Notice2023-03086
Tin Mill Products From the People's Republic of China: Initiation of Countervailing Duty Investigation
Primary source
Metadata and text below are from the Federal Register, a public-domain U.S. government work. Always verify the official published version before relying on it for any legal matter.
Published
February 14, 2023
Issuing agencies
Commerce DepartmentInternational Trade Administration
Full Text
<html>
<head>
<title>Federal Register, Volume 88 Issue 30 (Tuesday, February 14, 2023)</title>
</head>
<body><pre>
[Federal Register Volume 88, Number 30 (Tuesday, February 14, 2023)]
[Notices]
[Pages 9476-9481]
From the Federal Register Online via the Government Publishing Office [<a href="http://www.gpo.gov">www.gpo.gov</a>]
[FR Doc No: 2023-03086]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
International Trade Administration
[C-570-151]
Tin Mill Products From the People's Republic of China: Initiation
of Countervailing Duty Investigation
AGENCY: Enforcement and Compliance, International Trade Administration,
Department of Commerce.
DATES: Applicable February 7, 2023.
FOR FURTHER INFORMATION CONTACT: Melissa Porpotage, AD/CVD Operations,
Office II, Enforcement and Compliance, International Trade
Administration, U.S. Department of Commerce, 1401 Constitution Avenue
NW, Washington, DC 20230; telephone: (202) 482-1413.
SUPPLEMENTARY INFORMATION:
The Petition
On January 18, 2023, the U.S. Department of Commerce (Commerce)
received a countervailing duty (CVD) petition concerning imports of tin
mill products from the People's Republic of China (China) filed in
proper form on behalf of Cleveland-Cliffs Inc. and the United Steel,
Paper and Forestry, Rubber, Manufacturing, Energy, Allied Industrial
and Service Workers International Union (USW) (collectively, the
petitioners), a domestic producer of tin mill products and a certified
union, which represents the workers engaged in the production of tin
mill products in the United States.\1\ The CVD petition was accompanied
by antidumping duty (AD) petitions concerning imports of tin mill
products from Canada, China, Germany, the Netherlands, the Republic
[[Page 9477]]
of Korea, Taiwan, the Republic of Turkey and the United Kingdom.\2\
---------------------------------------------------------------------------
\1\ See Petitioners' Letter, ``Petitions for the Imposition of
Antidumping and Countervailing Duties on Imports of Tin Mill
Products from Canada, China, Germany, Netherlands, South Korea,
Taiwan, Turkey and the United Kingdom,'' dated January 18, 2023
(Petition).
\2\ Id.
---------------------------------------------------------------------------
On January 23 and 31, and February 6, 2023, Commerce requested
supplemental information pertaining to certain aspects of the
Petition.\3\ On January 27 and February 1, 2023, the petitioners filed
timely responses to these requests for additional information.\4\
---------------------------------------------------------------------------
\3\ See Commerce's Letter, ``Petitions for the Imposition of
Antidumping and Countervailing Duties on Imports of Tin Mill
Products from Canada, the People's Republic of China, Germany, the
Netherlands, the Republic of Korea, Taiwan, the Republic of Turkey,
and the United Kingdom: Supplemental Questions,'' dated January 23,
2023; see also Commerce's Letter, ``Petition for the Imposition of
Countervailing Duties on Imports of Tin Mill Products from the
People's Republic of China: Supplemental Questions,'' dated January
23, 2023 (General Issues Supplemental Questionnaire); Memorandum,
``Phone Call with Counsel to the Petitioner,'' dated January 31,
2023; and Memorandum, ``Phone Call with Counsel to the
Petitioners,'' dated February 7, 2023 (Scope Memorandum).
\4\ See Petitioners' Letters, ``Petitioners' Response to
Supplemental Volume I Questionnaire,'' dated January 27, 2023 (First
General Issues Supplement); ``Petitioners' Response to Supplemental
Volume X Questionnaire,'' dated January 27, 2023; and ``Petitioners'
Response to Second Supplemental Questionnaire,'' dated February 1,
2023 (Second General Issues Supplement).
---------------------------------------------------------------------------
In accordance with section 702(b)(1) of the Tariff Act of 1930, as
amended (the Act), the petitioners allege that the Government of China
(GOC) is providing countervailable subsidies, within the meaning of
sections 701 and 771(5) of the Act, to producers of tin mill products
in China and that such imports are materially injuring, or threatening
material injury to, the domestic industry producing in the United
States. Consistent with section 702(b)(1) of the Act and 19 CFR
351.202(b), for those alleged programs on which we are initiating a CVD
investigation, the Petition is supported by information reasonably
available to the petitioners.
