Federal & State Lawfederalstatelaw.com
Home/Federal/Federal Register/2022-15136
Rule2022-15136

Airworthiness Directives; Airbus SAS Airplanes

Primary source

Metadata and text below are from the Federal Register, a public-domain U.S. government work. Always verify the official published version before relying on it for any legal matter.

Published
July 15, 2022
Effective
August 19, 2022

Issuing agencies

Transportation DepartmentFederal Aviation Administration

Abstract

The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A300 B4-600, B4-600R, and F4-600R series airplanes, and Model A300 C4-605R Variant F airplanes (collectively called Model A300-600 series airplanes). This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.

Full Text

<html>
<head>
<title>Federal Register, Volume 87 Issue 135 (Friday, July 15, 2022)</title>
</head>
<body><pre>
[Federal Register Volume 87, Number 135 (Friday, July 15, 2022)]
[Rules and Regulations]
[Pages 42318-42320]
From the Federal Register Online via the Government Publishing Office [<a href="http://www.gpo.gov">www.gpo.gov</a>]
[FR Doc No: 2022-15136]


-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

[Docket No. FAA-2022-0505; Project Identifier MCAI-2021-01289-T; 
Amendment 39-22111; AD 2022-14-06]
RIN 2120-AA64


Airworthiness Directives; Airbus SAS Airplanes

AGENCY: Federal Aviation Administration (FAA), DOT.

ACTION: Final rule.

-----------------------------------------------------------------------

SUMMARY: The FAA is adopting a new airworthiness directive (AD) for all 
Airbus SAS Model A300 B4-600, B4-600R, and F4-600R series airplanes, 
and Model A300 C4-605R Variant F airplanes (collectively called Model 
A300-600 series airplanes). This AD was prompted by a determination 
that new or more restrictive airworthiness limitations are necessary. 
This AD requires revising the existing maintenance or inspection 
program, as applicable, to incorporate new or more restrictive 
airworthiness limitations, as specified in a European Union Aviation 
Safety Agency (EASA) AD, which is incorporated by reference. The FAA is 
issuing this AD to address the unsafe condition on these products.

DATES: This AD is effective August 19, 2022.
    The Director of the Federal Register approved the incorporation by 
reference of a certain publication listed in this AD as of August 19, 
2022.

ADDRESSES: For material incorporated by reference (IBR) in this AD, 
contact EASA, Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; telephone 
+49 221 8999 000; email <a href="/cdn-cgi/l/email-protection#7435300734111507155a1101061b04155a1101"><span class="__cf_email__" data-cfemail="88c9ccfbc8ede9fbe9a6edfdfae7f8e9a6edfd">[email&#160;protected]</span></a>; internet 
www.easa.europa.eu. You may find this IBR material on the EASA website 
at <a href="https://ad.easa.europa.eu">https://ad.easa.europa.eu</a>. You may view this material at the FAA, 
Airworthiness Products Section, Operational Safety Branch, 2200 South 
216th St., Des Moines, WA. For information on the availability of this 
material at the FAA, call 206-231-3195. It is also available in the AD 
docket at <a href="https://www.regulations.gov">https://www.regulations.gov</a> by searching for and locating 
Docket No. FAA-2022-0505.

Examining the AD Docket

    You may examine the AD docket at <a href="https://www.regulations.gov">https://www.regulations.gov</a> by 
searching for and locating Docket No. FAA-2022-0505; or in person at 
Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, 
except Federal holidays. The AD docket contains this final rule, the 
mandatory continuing airworthiness information (MCAI), any comments 
received, and other information. The address for Docket Operations is 
U.S. Department of Transportation, Docket Operations, M-30, West 
Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, 
Washington, DC 20590.

FOR FURTHER INFORMATION CONTACT: Dan Rodina, Aerospace Engineer, Large 
Aircraft Section, FAA, International Validation Branch, 2200 South 
216th St., Des Moines, WA 98198; phone: 206-231-3225; email: 
<a href="/cdn-cgi/l/email-protection#1074717e3e627f74797e71507671713e777f66"><span class="__cf_email__" data-cfemail="f7939699d98598939e9996b7919696d9909881">[email&#160;protected]</span></a>.

