING, TAMPING, COMPACTING OR
EXTRACTING MACHINERY FOR EARTH, MINERALS
OR ORES, NESOI, SELF-PROPELLED.
843069....................... MOVING, GRADING, LEVELING, EXCAVATING,
EXTRACTING MACHINERY FOR EARTH, MINERALS
OR ORES, NESOI, NOT SELF-PROPELLED.
843120....................... PARTS FOR FORK-LIFT TRUCKS AND OTHER
WORKS TRUCKS FITTED WITH LIFTING OR
HANDLING EQUIPMENT.
843139....................... PARTS FOR LIFTING, HANDLING, LOADING OR
UNLOADING MACHINERY, NESOI.
843141....................... BUCKETS, SHOVELS, GRABS AND GRIPS FOR
DERRICKS, CRANES, BULLDOZERS,
ANGLEDOZERS, GRADERS, SCRAPERS, BORERS,
EXTRACTING, ETC. MACHINERY.
843149....................... PARTS AND ATTACHMENTS, NESOI, FOR
DERRICKS, CRANES, SELF-PROPELLED
BULLDOZERS, GRADERS ETC. AND OTHER
GRADING, SCRAPING, ETC. MACHINERY.
843910....................... MACHINERY FOR MAKING PULP OF FIBROUS
CELLULOSIC MATERIAL.
843930....................... MACHINERY FOR FINISHING PAPER OR
PAPERBOARD.
844090....................... PARTS FOR BOOKBINDING MACHINERY,
INCLUDING PARTS FOR BOOK-SEWING
MACHINES.
844130....................... MACHINES FOR MAKING PAPER CARTONS, BOXES,
CASES, DRUMS AND SIMILAR CONTAINERS,
OTHER THAN BY MOLDING.
844230....................... MACHINERY, APPARATUS AND EQUIPMENT,
NESOI, FOR PREPARING OR MAKING PRINTING
BLOCKS, PLATES, CYLINDERS OR OTHER
PRINTING COMPONENTS.
844240....................... PARTS OF MACHINERY, APPARATUS AND
EQUIPMENT, NESOI, FOR TYPESETTING ETC.
AND PREPARING OR MAKING PRINTING BLOCKS
OR OTHER PRINTING COMPONENTS.
844311....................... OFFSET PRINTING MACHINERY, REEL-FED.
844313....................... OFFSET PRINTING MACHINERY, NESOI.
844315....................... LETTERPRESS PRINTING MACHINERY, OTHER
THAN REEL FED, EXCLUDING FLEXOGRAPHIC
PRINTING.
[[Page 12187]]
844316....................... FLEXOGRAPHIC PRINTING MACHINERY.
844317....................... GRAVURE PRINTING MACHINERY.
844319....................... OFFSET PRINTING MACHINERY, NESOI.
844391....................... PARTS AND ACCESSORIES OF PRINTING
MACHINERY USED FOR PRINTING BY MEANS OF
PLATES, CYLINDERS AND OTHER PRINTING
COMPONENTS OF HEAD. 8442.
844400....................... MACHINES FOR EXTRUDING, DRAWING,
TEXTURING OR CUTTING MANMADE TEXTILE
MATERIALS.
844621....................... POWER LOOMS FOR WEAVING FABRICS OF A
WIDTH EXCEEDING 30 CM, SHUTTLE TYPE.
844629....................... WEAVING MACHINES (LOOMS) FOR WEAVING
FABRICS OF A WIDTH EXCEEDING 30 CM,
SHUTTLE TYPE, NESOI.
844811....................... AUXILIARY MACHINERY FOR TEXTILE MACHINES
(HEADINGS 8444 TO 8447), DOBBIES AND
JACQUARDS, CARD REDUCING, COPYING,
PUNCHING OR ASSEMBLING MACHINES.
844819....................... AUXILIARY MACHINERY FOR TEXTILE MACHINES
(HEADINGS 8444 TO 8447), NESOI.
844820....................... PARTS AND ACCESSORIES FOR MACHINES FOR
EXTRUDING, DRAWING, TEXTURING OR CUTTING
MANMADE TEXTILE MATERIALS, OR OF THEIR
AUXILIARY MACHINERY.
844833....................... SPINDLES, SPINDLE FLYERS, SPINNING RINGS
AND RING TRAVELLERS, FOR MACHINERY USED
FOR PREPARING OR PRODUCING TEXTILE
YARNS, ETC.
844839....................... PARTS AND ACCESSORIES FOR TEXTILE
SPINNING, DOUBLING OR TWISTING, WINDING
OR REELING AND YARN PRODUCING MACHINES,
ETC., NESOI.
844842....................... REEDS FOR LOOMS, HEALDS AND HEALD-FRAMES.
844849....................... PARTS AND ACCESSORIES OF WEAVING MACHINES
(LOOMS) OR OF THEIR AUXILIARY MACHINERY,
NESOI.
844851....................... SINKERS, NEEDLES AND OTHER ARTICLES USED
IN FORMING STITCHES FOR KNITTING
MACHINES, STITCH-BONDING AND GIMPED YARN
ETC. MACHINES.
845110....................... DRY-CLEANING MACHINES FOR TEXTILES YARNS,
FABRICS OR MADE UP TEXTILE ARTICLES.
845129....................... DRYING MACHINES (EXCEPT CENTRIFUGAL TYPE)
FOR TEXTILE YARNS, FABRICS OR MADE UP
TEXTILE ARTICLES, WITH A DRY LINEN
CAPACITY EXCEEDING 10 KG.
845130....................... IRONING MACHINES AND PRESSES (INCLUDING
FUSING PRESSES) FOR TEXTILE YARNS,
FABRICS OR MADE UP TEXTILE ARTICLES.
845190....................... PARTS FOR MACHINERY FOR WASHING,
CLEANING, WRINGING ETC. TEXTILE YARNS
AND FABRICS, APPLYING PASTE TO BASE
FABRIC ETC. AND REELING ETC. TEXTILE
FABRIC.
845230....................... SEWING MACHINE NEEDLES.
845310....................... MACHINES FOR PREPARING, TANNING OR
WORKING HIDES, SKINS OR LEATHER.
845380....................... MACHINERY (OTHER THAN SEWING MACHINES),
FOR MAKING OR REPAIRING ARTICLES OF
HIDES, SKINS OR LEATHER, EXCEPT
FOOTWEAR.
845390....................... PARTS OF MACHINERY (EXCEPT SEWING
MACHINES) FOR TANNING ETC. HIDES, SKINS
OR LEATHER OR FOR MAKING OR REPAIRING
ARTICLES OF HIDES, SKINS OR LEATHER.
845410....................... CONVERTERS USED IN METALLURGY OR METAL
FOUNDRIES.
845420....................... INGOT MOLDS AND LADLES USED IN METALLURGY
OR METAL FOUNDRIES.
845490....................... PARTS FOR CONVERTERS, LADLES, INGOT MOLDS
AND CASTING MACHINES USED IN METALLURGY
OR METAL FOUNDRIES.
845522....................... COLD METAL-ROLLING MILLS, EXCEPT TUBE
MILLS.
845530....................... ROLLS FOR METAL-ROLLING MILLS.
845620....................... MACHINE TOOLS FOR WORKING ANY MATERIAL BY
REMOVAL OF MATERIAL, BY ULTRASONIC
PROCESSES.
845640....................... MACHINE TOOLS FOR WORKING ANY MATERIAL BY
REMOVAL OF MATERIAL OPERATED BY PLASMA
ARC PROCESSES.
845690....................... MACHINE TOOLS FOR REMOVAL OF MATERIAL BY
ELECTRO-CHEMICAL, ELECTRON-BEAM, IONIC-
BEAM OR PLASMA ARC PROCESSES, N.E.S.O.I.
845710....................... MACHINING CENTERS FOR WORKING METAL.
845730....................... MULTISTATION TRANSFER MACHINES FOR
WORKING METAL.
845811....................... HORIZONTAL LATHES FOR REMOVING METAL,
NUMERICALLY CONTROLLED.
845819....................... HORIZONTAL LATHES FOR REMOVING METAL, NOT
NUMERICALLY CONTROLLED.
845891....................... LATHES, EXCLUDING HORIZONTAL, FOR
REMOVING METAL, NUMERICALLY CONTROLLED.
845899....................... LATHES, EXCLUDING HORIZONTAL, FOR
REMOVING METAL, NOT NUMERICALLY
CONTROLLED.
845910....................... WAY-TYPE UNIT HEAD MACHINES FOR REMOVING
METAL.
845921....................... DRILLING MACHINES FOR REMOVING METAL
NESOI, NUMERICALLY CONTROLLED.
845931....................... BORING-MILLING MACHINES FOR REMOVING
METAL NESOI, NUMERICALLY CONTROLLED.
845941....................... NUMERICALLY CONTROLLED BORING MACHINES,
NESOI.
845949....................... OTHER BORING MACHINES, NESOI.
845961....................... MILLING MACHINES, NOT KNEE TYPE, FOR
REMOVING METAL, NUMERICALLY CONTROLLED.
845970....................... THREADING OR TAPPING MACHINES, FOR
REMOVING METAL.
846012....................... FLAT-SURFACE GRINDING MACHINES,
NUMERICALLY CONTROLLED.
846019....................... FLAT-SURFACE GRINDING MACHINES FOR
REMOVING METAL, AXIS ACCURACY OF 0.01 MM
OR MORE, NOT NUMERICALLY CONTROLLED.
846022....................... CENTERLESS GRINDING MACHINES, NUMERICALLY
CONTROLLED.
846023....................... OTHER CYLINDRICAL GRINDING MACHINES,
NUMERICALLY CONTROLLED.
846024....................... OTHER GRINDING MACHINES, NESOI,
NUMERICALLY CONTROLLED.
846029....................... GRINDING MACHINES FOR REMOVING METAL,
EXCEPT FLAT-SURFACE, AXIS ACCURACY OF
0.01 MM OR MORE, NOT NUMERICALLY
CONTROLLED.
846031....................... SHARPENING (TOOL OR CUTTER GRINDING)
MACHINES FOR REMOVING METAL, NUMERICALLY
CONTROLLED.
846039....................... SHARPENING (TOOL OR CUTTER GRINDING)
MACHINES FOR REMOVING METAL, NOT
NUMERICALLY CONTROLLED.
846040....................... HONING OR LAPPING MACHINES FOR REMOVING
METAL.
846090....................... MACHINE TOOLS FOR DEBURRING, POLISHING
METAL, SINTERED METAL CARBIDES,
ABRASIVES OR POLISHING PRODUCTS, OTHER
THAN GEAR CUTTING, ETC., NESOI.
846120....................... SHAPING OR SLOTTING MACHINES FOR REMOVING
METAL.
846130....................... BROACHING MACHINES FOR REMOVING METAL.
846140....................... GEAR CUTTING, GEAR GRINDING OR GEAR
FINISHING MACHINES.
846150....................... SAWING OR CUTTING-OFF MACHINES FOR
REMOVING METAL.
846190....................... MACHINE TOOLS WORKING BY REMOVING METAL,
SINTERED METAL CARBIDES OR CERMETS,
NESOI.
846211....................... FORGING OR DIE-STAMPING MACHINES
(INCLUDING PRESSES) AND HAMMERS FOR
WORKING METAL.
846219....................... FORGING OR DIE-STAMPING MACHINES
(INCLUDING PRESSES) AND HAMMERS FOR
WORKING METAL.