Commerce finds that the petitioners filed the Petition on behalf of
the domestic industry because the petitioners are interested parties as
defined in sections 771(9)(C) and (D) of the Act. Commerce also finds
that the petitioners demonstrated sufficient industry support with
respect to the initiation of the requested CVD investigation.\5\
---------------------------------------------------------------------------
\5\ See ``Determination of Industry Support for the Petition''
section, infra.
---------------------------------------------------------------------------
Period of Investigation
Because the Petition was filed on January 18, 2023, the period of
investigation (POI) is January 1, 2022, through December 31, 2022.\6\
---------------------------------------------------------------------------
\6\ See 19 CFR 351.204(b)(2).
---------------------------------------------------------------------------
Scope of the Investigation
The merchandise covered by this investigation is tin mill products
from China. For a full description of the scope of this investigation,
see the Appendix to this notice.
Comments on the Scope of the Investigation
On January 23 and 31, and February 6, 2023, Commerce requested
information from the petitioners regarding the proposed scope to ensure
that the scope language in the Petitions is an accurate reflection of
the products for which the domestic industry is seeking relief.\7\ On
January 27, and February 1 and 6, 2023, the petitioners revised the
scope language.\8\ The description of merchandise covered by this
investigation, as described in the appendix to this notice, reflects
these clarifications.
---------------------------------------------------------------------------
\7\ See General Issues Supplemental Questionnaire at 3-4; see
also Scope Memorandum.
\8\ See First General Issues Supplement at 2-3 and Exhibit Supp
I-S3; see also Second General Issues Supplement at 2 and Exhibit I-
2S2; and Scope Memorandum.
---------------------------------------------------------------------------
As discussed in the Preamble to Commerce's regulations, we are
setting aside a period for interested parties to raise issues regarding
product coverage (i.e., scope).\9\ Commerce will consider all comments
received from interested parties and, if necessary, will consult with
interested parties prior to the issuance of the preliminary
determination. If scope comments include factual information, all such
factual information should be limited to public information.\10\ To
facilitate preparation of its questionnaires, Commerce requests that
all interested parties submit such comments by 5:00 p.m. Eastern Time
(ET) on February 27, 2023, which is 20 calendar days from the signature
date of this notice. Any rebuttal comments, which may include factual
information, must be filed by 5:00 p.m. ET on March 9, 2023, which is
ten calendar days from the initial comment deadline.
---------------------------------------------------------------------------
\9\ See Antidumping Duties; Countervailing Duties, 62 FR 27296,
27323 (May 19, 1997) (Preamble).
\10\ See 19 CFR 351.102(b)(21) (defining ``factual
information'').
---------------------------------------------------------------------------
Commerce requests that any factual information that the parties
consider relevant to the scope of the investigation be submitted during
this time period. However, if a party subsequently finds that
additional factual information pertaining to the scope of the
investigation may be relevant, the party may contact Commerce and
request permission to submit the additional information. All scope
comments must also be filed simultaneously on the record of the
concurrent AD investigations.
Filing Requirements
All submissions to Commerce must be filed electronically via
Enforcement and Compliance's Antidumping Duty and Countervailing Duty
Centralized Electronic Service System (ACCESS), unless an exception
applies.\11\ An electronically filed document must be received
successfully in its entirety by the time and date it is due.
---------------------------------------------------------------------------
\11\ See Antidumping and Countervailing Duty Proceedings:
Electronic Filing Procedures; Administrative Protective Order
Procedures, 76 FR 39263 (July 6, 2011); see also Enforcement and
Compliance; Change of Electronic Filing System Name, 79 FR 69046
(November 20, 2014), for details of Commerce's electronic filing
requirements, effective August 5, 2011. Information on using ACCESS
can be found at <a href="https://access.trade.gov/help.aspx">https://access.trade.gov/help.aspx</a> and a handbook
can be found at <a href="https://access.trade.gov/help/Handbook_on_Electronic_Filing_Procedures.pdf">https://access.trade.gov/help/Handbook_on_Electronic_Filing_Procedures.pdf</a>.
---------------------------------------------------------------------------
Consultations
Pursuant to sections 702(b)(4)(A)(i) and (ii) of the Act, Commerce
notified the GOC of the receipt of the Petition and provided it an
opportunity for consultations with respect to the Petition.\12\
However, the GOC did not request consultations.
---------------------------------------------------------------------------
\12\ See Commerce's Letter, ``Countervailing Duty Petition on
Tin Mill Products from the People's Republic of China,'' dated
January 19, 2023.
