Proposed Rule2022-26970
Airworthiness Directives; Airbus SAS Airplanes
Primary source
Metadata and text below are from the Federal Register, a public-domain U.S. government work. Always verify the official published version before relying on it for any legal matter.
Published
December 15, 2022
Issuing agencies
Transportation DepartmentFederal Aviation Administration
Abstract
The FAA proposes to adopt a new airworthiness directive (AD) for certain Airbus SAS Model A350-941 and -1041 airplanes. This proposed AD was prompted by an in-service inspection that found overhead storage compartment (OHSC) crash rods that were disconnected. This proposed AD would require a one-time detailed inspection of the OHSC crash rods and, depending on findings, corrective actions, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.
Full Text
<html>
<head>
<title>Federal Register, Volume 87 Issue 240 (Thursday, December 15, 2022)</title>
</head>
<body><pre>
[Federal Register Volume 87, Number 240 (Thursday, December 15, 2022)]
[Proposed Rules]
[Pages 76589-76591]
From the Federal Register Online via the Government Publishing Office [<a href="http://www.gpo.gov">www.gpo.gov</a>]
[FR Doc No: 2022-26970]
=======================================================================
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. FAA-2022-1582; Project Identifier MCAI-2022-01232-T]
RIN 2120-AA64
Airworthiness Directives; Airbus SAS Airplanes
AGENCY: Federal Aviation Administration (FAA), DOT.
ACTION: Notice of proposed rulemaking (NPRM).
-----------------------------------------------------------------------
SUMMARY: The FAA proposes to adopt a new airworthiness directive (AD)
for certain Airbus SAS Model A350-941 and -1041 airplanes. This
proposed AD was prompted by an in-service inspection that found
overhead storage compartment (OHSC) crash rods that were disconnected.
This proposed AD would require a one-time detailed inspection of the
OHSC crash rods and, depending on findings, corrective actions, as
specified in a European Union Aviation Safety Agency (EASA) AD, which
is proposed for incorporation by reference (IBR). The FAA is proposing
this AD to address the unsafe condition on these products.
DATES: The FAA must receive comments on this proposed AD by January 30,
2023.
ADDRESSES: You may send comments, using the procedures found in 14 CFR
11.43 and 11.45, by any of the following methods:
<bullet> Federal eRulemaking Portal: Go to <a href="http://regulations.gov">regulations.gov</a>. Follow
the instructions for submitting comments.
<bullet> Fax: 202-493-2251.
<bullet> Mail: U.S. Department of Transportation, Docket
Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New
Jersey Avenue SE, Washington, DC 20590.
<bullet> Hand Delivery: Deliver to Mail address above between 9
a.m. and 5 p.m., Monday through Friday, except Federal holidays.
AD Docket: You may examine the AD docket at <a href="http://regulations.gov">regulations.gov</a> under
Docket No. FAA-2022-1582; or in person at Docket Operations between 9
a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD
docket contains this NPRM, the mandatory continuing airworthiness
information (MCAI), any comments received, and other information. The
street address for Docket Operations is listed above.
Material Incorporated by Reference:
<bullet> For EASA material that is proposed for IBR in this NPRM,
contact EASA, Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; telephone
+49 221 8999 000; email <a href="/cdn-cgi/l/email-protection#5c1d182f1c393d2f3d7239292e332c3d723929"><span class="__cf_email__" data-cfemail="d8999cab98bdb9abb9f6bdadaab7a8b9f6bdad">[email protected]</span></a>; website easa.europa.eu. You
may find this material on the EASA website at ad.easa.europa.eu. It is
also available at <a href="http://regulations.gov">regulations.gov</a> under Docket No. FAA-2022-1582.
<bullet> For Airbus service information identified in this NPRM,
contact Airbus SAS, Airworthiness Office--EAL, Rond-Point Emile
Dewoitine No: 2, 31700 Blagnac Cedex, France; telephone +33 5 61 93 36
96; fax +33 5 61 93 45 80; email <a href="/cdn-cgi/l/email-protection#2f4c40415b46415a4a4b024e465d58405d5b4746414a5c5c014e1c1a1f6f134e0f475d4a4912" http: airbus.com">airbus.com</a>">continued-airworthiness.a350@<a href="http://airbus.com">airbus.com</a></a>; website <a href="http://airbus.com">airbus.com</a>.
