Airworthiness Directives; De Havilland Aircraft of Canada Limited (Type Certificate Previously Held by Bombardier, Inc.) Airplanes
Primary source
Metadata and text below are from the Federal Register, a public-domain U.S. government work. Always verify the official published version before relying on it for any legal matter.
Issuing agencies
Abstract
The FAA is adopting a new airworthiness directive (AD) for certain De Havilland Aircraft of Canada Limited Model DHC-8-402 airplanes. This AD was prompted by an investigation that found that the actual operating temperatures within the integrated flight cabinet (IFC) were significantly higher than anticipated during certification. This AD requires a modification to improve the IFC cooling capacity. The FAA is issuing this AD to address the unsafe condition on these products.
Full Text
<html>
<head>
<title>Federal Register, Volume 87 Issue 242 (Monday, December 19, 2022)</title>
</head>
<body><pre>
[Federal Register Volume 87, Number 242 (Monday, December 19, 2022)]
[Rules and Regulations]
[Pages 77485-77487]
From the Federal Register Online via the Government Publishing Office [<a href="http://www.gpo.gov">www.gpo.gov</a>]
[FR Doc No: 2022-27397]
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. FAA-2022-0993; Project Identifier MCAI-2022-00295-T;
Amendment 39-22262; AD 2022-25-06]
RIN 2120-AA64
Airworthiness Directives; De Havilland Aircraft of Canada Limited
(Type Certificate Previously Held by Bombardier, Inc.) Airplanes
AGENCY: Federal Aviation Administration (FAA), Department of
Transportation (DOT).
ACTION: Final rule.
-----------------------------------------------------------------------
SUMMARY: The FAA is adopting a new airworthiness directive (AD) for
certain De Havilland Aircraft of Canada Limited Model DHC-8-402
airplanes. This AD was prompted by an investigation that found that the
actual operating temperatures within the integrated flight cabinet
(IFC) were significantly higher than anticipated during certification.
This AD requires a modification to improve the IFC cooling capacity.
The FAA is issuing this AD to address the unsafe condition on these
products.
DATES: This AD is effective January 23, 2023.
The Director of the Federal Register approved the incorporation by
reference of a certain publication listed in this AD as of January 23,
2023.
ADDRESSES:
AD Docket: You may examine the AD docket at <a href="http://regulations.gov">regulations.gov</a> under
Docket No. FAA-2022-0993; or in person at Docket Operations between 9
a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD
docket contains this final rule, the mandatory continuing airworthiness
information (MCAI), any comments received, and other information. The
address for Docket Operations is U.S. Department of Transportation,
Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200
New Jersey Avenue SE, Washington, DC 20590.
Material Incorporated by Reference:
<bullet> For service information identified in this final rule,
contact De Havilland Aircraft of Canada Limited, Dash 8 Series Customer
Response Centre, 5800 Explorer Drive, Mississauga, Ontario, L4W 5K9,
Canada; telephone North America (toll-free): 855-310-1013, Direct: 647-
277-5820; email <a href="/cdn-cgi/l/email-protection#45312d21057924652d37202378" http: dehavilland.com">dehavilland.com</a>">thd@<a href="http://dehavilland.com">dehavilland.com</a></a>; website <a href="http://dehavilland.com">dehavilland.com</a>.
<bullet> You may view this service information at the FAA,
Airworthiness Products Section, Operational Safety Branch, 2200 South
216th St., Des Moines, WA. For information on the availability of this
material at the FAA, call 206-231-3195. It is also available at
<a href="http://regulations.gov">regulations.gov</a> under Docket No. FAA-2022-0993.
FOR FURTHER INFORMATION CONTACT: Gabriel Kim, Aerospace Engineer,
Mechanical Systems and Administrative Services Section, FAA, New York
ACO Branch, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590;
telephone 516-228-7300; email <a href="/cdn-cgi/l/email-protection#dde4f0bcabaef0b3a4bcbeb2f0beb2ae9dbbbcbcf3bab2ab"><span class="__cf_email__" data-cfemail="e6dfcb879095cb889f878589cb858995a6808787c8818990">[email protected]</span></a>.
