Rule2022-27021
Airworthiness Directives; Embraer S.A. (Type Certificate Previously Held by Yaborã Indústria Aeronáutica S.A.; Embraer S.A.) Airplanes
Primary source
Metadata and text below are from the Federal Register, a public-domain U.S. government work. Always verify the official published version before relying on it for any legal matter.
Published
December 14, 2022
Effective
December 29, 2022
Issuing agencies
Transportation DepartmentFederal Aviation Administration
Abstract
The FAA is adopting a new airworthiness directive (AD) for certain Embraer S.A. Model ERJ 190-300 and -400 airplanes. This AD was prompted by the identification of a quality escape in the installation of certain fasteners of the lower beam (frame) splices of the overwing emergency exit (OWE) doors. This AD requires inspection, rework, if applicable, and replacement of the splice fasteners of the right-hand (RH) and left-hand (LH) OWE doors, as specified in an Ag[ecirc]ncia Nacional de Avia[ccedil][atilde]o Civil (ANAC) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Full Text
<html>
<head>
<title>Federal Register, Volume 87 Issue 239 (Wednesday, December 14, 2022)</title>
</head>
<body><pre>
[Federal Register Volume 87, Number 239 (Wednesday, December 14, 2022)]
[Rules and Regulations]
[Pages 76410-76413]
From the Federal Register Online via the Government Publishing Office [<a href="http://www.gpo.gov">www.gpo.gov</a>]
[FR Doc No: 2022-27021]
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. FAA-2022-1489; Project Identifier MCAI-2022-00865-T;
Amendment 39-22256; AD 2022-24-16]
RIN 2120-AA64
Airworthiness Directives; Embraer S.A. (Type Certificate
Previously Held by Yabor[atilde] Ind[uacute]stria Aeron[aacute]utica
S.A.; Embraer S.A.) Airplanes
AGENCY: Federal Aviation Administration (FAA), DOT.
ACTION: Final rule; request for comments.
-----------------------------------------------------------------------
SUMMARY: The FAA is adopting a new airworthiness directive (AD) for
certain Embraer S.A. Model ERJ 190-300 and -400 airplanes. This AD was
prompted by the identification of a quality escape in the installation
of certain fasteners of the lower beam (frame) splices of the overwing
emergency exit (OWE) doors. This AD requires inspection, rework, if
applicable, and replacement of the splice fasteners of the right-hand
(RH) and left-hand (LH) OWE doors, as specified in an Ag[ecirc]ncia
Nacional de Avia[ccedil][atilde]o Civil (ANAC) AD, which is
incorporated by reference. The FAA is issuing this AD to address the
unsafe condition on these products.
DATES: This AD becomes effective December 29, 2022.
The Director of the Federal Register approved the incorporation by
reference of a certain publication listed in this AD as of December 29,
2022.
The FAA must receive comments on this AD by January 30, 2023.
ADDRESSES: You may send comments, using the procedures found in 14 CFR
11.43 and 11.45, by any of the following methods:
<bullet> Federal eRulemaking Portal: Go to <a href="http://regulations.gov">regulations.gov</a>. Follow
the instructions for submitting comments.
<bullet> Fax: 202-493-2251.
<bullet> Mail: U.S. Department of Transportation, Docket
Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New
Jersey Avenue SE, Washington, DC 20590.
<bullet> Hand Delivery: Deliver to Mail address above between 9
a.m. and 5 p.m., Monday through Friday, except Federal holidays.
AD Docket: You may examine the AD docket at <a href="http://regulations.gov">regulations.gov</a> under
Docket No. FAA-2022-1489; or in person at Docket Operations between 9
a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD
docket
[[Page 76411]]
contains this final rule, the mandatory continuing airworthiness
information (MCAI), any comments received, and other information. The
street address for Docket Operations is listed above.
