Notice2022-26023

Foreign-Trade Zone (FTZ) 219-Yuma, Arizona, Notification of Proposed Production Activity Barco Stamping Co. Inc. (Stamped Metal Products), Yuma, Arizona

Primary source

Metadata and text below are from the Federal Register, a public-domain U.S. government work. Always verify the official published version before relying on it for any legal matter.

Published
November 29, 2022

Issuing agencies

Commerce DepartmentForeign-Trade Zones Board

Full Text

<html>
<head>
<title>Federal Register, Volume 87 Issue 228 (Tuesday, November 29, 2022)</title>
</head>
<body><pre>
[Federal Register Volume 87, Number 228 (Tuesday, November 29, 2022)]
[Notices]
[Pages 73285-73286]
From the Federal Register Online via the Government Publishing Office [<a href="http://www.gpo.gov">www.gpo.gov</a>]
[FR Doc No: 2022-26023]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

Foreign-Trade Zones Board

[B-56-2022]


Foreign-Trade Zone (FTZ) 219--Yuma, Arizona, Notification of 
Proposed Production Activity Barco Stamping Co. Inc. (Stamped Metal 
Products), Yuma, Arizona

    The Greater Yuma Economic Development Corporation, grantee of FTZ 
219, submitted a notification of proposed production activity to the 
FTZ Board (the Board) on behalf of Barco Stamping Co. Inc., located in 
Yuma, Arizona. The notification conforming to the requirements of the 
Board's regulations (15 CFR 400.22) was received on November 22, 2022.
    Pursuant to 15 CFR 400.14(b), FTZ production activity would be 
limited to the specific foreign-status material(s)/component(s) and 
specific finished product(s) described in the submitted notification 
(summarized below) and subsequently authorized by the Board. The 
benefits that may stem from conducting production activity under FTZ 
procedures are explained in the background section of the Board's 
website--accessible via <a href="http://www.trade.gov/ftz">www.trade.gov/ftz</a>. The proposed finished 
product(s) and material(s)/component(s) would be added to the 
production authority that the Board previously approved for the 
operation, as reflected on the Board's website.
    The proposed finished products include: electrical switch enclosure 
doors; electrical enclosures; A/C disconnect enclosure doors; various 
bracketry (steering columns; engine mounts; seating); ballast chassis; 
and, various lighting products (can blanks; plaster frames; U-sections; 
hanger bars; socket plates; junction boxes; junction box covers; can 
tops; heat sinks; wall mounts) (duty rate ranges from duty-free to 6%).
    The proposed foreign-status materials and components include 
various coil (aluminum; galvanized; stainless steel; prepainted 
galvanized steel; prepainted aluminum) (duty rate ranges from duty-free 
to 3%). The request indicates that certain materials/components are

[[Page 73286]]

subject to duties under section 232 of the Trade Expansion Act of 1962 
(section 232) or section 301 of the Trade Act of 1974 (section 301), 
depending on the country of origin. The applicable section 232 and 
section 301 decisions require subject merchandise to be admitted to 
FTZs in privileged foreign status (19 CFR 146.41).
    Public comment is invited from interested parties. Submissions 
shall be addressed to the Board's Executive Secretary and sent to: 
<a href="/cdn-cgi/l/email-protection#81e7f5fbc1f5f3e0e5e4afe6eef7"><span class="__cf_email__" data-cfemail="4026343a0034322124256e272f36">[email&#160;protected]</span></a>. The closing period for their receipt is January 9, 2023.
    A copy of the notification will be available for public inspection 
in the ``Online FTZ Information System'' section of the Board's 
website.
    For further information, contact Juanita Chen at 
<a href="/cdn-cgi/l/email-protection#cfa5baaea1a6bbaee1aca7aaa18fbbbdaeabaae1a8a0b9"><span class="__cf_email__" data-cfemail="b5dfc0d4dbdcc1d49bd6ddd0dbf5c1c7d4d1d09bd2dac3">[email&#160;protected]</span></a>.

    Dated: November 23, 2022.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2022-26023 Filed 11-28-22; 8:45 am]
BILLING CODE 3510-DS-P


</pre><script data-cfasync="false" src="/cdn-cgi/scripts/5c5dd728/cloudflare-static/email-decode.min.js"></script></body>
</html>
Indexed from Federal Register on November 29, 2022.

This is legal information, not legal advice. Laws vary by jurisdiction and change frequently. Always verify current law with official sources and consult a licensed attorney in your jurisdiction for advice on your specific situation.