846222....................... BENDING, FOLDING, STRAIGHTENING OR
FLATTENING MACHINES (INCLUDING PRESSES)
FOR WORKING METAL, NOT NUMERICALLY
CONTROLLED.
846223....................... BENDING, FOLDING, STRAIGHTENING OR
FLATTENING MACHINES (INCLUDING PRESSES)
FOR WORKING METAL, NUMERICALLY
CONTROLLED.
846224....................... BENDING, FOLDING, STRAIGHTENING OR
FLATTENING MACHINES (INCLUDING PRESSES)
FOR WORKING METAL, NUMERICALLY
CONTROLLED.
846225....................... BENDING, FOLDING, STRAIGHTENING OR
FLATTENING MACHINES (INCLUDING PRESSES)
FOR WORKING METAL, NUMERICALLY
CONTROLLED.
[[Page 12188]]
846226....................... BENDING, FOLDING, STRAIGHTENING OR
FLATTENING MACHINES (INCLUDING PRESSES)
FOR WORKING METAL, NUMERICALLY
CONTROLLED.
846229....................... BENDING, FOLDING, STRAIGHTENING OR
FLATTENING MACHINES (INCLUDING PRESSES)
FOR WORKING METAL, NOT NUMERICALLY
CONTROLLED.
846232....................... SHEARING MACHINES (INCLUDING PRESSES) FOR
WORKING METAL, OTHER THAN COMBINED
PUNCHING AND SHEARING MACHINES,
NUMERICALLY CONTROLLED.
846233....................... SHEARING MACHINES (INCLUDING PRESSES) FOR
WORKING METAL, OTHER THAN COMBINED
PUNCHING AND SHEARING MACHINES,
NUMERICALLY CONTROLLED.
846239....................... SHEARING MACHINES (INCLUDING PRESSES) FOR
WORKING METAL, OTHER THAN COMBINED
PUNCHING AND SHEARING MACHINES, NOT
NUMERICALLY CONTROLLED.
846242....................... PUNCHING OR NOTCHING MACHINES (INCLUDING
PRESSES) FOR WORKING METAL, INCLUDING
COMBINED PUNCHING AND SHEARING MACHINES,
NUMERICALLY CONTROLLED.
846249....................... PUNCHING OR NOTCHING MACHINES (INCLUDING
PRESSES) FOR WORKING METAL, INCLUDING
COMBINED PUNCHING AND SHEARING MACHINES,
NOT NUMERICALLY CONTROLLED.
846251....................... PUNCHING OR NOTCHING MACHINES (INCLUDING
PRESSES) FOR WORKING METAL, INCLUDING
COMBINED PUNCHING AND SHEARING MACHINES,
NUMERICALLY CONTROLLED.
846259....................... PUNCHING OR NOTCHING MACHINES (INCLUDING
PRESSES) FOR WORKING METAL, INCLUDING
COMBINED PUNCHING AND SHEARING MACHINES,
NOT NUMERICALLY CONTROLLED.
846261....................... HYDRAULIC PRESSES FOR WORKING METAL.
846262....................... MACHINE TOOLS (INCLUDING PRESSES) FOR
WORKING METAL BY FORGING, HAMMERING, DIE-
CASTING, BENDING, FOLDING, FLATTENING,
WORKING METAL CARBIDES, NESOI.
846263....................... MACHINE TOOLS (INCLUDING PRESSES) FOR
WORKING METAL BY FORGING, HAMMERING, DIE-
CASTING, BENDING, FOLDING, FLATTENING,
WORKING METAL CARBIDES, NESOI.
846269....................... MACHINE TOOLS (INCLUDING PRESSES) FOR
WORKING METAL BY FORGING, HAMMERING, DIE-
CASTING, BENDING, FOLDING, FLATTENING,
WORKING METAL CARBIDES, NESOI.
846290....................... MACHINE TOOLS (INCLUDING PRESSES) FOR
WORKING METAL BY FORGING, HAMMERING, DIE-
CASTING, BENDING, FOLDING, FLATTENING,
WORKING METAL CARBIDES, NESOI.
846310....................... DRAW-BENCHES FOR BARS, TUBES, PROFILES,
WIRE OR THE LIKE FOR WORKING METAL
WITHOUT REMOVING MATERIAL.
846320....................... THREAD ROLLING MACHINES FOR WORKING METAL
WITHOUT REMOVING MATERIAL.
846330....................... MACHINES FOR WORKING WIRE WITHOUT
REMOVING MATERIAL.
846390....................... MACHINE TOOLS FOR WORKING METAL, SINTERED
METAL CARBIDES OR CERMETS, WITHOUT
REMOVING MATERIAL, NESOI.
846410....................... SAWING MACHINES FOR WORKING STONE,
CERAMICS, CONCRETE, ASBESTOS-CEMENT OR
LIKE MINERAL MATERIALS OR FOR COLD
WORKING GLASS.
846420....................... GRINDING OR POLISHING MACHINES FOR
WORKING STONE, CERAMICS, CONCRETE,
ASBESTOS-CEMENT OR LIKE MINERAL
MATERIALS OR FOR COLD WORKING GLASS.
846490....................... MACHINE TOOLS FOR WORKING STONE,
CERAMICS, CONCRETE, ASBESTOS-CEMENT OR
LIKE MINERAL MATERIALS OR FOR COLD
WORKING GLASS, NESOI.
846520....................... MACHINING CENTERS FOR WORKING CORK, BONE,
HARD RUBBER, HARD PLASTICS OR SIMILIAR
HARD MATERALS.
846593....................... GRINDING, SANDING OR POLISHING MACHINES
FOR WORKING WOOD, CORK, BONE, HARD
RUBBER, HARD PLASTICS OR SIMILAR HARD
MATERIALS.
846594....................... BENDING OR ASSEMBLING MACHINES FOR
WORKING WOOD, CORK, BONE, HARD RUBBER,
HARD PLASTICS OR SIMILAR HARD MATERIALS.
846596....................... SPLITTING, SLICING OR PARING MACHINES FOR
WORKING WOOD, CORK, BONE, HARD RUBBER,
HARD PLASTICS OR SIMILAR HARD MATERIALS.
846610....................... TOOL HOLDERS AND SELF-OPENING DIEHEADS
FOR MACHINES OR ANY TYPE OF TOOL FOR
WORKING IN THE HAND.
846620....................... WORK HOLDERS FOR MACHINE TOOLS.
846691....................... PARTS AND ACCESSORIES FOR MACHINE TOOLS
FOR WORKING STONE, CERAMICS, CONCRETE,
ASBESTOS-CEMENT OR LIKE MATERIALS OR FOR
COLD WORKING GLASS, NESOI.
846692....................... PARTS AND ACCESSORIES FOR MACHINE TOOLS
FOR WORKING WOOD, CORK, BONE, HARD
RUBBER, HARD PLASTICS OR SIMILAR HARD
MATERIALS, NESOI.
846693....................... PARTS AND ACCESSORIES FOR MACHINE TOOLS,
FOR LASER OPERATION, METALWORKING
MACHINING CENTERS, LATHES AND DRILLING
MACHINES, ETC., NESOI.
846694....................... PARTS AND ACCESSORIES FOR MACHINES TOOLS,
FOR FORGING, DIE-STAMPING, SHEARING,
ETC. METAL AND THOSE FOR WORKING METAL
WITHOUT REMOVING MATERIAL, NESOI.
846810....................... HAND-HELD BLOW TORCHES.
846820....................... GAS OPERATED MACHINERY AND APPARATUS FOR
SOLDERING, BRAZING OR WELDING, OTHER
THAN HAND-HELD BLOW TORCHES.
846880....................... MACHINERY AND APPARATUS FOR SOLDERING,
BRAZING OR WELDING, NESOI.
846890....................... PARTS OF MACHINERY AND APPARATUS FOR
SOLDERING, BRAZING OR WELDING, NESOI.
847210....................... DUPLICATING MACHINES.
847230....................... MACHINES FOR SORTING OR FOLDING MAIL, FOR
INSERTING MAIL IN ENVELOPES, OR FOR
OPENING OR SEALING MAIL AND MACHINES FOR
AFFIXING OR CANCELLING POSTAGE.
847321....................... PARTS AND ACCESSORIES FOR ELECTRONIC
CALCULATORS AND CALCULATING MACHINES.
847330....................... PARTS AND ACCESSORIES FOR AUTOMATIC DATA
PROCESSING MACHINES AND UNITS THEREOF,
MAGNETIC OR OPTICAL READERS,
TRANSCRIBING MACHINES, ETC., NESOI.
847410....................... MACHINES FOR SORTING, SCREENING,
SEPARATING OR WASHING EARTH, STONE, ORE
OR OTHER MINERAL SUBSTANCES, IN SOLID
FORM.
847431....................... CONCRETE OR MORTAR MIXERS.
847439....................... MACHINES FOR MIXING OR KNEADING EARTH,
STONE, ORE OR OTHER MINERAL SUBSTANCES
IN SOLID FORM, NESOI.
847480....................... MACHINERY FOR AGGLOMERATING ETC. SOLID
MINERAL FUELS, CERAMIC PASTE OR OTHER
MINERAL PRODUCTS; MACHINES FOR FORMING
FOUNDRY MOLDS OF SAND.
847521....................... MACHINES FOR MAKING OPTICAL FIBERS AND
PREFORMS THEREOF.
847529....................... MACHINES FOR MANUFACTURING OR HOT WORKING
GLASS OR GLASSWARE, NESOI.
847590....................... PARTS OF MACHINES FOR ASSEMBLING ELECTRIC
OR ELECTRONIC LAMPS, TUBES ETC., IN
GLASS ENVELOPES AND FOR MANUFACTURING OR
HOT WORKING GLASS OR GLASSWARE.
847730....................... BLOW-MOLDING MACHINES FOR WORKING RUBBER
OR PLASTIC.
847740....................... VACUUM-MOLDING MACHINES AND OTHER
THERMOFORMING MACHINES, FOR MOLDING OR
FORMING RUBBER OR PLASTICS.
847751....................... MACHINERY FOR MOLDING OR RETREADING
PNEUMATIC TIRES OR FOR MOLDING OR
OTHERWISE FORMING INNER TUBES.
847759....................... MACHINERY FOR MOLDING OR OTHERWISE
FORMING RUBBER OR PLASTICS, NESOI.
847790....................... PARTS OF MACHINERY FOR WORKING RUBBER OR
PLASTICS OR PARTS OF MACHINERY USED IN
THE MANUFACTURE OF PRODUCTS FROM RUBBER
OR PLASTICS MATERIALS, NESOI.
847910....................... MACHINERY FOR PUBLIC WORKS, BUILDING OR
THE LIKE.
847930....................... PRESSES FOR MANUFACTURING PARTICLE BOARD
OR FIBER BUILDING BOARD OF WOOD OR OTHER
LIGNEOUS MATERIALS AND OTHER MACHINERY
FOR TREATING WOOD OR CORK.
[[Page 12189]]
847950....................... INDUSTRIAL ROBOTS FOR MULTIPLE USES.
847981....................... MACHINES AND MECHANICAL APPLIANCES FOR
TREATING METAL, INCLUDING ELECTRIC WIRE
COIL-WINDERS.