---------------------------------------------------------------------------
Determination of Industry Support for the Petition
Section 702(b)(1) of the Act requires that a petition be filed on
behalf of the domestic industry. Section 702(c)(4)(A) of the Act
provides that a petition meets this requirement if the domestic
producers or workers who support the petition account for: (i) at least
25 percent of the total production of the domestic like product; and
(ii) more than 50 percent of the production of the domestic like
product produced by that portion of the industry expressing support
for, or opposition to, the petition. Moreover, section 702(c)(4)(D) of
the Act provides that, if the petition does not establish support of
domestic producers or workers accounting for more than 50 percent of
the total production of the domestic like product, Commerce shall: (i)
poll the industry or rely on other information in order to determine if
there is support for the petition, as required by subparagraph (A); or
(ii) determine industry support using a statistically valid sampling
method to poll the ``industry.''
Section 771(4)(A) of the Act defines the ``industry'' as the
producers as a whole of a domestic like product. Thus, to determine
whether a petition has the requisite industry support, the statute
[[Page 9478]]
directs Commerce to look to producers and workers who produce the
domestic like product. The U.S. International Trade Commission (ITC),
which is responsible for determining whether ``the domestic industry''
has been injured, must also determine what constitutes a domestic like
product in order to define the industry. While both Commerce and the
ITC must apply the same statutory definition regarding the domestic
like product,\13\ they do so for different purposes and pursuant to a
separate and distinct authority. In addition, Commerce's determination
is subject to limitations of time and information. Although this may
result in different definitions of the like product, such differences
do not render the decision of either agency contrary to law.\14\
---------------------------------------------------------------------------
\13\ See section 771(10) of the Act.
\14\ See USEC, Inc. v. United States, 132 F. Supp. 2d 1, 8 (CIT
2001) (citing Algoma Steel Corp., Ltd. v. United States, 688 F.
Supp. 639, 644 (CIT 1988), aff'd 865 F.2d 240 (Fed. Cir. 1989)).
---------------------------------------------------------------------------
Section 771(10) of the Act defines the domestic like product as ``a
product which is like, or in the absence of like, most similar in
characteristics and uses with, the article subject to an investigation
under this title.'' Thus, the reference point from which the domestic
like product analysis begins is ``the article subject to an
investigation'' (i.e., the class or kind of merchandise to be
investigated, which normally will be the scope as defined in the
petition).
With regard to the domestic like product, the petitioners do not
offer a definition of the domestic like product distinct from the scope
of the investigation.\15\ Based on our analysis of the information
submitted on the record, we have determined that tin mill products, as
defined in the scope, constitute a single domestic like product, and we
have analyzed industry support in terms of that domestic like
product.\16\
---------------------------------------------------------------------------
\15\ See Petition at Volume I (pages 20 and 22-25); see also
First General Issues Supplement at 1 and Exhibit I-S1 (containing
Tin- and Chromium-Coated Steel Sheet from Japan, Inv. Nos. 731-TA-
860 (Preliminary), USITC Pub. 3264 (December 1999), at 5; and Tin-
and Chromium-Coated Steel Sheet from Japan, Inv. No. 731-TA-860
(Third Review), USITC Pub. 4795 (June 2018) (Tin Mill Products Third
Review), at 6); and Second General Issues Supplement at 1 and
Exhibit I-S1 (containing Tin- and Chromium-Coated Steel Sheet from
Japan, Inv. No. 731-TA-860 (Final), USITC Pub. 3337 (August 2000),
at 5).
\16\ For a discussion of the domestic like product analysis as
applied to this case and information regarding industry support, see
CVD Investigation Initiation Checklist, ``Tin Mill Products from the
People's Republic of China,'' dated concurrently with this notice
(China CVD Initiation Checklist), at Attachment II (Analysis of
Industry Support for the Antidumping and Countervailing Duty
Petitions Covering Tin Mill Products from Canada, the People's
Republic of China, Germany, the Netherlands, the Republic of Korea,
Taiwan, the Republic of Turkey and the United Kingdom).
---------------------------------------------------------------------------
In determining whether the petitioners have standing under section
702(c)(4)(A) of the Act, we considered the industry support data
contained in the Petition with reference to the domestic like product
as defined in the ``Scope of the Investigation,'' in the appendix to
this notice. To establish industry support, the petitioners provided
Cleveland-Cliffs' production of tin mill products in 2022 and estimated
the 2022 production of the remaining U.S. producers of tin mill
products.\17\ The petitioners stated that the USW represents workers
accounting for all domestic production of tin mill products, and as
such, the supporters of the Petition account for all U.S. production of
tin mill products.\18\ We relied on data provided by the petitioners
for purposes of measuring industry support.\19\
---------------------------------------------------------------------------
\17\ See Petition at Volume I (pages 5-6 and Exhibit I-5); see
also First General Issues Supplement at 3-5 and Exhibit I-S4; Second
General Issues Supplement at 2 and Exhibit I-2S3; and Petitioners'
Letter, ``Tin Mill products from Canada, China, Germany,
Netherlands, South Korea, Taiwan, Turkey, and the United Kingdom,''
dated February 1, 2023 (Petitioners Letter).
