Notice2022-28623
Petition for Modification of Application of Existing Mandatory Safety Standards
Primary source
Metadata and text below are from the Federal Register, a public-domain U.S. government work. Always verify the official published version before relying on it for any legal matter.
Published
January 5, 2023
Issuing agencies
Labor DepartmentMine Safety and Health Administration
Abstract
This notice is a summary of a petition for modification submitted to the Mine Safety and Health Administration (MSHA) by the party listed below.
Full Text
<html>
<head>
<title>Federal Register, Volume 88 Issue 3 (Thursday, January 5, 2023)</title>
</head>
<body><pre>
[Federal Register Volume 88, Number 3 (Thursday, January 5, 2023)]
[Notices]
[Pages 886-887]
From the Federal Register Online via the Government Publishing Office [<a href="http://www.gpo.gov">www.gpo.gov</a>]
[FR Doc No: 2022-28623]
-----------------------------------------------------------------------
DEPARTMENT OF LABOR
Mine Safety and Health Administration
Petition for Modification of Application of Existing Mandatory
Safety Standards
AGENCY: Mine Safety and Health Administration, Labor.
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: This notice is a summary of a petition for modification
submitted to the Mine Safety and Health Administration (MSHA) by the
party listed below.
DATES: All comments on the petition must be received by MSHA's Office
of Standards, Regulations, and Variances on or before February 6, 2023.
ADDRESSES: You may submit comments identified by Docket No. MSHA-2022-
0069 by any of the following methods:
1. Federal eRulemaking Portal: <a href="https://www.regulations.gov">https://www.regulations.gov</a>. Follow
the instructions for submitting comments for MSHA-2022-0069.
2. Fax: 202-693-9441.
3. Email: <a href="/cdn-cgi/l/email-protection#572732233e233e383934383a3a323923241733383b79303821"><span class="__cf_email__" data-cfemail="fa8a9f8e938e939594999597979f948e89ba9e9596d49d958c">[email protected]</span></a>.
4. Regular Mail or Hand Delivery: MSHA, Office of Standards,
Regulations, and Variances, 201 12th Street South, Suite 4E401,
Arlington, Virginia 22202-5452.
Attention: S. Aromie Noe, Director, Office of Standards,
Regulations, and Variances. Persons delivering documents are required
to check in at the receptionist's desk in Suite 4E401. Individuals may
inspect copies of the petition and comments during normal business
hours at the address listed above. Before visiting MSHA in person, call
202-693-9455 to make an appointment, in keeping with the Department of
Labor's COVID-19 policy. Special health precautions may be required.
FOR FURTHER INFORMATION CONTACT: S. Aromie Noe, Office of Standards,
Regulations, and Variances at 202-693-9440 (voice),
<a href="/cdn-cgi/l/email-protection#afffcadbc6dbc6c0c1dcc9c0ddc2c0cbc6c9c6cccedbc6c0c1efcbc0c381c8c0d9"><span class="__cf_email__" data-cfemail="8bdbeeffe2ffe2e4e5f8ede4f9e6e4efe2ede2e8eaffe2e4e5cbefe4e7a5ece4fd">[email protected]</span></a> (email), or 202-693-9441 (fax). [These
are not toll-free numbers.]
SUPPLEMENTARY INFORMATION: Section 101(c) of the Federal Mine Safety
and Health Act of 1977 and title 30 of the Code of Federal Regulations
(CFR) part 44 govern the application, processing, and disposition of
petitions for modification.
I. Background
Section 101(c) of the Federal Mine Safety and Health Act of 1977
(Mine Act) allows the mine operator or representative of miners to file
a petition to modify the application of any mandatory safety standard
to a coal or other mine if the Secretary of Labor determines that:
1. An alternative method of achieving the result of such standard
exists which will at all times guarantee no less than the same measure
of protection afforded the miners of such mine by such standard; or
2. The application of such standard to such mine will result in a
diminution of safety to the miners in such mine.
In addition, sections 44.10 and 44.11 of 30 CFR establish the
requirements for filing petitions for modification.
II. Petition for Modification
Docket Number: M-2022-033-C.
Petitioner: Century Mining, LLC, 7004 Buckhannon Road, Volga, West
Virginia 26238.
Mine: Longview Mine, MSHA ID No. 46-09447, located in Barbour
County, West Virginia.
Regulation Affected: 30 CFR 75.507-1(a), Electric equipment other
than power-connection points; outby the last open crosscut; return air;
permissibility requirements.
Modification Request: The petitioner requests a modification of 30
CFR 75.507-1(a) to permit the use of the CleanSpace EX Powered
Respirator, a battery powered respirable protection unit, in return
airways as an alternative method of respirable dust protection.
The petitioner states that:
(a) They are seeking an alternative to the 3M Airstream helmet to
provide miners with respirable protection against coal mine dust, a
protection that can provide long-term health benefits.