847982....................... MACHINES AND MECHANICAL APPLIANCES FOR
MIXING, KNEADING, CRUSHING, GRINDING,
SCREENING, SIFTING, HOMOGENIZING,
EMULSIFYING OR STIRRING, NESOI.
847989....................... MACHINES AND MECHANICAL APPLIANCES HAVING
INDIVIDUAL FUNCTIONS, NESOI.
847990....................... PARTS OF MACHINES AND MECHANICAL
APPLIANCES HAVING INDIVIDUAL FUNCTIONS,
NESOI.
848020....................... MOLD BASES.
848030....................... MOLDING PATTERNS.
848060....................... MOLDS FOR MINERAL MATERIALS.
848110....................... PRESSURE-REDUCING VALVES.
848120....................... VALVES FOR OLEOHYDRAULIC OR PNEUMATIC
TRANSMISSIONS.
848130....................... CHECK VALVES.
848140....................... SAFETY OR RELIEF VALVES.
848210....................... BALL BEARINGS.
848220....................... TAPERED ROLLER BEARINGS, INCLUDING CONE
AND TAPERED ROLLER ASSEMBLIES.
848230....................... SPHERICAL ROLLER BEARINGS.
848240....................... NEEDLE ROLLER BEARINGS.
848250....................... CYLINDRICAL ROLLER BEARINGS NESOI.
848280....................... BALL OR ROLLER BEARINGS NESOI, INCLUDING
COMBINED BALL/ROLLER BEARINGS.
848291....................... BALLS, NEEDLES AND ROLLERS FOR BALL OR
ROLLER BEARINGS.
848299....................... PARTS OF BALL OR ROLLER BEARINGS, NESOI.
848310....................... TRANSMISSION SHAFTS (INCLUDING CAMSHAFTS
AND CRANKSHAFTS) AND CRANKS.
848320....................... HOUSED BEARINGS, INCORPORATING BALL OR
ROLLER BEARINGS.
848330....................... BEARING HOUSINGS; PLAIN SHAFT BEARINGS.
848340....................... GEARS AND GEARING (EXCEPT TOOTHED WHEELS,
CHAIN SPROCKETS, ETC.); BALL OR ROLLER
SCREWS; GEAR BOXES AND OTHER SPEED
CHANGERS, INCL TORQUE CONVERTERS.
848350....................... FLYWHEELS AND PULLEYS, INCLUDING PULLEY
BLOCKS.
848360....................... CLUTCHES AND SHAFT COUPLINGS (INCLUDING
UNIVERSAL JOINTS).
848390....................... TOOTHED WHEELS, CHAIN SPROCKETS AND OTHER
TRANSMISSION ELEMENTS PRESENTED
SEPARATELY; PARTS.
848410....................... GASKETS AND SIMILAR JOINTS OF METAL
SHEETING COMBINED WITH OTHER MATERIAL OR
OF TWO OR MORE LAYERS OF METAL.
848420....................... MECHANICAL SEALS.
848490....................... SETS OR ASSORTMENTS OF GASKETS AND
SIMILAR JOINTS, DISSIMILAR IN
COMPOSITION, PUT UP IN POUCHES,
ENVELOPES OR SIMILAR PACKINGS.
848520....................... MACHINERY FOR WORKING RUBBER OR PLASTICS
OR FOR THE MANUFACTURE OF PRODUCTS FROM
THESE MATERIALS, NESOI.
848530....................... MACHINES AND MECHANICAL APPLIANCES HAVING
INDIVIDUAL FUNCTIONS, NESOI.
848590....................... MACHINERY PARTS, NOT CONTAINING
ELECTRICAL CONNECTORS, INSULATORS,
COILS, CONTACTS OR OTHER ELECTRICAL
FEATURES, NESOI.
848610....................... MACHINES AND APPARATUS FOR THE
MANUFACTURE OF BOULES OR WAFERS.
848620....................... MACHINES AND APPARATUS FOR THE
MANUFACTURE OF SEMICONDUCTOR DEVICES OR
OF ELECTRONIC INTEGRATES CIRCUITS.
848630....................... MACHINES AND APPARATUS FOR THE
MANUFACTURE OF FLAT PANEL DISPLAYS.
848640....................... MACHINES AND APPARATUS SPECIFIED IN NOTE
9(C) TO CHAPTER 84.
848690....................... MACHINES AND APPARATUS OF A KIND USED FOR
THE MANUFACTURE OF SEMICONDUCTOR BOULES
OR WAFERS, ETC, PARTS AND ACCESSORITES.
848710....................... SHIPS' OR BOATS' PROPELLERS AND BLADES
THEREOF.
848790....................... MACHINERY PARTS, NON ELECTRIC, NESOI.
850120....................... UNIVERSAL AC/DC MOTORS OF AN OUTPUT
EXCEEDING 37.5 W.
850131....................... DC MOTORS NESOI AND GENERATORS OF AN
OUTPUT NOT EXCEEDING 750 W.
850133....................... DC MOTORS NESOI AND GENERATORS OF AN
OUTPUT EXCEEDING 75 KW BUT NOT EXCEEDING
375 KW.
850153....................... AC MOTORS NESOI, MULTI-PHASE, OF AN
OUTPUT EXCEEDING 75 KW.
850161....................... AC GENERATORS (ALTERNATORS), OF AN OUTPUT
NOT EXCEEDING 75 KVA.
850162....................... AC GENERATORS (ALTERNATORS), OF AN OUTPUT
EXCEEDING 75 KVA BUT NOT EXCEEDING 375
KVA.
850163....................... AC GENERATORS (ALTERNATORS), OF AN OUTPUT
EXCEEDING 375 KVA BUT NOT EXCEEDING 750
KVA.
850164....................... AC GENERATORS (ALTERNATORS), OF AN OUTPUT
EXCEEDING 750 KVA.
850211....................... GENERATING SETS WITH COMPRESSION-IGNITION
INTERNAL COMBUSTION PISTON (DIESEL OR
SEMI-DIESEL) ENGINES, OF AN OUTPUT NOT
EXCEEDING 75 KVA.
850212....................... GENERATING SETS WITH COMPRESSION-IGNITION
INTERNAL COMBUSTION PISTON (DIESEL ETC.)
ENGINES, OF AN OUTPUT EXCEEDING 75 KVA
NOT EXCEEDING 375 KVA.
850213....................... GENERATING SETS WITH COMPRESSION-IGNITION
INTERNAL COMBUSTION PISTON (DIESEL OR
SEMI-DIESEL) ENGINES, OF AN OUTPUT
EXCEEDING 375 KVA.
850220....................... GENERATING SETS WITH SPARK-IGNITION
INTERNAL COMBUSTION PISTON ENGINES.
850231....................... GENERATING SETS, ELECTRIC, WIND-POWERED.
850239....................... GENERATING SETS, ELECTRIC, NESOI.
850240....................... ELECTRIC ROTARY CONVERTERS.
850300....................... PARTS OF ELECTRIC MOTORS, GENERATORS,
GENERATING SETS AND ROTARY CONVERTERS.
850432....................... ELECTRICAL TRANSFORMERS NESOI, HAVING A
POWER HANDING CAPACITY EXCEEDING 1 KVA
BUT NOT EXCEEDING 16 KVA.
850433....................... ELECTRICAL TRANSFORMERS NESOI, HAVING A
POWER HANDING CAPACITY EXCEEDING 16 KVA
BUT NOT EXCEEDING 500 KVA.
850434....................... ELECTRICAL TRANSFORMERS NESOI, HAVING A
POWER HANDLING CAPACITY EXCEEDING 500
KVA.
850511....................... PERMANENT MAGNETS AND ARTICLES INTENDED
TO BECOME PERMANENT MAGNETS AFTER
MAGNETIZATION, MADE OF METAL.
850520....................... ELECTROMAGNETIC COUPLINGS, CLUTCHES AND
BRAKES.
850590....................... ELECTROMAGNETS; ELECTROMAGNETIC OR
PERMANENT MAGNET CHUCKS, CLAMPS AND
SIMILAR HOLDING DEVICES; AND PARTS OF
ELECTROMAGNETIC ARTICLES, NESOI.
850660....................... PRIMARY CELLS AND PRIMARY BATTERIES, AIR-
ZINC.
850690....................... PARTS OF PRIMARY CELLS AND PRIMARY
BATTERIES.
850710....................... LEAD-ACID STORAGE BATTERIES OF A KIND
USED FOR STARTING PISTON ENGINES.
850720....................... LEAD-ACID STORAGE BATTERIES NESOI.
850730....................... NICKEL-CADMIUM STORAGE BATTERIES.
851110....................... INTERNAL COMBUSTION ENGINE SPARK PLUGS.
851120....................... INTERNAL COMBUSTION ENGINE IGNITION
MAGNETOS, MAGNETO-DYNAMOS AND MAGNETIC
FLYWHEELS.
851130....................... INTERNAL COMBUSTION ENGINE DISTRIBUTORS
AND IGNITION COILS.
851140....................... INTERNAL COMBUSTION ENGINE STARTER MOTORS
AND DUAL PURPOSE STARTER-GENERATORS.
851150....................... INTERNAL COMBUSTION ENGINE GENERATORS,
NESOI.
851180....................... ELECTRICAL IGNITION OR STARTING EQUIPMENT
USED FOR INTERNAL COMBUSTION ENGINES,
NESOI, AND EQUIPMENT USED IN CONJUNCTION
WITH SUCH ENGINES, NESOI.
[[Page 12190]]
851190....................... PARTS FOR ELECTRICAL IGNITION OR STARTING
EQUIPMENT USED FOR INTERNAL COMBUSTION
ENGINES; PARTS FOR GENERATORS AND CUT-
OUTS USED WITH SUCH EQUIPMENT.
851220....................... ELECTRICAL LIGHTING OR VISUAL SIGNALING
EQUIPMENT, FOR USE ON CYCLES OR MOTOR
VEHICLES, EXCEPT FOR USE ON BICYCLES.
851290....................... PARTS OF ELECTRICAL LIGHTING OR SIGNALING
EQUIPMENT, WINDSHIELD WIPERS, DEFROSTERS
AND DEMISTERS, USED FOR CYCLES OR MOTOR
VEHICLES.
851411....................... INDUSTRIAL OR LABORATORY ELECTRIC
FURNACES AND OVENS, RESISTANCE TYPE.
851419....................... INDUSTRIAL OR LABORATORY ELECTRIC
FURNACES AND OVENS, RESISTANCE TYPE.
851420....................... INDUSTRIAL OR LABORATORY ELECTRIC
FURNACES AND OVENS, INDUCTION OR
DIELECTRIC TYPE.
851431....................... INDUSTRIAL OR LABORATORY ELECTRIC
FURNACES AND OVENS, NESOI.
851432....................... INDUSTRIAL OR LABORATORY ELECTRIC
FURNACES AND OVENS, NESOI.
851439....................... INDUSTRIAL OR LABORATORY ELECTRIC
FURNACES AND OVENS, NESOI.
851490....................... PARTS FOR INDUSTRIAL OR LABORATORY
ELECTRIC FURNACES AND OVENS; PARTS FOR
INDUSTRIAL OR LABORATORY INDUCTION OR
DIELECTRIC HEATING EQUIPMENT, NESOI.
851511....................... ELECTRIC SOLDERING IRONS AND GUNS.
851519....................... ELECTRIC BRAZING OR SOLDERING MACHINES OR
APPARTAUS, NESOI.
