Integrated System Rate Schedules
Primary source
Metadata and text below are from the Federal Register, a public-domain U.S. government work. Always verify the official published version before relying on it for any legal matter.
Issuing agencies
Abstract
The Administrator, Southwestern Power Administration (Southwestern) has approved and placed into effect on an interim basis Rate Order No. SWPA-77, which extends the following existing Southwestern Integrated System rate schedules: Rate Schedule P-13A, Wholesale Rates for Hydro Peaking Power; Rate Schedule NFTS-13A, Wholesale Rates for Non-Federal Transmission/Interconnection Facilities Service; and Rate Schedule EE-13, Wholesale Rates for Excess Energy. This is an interim rate action effective October 1, 2021, extending for a period of two years through September 30, 2023.
Full Text
<html>
<head>
<title>Federal Register, Volume 86 Issue 175 (Tuesday, September 14, 2021)</title>
</head>
<body><pre>
[Federal Register Volume 86, Number 175 (Tuesday, September 14, 2021)]
[Notices]
[Pages 51141-51155]
From the Federal Register Online via the Government Publishing Office [<a href="http://www.gpo.gov">www.gpo.gov</a>]
[FR Doc No: 2021-19718]
-----------------------------------------------------------------------
DEPARTMENT OF ENERGY
Southwestern Power Administration
Integrated System Rate Schedules
AGENCY: Southwestern Power Administration, DOE.
ACTION: Notice of extension of integrated system rate schedules.
-----------------------------------------------------------------------
SUMMARY: The Administrator, Southwestern Power Administration
(Southwestern) has approved and placed into effect on an interim basis
Rate Order No. SWPA-77, which extends the following existing
Southwestern Integrated System rate schedules: Rate Schedule P-13A,
Wholesale Rates for Hydro Peaking Power; Rate Schedule NFTS-13A,
Wholesale Rates for Non-Federal Transmission/Interconnection Facilities
Service; and Rate Schedule EE-13, Wholesale Rates for Excess Energy.
This is an interim rate action effective October 1, 2021, extending for
a period of two years through September 30, 2023.
DATES: The effective period for the rate schedules specified in Rate
Order No. SWPA-77 is October 1, 2021, through September 30, 2023.
FOR FURTHER INFORMATION CONTACT: Ms. Fritha Ohlson, Senior Vice
President and Chief Operating Officer, Office of Corporate Operations,
Southwestern Power Administration, U.S. Department of Energy, One West
Third Street, Tulsa, Oklahoma 74103, (918) 595-6684 or email:
<a href="/cdn-cgi/l/email-protection#e482968d908c85ca8b8c88978b8aa497939485ca838b92"><span class="__cf_email__" data-cfemail="c7a1b5aeb3afa6e9a8afabb4a8a987b4b0b7a6e9a0a8b1">[email protected]</span></a>.
SUPPLEMENTARY INFORMATION: Rate Order No. SWPA-77 is approved and
placed into effect on an interim basis for the period October 1, 2021,
through September 30, 2023, for the following Southwestern Integrated
System rate schedules:
Rate Schedule P-13A, Wholesale Rates for Hydro Peaking Power
Rate Schedule NFTS-13A, Wholesale Rates for Non-Federal Transmission/
Interconnection Facilities Service
Rate Schedule EE-13, Wholesale Rates for Excess Energy
Decision Rationale
The Southwestern Administrator completed an annual review of the
continuing adequacy of the existing rate schedules for the Integrated
System. This review, as presented in the 2021 Integrated System Power
Repayment Studies (PRSs), indicated the need for a 1.3 percent revenue
increase to continue to satisfy cost recovery criteria. It is
Southwestern practice for the Administrator to defer, on a case-by-case
basis, revenue adjustments for the Integrated System if such
adjustments are within plus or minus two percent of the revenue
estimate based on the current Integrated System rate schedules. The
deferral of a revenue adjustment (rate change) provides for rate
stability and savings on the administrative costs of implementation.
The Administrator determined it to be prudent to defer the increase and
allow the current Integrated System rate schedules, which are set to
expire September 30, 2021, to remain in effect.
To ensure that Southwestern has rate schedules in effect for
collection of revenue in order to meet its repayment obligations, the
Administrator has approved and placed into effect a two-year extension
of the Integrated System rate schedules for the period October 1, 2021,
through September 30, 2023.
The Administrator followed part 903, subpart A of title 10 of the
Code of Federal Regulations (CFR), ``Procedures for Public
Participation in Power and Transmission Rate Adjustments and
Extensions'' for the extension of the rate schedules. The public was
informed by notice, published in the Federal Register (86 FR 31500
(June 14, 2021)) of the proposed extension of the rate schedules and of
the opportunity to provide written comments for a period of 30 days
ending July 14, 2021. No comments were received.