SUPPLEMENTARY INFORMATION:

Background

    EASA, which is the Technical Agent for the Member States of the 
European Union, has issued EASA AD 2021-0258, dated November 17, 2021 
(EASA AD 2021-0258) (also referred to as the MCAI), to correct an 
unsafe condition for all Airbus SAS Model A300-600 series airplanes.
    The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 
CFR part 39 by adding an AD that would apply to all Airbus SAS Model 
A300 B4-600, B4-600R, and F4-600R series airplanes, and Model A300 C4-
605R Variant F airplanes (collectively called Model A300-600 series 
airplanes). The NPRM published in the Federal Register on May 6, 2022 
(87 FR 27029). The NPRM was prompted by a determination that new or 
more restrictive airworthiness limitations are necessary. The NPRM 
proposed to require revising the existing maintenance or inspection 
program, as applicable, to incorporate new or more restrictive 
airworthiness limitations, as specified in EASA AD 2021-0258.
    The FAA is issuing this AD to prevent reduced structural integrity 
of the airplane. See the MCAI for additional background information.
    EASA previously issued EASA AD 2019-0090, dated April 26, 2019 
(EASA AD 2019-0090), requiring the actions described in the Airbus 
A300-600 Airworthiness Limitations Section (ALS), Part 2, ``Damage 
Tolerant Airworthiness Limitation Items (DT-ALI),'' Revision 03, dated 
December 14, 2018, which also includes the limit of validity (LOV) for 
the Model A300-600 airplanes. EASA AD 2019-0090 corresponds to FAA AD 
2019-21-01, Amendment 39-19767 (84 FR 56935, October 24, 2019) (AD 
2019-21-01). Since that EASA AD was issued, Airbus published the 
Variation, as defined in EASA AD 2021-0258, which reduces the LOV for 
Model A300-600 airplanes, reflecting the engineering data that supports 
the structural maintenance program and that corresponds to the period 
of time during which it is demonstrated that Widespread Fatigue Damage 
will not occur. EASA AD 2021-0258 does not supersede EASA AD 2019-0090, 
but does specify that it invalidates the LOV as specified in the Airbus 
A300-600 ALS, Part 2. Therefore, this AD would replace the LOVs 
specified in Airbus A300-600 Airworthiness Limitations Section (ALS), 
Part 2, ``Damage Tolerant Airworthiness Limitation Items (DT-ALI),'' 
Revision 03, dated December 14, 2018, as required by FAA AD 2019-21-01.
    For the reason described above, this AD requires compliance with 
the reduced LOV as specified in the variation.

Discussion of Final Airworthiness Directive

Comments

    The FAA received comments from the Air Line Pilots Association, 
International (ALPA) and FedEx who supported the NPRM without change.

Conclusion

    The FAA reviewed the relevant data, considered the comments 
received, and determined that air safety requires adopting this AD as 
proposed. Except for minor editorial changes, this AD is adopted as 
proposed in the NPRM. None of the changes will increase the

[[Page 42319]]

economic burden on any operator. Accordingly, the FAA is issuing this 
AD to address the unsafe condition on these products.

Related Service Information Under 1 CFR Part 51

    EASA AD 2021-0258 describes new or more restrictive airworthiness 
limitations for airplane LOVs. This material is reasonably available 
because the interested parties have access to it through their normal 
course of business or by the means identified in the ADDRESSES section.

Costs of Compliance

    The FAA estimates that this AD affects 110 airplanes of U.S. 
registry. The FAA estimates the following costs to comply with this AD:
    The FAA has determined that revising the existing maintenance or 
inspection program takes an average of 90 work-hours per operator, 
although the agency recognizes that this number may vary from operator 
to operator. Since operators incorporate maintenance or inspection 
program changes for their affected fleet(s), the FAA has determined 
that a per-operator estimate is more accurate than a per-airplane 
estimate. Therefore, the agency estimates the average total cost per 
operator to be $7,650 (90 work-hours x $85 per work-hour).

Authority for This Rulemaking

    Title 49 of the United States Code specifies the FAA's authority to 
issue rules on aviation safety. Subtitle I, section 106, describes the 
authority of the FAA Administrator. Subtitle VII: Aviation Programs, 
describes in more detail the scope of the Agency's authority.
    The FAA is issuing this rulemaking under the authority described in 
Subtitle VII, Part A, Subpart III, Section 44701: General requirements. 
Under that section, Congress charges the FAA with promoting safe flight 
of civil aircraft in air commerce by prescribing regulations for 
practices, methods, and procedures the Administrator finds necessary 
for safety in air commerce. This regulation is within the scope of that 
authority because it addresses an unsafe condition that is likely to 
exist or develop on products identified in this rulemaking action.