\18\ See Petition at Volume I (pages 2-6 and Exhibits I-5 and I-
10 through I-12); see also First General Issues Supplement at 4-5.
\19\ See Petition at Volume I (pages 2-6 and Exhibits I-5 and I-
10 through I-12); see also First General Issues Supplement at 1, 3-5
and Exhibits I-S1 (containing Tin Mill Products Third Review) and I-
S4; Second General Issues Supplement at 2 and Exhibit I-2S3; and
Petitioners Letter. For further discussion, see Attachment II of
China CVD Initiation Checklist.
---------------------------------------------------------------------------
On January 31, 2023, we received comments on industry support from
United States Steel Corporation (U.S. Steel), a U.S. producer of tin
mill products.\20\ On February 2, 2023, the petitioners responded to
the comments from U.S. Steel.\21\
---------------------------------------------------------------------------
\20\ See U.S. Steel's Letter, ``Tin Mill Products from Canada,
the People's Republic of China, Germany, the Netherlands, the
Republic of Korea, Taiwan, the Republic of Turkey, and the United
Kingdom: Comments on Industry Support,'' dated January 31, 2023
(U.S. Steel Letter).
\21\ See Petitioners Letter.
---------------------------------------------------------------------------
Our review of the data provided in the Petition, the First General
Issues Supplement, the Second General Issues Supplement, the
Petitioners Letter, and other information readily available to Commerce
indicates that the petitioners have established industry support for
the Petition.\22\ First, the Petition established support from domestic
producers (or workers) accounting for more than 50 percent of the total
production of the domestic like product and, as such, Commerce is not
required to take further action in order to evaluate industry support
(e.g., polling).\23\ Second, the domestic producers (or workers) have
met the statutory criteria for industry support under section
702(c)(4)(A)(i) of the Act because the domestic producers (or workers)
who support the Petition account for at least 25 percent of the total
production of the domestic like product.\24\ Finally, the domestic
producers (or workers) have met the statutory criteria for industry
support under section 702(c)(4)(A)(ii) of the Act because the domestic
producers (or workers) who support the Petition account for more than
50 percent of the production of the domestic like product produced by
that portion of the industry expressing support for, or opposition to,
the Petition.\25\ Accordingly, Commerce determines that the Petition
was filed on behalf of the domestic industry within the meaning of
section 702(b)(1) of the Act.\26\
---------------------------------------------------------------------------
\22\ See Petition at Volume I (pages 4-6 and Exhibits I-5 and I-
10 through I-12); see also First General Issues Supplement at 3-5
and Exhibits I-S1 (containing Tin Mill Products Third Review) and I-
S4; Second General Issues Supplement at 2 and Exhibit I-2S3; U.S.
Steel Letter; and Petitioners Letter. For further discussion, see
Attachment II of the China CVD Initiation Checklist.
\23\ See Attachment II of China CVD Initiation Checklist; see
also section 702(c)(4)(D) of the Act.
\24\ See Attachment II of the China CVD Initiation Checklist.
\25\ Id.
\26\ Id.
---------------------------------------------------------------------------
Injury Test
Because China is a ``Subsidies Agreement Country'' within the
meaning of section 701(b) of the Act, section 701(a)(2) of the Act
applies to this investigation. Accordingly, the ITC must determine
whether imports of the subject merchandise from China materially
injure, or threaten material injury to, a U.S. industry.
Allegations and Evidence of Material Injury and Causation
The petitioners allege that imports of the subject merchandise are
benefitting from countervailable subsidies and that such imports are
causing, or threaten to cause, material injury to the U.S. industry
producing the domestic like product. In addition, the petitioners
allege that subject imports exceed the negligibility threshold provided
for under section 771(24)(A) of the Act.\27\
---------------------------------------------------------------------------
\27\ See Petition at Volume I (pages 28-29 and Exhibit I-26).
---------------------------------------------------------------------------
The petitioners contend that the industry's injured condition is
illustrated by the significant volume of subject imports; declining
market share; underselling and price depression and/or suppression;
lost sales and revenues; and adverse impact on the domestic industry's
employment variables and
[[Page 9479]]
profitability.\28\ We assessed the allegations and supporting evidence
regarding material injury, threat of material injury, causation, as
well as negligibility, and we have determined that these allegations
are properly supported by adequate evidence and meet the statutory
requirements for initiation.\29\
---------------------------------------------------------------------------
\28\ See Petition at Volume I (pages 25-48 and Exhibits I-3, I-
5, I-9, I-19, and I-25 through I-28); see also First General Issues
Supplement at 1, 7-9, and Exhibits I-S1 (containing Tin Mill
Products Third Review), I-S5, and I-S8.