SUPPLEMENTARY INFORMATION:
Background
The FAA issued a notice of proposed rulemaking (NPRM) to amend 14
CFR part 39 by adding an AD that would apply to certain De Havilland
Aircraft of Canada Limited Model DHC-8-402 airplanes. The NPRM
published in the Federal Register on August 12, 2022 (87 FR 49776). The
NPRM was prompted by AD CF-2022-09, dated March 3, 2022, issued by
Transport Canada, which is the aviation authority for Canada (referred
to after this as the MCAI) (Transport Canada CF-2022-09). The MCAI
states that as a result of higher-than-expected failure rates in
service, the supplier's investigation found that actual operating
temperatures within the IFC were significantly higher than anticipated
during certification. Consequently, the reliability of the IFC module
does not meet safety objectives. The MCAI further states this failure
mode could lead to uncontrolled autopilot pitch trim servo runaway and/
or failure of the stall warning and stick pusher, resulting in reduced
controllability of the airplane.
In the NPRM, the FAA proposed to require a modification to improve
the IFC cooling capacity. The FAA is issuing this AD to address the
unsafe condition on these products.
You may examine the MCAI in the AD docket at <a href="http://regulations.gov">regulations.gov</a> under
Docket No. FAA-2022-0993.
Discussion of Final Airworthiness Directive
Comments
The FAA received comments from the Air Line Pilots Association,
International (ALPA), who supported the NPRM without change.
The FAA received an additional comment from Horizon Air. The
following presents the comment received on the NPRM and the FAA's
response to each comment.
Request To Exclude Job Set-Up and Close-Out
Horizon Air requested that the final rule mandate only paragraph
3.B., ``Procedure,'' of the Accomplishment Instructions of De Havilland
Service Bulletin 84-21-24, Revision B, dated Oct 13, 2021, because that
corrects the unsafe condition. Horizon Air stated that paragraph 3.A.
``Job Set-up,'' and paragraph 3.C., ``Close Out'' of the Accomplishment
Instructions of De Havilland Service Bulletin 84-21-24, Revision B,
dated Oct 13, 2021, do not directly correct the unsafe condition. The
commenter stated that incorporating the ``Job Set-up'' and ``Close
Out'' procedures as a requirement of the AD restricts an operator's
ability to perform other maintenance in conjunction with the
incorporation of the service information.
The FAA agrees with the requested change for the reasons provided
by the commenter. In addition, this change corresponds to Transport
Canada AD CF-2022-09, dated March 3, 2022. The FAA has revised
paragraph (g) of this AD accordingly.
Conclusion
This product has been approved by the aviation authority of another
[[Page 77486]]
country and is approved for operation in the United States. Pursuant to
the FAA's bilateral agreement with this State of Design Authority, it
has notified the FAA of the unsafe condition described in the MCAI
referenced above. The FAA reviewed the relevant data, considered the
comments received, and determined that air safety requires adopting
this AD as proposed. Accordingly, the FAA is issuing this AD to address
the unsafe condition on this product. Except for minor editorial
changes, and any other changes described previously, this AD is adopted
as proposed in the NPRM. None of the changes will increase the economic
burden on any operator.
Related Service Information Under 1 CFR Part 51
De Havilland Aircraft of Canada Limited has issued Service Bulletin
84-21-24, Revision B, dated October 13, 2021. This service information
specifies procedures for a modification to improve the IFC cooling
capacity. The tasks include reworking the forward and aft avionics rack
side panels, removing the piccolo tube assemblies, doing a general
visual inspection for contamination of the IFCs and avionics rack,
cleaning any contamination found, installing and routing new cooling
ducts, and installing two new extraction plenums in the avionics rack
cooling system.
This service information is reasonably available because the
interested parties have access to it through their normal course of
business or by the means identified in the ADDRESSES section.
Costs of Compliance
The FAA estimates that this AD affects 56 airplanes of U.S.
registry. The FAA estimates the following costs to comply with this AD:
Estimated Costs for Required Actions
----------------------------------------------------------------------------------------------------------------
Cost per Cost on U.S.
Labor cost Parts cost product operators
----------------------------------------------------------------------------------------------------------------
11 work-hours x $85 per hour = $935.......................... $6,950 $7,885 $441,560
----------------------------------------------------------------------------------------------------------------
The FAA has included all known costs in its cost estimate.