Material Incorporated by Reference:
<bullet> For ANAC material incorporated by reference in this AD,
contact National Civil Aviation Agency (ANAC), Aeronautical Products
Certification Branch (GGCP), Rua Dr. Orlando Feirabend Filho, 230--
Centro Empresarial Aquarius--Torre B--Andares 14 a 18, Parque
Residencial Aquarius, CEP 12.246-190--S[atilde]o Jos[eacute] dos
Campos--SP, Brazil; telephone 55 (12) 3203-6600; email <a href="/cdn-cgi/l/email-protection#2959484a69154809415b4c4f14" http: anac.gov">anac.gov</a>.br">pac@<a href="http://anac.gov">anac.gov</a>.br</a>;
website <a href="http://anac.gov">anac.gov</a>.br/en/. You may find this material on the ANAC website
at <a href="http://sistemas.anac.gov">sistemas.anac.gov</a>.br/certificacao/DA/DAE.asp.
<bullet> You may view this service information at the FAA,
Airworthiness Products Section, Operational Safety Branch, 2200 South
216th St., Des Moines, WA. For information on the availability of this
material at the FAA, call 206-231-3195. It is also available at
<a href="http://regulations.gov">regulations.gov</a> under Docket No. FAA-2022-1489.
FOR FURTHER INFORMATION CONTACT: Hassan Ibrahim, Aerospace Engineer,
Large Aircraft Section, FAA, International Validation Branch, 2200
South 216th St., Des Moines, WA 98198; telephone 206-231-3653; email
<a href="/cdn-cgi/l/email-protection#0e466f7d7d6f60204320476c7c6f6667634e686f6f20696178"><span class="__cf_email__" data-cfemail="2f674e5c5c4e41016201664d5d4e4746426f494e4e01484059">[email protected]</span></a>.
SUPPLEMENTARY INFORMATION:
Comments Invited
The FAA invites you to send any written data, views, or arguments
about this final rule. Send your comments to an address listed under
ADDRESSES. Include ``Docket No. FAA-2022-1489; Project Identifier MCAI-
2022-00865-T'' at the beginning of your comments. The most helpful
comments reference a specific portion of the final rule, explain the
reason for any recommended change, and include supporting data. The FAA
will consider all comments received by the closing date and may amend
this final rule because of those comments.
Except for Confidential Business Information (CBI) as described in
the following paragraph, and other information as described in 14 CFR
11.35, the FAA will post all comments received, without change, to
<a href="http://regulations.gov">regulations.gov</a>, including any personal information you provide. The
agency will also post a report summarizing each substantive verbal
contact received about this final rule.
Confidential Business Information
CBI is commercial or financial information that is both customarily
and actually treated as private by its owner. Under the Freedom of
Information Act (FOIA) (5 U.S.C. 552), CBI is exempt from public
disclosure. If your comments responsive to this AD contain commercial
or financial information that is customarily treated as private, that
you actually treat as private, and that is relevant or responsive to
this AD, it is important that you clearly designate the submitted
comments as CBI. Please mark each page of your submission containing
CBI as ``PROPIN.'' The FAA will treat such marked submissions as
confidential under the FOIA, and they will not be placed in the public
docket of this AD. Submissions containing CBI should be sent to Hassan
Ibrahim, Aerospace Engineer, Large Aircraft Section, FAA, International
Validation Branch, 2200 South 216th St., Des Moines, WA 98198;
telephone 206-231-3653; email <a href="/cdn-cgi/l/email-protection#2068415353414e0e6d0e6942524148494d604641410e474f56"><span class="__cf_email__" data-cfemail="b7ffd6c4c4d6d999fa99fed5c5d6dfdedaf7d1d6d699d0d8c1">[email protected]</span></a>. Any commentary
that the FAA receives which is not specifically designated as CBI will
be placed in the public docket for this rulemaking.
Background
ANAC, which is the aviation authority for Brazil, has issued ANAC
AD 2022-06-01, effective June 30, 2022; corrected July 8, 2022 (ANAC AD
2022-06-01) (also referred to as the MCAI), to correct an unsafe
condition for certain Embraer S.A. Model ERJ 190-300 and -400
airplanes. The MCAI states that a quality escape has been identified in
the installation of certain fasteners of the lower beam (frame) splices
of the OWE doors, due to the use of incorrect tools during the
installation process. This incorrect installation could lead to the
detachment of the splices from the lower beam (frame) of the door,
which is a principal structure element, causing structural damage to
the lower part of the door, sudden loss of pressurization, and
emergency descent of the airplane. The MCAI specifies inspection,
rework, if applicable, and replacement of the splice fasteners of the
RH and LH OWE doors with new splice fasteners with the same part number
(P/N).