<bullet> You may view this service information at the FAA,
Airworthiness Products Section, Operational Safety Branch, 2200 South
216th St., Des Moines, WA. For information on the availability of this
material at the FAA, call 206-231-3195.
FOR FURTHER INFORMATION CONTACT: Dat Le, Aerospace Engineer, Large
Aircraft Section, FAA, International Validation Branch, 2200 South
216th St., Des Moines, WA 98198; telephone 516-228-7317; email
<a href="/cdn-cgi/l/email-protection#602401144e364e2c05200601014e070f16"><span class="__cf_email__" data-cfemail="236742570d750d6f46634542420d444c55">[email protected]</span></a>.
SUPPLEMENTARY INFORMATION:
Comments Invited
The FAA invites you to send any written relevant data, views, or
arguments about this proposal. Send your comments to an address listed
under ADDRESSES. Include ``Docket No. FAA-2022-1582; Project Identifier
MCAI-2022-01232-T'' at the beginning of your comments. The most helpful
comments reference a specific portion of the proposal, explain the
reason for any recommended change, and include supporting data. The FAA
will consider all comments received by the closing date and may amend
this proposal because of those comments.
Except for Confidential Business Information (CBI) as described in
the following paragraph, and other information as described in 14 CFR
11.35, the FAA will post all comments received, without change, to
<a href="http://regulations.gov">regulations.gov</a>, including any personal information you provide. The
agency will also post a report summarizing each substantive verbal
contact received about this NPRM.
Confidential Business Information
CBI is commercial or financial information that is both customarily
and actually treated as private by its owner. Under the Freedom of
Information Act (FOIA) (5 U.S.C. 552), CBI is exempt from public
disclosure. If your comments responsive to this NPRM contain commercial
or financial information that is customarily treated as private, that
you actually treat as private, and that is relevant or responsive to
this NPRM, it is important that you clearly designate the submitted
comments as CBI. Please mark each page of your submission containing
CBI as ``PROPIN.'' The FAA will treat such marked submissions as
confidential under the FOIA, and they will not be placed in the public
docket of this NPRM. Submissions containing CBI should be sent to Dat
Le, Aerospace Engineer, Large Aircraft Section, FAA, International
Validation Branch, 2200 South 216th St., Des Moines, WA 98198;
telephone 516-228-7317; email <a href="/cdn-cgi/l/email-protection#4b0f2a3f651d65072e0b2d2a2a652c243d"><span class="__cf_email__" data-cfemail="89cde8fda7dfa7c5ecc9efe8e8a7eee6ff">[email protected]</span></a>. Any commentary that the
FAA receives which is not specifically designated as CBI will be placed
in the public docket for this rulemaking.
Background
EASA, which is the Technical Agent for the Member States of the
European Union, has issued EASA AD 2022-0186, dated September 13, 2022
(EASA AD 2022-0186) (also referred to as the MCAI), to correct an
unsafe condition for certain Airbus SAS Model A350-941 and -1041
airplanes. The MCAI states that an in-service inspection found OHSC
crash rods that were disconnected. The investigation
[[Page 76590]]
conducted by the manufacturer determined that this incorrect
installation was due to human error in the final assembly line. This
condition, if not corrected, could affect the structural integrity of
the OHSC under emergency landing loads, which could lead to OHSC
detachment, resulting in injury to occupants and blocking an escape
path during an emergency evacuation.
You may examine the MCAI in the AD docket at <a href="http://regulations.gov">regulations.gov</a> under
Docket No. FAA-2022-1582.
Related Service Information Under 1 CFR Part 51
EASA AD 2022-0186 specifies procedures for a one-time detailed
inspection for any defect (i.e., OHSC crash rod is disconnected or the
quick connections are unlocked) of the OHSC crash rods, and, depending
on findings, corrective actions (i.e., installation or locking of the
quick connections on the OHSC crash rods.