Regulatory Findings

    This AD will not have federalism implications under Executive Order 
13132. This AD will not have a substantial direct effect on the States, 
on the relationship between the national government and the States, or 
on the distribution of power and responsibilities among the various 
levels of government.
    For the reasons discussed above, I certify that this AD:
    (1) Is not a ``significant regulatory action'' under Executive 
Order 12866,
    (2) Will not affect intrastate aviation in Alaska, and
    (3) Will not have a significant economic impact, positive or 
negative, on a substantial number of small entities under the criteria 
of the Regulatory Flexibility Act.

List of Subjects in 14 CFR Part 39

    Air transportation, Aircraft, Aviation safety, Incorporation by 
reference, Safety.

The Amendment

    Accordingly, under the authority delegated to me by the 
Administrator, the FAA amends 14 CFR part 39 as follows:

PART 39--AIRWORTHINESS DIRECTIVES

0
1. The authority citation for part 39 continues to read as follows:

    Authority:  49 U.S.C. 106(g), 40113, 44701.


Sec.  39.13  [Amended]

0
2. The FAA amends Sec.  39.13 by adding the following new airworthiness 
directive:

2022-14-06 Airbus SAS: Amendment 39-22111; Docket No. FAA-2022-0505; 
Project Identifier MCAI-2021-01289-T.

(a) Effective Date

    This airworthiness directive (AD) is effective August 19, 2022.

(b) Affected ADs

    This AD affects AD 2019-21-01, Amendment 39-19767 (84 FR 56935, 
October 24, 2019) (AD 2019-21-01).

(c) Applicability

    This AD applies to all Airbus SAS Model A300 B4-601, B4-603, B4-
620, B4-622 B4-605R, B4-622R, C4-605R Variant F, F4-605R, and F4-
622R airplanes, certificated in any category.

(d) Subject

    Air Transport Association (ATA) of America Code 05, Time Limits/
Maintenance Checks.

(e) Unsafe Condition

    This AD was prompted by a determination that new or more 
restrictive airworthiness limitations are necessary. The FAA is 
issuing this AD to prevent reduced structural integrity of the 
airplane.

(f) Compliance

    Comply with this AD within the compliance times specified, 
unless already done.

(g) Requirements

    Except as specified in paragraph (h) of this AD: Comply with all 
required actions and compliance times specified in, and in 
accordance with, European Union Aviation Safety Agency (EASA) AD 
2021-0258, dated November 17, 2021 (EASA AD 2021-0258).

(h) Exceptions to EASA AD 2021-0258

    (1) Where EASA AD 2021-0258 refers to its effective date, this 
AD requires using the effective date of this AD.
    (2) Where paragraph (1) of EASA AD 2021-0258 specifies ``This AD 
invalidates the LOV [limit of validity] as specified in Airbus A300-
600 ALS Part 2 Revision 03 [EASA AD 2019-0090],'' this AD replaces 
the LOVs specified in paragraph 3.1 of Airbus A300-600 Airworthiness 
Limitations Section (ALS), Part 2, ``Damage Tolerant Airworthiness 
Limitation Items (DT-ALI),'' Revision 03, dated December 14, 2018, 
as required by FAA AD 2019-21-01.
    (3) Paragraph (2) of EASA AD 2021-0258 specifies revising ``the 
approved AMP'' within 12 months after its effective date, but this 
AD requires revising the existing maintenance or inspection program, 
as applicable, within 90 days after the effective date of this AD.
    (4) The ``Remarks'' section of EASA AD 2021-0258 does not apply 
to this AD.

(i) Provisions for Alternative Actions and Intervals

    After the existing maintenance or inspection program has been 
revised as required by paragraph (g) of this AD, no alternative 
actions (e.g., inspections) or intervals are allowed unless they are 
approved as specified in the provisions of the ``Ref. Publications'' 
section of EASA AD 2021-0258.