851521....................... ELECTRIC MACHINES AND APPARATUS FOR
RESISTANCE WELDING OF METAL, FULLY OR
PARTY AUTOMATIC.
851529....................... ELECTRIC MACHINES AND APPARATUS FOR
RESISTANCE WELDING OF METAL, OTHER THAN
FULLY OR PARTLY AUTOMATIC.
851621....................... ELECTRIC STORAGE HEATING RADIATORS.
851680....................... ELECTRIC HEATING RESISTORS.
851771....................... PARTS OF TELEPHONE SETS AND OTHER
APPARATUS FOR THE TRANSMISSION OR
RECEPTION OF VOICE, IMAGES OR OTHER
DATA.
851779....................... PARTS OF TELEPHONE SETS AND OTHER
APPARATUS FOR THE TRANSMISSION OR
RECEPTION OF VOICE, IMAGES OR OTHER
DATA.
852351....................... SOLID-STATE NON-VOLATILE SEMICONDUCTOR
STORAGE DEVICES.
852550....................... TRANSMISSION APPARATUS FOR RADIO-
BROADCASTING OR TELEVISION.
852581....................... TELEVISION CAMERAS, DIGITAL CAMERAS AND
VIDEO CAMERA RECORDERS.
852582....................... TELEVISION CAMERAS, DIGITAL CAMERAS AND
VIDEO CAMERA RECORDERS.
852583....................... TELEVISION CAMERAS, DIGITAL CAMERAS AND
VIDEO CAMERA RECORDERS.
852589....................... TELEVISION CAMERAS, DIGITAL CAMERAS AND
VIDEO CAMERA RECORDERS.
852610....................... RADAR APPARATUS.
852692....................... RADIO REMOTE CONTROL APPARATUS.
852721....................... RADIOBROADCAST RECEIVERS FOR MOTOR
VEHICLES, COMBINED WITH SOUND RECORDING
OR REPRODUCING APPARATUS, NOT CAPABLE OF
OPERATING WITHOUT OUTSIDE POWER.
852849....................... CATHODE-RAY TUBE MONITORS, NOT
INCORPORATING TELEVISION RECEPTION
APPARATUS, NESOI.
852910....................... ANTENNAS AND ANTENNA REFLECTORS AND PARTS
THEREOF.
853010....................... ELECTRICAL SIGNALING, SAFETY OR TRAFFIC
CONTROL EQUIPMENT FOR RAILWAYS,
STREETCAR LINES OR SUBWAYS.
853080....................... ELECTRICAL SIGNALING, SAFETY OR TRAFFIC
CONTROL EQUIPMENT FOR ROADS, INLAND
WATERWAYS, PARKING FACILITIES, PORT
INSTALLATIONS OR AIRFIELDS.
853090....................... PARTS FOR ELECTRICAL SIGNALING, SAFETY OR
TRAFFIC CONTROL EQUIPMENT FOR RAIL
LINES, ROADS, WATERWAYS, PARKING AREAS,
PORT INSTALLATIONS OR AIRFIELDS.
853210....................... FIXED CAPACITORS, DESIGNED FOR USE IN 50/
60 HZ CIRCUITS, WITH REACTIVE POWER
CAPACITY NOT LESS THAN 0.5 KVAR (POWER
CAPACITORS).
853221....................... TANTALUM CAPACITORS.
853224....................... FIXED CAPACITORS NESOI, MULTILAYER
CERAMIC DIELECTRIC.
853229....................... FIXED CAPACITORS, NESOI.
853230....................... VARIABLE OR ADJUSTABLE (PRE-SET)
CAPACITORS.
853290....................... PARTS FOR ELECTRICAL CAPACITORS.
853329....................... FIXED RESISTORS, NESOI, FOR A POWER
HANDLING CAPACITY EXCEEDING 20 W.
853390....................... PARTS FOR ELECTRICAL RESISTORS, INCLUDING
PARTS FOR RHEOSTATS AND POTENTIOMETERS.
853400....................... PRINTED CIRCUITS.
853510....................... FUSES FOR ELECTRICAL APPARATUS FOR A
VOLTAGE EXCEEDING 1,000 V.
853521....................... AUTOMATIC CIRCUIT BREAKERS FOR A VOLTAGE
EXCEEDING 1,000 V BUT LESS THAN 72.5 KV.
853529....................... AUTOMATIC CIRCUIT BREAKERS FOR A VOLTAGE
OF 72.5 KV OR MORE.
853530....................... ISOLATING SWITCHES AND MAKE-AND-BREAK
SWITCHES FOR A VOLTAGE EXCEEDING 1,000
V.
853540....................... LIGHTNING ARRESTERS, VOLTAGE LIMITERS,
AND SURGE SUPPRESSORS FOR A VOLTAGE
EXCEEDING 1,000 V.
853590....................... ELECTRICAL APPARATUS FOR SWITCHING,
PROTECTING OR MAKING CONNECTIONS TO OR
IN ELECTRICAL CIRCUITS, FOR A VOLTAGE
EXCEEDING 1,000 V, NESOI.
853650....................... ELECTRICAL SWITCHES FOR A VOLTAGE NOT
EXCEEDING 1,000 V, NESOI.
853669....................... ELECTRICAL PLUGS AND SOCKETS FOR A
VOLTAGE NOT EXCEEDING 1,000 V.
853690....................... ELECTRICAL APPARATUS FOR SWITCHING,
PROTECTING OR MAKING CONNECTIONS TO OR
IN ELECTRICAL CIRCUITS, FOR A VOLTAGE
NOT EXCEEDING 1,000 V, NESOI.
853710....................... BOARDS, PANELS, CONSOLES, ETC. WITH
ELECTRICAL APPARATUS, FOR ELECTRIC
CONTROL OR DISTRIBUTION OF ELECTRICITY,
FOR A VOLTAGE NOT EXCEEDING 1,000 V.
853810....................... BOARDS, PANELS, CONSOLES, DESKS,
CABINETS, AND OTHER BASES FOR ELECTRIC
CONTROL ETC. EQUIPMENT, NOT EQUIPPED
WITH ELECTRICAL APPARATUS.
853890....................... PARTS FOR ELECTRICAL APPARATUS FOR
ELECTRICAL CIRCUITS, BOARDS, PANELS ETC.
FOR ELECTRIC CONTROL OR DISTRIBUTION OF
ELECTRICITY, NESOI.
853929....................... ELECTRIC FILAMENT LAMPS, NESOI.
853939....................... ELECTRIC DISCHARGE LAMPS (OTHER THAN
ULTRAVIOLET OR FLUORESCENT, HOT CATHODE
LAMPS), NESOI.
853941....................... ARC LAMPS.
853951....................... ELECTRIC LAMPS AND LIGHTING FITTINGS,
NESOI.
853952....................... LIGHT-EMITTING DIODE (LED) LAMPS.
854020....................... TELEVISION CAMERA TUBES; IMAGE CONVERTERS
AND INTENSIFIERS; OTHER PHOTOCATHODE
TUBES.
854060....................... CATHODE-RAY TUBES, N.E.S.O.I.
854071....................... MAGNETRON MICROWAVE TUBES.
854079....................... MICROWAVE TUBES, NESOI.
854081....................... RECEIVER OR AMPLIFIER TUBES.
854089....................... THERMIONIC AND OTHER CATHODE TUBES,
NESOI.
854091....................... PARTS OF CATHODE-RAY TUBES.
854099....................... PARTS OF CATHODE TUBES, NESOI.
854110....................... DIODES, OTHER THAN PHOTOSENSITIVE OR
LIGHT-EMITTING DIODES.
854121....................... TRANSISTORS, OTHER THAN PHOTOSENSITIVE,
WITH A DISSIPATION RATE OF LESS THAN 1
W.
[[Page 12191]]
854129....................... TRANSISTORS, OTHER THAN PHOTOSENSITIVE,
NESOI.
854130....................... THYRISTORS, DIACS AND TRIACS, OTHER THAN
PHOTOSENSITIVE DEVICES.
854141....................... PHOTOSENSITIVE SEMICONDUCTOR DEVICES,
INCLUDING PHOTOVOLTAIC CELLS; LIGHT-
EMITTING DIODES.
854142....................... PHOTOSENSITIVE SEMICONDUCTOR DEVICES,
INCLUDING PHOTOVOLTAIC CELLS; LIGHT-
EMITTING DIODES.
854143....................... PHOTOSENSITIVE SEMICONDUCTOR DEVICES,
INCLUDING PHOTOVOLTAIC CELLS; LIGHT-
EMITTING DIODES.
854149....................... PHOTOSENSITIVE SEMICONDUCTOR DEVICES,
INCLUDING PHOTOVOLTAIC CELLS; LIGHT-
EMITTING DIODES.
854151....................... SEMICONDUCTOR DEVICES, EXCEPT
PHOTOSENSITIVE AND PHOTOVOLTAIC CELLS,
NESOI.
854159....................... SEMICONDUCTOR DEVICES, EXCEPT
PHOTOSENSITIVE AND PHOTOVOLTAIC CELLS,
NESOI.
854160....................... MOUNTED PIEZOELECTRIC CRYSTALS.
854190....................... PARTS FOR DIODES, TRANSISTORS AND SIMILAR
SEMICONDUCTOR DEVICES; PARTS FOR
PHOTOSENSITIVE SEMICONDUCTOR DEVICES AND
MOUNTED PIEZOELECTRIC CRYSTALS.
854231....................... PROCESSORS AND CONTROLLERS, ELECTRONIC
INTEGRATED CIRCUITS.
854232....................... MEMORIES, ELECTRONIC INTEGRATED CIRCUITS.
854233....................... AMPLIFIERS, ELECTRONIC INTEGRATED
CIRCUITS.
854239....................... ELECTRONIC INTEGRATED CIRCUITS, NESOI.
854290....................... PARTS FOR ELECTRONIC INTEGRATED CIRCUITS
AND MICROASSEMBLIES.
854310....................... PARTICLE ACCELERATORS.
854320....................... ELECTRICAL SIGNAL GENERATORS.
854330....................... ELECTRICAL MACHINES AND APPARATUS FOR
ELECTROPLATING, ELECTROLYSIS OR
ELECTROPHORESIS.
854370....................... ELECTRICAL MACHINES AND APPARATUS, HAVING
INDIVIDUAL FUNCTIONS, NESOI.
854411....................... INSULATED WINDING WIRE OF COPPER.
854430....................... INSULATED IGNITION WIRING SETS AND OTHER
WIRING SETS FOR VEHICLES, AIRCRAFT AND
SHIPS.
854449....................... INSULATED ELECTRIC CONDUCTORS, FOR A
VOLTAGE NOT EXCEEDING 80 V, NOT FITTED
WITH CONNECTORS.
854460....................... INSULATED ELECTRIC CONDUCTORS, FOR A
VOLTAGE EXCEEDING 1,000 V.
854470....................... INSULATED OPTICAL FIBER CABLES, MADE UP
OF INDIVIDUALLY SHEATHED FIBERS.
854520....................... ELECTRICAL CARBON OR GRAPHITE BRUSHES.
854710....................... INSULATING FITTINGS OF CERAMICS, FOR
ELECTRICAL MACHINES OR APPLIANCES.
854720....................... INSULATING FITTINGS OF PLASTICS, FOR
ELECTRICAL MACHINES OR APPLIANCES.