\29\ See China CVD Initiation Checklist at Attachment III
(Analysis of Allegations and Evidence of Material Injury and
Causation for the Antidumping and Countervailing Duty Petitions
Covering Tin Mill Products from Canada, the People's Republic of
China, Germany, the Netherlands, the Republic of Korea, Taiwan, the
Republic of Turkey, and United Kingdom).
---------------------------------------------------------------------------
Initiation of CVD Investigation
Based upon the examination of the Petition and supplemental
responses, we find that they meet the requirements of section 702 of
the Act. Therefore, we are initiating a CVD investigation to determine
whether imports of tin mill products from China benefit from
countervailable subsidies conferred by the GOC. Based on our review of
the Petition, we find that there is sufficient information to initiate
a CVD investigation on all of the 20 alleged programs; however, we
recommend only initiating on Valued Added-Tax (VAT) Rebates on
Domestically Produced Equipment and Import Tariff and VAT Exemptions on
Imported Equipment in Encouraged Industries with respect to the pre-
2009 period. For a full discussion of the basis for our decision to
initiate on each program, see the China CVD Initiation Checklist. A
public version of the initiation checklist for this investigation is
available on ACCESS. In accordance with section 703(b)(1) of the Act
and 19 CFR 351.205(b)(1), unless postponed, we will make our
preliminary determination no later than 65 days after the date of this
initiation.
Respondent Selection
The petitioners named 19 companies in China as producers and/or
exporters of tin mill products.\30\ Commerce intends to follow its
standard practice in CVD investigations and calculate company-specific
subsidy rates in this investigation. In the event that Commerce
determines that the number of companies is large and it cannot
individually examine each company based upon Commerce's resources,
where appropriate, Commerce intends to select mandatory respondents
based on U.S. Customs and Border Protection (CBP) data for U.S. imports
of tin mill products from China during the POI under the appropriate
Harmonized Tariff Schedule of the United States subheadings listed in
the ``Scope of the Investigation'' in the Appendix.
---------------------------------------------------------------------------
\30\ See Petition at Volume I (Exhibit I-21).
---------------------------------------------------------------------------
Distribution of Copies of the Petition
In accordance with section 702(b)(4)(A) of the Act and 19 CFR
351.202(f), a copy of the public version of the Petition has been
provided to the GOC via ACCESS. To the extent practicable, we will
attempt to provide a copy of the public version of the CVD Petition to
each exporter named in the CVD Petition, as provided under 19 CFR
351.203(c)(2).
ITC Notification
Commerce will notify the ITC of its initiation, as required by
section 702(d) of the Act.
Preliminary Determination by the ITC
The ITC will preliminarily determine, within 45 days after the date
on which the Petition was filed, whether there is a reasonable
indication that imports of tin mill products from China are materially
injuring, or threatening material injury to, a U.S. industry.\31\ A
negative ITC determination will result in the investigation being
terminated.\32\ Otherwise, this CVD investigation will proceed
according to statutory and regulatory time limits.
---------------------------------------------------------------------------
\31\ See section 703(a)(1) of the Act.
\32\ Id.
---------------------------------------------------------------------------
Submission of Factual Information
Factual information is defined in 19 CFR 351.102(b)(21) as: (i)
evidence submitted in response to questionnaires; (ii) evidence
submitted in support of allegations; (iii) publicly available
information to value factors under 19 CFR 351.408(c) or to measure the
adequacy of remuneration under 19 CFR 351.511(a)(2); (iv) evidence
placed on the record by Commerce; and (v) evidence other than factual
information described in (i)-(iv). Section 351.301(b) of Commerce's
regulations requires any party, when submitting factual information, to
specify under which subsection of 19 CFR 351.102(b)(21) the information
is being submitted \33\ and, if the information is submitted to rebut,
clarify, or correct factual information already on the record, to
provide an explanation identifying the information already on the
record that the factual information seeks to rebut, clarify, or
correct.\34\ Time limits for the submission of factual information are
addressed in 19 CFR 351.301, which provides specific time limits based
on the type of factual information being submitted. Interested parties
should review the regulations prior to submitting factual information
in this investigation.
---------------------------------------------------------------------------
\33\ See 19 CFR 351.301(b).
\34\ See 19 CFR 351.301(b)(2).