The FAA also reviewed Airbus Service Bulletin A350-53-P074, dated
July 29, 2022, which identifies the affected manufacturer serial
numbers.
This material is reasonably available because the interested
parties have access to it through their normal course of business or by
the means identified in ADDRESSES.
FAA's Determination
This product has been approved by the aviation authority of another
country and is approved for operation in the United States. Pursuant to
the FAA's bilateral agreement with the State of Design Authority, it
has notified the FAA of the unsafe condition described in the MCAI
described above. The FAA is issuing this NPRM after determining that
the unsafe condition described previously is likely to exist or develop
in other products of the same type design.
Proposed AD Requirements in This NPRM
This proposed AD would require accomplishing the actions specified
in EASA AD 2022-0186 described previously, except for any differences
identified as exceptions in the regulatory text of this proposed AD.
Explanation of Required Compliance Information
In the FAA's ongoing efforts to improve the efficiency of the AD
process, the FAA developed a process to use some civil aviation
authority (CAA) ADs as the primary source of information for compliance
with requirements for corresponding FAA ADs. The FAA has been
coordinating this process with manufacturers and CAAs. As a result, the
FAA proposes to incorporate EASA AD 2022-0186 by reference in the FAA
final rule. This proposed AD would, therefore, require compliance with
EASA AD 2022-0186 in its entirety through that incorporation, except
for any differences identified as exceptions in the regulatory text of
this proposed AD. Using common terms that are the same as the heading
of a particular section in EASA AD 2022-0186 does not mean that
operators need comply only with that section. For example, where the AD
requirement refers to ``all required actions and compliance times,''
compliance with this AD requirement is not limited to the section
titled ``Required Action(s) and Compliance Time(s)'' in EASA AD 2022-
0186. Service information required by EASA AD 2022-0186 for compliance
will be available at <a href="http://regulations.gov">regulations.gov</a> under Docket No. FAA-2022-1582
after the FAA final rule is published.
Costs of Compliance
The FAA estimates that this AD, if adopted as proposed, would
affect 30 airplanes of U.S. registry. The FAA estimates the following
costs to comply with this proposed AD:
Estimated Costs for Required Actions
----------------------------------------------------------------------------------------------------------------
Cost per Cost on U.S.
Labor cost Parts cost product operators
----------------------------------------------------------------------------------------------------------------
6 work-hours x $85 per hour = $510........................... $0 $510 $15,300
----------------------------------------------------------------------------------------------------------------
The FAA estimates the following costs to do any necessary on-
condition action that would be required based on the results of any
required actions. The FAA has no way of determining the number of
aircraft that might need this on-condition action:
Estimated Costs of On-Condition Actions
------------------------------------------------------------------------
Cost per
Labor cost Parts cost product
------------------------------------------------------------------------
2 work-hours x $85 per hour = $170.... $4 $174
------------------------------------------------------------------------
The FAA has included all known costs in its cost estimate.
According to the manufacturer, however, some or all of the costs of
this proposed AD may be covered under warranty, thereby reducing the
cost impact on affected operators.
Authority for This Rulemaking
Title 49 of the United States Code specifies the FAA's authority to
issue rules on aviation safety. Subtitle I, section 106, describes the
authority of the FAA Administrator. Subtitle VII: Aviation Programs,
describes in more detail the scope of the Agency's authority.
The FAA is issuing this rulemaking under the authority described in
Subtitle VII, Part A, Subpart III, Section 44701: General requirements.
Under that section, Congress charges the FAA with promoting safe flight
of civil aircraft in air commerce by prescribing regulations for
practices, methods, and procedures the Administrator finds necessary
for safety in air commerce. This regulation is within the scope of that
authority because it addresses an unsafe condition that is likely to
exist or develop on products identified in this rulemaking action.
Regulatory Findings
The FAA determined that this proposed AD would not have federalism
implications under Executive Order 13132. This proposed AD would not
have a substantial direct effect on the States, on the relationship
between the national Government and the States, or on the distribution
of power and
[[Page 76591]]
responsibilities among the various levels of government.