854790....................... INSULATING FITTINGS NESOI, FOR ELECTRICAL
MACHINES OR APPLIANCES; ELECTRICAL
CONDUIT TUBING AND JOINTS, OF BASE METAL
LINED WITH INSULATING MATERIAL.
854800....................... ELECTRICAL PARTS OF MACHINERY OR
APPARATUS, NESOI.
854911....................... WASTE AND SCRAP OF PRIMARY CELLS, PRIMARY
BATTERIES AND ELECTRIC STORAGE
BATTERIES; SPENT PRIMARY CELLS, SPENT
PRIMARY AND ELECTRIC STORAGE BATTERIES.
854912....................... WASTE AND SCRAP OF PRIMARY CELLS, PRIMARY
BATTERIES AND ELECTRIC STORAGE
BATTERIES; SPENT PRIMARY CELLS, SPENT
PRIMARY AND ELECTRIC STORAGE BATTERIES.
854913....................... WASTE AND SCRAP OF PRIMARY CELLS, PRIMARY
BATTERIES AND ELECTRIC STORAGE
BATTERIES; SPENT PRIMARY CELLS, SPENT
PRIMARY AND ELECTRIC STORAGE BATTERIES.
854914....................... WASTE AND SCRAP OF PRIMARY CELLS, PRIMARY
BATTERIES AND ELECTRIC STORAGE
BATTERIES; SPENT PRIMARY CELLS, SPENT
PRIMARY AND ELECTRIC STORAGE BATTERIES.
854919....................... WASTE AND SCRAP OF PRIMARY CELLS, PRIMARY
BATTERIES AND ELECTRIC STORAGE
BATTERIES; SPENT PRIMARY CELLS, SPENT
PRIMARY AND ELECTRIC STORAGE BATTERIES.
854921....................... MUNICIPAL WASTE.
854929....................... WASTE AS SPECIFIED IN CHAPTER 38 NOTES,
NESOI.
854931....................... CULLET AND OTHER WASTE AND SCRAP OF
GLASS; GLASS IN THE MASS.
854939....................... WASTE AND SCRAP OF PRECIOUS METAL, NESOI.
854991....................... CULLET AND OTHER WASTE AND SCRAP OF
GLASS; GLASS IN THE MASS.
854999....................... WASTE AND SCRAP OF PRECIOUS METAL, NESOI.
860110....................... RAIL LOCOMOTIVES POWERED FROM AN EXTERNAL
SOURCE OF ELECTRICITY.
860290....................... RAIL LOCOMOTIVES, NESOI; LOCOMOTIVE
TENDERS.
860400....................... RAILWAY OR TRAMWAY MAINTENANCE OR SERVICE
VEHICLES, WHETHER OR NOT SELF-PROPELLED
(FOR EXAMPLE, WORKSHOPS, CRANES, BALLAST
TAMPERS, TRACKLINERS, ETC.).
860692....................... RAILWAY OR TRAMWAY FREIGHT CARS, OPEN,
WITH NON-REMOVABLE SIDES OF A HEIGHT
EXCEEDING 60 CM, NOT SELF-PROPELLED,
NESOI.
870310....................... PASSENGER MOTOR VEHICLES SPECIALLY
DESIGNEED FOR TRAVELING ON SNOW; GOLF
CARTS AND SIMILAR VEHICLES.
870410....................... DUMPERS (DUMP TRUCKS) DESIGNED FOR OFF-
HIGHWAY USE.
870421....................... MOTOR VEHICLES FOR GOODS TRANSPORT NESOI,
WITH COMPRESSION-IGNITION INTERNAL
COMBUSTION PISTON ENGINE (DIESEL), GVW
NOT OVER 5 METRIC TONS.
870422....................... MOTOR VEHICLES FOR GOODS TRANSPORT NESOI,
WITH COMPRESSION-IGNITION INTERNAL
COMBUSTION PISTON ENGINE (DIESEL), GVW
OVER 5 BUT NOT OVER 20 METRIC TONS.
870423....................... MOTOR VEHICLES FOR GOODS TRANSPORT NESOI,
WITH COMPRESSION-IGNITION INTERNAL
COMBUSTION PISTON ENGINE (DIESEL), GVW
OVER 20 METRIC TONS.
870432....................... MOTOR VEHICLES FOR GOODS TRANSPORT NESOI,
WITH SPARK-IGNITION INTERNAL COMBUSTION
PISTON ENGINE, GVW OVER 5 METRIC TONS.
870510....................... MOBILE CRANES.
870540....................... CONCRETE MIXERS, SPECIAL PURPOSE
VEHICLES.
870590....................... SPECIAL PURPOSE VEHICLES, OTHER THAN
THOSE PRINCIPALLY DESIGNED FOR THE
TRANSPORT OF PERSONS OR GOODS, NESOI.
870911....................... WORKS TRUCKS (NOT LIFTING OR HANDLING)
USED IN FACTORIES ETC. AND TRACTORS USED
ON RAILWAY STATION PLATFORMS,
ELECTRICAL.
870990....................... PARTS FOR WORKS TRUCKS (NOT LIFTING OR
HANDLING) USED IN FACTORIES ETC. AND
PARTS OF TRACTORS OF THE TYPE USED ON
RAILWAY STATION PLATFORMS.
871620....................... SELF-LOADING OR SELF-UNLOADING TRAILERS
AND SEMI-TRAILERS FOR AGRICULTURAL
PURPOSES.
871639....................... TRAILERS AND SEMI-TRAILERS FOR THE
TRANSPORT OF GOODS, NESOI.
871690....................... PARTS OF TRAILERS, SEMI-TRAILERS AND
OTHER VEHICLES, NOT MECHANICALLY
PROPELLED.
900110....................... OPTICAL FIBERS, OPTICAL FIBER BUNDLES AND
CABLES, OTHER THAN OPTICAL FIBER CABLES
MADE UP OF INDIVIDUALLY SHEATHED FIBERS.
900510....................... BINOCULARS.
900580....................... MONOCULARS, OTHER OPTICAL TELESCOPES AND
MOUNTINGS; OTHER ASTRONOMICAL
INSTRUMENTS AND MOUNTINGS, EXCLUDING
INSTRUMENTS FOR RADIO-ASTRONOMY.
900590....................... PARTS AND ACCESSORIES (INCLUDING
MOUNTINGS) OF BINOCULARS, MONOCULARS,
OTHEROTHER OPTICAL TELECOPES AND
ASTRONOMICAL INSTRUMENTS NESOI.
900630....................... CAMERAS DESIGNED FOR UNDERWATER USE, FOR
AERIAL SURVEY, OR MEDICAL/SURGICAL
EXAMINATION OF INTERNAL ORGANS; CAMERAS
FOR FORENSIC OR CRIMINOLOGICAL USE.
[[Page 12192]]
900640....................... INSTANT PRINT CAMERAS.
900653....................... CAMERAS (STILL) NESOI, FOR ROLL FILM OF A
WIDTH OF 35 MM (1.4 INCH).
900659....................... PHOTOGRAPHIC CAMERAS (OTHER THAN
CINEMATOGRAPHIC), NESOI.
900661....................... PHOTOGRAPHIC DISCHARGE LAMP (ELECTRONIC)
FLASHLIGHT APPARATUS.
900669....................... PHOTOGRAPHIC FLASHLIGHT APPARATUS, NESOI.
900691....................... PARTS AND ACCESSORIES FOR PHOTOGRAPHIC
(OTHER THAN CINEMATOGRAPHIC) CAMERAS.
900699....................... PARTS AND ACCESSORIES FOR PHOTOGRAPHIC
FLASHLIGHT APPARATUS AND FLASHBULBS,
NESOI.
901010....................... PHOTOGRAPHIC EQUIPMENT FOR THE AUTOMATIC
DEVELOPMENT OF FILM OR PAPER IN ROLLS OR
AUTOMATICALLY EXPOSING DEVELOPED FILM TO
ROLLS OF PHOTOGRAPHIC PAPER.
901380....................... OPTICAL DEVICES, APPLIANCES AND
INSTRUMENTS, NESOI.
901410....................... DIRECTION FINDING COMPASSES.
901420....................... INSTRUMENTS AND APPLIANCES FOR
AERONAUTICAL OR SPACE NAVIGATION (OTHER
THAN COMPASSES).
901480....................... NAVIGATIONAL INSTRUMENTS AND APPLIANCES,
NESOI.
901490....................... PARTS AND ACCESSORIES FOR DIRECTION
FINDING COMPASSES AND OTHER NAVIGATIONAL
INSTRUMENTS AND APPLIANCES.
901510....................... RANGEFINDERS.
901520....................... THEODOLITES AND TACHYOMETERS.
901540....................... PHOTOGRAMMETRICAL SURVEYING INSTRUMENTS
AND APPLIANCES.
901580....................... SURVEYING INSTRUMENTS AND APPLIANCES,
NESOI, HYDROGRAPHIC, OCEANOGRAPHIC,
HYDROLOGICAL, METEOROLOGICAL OR
GEOPHYSICAL INSTRUMENTS AND APPLIANCES
NESOI.
901590....................... PARTS ETC. FOR RANGEFINDERS AND
SURVEYING, HYDROGRAPHIC, OCEAN OGRAPHIC,
HYDROLOGICAL, METEOROLOGICAL OR
GEOPHYSICAL INSTRUMENTS AND APPLIANCES
NESOI.
902480....................... MACHINES AND APPLIANCES NESOI FOR TESTING
THE HARDNESS, STRENGTH, COMPRESSIBILITY,
ELASTICITY OR OTHER SPECIFIC PROPERTIES
OF MATERIALS.
902519....................... THERMOMETERS AND PYROMETERS, NOT COMBINED
WITH OTHER INSTRUMENTS, NESOI.
902590....................... PARTS AND ACCESSORIES FOR HYDROMETERS AND
SIMILAR FLOATING INSTRUMENTS,
THERMOMETERS, PYROMETERS, BAROMETERS,
HYGROMETERS AND PSYCHROMETERS.
902610....................... INSTRUMENTS AND APPARATUS FOR MEASURING
OR CHECKING THE FLOW OR LEVEL OF
LIQUIDS, NESOI.
902620....................... INSTRUMENTS AND APPARATUS FOR MEASURING
OR CHECKING PRESSURE OF LIQUIDS OR
GASES, NESOI.
902680....................... INSTRUMENTS AND APPARATUS FOR MEASURING
OR CHECKING OTHER VARIABLES OF LIQUIDS
OR GASES, NESOI.
902690....................... PARTS AND ACCESSORIES FOR INSTRUMENTS AND
APPARATUS FOR MEASURING OR CHECKING THE
FLOW, LEVEL, PRESSURE OR OTHER VARIABLES
OF LIQUIDS OR GASES, NESOI.
902710....................... GAS OR SMOKE ANALYSIS APPARATUS.
902781....................... INSTRUMENTS AND APPARATUS FOR PHYSICAL OR
CHEMICAL ANALYSIS, NESOI.
902789....................... INSTRUMENTS AND APPARATUS FOR PHYSICAL OR
CHEMICAL ANALYSIS, NESOI.
902910....................... REVOLUTION COUNTERS, PRODUCTION COUNTERS,
TAXIMETERS, ODOMETERS, PEDOMETERS AND
THE LIKE.
902920....................... SPEEDOMETERS AND TACHOMETERS;
STROBOSCOPES.
