Airworthiness Directives; Bell Textron Canada Limited Helicopters
Primary source
Metadata and text below are from the Federal Register, a public-domain U.S. government work. Always verify the official published version before relying on it for any legal matter.
Issuing agencies
Abstract
The FAA is adopting a new airworthiness directive (AD) for certain Bell Textron Canada Limited Model 206, 206A, 206A-1, 206B, 206B-1, 206L, 206L-1, 206L-3, and 206L-4 helicopters. This AD was prompted by reports of cracked or missing nuts on the tail rotor drive shaft (TRDS) disc pack (Thomas) couplings. This AD requires removing certain nuts from service, installing newly designed nuts, and applying a specific torque and a torque stripe to each newly installed nut. This AD then requires, after the installation of each newly designed nut, inspecting the torque and, depending on the inspection results, either applying a torque stripe or performing further inspections and removing certain parts from service. Finally, this AD prohibits installing any affected nut on any TRDS Thomas coupling. The FAA is issuing this AD to address the unsafe condition on these products.
This is legal information, not legal advice. Laws vary by jurisdiction and change frequently. Always verify current law with official sources and consult a licensed attorney in your jurisdiction for advice on your specific situation.