---------------------------------------------------------------------------
Extensions of Time Limits
Parties may request an extension of time limits before the
expiration of a time limit established under 19 CFR 351.301, or as
otherwise specified by Commerce. In general, an extension request will
be considered untimely if it is filed after the expiration of the time
limit established under 19 CFR 351.301, or as otherwise specified by
Commerce.\35\ For submissions that are due from multiple parties
simultaneously, an extension request will be considered untimely if it
is filed after 10:00 a.m. ET on the due date. Under certain
circumstances, we may elect to specify a different time limit by which
extension requests will be considered untimely for submissions which
are due from multiple parties simultaneously. In such a case, Commerce
will inform parties in a letter or memorandum of the deadline
(including a specified time) by which extension requests must be filed
to be considered timely. An extension request must be made in a
separate, standalone submission; under limited circumstances we will
grant untimely filed requests for the extension of time limits. Parties
should review Commerce's regulations concerning the extension of time
limits and the Time Limits Final Rule prior to submitting factual
information in this investigation.\36\
---------------------------------------------------------------------------
\35\ See 19 CFR 351.302.
\36\ See 19 CFR 351.301; see also Extension of Time Limits;
Final Rule, 78 FR 57790 (September 20, 2013) (Time Limits Final
Rule), available at <a href="https://www.gpo.gov/fdsys/pkg/FR-2013-09-20/html/2013-22853.htm">https://www.gpo.gov/fdsys/pkg/FR-2013-09-20/html/2013-22853.htm</a>.
---------------------------------------------------------------------------
Certification Requirements
Any party submitting factual information in an AD or CVD proceeding
must certify to the accuracy and completeness of that information.\37\
Parties must use the certification formats provided in 19 CFR
351.303(g).\38\ Commerce intends to reject factual submissions if the
submitting party does not comply with
[[Page 9480]]
the applicable certification requirements.
---------------------------------------------------------------------------
\37\ See section 782(b) of the Act.
\38\ See Certification of Factual Information to Import
Administration During Antidumping and Countervailing Duty
Proceedings, 78 FR 42678 (July 17, 2013) (Final Rule); see also
frequently asked questions regarding the Final Rule, available at
<a href="https://enforcement.trade.gov/tlei/notices/factual_info_final_rule_FAQ_07172013.pdf">https://enforcement.trade.gov/tlei/notices/factual_info_final_rule_FAQ_07172013.pdf</a>.
---------------------------------------------------------------------------
Notification to Interested Parties
Interested parties must submit applications for disclosure under
administrative protective order in accordance with 19 CFR 351.305.
Parties wishing to participate in this investigation should ensure that
they meet the requirements of 19 CFR 351.103(d) (e.g., by filing the
required letters of appearance). Note that Commerce has temporarily
modified certain of its requirements for serving documents containing
business proprietary information, until further notice.\39\
---------------------------------------------------------------------------
\39\ See Temporary Rule Modifying AD/CVD Service Requirements
Due to COVID-19; Extension of Effective Period, 85 FR 41363 (July
10, 2020).
---------------------------------------------------------------------------
This notice is issued and published pursuant to sections 702 and
777(i) of the Act, and 19 CFR 351.203(c).
Dated: February 7, 2023.
Lisa W. Wang,
Assistant Secretary for Enforcement and Compliance.
Appendix
Scope of the Investigation
The products within the scope of this investigation are tin mill
flat-rolled products that are coated or plated with tin, chromium,
or chromium oxides. Flat-rolled steel products coated with tin are
known as tinplate. Flat-rolled steel products coated with chromium
or chromium oxides are known as tin-free steel or electrolytic
chromium-coated steel. The scope includes all the noted tin mill
products regardless of thickness, width, form (in coils or cut
sheets), coating type (electrolytic or otherwise), edge (trimmed,
untrimmed or further processed, such as scroll cut), coating
thickness, surface finish, temper, coating metal (tin, chromium,
chromium oxide), reduction (single- or double-reduced), and whether
or not coated with a plastic material.
All products that meet the written physical description are
within the scope of this investigation unless specifically excluded.
The following products are outside and/or specifically excluded from
the scope of this investigation:
<bullet> Single reduced electrolytically chromium coated steel
with a thickness 0.238 mm (85 pound base box) (<plus-minus>10%) or
0.251 mm (90 pound base box) (<plus-minus>10%) or 0.255 mm (<plus-
minus>10%) with 770 mm (minimum width) (<plus-minus>1.588 mm) by 900
mm (maximum length if sheared) sheet size or 30.6875 inches (minimum
width) (<plus-minus>\1/16\ inch) and 35.4 inches (maximum length if
sheared) sheet size; with type MR or higher (per ASTM) A623 steel
chemistry; batch annealed at T2 \1/2\ anneal temper, with a yield
strength of 31 to 42 kpsi (214 to 290 Mpa); with a tensile strength
of 43 to 58 kpsi (296 to 400 Mpa); with a chrome coating restricted
to 32 to 150 mg/m\2\; with a chrome oxide coating restricted to 6 to
25 mg/m\2\ with a modified 7B ground roll finish or blasted roll
finish; with roughness average (Ra) 0.10 to 0.35 micrometers,
measured with a stylus instrument with a stylus radius of 2 to 5
microns, a trace length of 5.6 mm, and a cut-off of 0.8 mm, and the
measurement traces shall be made perpendicular to the rolling
direction; with an oil level of 0.17 to 0.37 grams/base box as type
BSO, or 2.5 to 5.5 mg/m\2\ as type DOS, or 3.5 to 6.5 mg/m\2\ as
type ATBC; with electrical conductivity of static probe voltage drop
of 0.46 volts drop maximum, and with electrical conductivity
degradation to 0.70 volts drop maximum after stoving (heating to 400
degrees F for 100 minutes followed by a cool to room temperature).