902990....................... PARTS AND ACCESSORIES FOR REVOLUTION
COUNTERS, PRODUCTION COUNTERS,
TAXIMETERS, ODOMETERS, PEDOMETERS ETC.,
SPEEDOMETERS, TACHOMETERS AND
STROBOSOPES.
903032....................... MULTIMETERS WITH A RECORDING DEVICE.
903039....................... INSTRUMENTS AND APPARATUS FOR MEASURING
OR CHECKING VOLTAGE, CURRENT, RESISTANCE
OR POWER, WITHOUT A RECORDING DEVICE
(EXCLUDING MULTIMETERS), NESOI.
903040....................... INSTRUMENTS AND APPARATUS NESOI,
SPECIALLY DESIGNED FOR
TELECOMMUNICATIONS (FOR EXAMPLE, CROSS-
TALK METERS, GAIN MEASURING INSTRUMENTS
ETC.).
903082....................... INST & APP W/A RECORDING DEVICE DESIGNED
TO CHECK OR MEASURE SEMICONDUCTOR WAFERS
& DEVICES (SUCH AS PROBE TESTERS,
RESISTIVITY CHECKERS, LOGIC ANALYZERS.
903089....................... INSTRUMENTS AND APPARATUS NESOI, WITHOUT
A RECORDING DEVICE FOR MEASURING OR
CHECKING ELECTRICAL QUANTITIES.
903120....................... TEST BENCHES.
903149....................... MEASURING OR CHECKING INSTRUMENTS,
APPLIANCES AND MACHINES, N.E.S.O.I.
903180....................... MEASURING OR CHECKING INSTRUMENTS,
APPLIANCES AND MACHINES, NESOI.
903281....................... HYDRAULIC OR PNEUMATIC AUTOMATIC
REGULATING OR CONTROLLING INSTRUMENTS
AND APPARATUS.
903289....................... AUTOMATIC REGULATING OR CONTROLLING
INSTRUMENTS AND APPARATUS (EXCLUDING
THERMOSTATS, MANOSTATS AND HYDRAULIC
TYPES), NESOI.
------------------------------------------------------------------------
0
10. Supplement No. 5 to part 746 is amended by:
0
a. Revising the heading of the supplement; and
0
b. Adding in numerical order the following entries to the table:
``8407100020,'' ``8407100040,'' ``8407100060,'' ``8407100090,''
``8407310000,'' ``8407322000,'' ``8407325000,'' ``8407332000,''
``8407335000,'' ``8407342030,'' ``8407342090,'' ``8407345000,''
``8407901010,'' ``8407901050,'' ``8407909010,'' ``8407909030,''
``8407909050,'' ``8408100030,'' ``8408100040,'' ``8408100050,''
``8408202000,'' ``8408205000,'' ``8408901000,'' ``8408909010,''
``8408909020,'' ``8408909030,'' ``8408909040,'' ``8408909050,''
``8409100040,'' ``8409100080,'' ``8409914000,'' ``8409918000,''
``8409994000,'' ``8409996000,'' ``8409998000,'' ``8411114010,''
``8411114050,'' ``8411118000,'' ``8411124010,'' ``8411124050,''
``8411128000,'' ``8411214010,'' ``8411214050,'' ``8411218000,''
``8411224010,'' ``8411224050,'' ``8411228000,'' ``8411814010,''
``8411814050,'' ``8411818000,'' ``8411824010,'' ``8411824050,''
``8411828000,'' ``8411914000,'' ``8411917010,'' ``8411917050,''
``8411994000,'' ``8411997010,'' ``8411997050,'' ``8414510010,''
``8414510090,'' ``8414593000,'' ``8414596040,'' ``8414599080,''
``8414600000,'' ``8415103040,'' ``8415103060,'' ``8415103080,''
``8415106000,'' ``8415109000,'' ``8418100010,'' ``8418100020,''
``8418100030,'' ``8418100040,'' ``8418100090,'' ``8418210010,''
``8418210020,'' ``8418210030,'' ``8418210090,'' ``8418291000,''
``8418292000,'' ``8418300000,'' ``8418400000,'' ``8419815000,''
``8419819040,'' ``8419819080,'' ``8422110000,'' ``8423100010,''
``8423100050,'' ``8428600000,'' ``8431390010,'' ``8431390090,''
``8443120000,'' ``8443310000,'' ``8443321010,'' ``8443321020,''
``8443321030,'' ``8443321040,'' ``8443321050,'' ``8443321060,''
``8443321070,'' ``8443321080,'' ``8443321090,'' ``8443325000,''
``8443391000,'' ``8443392000,'' ``8443393000,'' ``8443394000,''
``8443395000,'' ``8443396000,'' ``8443399000,'' ``8450110010,''
``8450110090,'' ``8450120000,'' ``8450190000,'' ``8451210010,''
[[Page 12193]]
``8451210090,'' ``8452100000,'' ``8470100000,'' ``8470210000,''
``8470290000,'' ``8470300000,'' ``8471410110,'' ``8471410150,''
``8471490000,'' ``8471500110,'' ``8471500150,'' ``8471601010,''
``8471601050,'' ``8471602000,'' ``8471607000,'' ``8471608000,''
``8471609030,'' ``8471609050,'' ``8471701000,'' ``8471702000,''
``8471703000,'' ``8471704035,'' ``8471704065,'' ``8471704095,''
``8471705035,'' ``8471705065,'' ``8471705095,'' ``8471706000,''
``8471709000,'' ``8471801000,'' ``8471804000,'' ``8471809000,''
``8471900000,'' ``8472900500,'' ``8472901000,'' ``8472905000,''
``8472909002,'' ``8479600000,'' ``8483101020,'' ``8483101050,''
``8483103010,'' ``8483103050,'' ``8483105000,'' ``8483200010,''
``8483200050,'' ``8483305020,'' ``8483305040,'' ``8483308055,''
``8483308065,'' ``8483308070,'' ``8483308090,'' ``8483401000,''
``8483404010,'' ``8483404050,'' ``8483407000,'' ``8483408000,''
``8483409000,'' ``8483508030,'' ``8483508080,'' ``8483604000,''
``8483608000,'' ``8483901000,'' ``8483905000,'' ``8483908010,''
``8483909500,'' ``8508110000,'' ``8508190000,'' ``8508600000,''
``8509801000,'' ``8509802000,'' ``8509805040,'' ``8509805060,''
``8509805091,'' ``8511100000,'' ``8511200000,'' ``8511300040,''
``8511300080,'' ``8511400000,'' ``8511500000,'' ``8511802000,''
``8511804000,'' ``8511806000,'' ``8511906020,'' ``8511908000,''
``8512202000,'' ``8512204000,'' ``8512300030,'' ``8512300050,''
``8512402000,'' ``8512404000,'' ``8516310000,'' ``8516500000,''
``8516604000,'' ``8516606000,'' ``8516710000,'' ``8516720000,''
``8516790000,'' ``8517110000,'' ``8517130000,'' ``8517180000,''
``8517610000,'' ``8517620010,'' ``8517620050,'' ``8517690000,''
``8519200000,'' ``8519301000,'' ``8519302000,'' ``8519811000,''
``8519812000,'' ``8519812500,'' ``8519813000,'' ``8519814105,''
``8519814110,'' ``8519814120,'' ``8519814150,'' ``8519891000,''
``8519892000,'' ``8519893000,'' ``8521100000,'' ``8521900000,''
``8526910010,'' ``8526910030,'' ``8526910070,'' ``8527120000,''
``8527131100,'' ``8527132000,'' ``8527134000,'' ``8527136000,''
``8527190000,'' ``8527210000,'' ``8527290000,'' ``8527910000,''
``8527920000,'' ``8527993005,'' ``8527993060,'' ``8527995030,''
``8528710000,'' ``8528723000,'' ``8528726005,'' ``8528726010,''
``8528726040,'' ``8528726057,'' ``8529102020,'' ``8529102050,''
``8529102090,'' ``8529104000,'' ``8529109000,'' ``8531100015,''
``8531100025,'' ``8531100035,'' ``8531100045,'' ``8543702000,''
``8543704000,'' ``8543706000,'' ``8543707100,'' ``8543708000,''
``8543708500,'' ``8543709610,'' ``8543709620,'' and ``8544300000.''