According to the manufacturer, however, some or all of the costs of
this AD may be covered under warranty, thereby reducing the cost impact
on affected operators.
Authority for This Rulemaking
Title 49 of the United States Code specifies the FAA's authority to
issue rules on aviation safety. Subtitle I, section 106, describes the
authority of the FAA Administrator. Subtitle VII: Aviation Programs,
describes in more detail the scope of the Agency's authority.
The FAA is issuing this rulemaking under the authority described in
Subtitle VII, Part A, Subpart III, Section 44701: General requirements.
Under that section, Congress charges the FAA with promoting safe flight
of civil aircraft in air commerce by prescribing regulations for
practices, methods, and procedures the Administrator finds necessary
for safety in air commerce. This regulation is within the scope of that
authority because it addresses an unsafe condition that is likely to
exist or develop on products identified in this rulemaking action.
Regulatory Findings
This AD will not have federalism implications under Executive Order
13132. This AD will not have a substantial direct effect on the States,
on the relationship between the national government and the States, or
on the distribution of power and responsibilities among the various
levels of government.
For the reasons discussed above, I certify that this AD:
(1) Is not a ``significant regulatory action'' under Executive
Order 12866,
(2) Will not affect intrastate aviation in Alaska, and
(3) Will not have a significant economic impact, positive or
negative, on a substantial number of small entities under the criteria
of the Regulatory Flexibility Act.
List of Subjects in 14 CFR Part 39
Air transportation, Aircraft, Aviation safety, Incorporation by
reference, Safety.
The Amendment
Accordingly, under the authority delegated to me by the
Administrator, the FAA amends 14 CFR part 39 as follows:
PART 39--AIRWORTHINESS DIRECTIVES
0
1. The authority citation for part 39 continues to read as follows:
Authority: 49 U.S.C. 106(g), 40113, 44701.
Sec. 39.13 [Amended]
0
2. The FAA amends Sec. 39.13 by adding the following new airworthiness
directive:
2022-25-06 De Havilland Aircraft of Canada Limited (Type Certificate
Previously Held by Bombardier, Inc.): Amendment 39-22262; Docket No.
FAA-2022-0993; Project Identifier MCAI-2022-00295-T
(a) Effective Date
This airworthiness directive (AD) is effective January 23, 2023.
(b) Affected ADs
None.
(c) Applicability
This AD applies to De Havilland Aircraft of Canada Limited (Type
Certificate previously held by Bombardier Inc.) Model DHC-8-402
airplanes, certificated in any category, serial numbers 4095 through
4633 inclusive.
(d) Subject
Air Transport Association (ATA) of America Code 21, Air
Conditioning System.
(e) Unsafe Condition
This AD was prompted by an investigation that found that the
actual operating temperatures within the integrated flight cabinet
(IFC) were significantly higher than anticipated during the
certification. Consequently, the reliability of the IFC module does
not meet safety objectives. The FAA is issuing this AD to address
the high operating temperatures within the IFC, which could lead to
uncontrolled autopilot pitch trim servo runaway and failure of the
stall warning and stick pusher, resulting in reduced controllability
of the airplane.
(f) Compliance
Comply with this AD within the compliance times specified,
unless already done.
(g) Required Actions
Within 8,000 flight hours or 48 months, whichever occurs first,
from the effective date of this AD, do a modification to improve the
IFC cooling capacity, in accordance with paragraph 3.B.,
``Procedure,'' of the Accomplishment Instructions of De Havilland
Aircraft of Canada Limited Service Bulletin 84-21-24, Revision B,
dated Oct 13, 2021.
(h) Credit for Previous Actions
This paragraph provides credit for actions required by paragraph
(g) of this AD, if those actions were performed before the effective
date of this AD using De Havilland Aircraft
[[Page 77487]]
of Canada Limited Service Bulletin 84-21-24, Revision A, dated
August 20, 2021.