<bullet> Single reduced electrolytically chromium- or tin-coated
steel in the gauges of 0.0040 inch nominal, 0.0045 inch nominal,
0.0050 inch nominal, 0.0061 inch nominal (55 pound base box weight),
0.0066 inch nominal (60 pound base box weight), and 0.0072 inch
nominal (65 pound base box weight), regardless of width, temper,
finish, coating or other properties.
<bullet> Single reduced electrolytically chromium coated steel
in the gauge of 0.024 inch, with widths of 27.0 inches or 31.5
inches, and with T-1 temper properties.
<bullet> Single reduced electrolytically chromium coated steel,
with a chemical composition of 0.005% max carbon, 0.030% max
silicon, 0.25% max manganese, 0.025% max phosphorous, 0.025% max
sulfur 0.070% max aluminum, and the balance iron, with a metallic
chromium layer of 70-130 mg/m\2\, with a chromium oxide layer of 5-
30 mg/m\2\, with a tensile strength of 260-440 N/mm\2\, with an
elongation of 28-48%, with a hardness (HR-30T) of 40-58, with a
surface roughness of 0.5-1.5 microns Ra, with magnetic properties of
Bm (kg) 10.0 minimum, Br (kg) 8.0 minimum, Hc (Oe) 2.5-3.8, and MU
1400 minimum, as measured with a Riken Denshi DC magnetic
characteristic measuring machine, Model BHU-60.
<bullet> Bright finish tin-coated sheet with a thickness equal
to or exceeding 0.0299 inch, coated to thickness of \3/4\ pound
(0.000045 inch) and 1 pound (0.00006 inch).
<bullet> Electrolytically chromium coated steel having ultra
flat shape defined as oil can maximum depth of \5/64\ inch (2.0 mm)
and edge wave maximum of \5/64\ inch (2.0 mm) and no wave to
penetrate more than 2.0 inches (51.0 mm) from the strip edge and
coilset or curling requirements of average maximum of \5/64\ inch
(2.0 mm) (based on six readings, three across each cut edge of a 24
inches (61 cm) long sample with no single reading exceeding \4/32\
inch (3.2 mm) and no more than two readings at \4/32\ inch (3.2 mm))
and (for 85 pound base box item only: crossbuckle maximums of 0.001
inch (0.0025 mm) average having no reading above 0.005 inch (0.127
mm)), with a camber maximum of \1/4\ inch (6.3 mm) per 20 feet (6.1
meters), capable of being bent 120 degrees on a 0.002 inch radius
without cracking, with a chromium coating weight of metallic
chromium at 100 mg/m\2\ and chromium oxide of 10 mg/m\2\, with a
chemistry of 0.13% maximum carbon, 0.60% maximum manganese, 0.15%
maximum silicon, 0.20% maximum copper, 0.04% maximum phosphorous,
0.05% maximum sulfur, and 0.20% maximum aluminum, with a surface
finish of Stone Finish 7C, with a DOS-A oil at an aim level of 2 mg/
square meter, with not more than 15 inclusions/foreign matter in 15
feet (4.6 meters) (with inclusions not to exceed 1/32 inch (0.8 mm)
in width and \3/64\ inch (1.2 mm) in length), with thickness/temper
combinations of either 60 pound base box (0.0066 inch) double
reduced CADR8 temper in widths of 25.00 inches, 27.00 inches, 27.50
inches, 28.00 inches, 28.25 inches, 28.50 inches, 29.50 inches,
29.75 inches, 30.25 inches, 31.00 inches, 32.75 inches, 33.75
inches, 35.75 inches, 36.25 inches, 39.00 inches, or 43.00 inches,
or 85 pound base box (0.0094 inch) single reduced CAT4 temper in
widths of 25.00 inches, 27.00 inches, 28.00 inches, 30.00 inches,
33.00 inches, 33.75 inches, 35.75 inches, 36.25 inches, or 43.00
inches, with width tolerance of \1/8\ inch, with a thickness
tolerance of 0.0005 inch, with a maximum coil weight of 20,000
pounds (9071.0 kg), with a minimum coil weight of 18,000 pounds
(8164.8 kg), with a coil inside diameter of 16 inches (40.64 cm)
with a steel core, with a coil maximum outside diameter of 59.5
inches (151.13 cm), with a maximum of one weld (identified with a
paper flag) per coil, with a surface free of scratches, holes, and
rust.