(b) The 3M Airstream helmet has been used in mines for over 40
years. 3M faced component disruptions for the Airstream product,
causing 3M to discontinue, globally, the Airstream on June 1, 2020. The
ability to order an Airstream system and components ended in February
2020, with components available through June 2020. Currently, there are
no replacement powered air purifying respirators (PAPRs) that meet the
MSHA standard for permissibility. PAPRs provide a constant flow of
filtered air and offer respiratory protection and comfort in hot
working environments.
(c) The CleanSpace EX Powered Respirator (CleanSpace EX) is UL
certified to the ANSI/UL 60079-11 standard and can be used in hazardous
locations because it meets the intrinsic safety protection level. It is
acceptable in other jurisdictions for use in mines with the potential
for methane accumulation. The product is not MSHA approved, and the
manufacturer is not pursuing approval. The standards for the approval
of these respirators are an accepted alternative to MSHA's standards
and provide the same level of protection.
(d) The CleanSpace EX uses a lithium-ion polymer battery that is
neither accessible nor removable. The lithium-ion polymer battery and
motor/blower assembly are both contained within the sealed power pack
assembly. It charges as a complete unit.
(e) The CleanSpace EX can be easily disassembled and cleaned.
(f) The CleanSpace EX is designed to utilize either a half or full
facemask and NIOSH-approved particulate filters. It does not impair
vision nor communication. The CleanSpace EX provides more comfort, as
it allows the miner to simultaneously wear the issued hardhat with a
headlamp. The PAPR's
[[Page 887]]
filter housing and fan assembly are above the shoulders, reducing
ergonomic restrictions, freeing the miner from wearing the fan and
filter unit around the waist, and eliminating hose attachments to the
unit, which could create added hazards.
The petitioner proposes the following alternative method:
(a) Affected mine employees shall be trained in the proper use and
maintenance of the CleanSpace EX in accordance with the established
manufacturer guidelines. Mine employees shall also be trained to
inspect the unit before each use to determine if there is any damage or
defects to the unit that would negatively impact intrinsic safety. This
inspection shall include all associated wiring and connections and
shall take place prior to the equipment being taken underground.
(b) If it is determined that there is damage that may negatively
impact the intrinsic safety, the PAPR shall be immediately removed from
service.
(c) The CleanSpace EX user shall conduct daily examinations of the
filter and replace as needed.
(d) When fitting a new filter on the CleanSpace EX, the Blocked
Filter Alarm shall be tested by the user before the PAPR is put back
into service.
(e) CleanSpace EX units shall be charged outby the last open
crosscut and shall utilize the manufacturer approved battery charger.
CleanSpace EX charging stations located underground shall be enclosed
in a properly constructed steel box designed for such purpose.
(f) A qualified person under 30 CFR 75.151 shall monitor for
methane as is required by the standard in the affected areas of the
mine.
(g) The operator shall comply with all requirements of 30 CFR
75.323. The CleanSpace EX shall not be used if methane is detected in
concentrations at or above 1.0 percent methane. When 1.0 percent or
more methane is detected while the CleanSpace EX is being used, the
equipment shall be deenergized immediately. When 1.5 percent or more
methane is detected, the CleanSpace EX shall be withdrawn from the
affected area outby the last open crosscut.
(h) Employees shall be trained on how to properly use and take care
of the CleanSpace EX according to manufacturer guidelines as well as
all stipulations of the Decision and Order. Qualified miners shall
receive training regarding the information in the Decision and Order
before using equipment in the relevant part of the mine. A record of
the training shall be kept and made available upon request.
(i) Within 60 days of the Decision and Order becoming finalized,
the petitioner shall submit proposed revisions to the mine ventilation
plan per 30 CFR 75.370, to be approved under the 30 CFR part 48
training plan by the Coal Mine Safety and Health District Manager. The
revisions shall specify initial and refresher training. When the
training is conducted, a MSHA Certificate of Training (Form 5000-23)
shall be completed, with comments on the certificate noting non-
permissible testing equipment training.
The petitioner asserts that the alternative method proposed will at
all times guarantee no less than the same measure of protection
afforded the miners under the mandatory standard.
Song-ae Aromie Noe,
Director, Office of Standards, Regulations, and Variances.
[FR Doc. 2022-28623 Filed 1-4-23; 8:45 am]
BILLING CODE 4520-43-P
</pre><script data-cfasync="false" src="/cdn-cgi/scripts/5c5dd728/cloudflare-static/email-decode.min.js"></script></body>
</html>Indexed from Federal Register on January 5, 2023.
This is legal information, not legal advice. Laws vary by jurisdiction and change frequently. Always verify current law with official sources and consult a licensed attorney in your jurisdiction for advice on your specific situation.