(j) Additional AD Provisions

    The following provisions also apply to this AD:
    (1) Alternative Methods of Compliance (AMOCs): The Manager, 
Large Aircraft Section, International Validation Branch, FAA, has 
the authority to approve AMOCs for this AD, if requested using the 
procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, 
send your request to your principal inspector or responsible Flight 
Standards Office, as appropriate. If sending information directly to 
the Large Aircraft Section, International Validation Branch, send it 
to the attention of the person identified in paragraph (k) of this 
AD. Information may be emailed to: <a href="/cdn-cgi/l/email-protection#a59c88e4f3f688e4ecf78892969588e4e8eae6e5c3c4c48bc2cad3"><span class="__cf_email__" data-cfemail="685145293e3b4529213a455f5b58452925272b280e0909460f071e">[email&#160;protected]</span></a>. 
Before using any approved AMOC, notify your appropriate principal 
inspector, or lacking a principal inspector, the manager of the 
local flight standards district office/certificate holding district 
office.
    (2) Contacting the Manufacturer: For any requirement in this AD 
to obtain instructions from a manufacturer, the instructions must be 
accomplished using a method approved by the Manager, Large Aircraft 
Section, International Validation Branch, FAA; or EASA; or Airbus 
SAS's EASA Design Organization Approval (DOA). If approved by the 
DOA, the approval must include the DOA-authorized signature.

[[Page 42320]]

(k) Related Information

    For more information about this AD, contact Dan Rodina, 
Aerospace Engineer, Large Aircraft Section, FAA, International 
Validation Branch, 2200 South 216th St., Des Moines, WA 98198; 
phone: 206-231-3225; email: <a href="/cdn-cgi/l/email-protection#94f0f5fabae6fbf0fdfaf5d4f2f5f5baf3fbe2"><span class="__cf_email__" data-cfemail="ceaaafa0e0bca1aaa7a0af8ea8afafe0a9a1b8">[email&#160;protected]</span></a>.

(l) Material Incorporated by Reference

    (1) The Director of the Federal Register approved the 
incorporation by reference of the service information listed in this 
paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.
    (2) You must use this service information as applicable to do 
the actions required by this AD, unless this AD specifies otherwise.
    (i) European Union Aviation Safety Agency (EASA) AD 2021-0258, 
dated November 17, 2021.
    (ii) [Reserved]
    (3) For EASA AD 2021-0258, contact EASA, Konrad-Adenauer-Ufer 3, 
50668 Cologne, Germany; telephone +49 221 8999 000; email 
<a href="/cdn-cgi/l/email-protection#3574714675505446541b5040475a45541b5040"><span class="__cf_email__" data-cfemail="e6a7a295a683879587c8839394899687c88393">[email&#160;protected]</span></a>; internet www.easa.europa.eu. You may find this 
EASA AD on the EASA website at <a href="https://ad.easa.europa.eu">https://ad.easa.europa.eu</a>.
    (4) You may view this material at the FAA, Airworthiness 
Products Section, Operational Safety Branch, 2200 South 216th St., 
Des Moines, WA. For information on the availability of this material 
at the FAA, call 206-231-3195.
    (5) You may view this material that is incorporated by reference 
at the National Archives and Records Administration (NARA). For 
information on the availability of this material at NARA, email 
<a href="/cdn-cgi/l/email-protection#d8beaaf6b1b6aba8bdbbacb1b7b698b6b9aab9f6bfb7ae"><span class="__cf_email__" data-cfemail="d5b3a7fbbcbba6a5b0b6a1bcbabb95bbb4a7b4fbb2baa3">[email&#160;protected]</span></a>, or go to: <a href="https://www.archives.gov/federal-register/cfr/ibr-locations.html">https://www.archives.gov/federal-register/cfr/ibr-locations.html</a>.

    Issued on June 27, 2022.
Gaetano A. Sciortino,
Deputy Director for Strategic Initiatives, Compliance & Airworthiness 
Division, Aircraft Certification Service.
[FR Doc. 2022-15136 Filed 7-14-22; 8:45 am]
BILLING CODE 4910-13-P


</pre><script data-cfasync="false" src="/cdn-cgi/scripts/5c5dd728/cloudflare-static/email-decode.min.js"></script></body>
</html>
View on FederalRegister.gov →Plain-text source
Indexed from Federal Register on July 15, 2022.

This is legal information, not legal advice. Laws vary by jurisdiction and change frequently. Always verify current law with official sources and consult a licensed attorney in your jurisdiction for advice on your specific situation.