<bullet> Electrolytically tin coated steel having differential
coating with 1.00 pound/base box equivalent on the heavy side, with
varied coating equivalents in the lighter side (detailed below),
with a continuous cast steel chemistry of type MR, with a surface
finish of type 7B or 7C, with a surface passivation of 0.7 mg/square
foot of chromium applied as a cathodic dichromate treatment, with
coil form having restricted oil film weights of 0.3-0.4 grams/base
box of type DOS-A oil, coil inside diameter ranging from 15.5 to 17
inches, coil outside diameter of a maximum 64 inches, with a maximum
coil weight of 25,000 pounds, and with temper/coating/dimension
combinations of: (1) CAT4 temper, 1.00/.050 pound/base box coating,
70 pound/base box (0.0077 inch) thickness, and 33.1875 inch ordered
width; or (2) CAT5 temper, 1.00/0.50 pound/base box coating, 75
pound/base box (0.0082 inch) thickness, and 34.9375 inch or 34.1875
inch ordered width; or (3) CAT5 temper, 1.00/0.50 pound/base box
coating, 107 pound/base box (0.0118 inch) thickness, and 30.5625
inch or 35.5625 inch ordered width; or (4) CADR8 temper, 1.00/0.50
pound/base box coating, 85 pound/base box (0.0093 inch) thickness,
and 35.5625 inch ordered width; or (5) CADR8 temper, 1.00/0.25
pound/base box coating, 60 pound/base box (0.0066 inch) thickness,
and 35.9375 inch ordered width; or (6) CADR8 temper, 1.00/0.25
pound/base box coating, 70 pound/base box (0.0077 inch) thickness,
and 32.9375 inch, 33.125 inch, or 35.1875 inch ordered width.
<bullet> Electrolytically tin coated steel having differential
coating with 1.00 pound/base box equivalent on the heavy side, with
varied coating equivalents on the lighter side (detailed below),
with a continuous cast steel chemistry of type MR, with a surface
finish of type 7B or 7C, with a surface passivation of 0.5 mg/square
foot of chromium applied as
[[Page 9481]]
a cathodic dichromate treatment, with ultra flat scroll cut sheet
form, with CAT5 temper with 1.00/0.10 pound/base box coating, with a
lithograph logo printed in a uniform pattern on the 0.10 pound
coating side with a clear protective coat, with both sides waxed to
a level of 15-20 mg/216 sq. in., with ordered dimension combinations
of (1) 75 pound/base box (0.0082 inch) thickness and 34.9375 inch x
31.748 inch scroll cut dimensions; or (2) 75 pound/base box (0.0082
inch) thickness and 34.1875 inch x 29.076 inch scroll cut
dimensions; or (3) 107 pound/base box (0.0118 inch) thickness and
30.5625 inch x 34.125 inch scroll cut dimension.
<bullet> Tin-free steel coated with a metallic chromium layer
between 100-200 mg/m\2\ and a chromium oxide layer between 5-30 mg/
m\2\; chemical composition of 0.05% maximum carbon, 0.03% maximum
silicon, 0.60% maximum manganese, 0.02% maximum phosphorous, and
0.02% maximum sulfur; magnetic flux density (Br) of 10 kg minimum
and a coercive force (Hc) of 3.8 Oe minimum.
<bullet> Tin-free steel laminated on one or both sides of the
surface with a polyester film, consisting of two layers (an
amorphous layer and an outer crystal layer), that contains no more
than the indicated amounts of the following environmental hormones:
1 mg/kg BADGE (BisPhenol--A Di-glycidyl Ether), 1 mg/kg BFDGE
(BisPhenol--F Di-glycidyl Ether), and 3 mg/kg BPA (BisPhenol--A).
The merchandise subject to this investigation is currently
classified in the Harmonized Tariff Schedule of the United States
(HTSUS), under HTSUS subheadings 7210.11.0000, 7210.12.0000,
7210.50.0020, 7210.50.0090, 7212.10.0000, and 7212.50.0000 if of
non-alloy steel and under HTSUS subheadings 7225.99.0090, and
7226.99.0180 if of alloy steel. Although the subheadings are
provided for convenience and customs purposes, the written
description of the scope of the investigation is dispositive.
[FR Doc. 2023-03086 Filed 2-13-23; 8:45 am]
BILLING CODE 3510-DS-P
</pre></body>
</html>Indexed from Federal Register on February 14, 2023.
This is legal information, not legal advice. Laws vary by jurisdiction and change frequently. Always verify current law with official sources and consult a licensed attorney in your jurisdiction for advice on your specific situation.