You may examine the MCAI in the AD docket at <a href="http://regulations.gov">regulations.gov</a> under
Docket No. FAA-2022-1489.
Related Service Information Under 1 CFR Part 51
ANAC AD 2022-06-01 specifies procedures for a detailed inspection
for signs of deformation and missing or loose fasteners, rework, if
applicable, and replacement of the splice fasteners of the RH and LH
OWE doors. This material is reasonably available because the interested
parties have access to it through their normal course of business or by
the means identified in the ADDRESSES section.
FAA's Determination
This product has been approved by the aviation authority of another
country and is approved for operation in the United States. Pursuant to
the FAA's bilateral agreement with this State of Design Authority, it
has notified the FAA of the unsafe condition described in the MCAI
described above. The FAA is issuing this AD after determining that the
unsafe condition described previously is likely to exist or develop on
other products of the same type design.
Requirements of This AD
This AD requires accomplishing the actions specified in ANAC AD
2022-06-01 described previously, except for any differences identified
as exceptions in the regulatory text of this AD.
Explanation of Required Compliance Information
In the FAA's ongoing efforts to improve the efficiency of the AD
process, the FAA developed a process to use some civil aviation
authority (CAA) ADs as the primary source of information for compliance
with requirements for corresponding FAA ADs. The FAA has been
coordinating this process with manufacturers and CAAs. As a result,
ANAC AD 2022-06-01 is incorporated by reference in this AD. This AD
requires compliance with ANAC AD 2022-06-01 in its entirety through
that incorporation, except for any differences identified as exceptions
in the regulatory text of this AD. Service information required by ANAC
AD 2022-06-01 for compliance will be available at <a href="http://regulations.gov">regulations.gov</a> under
Docket No. FAA-2022-1489 after this AD is published.
FAA's Justification and Determination of the Effective Date
Section 553(b)(3)(B) of the Administrative Procedure Act (APA) (5
U.S.C. 551 et seq.) authorizes agencies to dispense with notice and
comment procedures for rules when the agency, for ``good cause,'' finds
that those procedures are ``impracticable, unnecessary, or contrary to
the public interest.'' Under this section, an agency, upon finding good
cause, may issue a final rule without providing notice and seeking
comment prior to issuance. Further, section 553(d) of the APA
authorizes agencies to make rules
[[Page 76412]]
effective in less than thirty days, upon a finding of good cause.
There are currently no domestic operators of these products.
Accordingly, notice and opportunity for prior public comment are
unnecessary, pursuant to 5 U.S.C. 553(b)(3)(B). In addition, for the
forgoing reason(s), the FAA finds that good cause exists pursuant to 5
U.S.C. 553(d) for making this amendment effective in less than 30 days.
Regulatory Flexibility Act (RFA)
The requirements of the RFA do not apply when an agency finds good
cause pursuant to 5 U.S.C. 553 to adopt a rule without prior notice and
comment. Because the FAA has determined that it has good cause to adopt
this rule without notice and comment, RFA analysis is not required.
Costs of Compliance
Currently, there are no affected U.S.-registered airplanes. If an
affected airplane is imported and placed on the U.S. Register in the
future, the FAA provides the following cost estimates to comply with
this AD:
Estimated Costs for Required Actions
------------------------------------------------------------------------
Cost per
Labor cost Parts cost product
------------------------------------------------------------------------
12.5 work-hours x $85 per hour = Negligible.......... $1,062.50
$1,062.50.
------------------------------------------------------------------------
The FAA has received no definitive data on which to base the cost
estimates for the on-condition rework specified in this AD.
Authority for This Rulemaking
Title 49 of the United States Code specifies the FAA's authority to
issue rules on aviation safety. Subtitle I, section 106, describes the
authority of the FAA Administrator. Subtitle VII: Aviation Programs,
describes in more detail the scope of the Agency's authority.
The FAA is issuing this rulemaking under the authority described in
Subtitle VII, Part A, Subpart III, Section 44701: General requirements.
Under that section, Congress charges the FAA with promoting safe flight
of civil aircraft in air commerce by prescribing regulations for
practices, methods, and procedures the Administrator finds necessary
for safety in air commerce. This regulation is within the scope of that
authority because it addresses an unsafe condition that is likely to
exist or develop on products identified in this rulemaking action.