For the reasons discussed above, I certify this proposed
regulation:
(1) Is not a ``significant regulatory action'' under Executive
Order 12866,
(2) Would not affect intrastate aviation in Alaska, and
(3) Would not have a significant economic impact, positive or
negative, on a substantial number of small entities under the criteria
of the Regulatory Flexibility Act.
List of Subjects in 14 CFR Part 39
Air transportation, Aircraft, Aviation safety, Incorporation by
reference, Safety.
The Proposed Amendment
Accordingly, under the authority delegated to me by the
Administrator, the FAA proposes to amend 14 CFR part 39 as follows:
PART 39--AIRWORTHINESS DIRECTIVES
0
1. The authority citation for part 39 continues to read as follows:
Authority: 49 U.S.C. 106(g), 40113, 44701.
Sec. 39.13 [Amended]
0
2. The FAA amends Sec. 39.13 by adding the following new airworthiness
directive:
Airbus SAS Airplanes: Docket No. FAA-2022-1582; Project Identifier
MCAI-2022-01232-T.
(a) Comments Due Date
The FAA must receive comments on this airworthiness directive
(AD) by January 30, 2023.
(b) Affected ADs
None.
(c) Applicability
This AD applies to Airbus SAS Model A350-941 and -1041
airplanes, certificated in any category, having manufacturer serial
numbers identified in Airbus Service Bulletin A350-53-P074, dated
July 29, 2022.
(d) Subject
Air Transport Association (ATA) of America Code 53, Fuselage.
(e) Unsafe Condition
This AD was prompted by an in-service inspection that found
overhead storage compartment (OHSC) crash rods that were
disconnected. The FAA is issuing this AD to address this incorrect
installation, which could affect the structural integrity of the
OHSC under emergency landing loads. The unsafe condition, if not
addressed, could lead to OHSC detachment, resulting in injury to
occupants and blocking an escape path during an emergency
evacuation.
(f) Compliance
Comply with this AD within the compliance times specified,
unless already done.
(g) Requirements
Except as specified in paragraph (h) and (i) of this AD: Comply
with all required actions and compliance times specified in, and in
accordance with, European Union Aviation Safety Agency (EASA) AD
2022-0186, dated September 13, 2022 (EASA AD 2022-0186).
(h) Exceptions to EASA AD 2022-0186
(1) Where EASA AD 2022-0186 refers to its effective date, this
AD requires using the effective date of this AD.
(2) This AD does not adopt the ``Remarks'' section of EASA AD
2022-0186.
(i) No Reporting Requirement
Although the service information referenced in EASA AD 2022-0186
specifies to submit certain information to the manufacturer, this AD
does not include that requirement.
(j) Special Flight Permit
Special flight permits, as described in 14 CFR 21.197 and
21.199, are not allowed.
(k) Additional AD Provisions
The following provisions also apply to this AD:
(1) Alternative Methods of Compliance (AMOCs): The Manager,
International Validation Branch, FAA, has the authority to approve
AMOCs for this AD, if requested using the procedures found in 14 CFR
39.19. In accordance with 14 CFR 39.19, send your request to your
principal inspector or responsible Flight Standards Office, as
appropriate. If sending information directly to the International
Validation Branch, send it to the attention of the person identified
in paragraph (l) of this AD. Information may be emailed to: <a href="/cdn-cgi/l/email-protection#89b0a4c8dfdaa4c8c0dba4bebab9a4c8c4c6cac9efe8e8a7eee6ff"><span class="__cf_email__" data-cfemail="aa9387ebfcf987ebe3f8879d999a87ebe7e5e9eacccbcb84cdc5dc">[email protected]</span></a>. Before using any approved AMOC, notify your
appropriate principal inspector, or lacking a principal inspector,
the manager of the responsible Flight Standards Office.
(2) Contacting the Manufacturer: For any requirement in this AD
to obtain instructions from a manufacturer, the instructions must be
accomplished using a method approved by the Manager, International
Validation Branch, FAA; or EASA; or Airbus SAS's EASA Design
Organization Approval (DOA). If approved by the DOA, the approval
must include the DOA-authorized signature.