(i) Other FAA AD Provisions
The following provisions also apply to this AD:
(1) Alternative Methods of Compliance (AMOCs): The Manager, New
York ACO Branch, FAA, has the authority to approve AMOCs for this
AD, if requested using the procedures found in 14 CFR 39.19. In
accordance with 14 CFR 39.19, send your request to your principal
inspector or responsible Flight Standards Office, as appropriate. If
sending information directly to the manager of the certification
office, send it to ATTN: Program Manager, Continuing Operational
Safety, FAA, New York ACO Branch, 1600 Stewart Avenue, Suite 410,
Westbury, NY 11590; telephone 516-228-7300; fax 516-794-5531. Before
using any approved AMOC, notify your appropriate principal
inspector, or lacking a principal inspector, the manager of the
responsible Flight Standards Office.
(2) Contacting the Manufacturer: For any requirement in this AD
to obtain instructions from a manufacturer, the instructions must be
accomplished using a method approved by the Manager, New York ACO
Branch, FAA; or Transport Canada; or De Havilland Aircraft of Canada
Limited's Transport Canada Design Approval Organization (DAO). If
approved by the DAO, the approval must include the DAO-authorized
signature.
(j) Additional Information
(1) Refer to Transport Canada AD CF-2022-09, dated March 3,
2022, for related information. This Transport Canada AD may be found
in the AD docket at <a href="http://regulations.gov">regulations.gov</a> under Docket No. FAA-2022-0993.
(2) For more information about this AD, contact Gabriel Kim,
Aerospace Engineer, Mechanical Systems and Administrative Services
Section, FAA, New York ACO Branch, 1600 Stewart Avenue, Suite 410,
Westbury, NY 11590; telephone 516-228-7300; email <a href="/cdn-cgi/l/email-protection#251c08445356084b5c44464a08464a56654344440b424a53"><span class="__cf_email__" data-cfemail="85bca8e4f3f6a8ebfce4e6eaa8e6eaf6c5e3e4e4abe2eaf3">[email protected]</span></a>.
(3) Service information identified in this AD that is not
incorporated by reference is available at the addresses specified in
paragraphs (k)(3) and (4) of this AD.
(k) Material Incorporated by Reference
(1) The Director of the Federal Register approved the
incorporation by reference of the service information listed in this
paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.
(2) You must use this service information as applicable to do
the actions required by this AD, unless this AD specifies otherwise.
(i) De Havilland Aircraft of Canada Limited Service Bulletin 84-
21-24, Revision B, dated Oct 13, 2021.
(ii) [Reserved]
(3) For service information identified in this AD, contact De
Havilland Aircraft of Canada Limited, Dash 8 Series Customer
Response Centre, 5800 Explorer Drive, Mississauga, Ontario, L4W 5K9,
Canada; telephone North America (toll-free): 855-310-1013, Direct:
647-277-5820; email <a href="/cdn-cgi/l/email-protection#25514d41651944054d57404318" http: dehavilland.com">dehavilland.com</a>">thd@<a href="http://dehavilland.com">dehavilland.com</a></a>; website <a href="http://dehavilland.com">dehavilland.com</a>.
(4) You may view this service information at the FAA,
Airworthiness Products Section, Operational Safety Branch, 2200
South 216th St., Des Moines, WA. For information on the availability
of this material at the FAA, call 206-231-3195.
(5) You may view this service information that is incorporated
by reference at the National Archives and Records Administration
(NARA). For information on the availability of this material at
NARA, email <a href="/cdn-cgi/l/email-protection#8fe9fda1e6e1fcffeaecfbe6e0e1cfe1eefdeea1e8e0f9"><span class="__cf_email__" data-cfemail="573125793e3924273234233e3839173936253679303821">[email protected]</span></a>, or go to: <a href="http://www.archives.gov/federal-register/cfr/ibr-locations.html">www.archives.gov/federal-register/cfr/ibr-locations.html</a>.
Issued on November 30, 2022.
Christina Underwood,
Acting Director, Compliance & Airworthiness Division, Aircraft
Certification Service.
[FR Doc. 2022-27397 Filed 12-16-22; 8:45 am]
BILLING CODE 4910-13-P
</pre><script data-cfasync="false" src="/cdn-cgi/scripts/5c5dd728/cloudflare-static/email-decode.min.js"></script></body>
</html>This is legal information, not legal advice. Laws vary by jurisdiction and change frequently. Always verify current law with official sources and consult a licensed attorney in your jurisdiction for advice on your specific situation.