Regulatory Findings
This AD will not have federalism implications under Executive Order
13132. This AD will not have a substantial direct effect on the States,
on the relationship between the national government and the States, or
on the distribution of power and responsibilities among the various
levels of government.
For the reasons discussed above, I certify that this AD:
(1) Is not a ``significant regulatory action'' under Executive
Order 12866, and
(2) Will not affect intrastate aviation in Alaska.
List of Subjects in 14 CFR Part 39
Air transportation, Aircraft, Aviation safety, Incorporation by
reference, Safety.
The Amendment
Accordingly, under the authority delegated to me by the
Administrator, the FAA amends 14 CFR part 39 as follows:
PART 39--AIRWORTHINESS DIRECTIVES
0
1. The authority citation for part 39 continues to read as follows:
Authority: 49 U.S.C. 106(g), 40113, 44701.
Sec. 39.13 [Amended]
0
2. The FAA amends Sec. 39.13 by adding the following new airworthiness
directive:
2022-24-16 Embraer S.A. (Type Certificate Previously Held by
Yabor[atilde] Ind[uacute]stria Aeron[aacute]utica S.A.; Embraer
S.A.): Amendment 39-22256; Docket No. FAA-2022-1489; Project
Identifier MCAI-2022-00865-T.
(a) Effective Date
This airworthiness directive (AD) is effective December 29,
2022.
(b) Affected ADs
None.
(c) Applicability
This AD applies to Embraer S.A. (Type Certificate previously
held by Yabor[atilde] Ind[uacute]stria Aeron[aacute]utica S.A.;
Embraer S.A.) Model ERJ 190-300 and -400 airplanes, certificated in
any category, as identified in Ag[ecirc]ncia Nacional de
Avia[ccedil][atilde]o Civil (ANAC) AD 2022-06-01, effective June 30,
2022; corrected July 8, 2022 (ANAC AD 2022-06-01).
(d) Subject
Air Transport Association (ATA) of America Code 52, Doors.
(e) Unsafe Condition
This AD was prompted by the identification of a quality escape
in the installation of certain fasteners of the lower beam (frame)
splices of the overwing emergency exit doors, due to the use of
incorrect tools during the installation process. The FAA is issuing
this AD to address this incorrect installation, which may lead to
the detachment of the splices from the lower beam (frame) of the
door. The unsafe condition, if not addressed, could result in
structural damage to the lower part of the door, sudden loss of
pressurization, and emergency descent of the airplane.
(f) Compliance
Comply with this AD within the compliance times specified,
unless already done.
(g) Requirements
Except as specified in paragraph (h) of this AD: Comply with all
required actions and compliance times specified in, and in
accordance with, ANAC AD 2022-06-01.
(h) Exceptions to ANAC AD 2022-06-01
(1) Where ANAC AD 2022-06-01 refers to its effective date, this
AD requires using the effective date of this AD.
(2) Paragraph (b) ``Alternative methods of compliance (AMOCs)''
of ANAC AD 2022-06-01 is not adopted by this AD.
(3) ANAC AD 2022-06-01 does not specify compliance times for the
actions specified in paragraphs (a)(1)(i) and (ii) of ANAC AD 2022-
06-01. For this AD, after accomplishing the inspection required by
paragraph (a)(1) of ANAC AD 2022-06-01, the action required by
paragraph (a)(1)(i) or (ii) of ANAC AD 2022-06-01, as applicable,
must be done before further flight.
(i) No Reporting Requirement
Although the service information referenced in ANAC AD 2022-06-
01 specifies to submit certain information to the manufacturer, this
AD does not include that requirement.