(3) Required for Compliance (RC): Except as required by
paragraphs (i) and (k)(2) of this AD, if any service information
contains procedures or tests that are identified as RC, those
procedures and tests must be done to comply with this AD; any
procedures or tests that are not identified as RC are recommended.
Those procedures and tests that are not identified as RC may be
deviated from using accepted methods in accordance with the
operator's maintenance or inspection program without obtaining
approval of an AMOC, provided the procedures and tests identified as
RC can be done and the airplane can be put back in an airworthy
condition. Any substitutions or changes to procedures or tests
identified as RC require approval of an AMOC.
(l) Additional Information
For more information about this AD, contact Dat Le, Aerospace
Engineer, Large Aircraft Section, FAA, International Validation
Branch, 2200 South 216th St., Des Moines, WA 98198; telephone 516-
228-7317; email <a href="/cdn-cgi/l/email-protection#82c6e3f6acd4accee7c2e4e3e3ace5edf4"><span class="__cf_email__" data-cfemail="a4e0c5d08af28ae8c1e4c2c5c58ac3cbd2">[email protected]</span></a>.
(m) Material Incorporated by Reference
(1) The Director of the Federal Register approved the
incorporation by reference (IBR) of the service information listed
in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.
(2) You must use this service information as applicable to do
the actions required by this AD, unless this AD specifies otherwise.
(i) Airbus Service Bulletin A350-53-P074, dated July 29, 2022.
(ii) European Union Aviation Safety Agency (EASA) AD 2022-0186,
dated September 13, 2022.
(3) For Airbus service information identified in this AD,
contact Airbus SAS, Airworthiness Office--EAL, Rond-Point Emile
Dewoitine No: 2, 31700 Blagnac Cedex, France; telephone +33 5 61 93
36 96; fax +33 5 61 93 45 80; email <a href="/cdn-cgi/l/email-protection#b4d7dbdac0dddac1d1d099d5ddc6c3dbc6c0dcdddad1c7c79ad5878184f488d594dcc6d1d289" http: airbus.com">airbus.com</a>">continued-airworthiness.a350@<a href="http://airbus.com">airbus.com</a></a>; website <a href="http://airbus.com">airbus.com</a>.
(4) For EASA AD 2022-0186, contact EASA, Konrad-Adenauer-Ufer 3,
50668 Cologne, Germany; telephone +49 221 8999 000; email
<a href="/cdn-cgi/l/email-protection#92d3d6e1d2f7f3e1f3bcf7e7e0fde2f3bcf7e7"><span class="__cf_email__" data-cfemail="1150556251747062703f7464637e61703f7464">[email protected]</span></a>; website easa.europa.eu. You may find this EASA
AD on the EASA website at ad.easa.europa.eu.
(5) You may view this service information at the FAA,
Airworthiness Products Section, Operational Safety Branch, 2200
South 216th St., Des Moines, WA. For information on the availability
of this material at the FAA, call 206-231-3195.
(6) You may view this service information that is incorporated
by reference at the National Archives and Records Administration
(NARA). For information on the availability of this material at
NARA, email <a href="/cdn-cgi/l/email-protection#0462762a6d6a77746167706d6b6a446a6576652a636b72"><span class="__cf_email__" data-cfemail="fa9c88d49394898a9f998e939594ba949b889bd49d958c">[email protected]</span></a>, or go to: <a href="http://www.archives.gov/federal-register/cfr/ibr-locations.html">www.archives.gov/federal-register/cfr/ibr-locations.html</a>.
Issued on December 7, 2022.
Christina Underwood,
Acting Director, Compliance & Airworthiness Division, Aircraft
Certification Service.
[FR Doc. 2022-26970 Filed 12-14-22; 8:45 am]
BILLING CODE 4910-13-P
</pre><script data-cfasync="false" src="/cdn-cgi/scripts/5c5dd728/cloudflare-static/email-decode.min.js"></script></body>
</html>Indexed from Federal Register on December 15, 2022.
This is legal information, not legal advice. Laws vary by jurisdiction and change frequently. Always verify current law with official sources and consult a licensed attorney in your jurisdiction for advice on your specific situation.