The additions read as follows:
Supplement No. 5 to Part 746--`Luxury Goods' Sanctions for Russia and
Belarus Pursuant to Sec. 746.10(a)(1) and (2)
* * * * *
----------------------------------------------------------------------------------------------------------------
10-Digit commodity description and per
Schedule B 2-Digit chapter heading unit wholesale price in the U.S. if
applicable
----------------------------------------------------------------------------------------------------------------
* * * * * * *
8407100020.............................. Nuclear reactors, boilers, SPARK-IGNITION RECIPROCATING OR ROTARY
machinery and mechanical INTERNAL COMBUSTION PISTON ENGINES FOR
appliances; parts thereof. CIVIL AIRCRAFT, NEW, LESS THAN 373 KW,
VALUED AT $750 PER UNIT WHOLESALE PRICE
IN THE US.\1\
8407100040.............................. Nuclear reactors, boilers, SPARK-IGNITION RECIPROCATING OR ROTARY
machinery and mechanical INTERNAL COMBUSTION PISTON ENGINES FOR
appliances; parts thereof. CIVIL AIRCRAFT, NEW, 373 KW OR OVER,
VALUED AT $500 PER UNIT WHOLESALE PRICE
IN THE US.\1\
8407100060.............................. Nuclear reactors, boilers, SPARK-IGNITION RECIPROCATING OR ROTARY
machinery and mechanical INTERNAL COMBUSTION PISTON ENGINES FOR
appliances; parts thereof. CIVIL AIRCRAFT, USED OR REBUILT, VALUED
AT $300 PER UNIT WHOLESALE PRICE IN THE
US.\1\
8407100090.............................. Nuclear reactors, boilers, SPARK-IGNITION RECIPROCATING OR ROTARY
machinery and mechanical INTERNAL COMBUSTION PISTON TYPE AIRCRAFT
appliances; parts thereof. ENGINES, EXCEPT CIVIL AIRCRAFT USE,
VALUED AT $300 PER UNIT WHOLESALE PRICE
IN THE US.\1\
* * * * * * *
8407310000.............................. Nuclear reactors, boilers, SPARK-IGNITION RECIPROCATING PISTON
machinery and mechanical ENGINES OF A KIND USED FOR THE
appliances; parts thereof. PROPULSION OF VEHICLES OF CHAPTER 87,
NOT EXCEEDING 50 CC CYLINDER CAPACITY,
VALUED AT $500 PER UNIT WHOLESALE PRICE
IN THE US.\1\
8407322000.............................. Nuclear reactors, boilers, SPARK-IGNITION PISTON ENGINES EXCEEDING
machinery and mechanical 50 CC BUT NOT EXCEEDING 250 CC, TO BE
appliances; parts thereof. INSTALLED IN ROAD TRACTORS, MOTOR BUSES,
AUTOMOBILES OR TRUCKS, NEW OR USED,
VALUED AT $1,000 PER UNIT WHOLESALE
PRICE IN THE US.\1\
8407325000.............................. Nuclear reactors, boilers, SPARK-IGNITION RECIPROCATING PISTON
machinery and mechanical ENGINES EXCEEDING 50 CC BUT NOT
appliances; parts thereof. EXCEEDING 250 CC, FOR VEHICLES OF
CHAPTER 87, NESOI, VALUED AT $750 PER
UNIT WHOLESALE PRICE IN THE US.\1\
8407332000.............................. Nuclear reactors, boilers, SPARK-IGNITION PISTON ENGINES EXCEEDING
machinery and mechanical 250 CC BUT NOT EXCEEDING 1000 CC, TO BE
appliances; parts thereof. INSTALLED IN ROAD TRACTORS, MOTOR BUSES,
AUTOMOBILES OR TRUCKS, NEW/USED, VALUED
AT $1,000 PER UNIT WHOLESALE PRICE IN
THE US.\1\
8407335000.............................. Nuclear reactors, boilers, SPARK-IGNITION RECIPROCATING PISTON
machinery and mechanical ENGINES EXCEEDING 250 CC BUT NOT
appliances; parts thereof. EXCEEDING 1000 CC, NESOI, VALUED AT $500
PER UNIT WHOLESALE PRICE IN THE US.\1\
8407342030.............................. Nuclear reactors, boilers, SPARK-IGNITION PISTON ENGINES EXCEEDING
machinery and mechanical 1000CC AND NOT EXCEEDING 2000 CC TO BE
appliances; parts thereof. INSTALLED IN ROAD TRUCKS, BUSES,
AUTOMOBILES OR TRUCK TRACTORS, VALUED AT
$750 PER UNIT WHOLESALE PRICE IN THE
US.\1\
8407342090.............................. Nuclear reactors, boilers, SPARK-IGNITION PISTON ENGINES EXCEEDING
machinery and mechanical 2000 CC, TO BE INSTALLED IN ROAD
appliances; parts thereof. TRACTORS, MOTOR BUSES, AUTOMOBILES OR
TRUCK TRACTORS, VALUED AT $1,000 PER
UNIT WHOLESALE PRICE IN THE US.\1\
8407345000.............................. Nuclear reactors, boilers, SPARK-IGNITION RECIPROCATING PISTON
machinery and mechanical ENGINES EXCEEDING 1000 CC, NESOI, VALUED
appliances; parts thereof. AT $500 PER UNIT WHOLESALE PRICE IN THE
US.\1\
8407901010.............................. Nuclear reactors, boilers, SPARK-IGNITION INTERNAL COMBUSTION PISTON
machinery and mechanical ENGINES LESS THAN 4,476 W TO BE
appliances; parts thereof. INSTALLED IN AGRICULTURAL OR
HORTICULTURAL MACHINERY OR EQUIPMENT,
VALUED AT $500 PER UNIT WHOLESALE PRICE
IN THE US.\1\
8407901050.............................. Nuclear reactors, boilers, SPARK-IGNITION RECIPROCATING OR ROTARY
machinery and mechanical INTERNAL COMBUSTION PISTON ENGINES,
appliances; parts thereof. NESOI, TO BE INSTALLED IN AGRICULTURAL
OR HORTICULTURAL MACHINERY OR EQUIP,
VALUED AT $300 PER UNIT WHOLESALE PRICE
IN THE US.\1\
[[Page 12194]]
8407909010.............................. Nuclear reactors, boilers, SPARK-IGNITION INTERNAL COMBUSTION PISTON
machinery and mechanical TYPE GAS (NATURAL OR LIQUID PROPANE
appliances; parts thereof. (LP)) ENGINES, VALUED AT $300 PER UNIT
WHOLESALE PRICE IN THE US.\1\
8407909030.............................. Nuclear reactors, boilers, SPARK-IGNITION RECIPROCATING OR ROTARY
machinery and mechanical INTERNAL COMBUSTION PISTON ENGINES,
appliances; parts thereof. NESOI, LESS THAN 4476 W (6 HP), VALUED
AT $750 PER UNIT WHOLESALE PRICE IN THE
US.\1\
8407909050.............................. Nuclear reactors, boilers, SPARK-IGNITION RECIPROCATING OR ROTARY
machinery and mechanical INTERNAL COMBUSTION PISTON ENGINES,
appliances; parts thereof. NESOI, VALUED AT $500 PER UNIT WHOLESALE
PRICE IN THE US.\1\
* * * * * * *
8408100030.............................. Nuclear reactors, boilers, COMPRESSION-IGNITION INTERNAL COMBUSTION
machinery and mechanical PISTON ENGINES FOR MARINE PROPULSION,
appliances; parts thereof. EXCEEDING 223.8 KW BUT NOT EXCEEDING 373
KW, VALUED AT $750 PER UNIT WHOLESALE
PRICE IN THE US.\1\
8408100040.............................. Nuclear reactors, boilers, COMPRESSION-IGNITION INTERNAL COMBUSTION
machinery and mechanical PISTON ENGINES FOR MARINE PROPULSION,
appliances; parts thereof. EXCEEDING 373 KW BUT NOT EXCEEDING 746
KW, VALUED AT $1,000 PER UNIT WHOLESALE
PRICE IN THE US.\1\
8408100050.............................. Nuclear reactors, boilers, COMPRESSION-IGNITION INTERNAL COMBUSTION
machinery and mechanical PISTON ENGINES FOR MARINE PROPULSION,
appliances; parts thereof. EXCEEDING 746 KW, VALUED AT $5,000 PER
UNIT WHOLESALE PRICE IN THE US.\1\
8408202000.............................. Nuclear reactors, boilers, COMPRESSION-IGNITION INTERNAL COMBUSTION
machinery and mechanical PISTON ENGINES FOR PROPULSION OF
appliances; parts thereof. VEHICLES OF CHAPTER 87, TO BE INSTALLED
IN ROAD TRACTORS, BUSES, AUTOS, TRUCKS,
VALUED AT $300 PER UNIT WHOLESALE PRICE
IN THE US.\1\
8408205000.............................. Nuclear reactors, boilers, COMPRESSION-IGNITION INTERNAL COMBUSTION
machinery and mechanical PISTON ENGINES (DIESEL), FOR THE
appliances; parts thereof. PROPULSION OF VEHICLES OF CHAPTER 87,
NESOI, VALUED AT $300 PER UNIT WHOLESALE
PRICE IN THE US.\1\
8408901000.............................. Nuclear reactors, boilers, COMPRESSION-IGNITION INTERNAL COMBUSTION
machinery and mechanical PISTON ENGINES (DIESEL), TO BE INSTALLED
appliances; parts thereof. IN AGRICULTURAL OR HORTICULTURAL
MACHINERY OR EQUIPMENT, VALUED AT $500
PER UNIT WHOLESALE PRICE IN THE US.\1\
8408909010.............................. Nuclear reactors, boilers, COMPRESSION-IGNITION INTERNAL COMBUSTION
machinery and mechanical PISTON ENGINES, NESOI, NOT EXCEEDING
appliances; parts thereof. 149.2 KW, VALUED AT $300 PER UNIT
WHOLESALE PRICE IN THE US.\1\
8408909020.............................. Nuclear reactors, boilers, COMPRESSION-IGNITION INTERNAL COMBUSTION
machinery and mechanical PISTON ENGINES, NESOI, EXCEEDING 149.2
appliances; parts thereof. KW BUT NOT EXCEEDING 373 KW, VALUED AT
$500 PER UNIT WHOLESALE PRICE IN THE
US.\1\
8408909030.............................. Nuclear reactors, boilers, COMPRESSION-IGNITION INTERNAL COMBUSTION
machinery and mechanical PISTON ENGINES, NESOI, EXCEEDING 373 KW
appliances; parts thereof. NOT EXCEEDING 746 KW, VALUED AT $750 PER
UNIT WHOLESALE PRICE IN THE US.\1\
8408909040.............................. Nuclear reactors, boilers, COMPRESSION-IGNITION INTERNAL COMBUSTION
machinery and mechanical PISTON ENGINES, NESOI, EXCEEDING 746 KW
appliances; parts thereof. BUT NOT EXCEEDING 1,119 KW, VALUED AT
$1,000 PER UNIT WHOLESALE PRICE IN THE
US.\1\
8408909050.............................. Nuclear reactors, boilers, COMPRESSION-IGNITION INTERNAL COMBUSTION
machinery and mechanical PISTON ENGINES, NESOI, EXCEEDING 1,119
appliances; parts thereof. KW, VALUED AT $1,000 PER UNIT WHOLESALE
PRICE IN THE US.\1\
8409100040.............................. Nuclear reactors, boilers, PARTS FOR SPARK-IGNITION OR COMPRESSION-
machinery and mechanical IGNITION INTERNAL COMBUSTION PISTON
appliances; parts thereof. ENGINES FOR USE IN CIVIL AIRCRAFT,
VALUED AT $500 PER UNIT WHOLESALE PRICE
IN THE US.\1\
8409100080.............................. Nuclear reactors, boilers, PARTS FOR SPARK-IGNITION OR COMPRESSION-
machinery and mechanical IGNITION INTERNAL COMBUSTION PISTON
appliances; parts thereof. ENGINES FOR USE IN AIRCRAFT EXCEPT
CIVIL, VALUED AT $300 PER SET OF PARTS
WHOLESALE PRICE IN THE US.\1\
8409914000.............................. Nuclear reactors, boilers, PARTS FOR SPARK-IGNITION INTERNAL
machinery and mechanical COMBUSTION PISTON ENGINES FOR USE IN
appliances; parts thereof. ROAD TRACTORS, MOTOR BUSES, AUTOMOBILES
OR TRUCKS, VALUED AT $300 PER SET OF
PARTS WHOLESALE PRICE IN THE US.\1\
* * * * * * *
8409918000.............................. Nuclear reactors, boilers, PARTS FOR SPARK-IGNITION INTERNAL
machinery and mechanical COMBUSTION PISTON ENGINES, NESOI, VALUED
appliances; parts thereof. AT $300 PER SET OF PARTS WHOLESALE PRICE
IN THE US.\1\
8409994000.............................. Nuclear reactors, boilers, PARTS FOR COMPRESSION-IGNITION INTERNAL