(j) Additional AD Provisions
The following provisions also apply to this AD:
(1) Alternative Methods of Compliance (AMOCs): The Manager,
International
[[Page 76413]]
Validation Branch, FAA, has the authority to approve AMOCs for this
AD, if requested using the procedures found in 14 CFR 39.19. In
accordance with 14 CFR 39.19, send your request to your principal
inspector or responsible Flight Standards Office, as appropriate. If
sending information directly to the International Validation Branch,
send it to the attention of the person identified in paragraph (k)
of this AD. Information may be emailed to: <a href="/cdn-cgi/l/email-protection#291004687f7a0468607b041e1a19046864666a694f4848074e465f"><span class="__cf_email__" data-cfemail="3f06127e696c127e766d12080c0f127e72707c7f595e5e11585049">[email protected]</span></a>. Before using any approved AMOC, notify your
appropriate principal inspector, or lacking a principal inspector,
the manager of the responsible Flight Standards Office.
(2) Contacting the Manufacturer: For any requirement in this AD
to obtain instructions from a manufacturer, the instructions must be
accomplished using a method approved by the Manager, International
Validation Branch, FAA; or ANAC; or ANAC's authorized Designee. If
approved by the ANAC Designee, the approval must include the
Designee's authorized signature.
(k) Additional Information
For more information about this AD, contact Hassan Ibrahim,
Aerospace Engineer, Large Aircraft Section, FAA, International
Validation Branch, 2200 South 216th St., Des Moines, WA 98198;
telephone 206-231-3653; email <a href="/cdn-cgi/l/email-protection#034b627070626d2d4e2d4a6171626b6a6e436562622d646c75"><span class="__cf_email__" data-cfemail="d39bb2a0a0b2bdfd9efd9ab1a1b2bbbabe93b5b2b2fdb4bca5">[email protected]</span></a>.
(l) Material Incorporated by Reference
(1) The Director of the Federal Register approved the
incorporation by reference of the service information listed in this
paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.
(2) You must use this service information as applicable to do
the actions required by this AD, unless this AD specifies otherwise.
(i) Ag[ecirc]ncia Nacional de Avia[ccedil][atilde]o Civil (ANAC)
AD 2022-06-01, effective June 30, 2022; corrected July 8, 2022.
(ii) [Reserved]
(3) For ANAC AD 2022-06-01, contact National Civil Aviation
Agency (ANAC), Aeronautical Products Certification Branch (GGCP),
Rua Dr. Orlando Feirabend Filho, 230--Centro Empresarial Aquarius--
Torre B--Andares 14 a 18, Parque Residencial Aquarius, CEP 12.246-
190--S[atilde]o Jos[eacute] dos Campos--SP, Brazil; telephone 55
(12) 3203-6600; email: <a href="/cdn-cgi/l/email-protection#2c5c4d4f6c104d0c445e494a11" http: anac.gov">anac.gov</a>.br">pac@<a href="http://anac.gov">anac.gov</a>.br</a>; internet <a href="http://anac.gov">anac.gov</a>.br/en/.
You may find this ANAC AD on the ANAC website at
<a href="http://sistemas.anac.gov">sistemas.anac.gov</a>.br/certificacao/DA/DAE.asp.
(4) You may view this material at the FAA, Airworthiness
Products Section, Operational Safety Branch, 2200 South 216th St.,
Des Moines, WA. For information on the availability of this material
at the FAA, call 206-231-3195.
(5) You may view this material that is incorporated by reference
at the National Archives and Records Administration (NARA). For
information on the availability of this material at NARA, email
<a href="/cdn-cgi/l/email-protection#d0b6a2feb9bea3a0b5b3a4b9bfbe90beb1a2b1feb7bfa6"><span class="__cf_email__" data-cfemail="ccaabee2a5a2bfbca9afb8a5a3a28ca2adbeade2aba3ba">[email protected]</span></a>, or go to: <a href="http://www.archives.gov/federal-register/cfr/ibr-locations.html">www.archives.gov/federal-register/cfr/ibr-locations.html</a>.
Issued on November 18, 2022.
Christina Underwood,
Acting Director, Compliance & Airworthiness Division, Aircraft
Certification Service.
[FR Doc. 2022-27021 Filed 12-13-22; 8:45 am]
BILLING CODE 4910-13-P
</pre><script data-cfasync="false" src="/cdn-cgi/scripts/5c5dd728/cloudflare-static/email-decode.min.js"></script></body>
</html>Indexed from Federal Register on December 14, 2022.
This is legal information, not legal advice. Laws vary by jurisdiction and change frequently. Always verify current law with official sources and consult a licensed attorney in your jurisdiction for advice on your specific situation.