machinery and mechanical COMBUSTION PISTON ENGINES (DIESEL) FOR
appliances; parts thereof. USE IN ROAD TRACTORS, MOTOR BUSES,
AUTOMOBILES OR TRUCKS, VALUED AT $300
PER SET OF PARTS WHOLESALE PRICE IN THE
US.\1\
8409996000.............................. Nuclear reactors, boilers, PARTS FOR COMPRESSION-IGNITION INTERNAL
machinery and mechanical COMBUSTION PISTON ENGINES (DIESEL) FOR
appliances; parts thereof. MARINE PROPULSION, VALUED AT $300 PER
SET OF PARTS WHOLESALE PRICE IN THE
US.\1\
8409998000.............................. Nuclear reactors, boilers, PARTS FOR COMPRESSION-IGNITION INTERNAL
machinery and mechanical COMBUSTION PISTON ENGINES (DIESEL),
appliances; parts thereof. NESOI, VALUED AT $300 PER SET OF PARTS
WHOLESALE PRICE IN THE US.\1\
8411114010.............................. Nuclear reactors, boilers, TURBOJET AIRCRAFT TURBINES (ENGINES) FOR
machinery and mechanical USE IN CIVIL AIRCRAFT, OF A THRUST NOT
appliances; parts thereof. EXCEEDING 25 KN, VALUED AT $5,000 PER
UNIT WHOLESALE PRICE IN THE US.\1\
8411114050.............................. Nuclear reactors, boilers, TURBOJET AIRCRAFT TURBINES (ENGINES)
machinery and mechanical OTHER THAN FOR CIVIL AIRCRAFT, OF A
appliances; parts thereof. THRUST NOT EXCEEDING 25 KN, VALUED AT
$750 PER UNIT WHOLESALE PRICE IN THE
US.\1\
8411118000.............................. Nuclear reactors, boilers, TURBOJET TURBINES (ENGINES), EXCEPT
machinery and mechanical AIRCRAFT, OF A THRUST NOT EXCEEDING 25
appliances; parts thereof. KN, VALUED AT $5,000 PER UNIT WHOLESALE
PRICE IN THE US.\1\
8411124010.............................. Nuclear reactors, boilers, TURBOJET AIRCRAFT TURBINES (ENGINES) FOR
machinery and mechanical USE IN CIVIL AIRCRAFT, OF A THRUST
appliances; parts thereof. EXCEEDING 25 KN, VALUED AT $1,000 PER
UNIT WHOLESALE PRICE IN THE US.\1\
8411124050.............................. Nuclear reactors, boilers, TURBOJET AIRCRAFT TURBINES (ENGINES)
machinery and mechanical OTHER THAN FOR CIVIL AIRCRAFT, OF A
appliances; parts thereof. THRUST EXCEEDING 25 KN, VALUED AT $1,000
PER UNIT WHOLESALE PRICE IN THE US.\1\
8411128000.............................. Nuclear reactors, boilers, TURBOJET TURBINES (ENGINES), EXCEPT
machinery and mechanical AIRCRAFT, OF A THRUST EXCEEDING 25 KN,
appliances; parts thereof. VALUED AT $750 PER UNIT WHOLESALE PRICE
IN THE US.\1\
8411214010.............................. Nuclear reactors, boilers, TURBOPROPELLER AIRCRAFT TURBINES
machinery and mechanical (ENGINES) FOR USE IN CIVIL AIRCRAFT, OF
appliances; parts thereof. A POWER NOT EXCEEDING 1100 KW, VALUED AT
$500 PER UNIT WHOLESALE PRICE IN THE
US.\1\
8411214050.............................. Nuclear reactors, boilers, TURBOPROPELLER AIRCRAFT TURBINES
machinery and mechanical (ENGINES) OTHER THAN FOR CIVIL AIRCRAFT,
appliances; parts thereof. OF A POWER NOT EXCEEDING 1100 KW, VALUED
AT $750 PER UNIT WHOLESALE PRICE IN THE
US.\1\
8411218000.............................. Nuclear reactors, boilers, TURBOPROPELLER TURBINES (ENGINES), EXCEPT
machinery and mechanical AIRCRAFT, OF A POWER NOT EXCEEDING 1,100
appliances; parts thereof. KW, VALUED AT $500 PER UNIT WHOLESALE
PRICE IN THE US.\1\
[[Page 12195]]
8411224010.............................. Nuclear reactors, boilers, TURBOPROPELLER AIRCRAFT TURBINES
machinery and mechanical (ENGINES) FOR USE IN CIVIL AIRCRAFT, OF
appliances; parts thereof. A POWER EXCEEDING 1100 KW, VALUED AT
$500 PER UNIT WHOLESALE PRICE IN THE
US.\1\
8411224050.............................. Nuclear reactors, boilers, TURBOPROPELLER AIRCRAFT TURBINES
machinery and mechanical (ENGINES) OTHER THAN FOR USE IN CIVIL
appliances; parts thereof. AIRCRAFT, OF A POWER EXCEEDING 1100 KW,
VALUED AT $750 PER UNIT WHOLESALE PRICE
IN THE US.\1\
8411228000.............................. Nuclear reactors, boilers, TURBOPROPELLER TURBINES (ENGINES), EXCEPT
machinery and mechanical AIRCRAFT, OF A POWER EXCEEDING 1,100 KW,
appliances; parts thereof. VALUED AT $750 PER UNIT WHOLESALE PRICE
IN THE US.\1\
8411814010.............................. Nuclear reactors, boilers, AIRCRAFT TURBINES (ENGINES) FOR USE IN
machinery and mechanical CIVIL AIRCRAFT, OF A POWER NOT EXCEEDING
appliances; parts thereof. 5000 KW, VALUED AT $5,000 PER UNIT
WHOLESALE PRICE IN THE US.\1\
8411814050.............................. Nuclear reactors, boilers, AIRCRAFT TURBINES (ENGINES), EXCEPT FOR
machinery and mechanical USE IN CIVIL AIRCRAFT, OF A POWER NOT
appliances; parts thereof. EXCEEDING 5000 KW, VALUED AT $5,000 PER
UNIT WHOLESALE PRICE IN THE US.\1\
8411818000.............................. Nuclear reactors, boilers, GAS TURBINE ENGINE, EXCEPT AIRCRAFT
machinery and mechanical NESOI, OF A POWER NOT EXCEEDING 5,000
appliances; parts thereof. KW, VALUED AT $5,000 PER UNIT WHOLESALE
PRICE IN THE US.\1\
8411824010.............................. Nuclear reactors, boilers, AIRCRAFT TURBINES (ENGINES) FOR USE IN
machinery and mechanical CIVIL AIRCRAFT, OF A POWER EXCEEDING
appliances; parts thereof. 5000 KW, VALUED AT $5,000 PER UNIT
WHOLESALE PRICE IN THE US.\1\
8411824050.............................. Nuclear reactors, boilers, AIRCRAFT TURBINES (ENGINES), EXCEPT FOR
machinery and mechanical USE IN CIVIL AIRCRAFT, OF A POWER
appliances; parts thereof. EXCEEDING 5000 KW, VALUED AT $5,000 PER
UNIT WHOLESALE PRICE IN THE US.\1\
8411828000.............................. Nuclear reactors, boilers, GAS TURBINE ENGINES, EXCEPT AIRCRAFT
machinery and mechanical NESOI, OF A POWER EXCEEDING 5,000 KW,
appliances; parts thereof. VALUED AT $750 PER UNIT WHOLESALE PRICE
IN THE US.\1\
8411914000.............................. Nuclear reactors, boilers, PARTS OF NONAIRCRAFT TURBOJETS AND
machinery and mechanical TURBOPROPELLERS, VALUED AT $750 PER SET
appliances; parts thereof. OF PARTS WHOLESALE PRICE IN THE US.\1\
8411917010.............................. Nuclear reactors, boilers, PARTS OF TURBOJETS AND TURBOPROPELLER
machinery and mechanical AIRCRAFT ENGINES FOR USE IN CIVIL
appliances; parts thereof. AIRCRAFT, VALUED AT $500 PER SET OF
PARTS WHOLESALE PRICE IN THE US.\1\
8411917050.............................. Nuclear reactors, boilers, PARTS OF TURBOJET AND TURBOPROPELLER
machinery and mechanical AIRCRAFT ENGINES, OTHER THAN FOR USE IN
appliances; parts thereof. CIVIL AIRCRAFT, VALUED AT $1,000 PER SET
OF PARTS WHOLESALE PRICE IN THE US.\1\
8411994000.............................. Nuclear reactors, boilers, PARTS OF NONAIRCRAFT GAS TURBINES, VALUED
machinery and mechanical AT $750 PER SET OF PARTS WHOLESALE PRICE
appliances; parts thereof. IN THE US.\1\
8411997010.............................. Nuclear reactors, boilers, PARTS OF GAS TURBINE AIRCRAFT ENGINES FOR
machinery and mechanical USE IN CIVIL AIRCRAFT, VALUED AT $750
appliances; parts thereof. PER SET OF PARTS WHOLESALE PRICE IN THE
US.\1\
8411997050.............................. Nuclear reactors, boilers, PARTS OF GAS TURBINE AIRCRAFT ENGINES,
machinery and mechanical OTHER THAN FOR USE IN CIVIL AIRCRAFT,
appliances; parts thereof. VALUED AT $750 PER SET OF PARTS
WHOLESALE PRICE IN THE US.\1\
8414510010.............................. Nuclear reactors, boilers, FLOOR, WALL, WINDOW, CEILING OR ROOF
machinery and mechanical FANS, WITH A SELF-CONTAINED ELECTRIC
appliances; parts thereof. MOTOR OF AN OUTPUT NOT EXCEEDING 125 W,
FOR PERMANENT INSTALLATION, VALUED AT
$300 PER UNIT WHOLESALE PRICE IN THE
US.\1\
8414510090.............................. Nuclear reactors, boilers, FANS, OTHER THAN FOR PERMANENT
machinery and mechanical INSTALLATION, WITH A SELF CONTAINED
appliances; parts thereof. ELECTRIC MOTOR OF AN OUTPUT NOT
EXCEEDING 125 W, VALUED AT $750 PER UNIT
WHOLESALE PRICE IN THE US.\1\
8414593000.............................. Nuclear reactors, boilers, TURBOCHARGERS AND SUPERCHARGERS, FAN
machinery and mechanical TYPE, VALUED AT $750 PER UNIT WHOLESALE
appliances; parts thereof. PRICE IN THE US.\1\
8414596040.............................. Nuclear reactors, boilers, FANS, NESOI, SUITABLE FOR USE WITH MOTOR
machinery and mechanical VEHICLES, VALUED AT $500 PER UNIT
appliances; parts thereof. WHOLESALE PRICE IN THE US.\1\
8414599080.............................. Nuclear reactors, boilers, FANS, NESOI, VALUED AT $300 PER UNIT
machinery and mechanical WHOLESALE PRICE IN THE US.\1\
appliances; parts thereof.
8414600000.............................. Nuclear reactors, boilers, HOODS HAVING A MAXIMUM HORIZONTAL SIDE
machinery and mechanical NOT EXCEEDING 120 CM, VALUED AT $500 PER
appliances; parts thereof. UNIT WHOLESALE PRICE IN THE US.\1\
8415103040.............................. Nuclear reactors, boilers, AIR-CONDITIONERS, WINDOW OR WALL TYPE,
machinery and mechanical SELF-CONTAINED, LESS THAN 2.93 KW PER
appliances; parts thereof. HOUR (10000 BTU/HR), VALUED AT $750 PER
UNIT WHOLESALE PRICE IN THE US.\1\
8415103060.............................. Nuclear reactors, boilers, AIR-CONDITIONERS, WINDOW OR WALL TYPE,
machinery and mechanical SELF-CONTAINED, 2.93 KW/HR OR GREATER
appliances; parts thereof. BUT LESS THAN 4.98 KW/HR (10000-16999BTU/
HR), VALUED AT $750 PER UNIT WHOLESALE
PRICE IN THE US.\1\
8415103080.............................. Nuclear reactors, boilers, AIR-CONDITIONERS, WINDOW OR WALL TYPE,
machinery and mechanical SELF-CONTAINED, 4.98 KW/HR OR GREATER
appliances; parts thereof. (17000 BTU/HR), VALUED AT $500 PER UNIT
WHOLESALE PRICE IN THE US.\1\
8415106000.............................. Nuclear reactors, boilers, AIR CONDITIONING MACHINES INCORPORATING A
machinery and mechanical REFRIGERATING UNIT, AND A VALVE FOR
appliances; parts thereof. REVERSAL OF THE COOLING/HEAT CYCLE,
WINDOW OR WALL TYPES, VALUED AT $750 PER
[…truncated; see source link]Indexed from Federal Register on February 27, 2023.
This is legal information, not legal advice. Laws vary by jurisdiction and change frequently. Always verify current law with official sources and consult a licensed attorney in your jurisdiction for advice on your specific situation.