[[Page 51142]]
Legal Authority
By Delegation Order No. 00-037.00B, effective November 19, 2016,
the Secretary of Energy delegated: (1) The authority to develop power
and transmission rates to the Southwestern Administrator; (2) the
authority to confirm, approve, and place such rates into effect on an
interim basis to the Deputy Secretary of Energy; and (3) the authority
to confirm, approve, and place into effect on a final basis, or to
remand or disapprove such rates, to the Federal Energy Regulatory
Commission (FERC). By Delegation Order No. S1-DEL-S4-2021, effective
February 25, 2021, the Acting Secretary of Energy also delegated the
authority to confirm, approve, and place such rates into effect on an
interim basis to the Under Secretary for Science (and Energy). By
Redelegation Order No. S4-DEL-OE1-2021, effective March 25, 2021, the
Acting Under Secretary for Science (and Energy) redelegated the
authority to confirm, approve, and place such rates into effect on an
interim basis to the Assistant Secretary for Electricity. And by
Redelegation Order No. 00-002.10-04, effective July 8, 2020, the
Assistant Secretary for Electricity further redelegated the authority
to confirm, approve, and place such rates into effect on an interim
basis to the Southwestern Administrator. This redelegation order,
despite predating the February 2021 delegation and March 2021
redelegation, remains valid. By these delegations, and in accordance
with 10 CFR 903.22(h) and 10 CFR 903.23(a), as amended, (84 FR 5347,
5350 (Feb. 21, 2019)), the Administrator may approve and extend, on an
interim basis, rates previously confirmed and approved by FERC beyond
the period specified by FERC.
Environmental Impact
Southwestern previously determined that the rate change actions,
placed into effect on October 1, 2013 for the Integrated System fit
within the class of categorically excluded actions as listed in
appendix B to subpart D of 10 CFR part 1021, the Implementing
Procedures and Guidelines of the National Environmental Policy Act of
1969, as amended (42 U.S.C. 4321-4347), categorical exclusions
applicable to B4.3: Electric power marketing rate changes, which does
not require preparation of either an environmental impact statement
(EIS) or an environmental assessment (EA). On May 27, 2021,
Southwestern determined that categorical exclusion B4.3 applies to the
current action.
Determination Under Executive Order 12866
Southwestern has an exemption from centralized regulatory review
under Executive Order 12866; accordingly, no clearance of this notice
by the Office of Management and Budget is required.
UNITED STATES OF AMERICA
DEPARTMENT OF ENERGY
ADMINISTRATOR, SOUTHWESTERN POWER ADMINISTRATION
In the matter of: Southwestern Power Administration Integrated System
Rate Schedules
Rate Order No. SWPA-77
ORDER APPROVING EXTENSION OF RATE SCHEDULES ON AN INTERIM BASIS
(August 30, 2021)
Pursuant to Sections 301(b) and 302(a) and of the Department of
Energy Organization Act, Public Law 42 U.S.C. 7151(b) and 7152(a), the
functions of the Secretary of the Interior and the Federal Power
Commission under Section 5 of the Flood Control Act of 1944, 16 U.S.C.
825s, relating to the Southwestern Power Administration (Southwestern),
were transferred to, and vested in the Secretary of Energy. By
Delegation Order No. 00-037.00B, effective November 19, 2016, the
Secretary of Energy delegated: (1) The authority to develop power and
transmission rates to the Southwestern Administrator; (2) the authority
to confirm, approve, and place such rates into effect on an interim
basis to the Deputy Secretary of Energy; and (3) the authority to
confirm, approve, and place into effect on a final basis, or to remand
or disapprove such rates, to the Federal Energy Regulatory Commission
(FERC). By Delegation Order No. S1-DEL-S4-2021, effective February 25,
2021, the Acting Secretary of Energy also delegated the authority to
confirm, approve, and place such rates into effect on an interim basis
to the Under Secretary for Science (and Energy). By Redelegation Order
No. S4-DEL-OE1-2021, effective March 25, 2021, the Acting Under
Secretary for Science (and Energy) redelegated the authority to
confirm, approve, and place such rates into effect on an interim basis
to the Assistant Secretary for Electricity. And by Redelegation Order
No. 00-002.10-04, effective July 8, 2020, the Assistant Secretary for
Electricity further redelegated the authority to confirm, approve, and
place such rates into effect on an interim basis to the Southwestern
Administrator. This redelegation order, despite predating the February
2021 delegation and March 2021 redelegation, remains valid. By these
delegations, and in accordance with 10 CFR 903.22(h) and 10 CFR
903.23(a), as amended, (84 FR 5347, 5350 (Feb. 21, 2019)), the
Southwestern Administrator may approve and extend, on an interim basis,
rates previously confirmed and approved by FERC beyond the period
specified by FERC. Pursuant to that delegated authority, the
Southwestern Administrator has issued this interim rate order.
BACKGROUND
The following rate schedules for the Integrated System were
confirmed and approved on a final basis by FERC on January 9, 2014, in
Docket No. EF14-1-000 (146 FERC ] 62,016) for the period October 1,
2013, through September 30, 2017:
Rate Schedule P-13, Wholesale Rates for Hydro Peaking Power
Rate Schedule NFTS-13, Wholesale Rates for Non-Federal Transmission/
Interconnection Facilities Service
Rate Schedule EE-13, Wholesale Rates for Excess Energy
Since initial FERC approval, Southwestern added a new section
within rate schedule NFTS-13 with no revenue adjustment and the revised
rate schedule was designated NFTS-13A to reflect the change. The
following rate schedule was placed into effect on an interim basis by
the Deputy Secretary for Energy, effective January 1, 2017, and was
confirmed and approved on a final basis by FERC on March 9, 2017, in
Docket No. EF14-1-001 (158 FERC ] 62,182):
Rate Schedule NFTS-13A, Wholesale Rates for Non-Federal Transmission/
Interconnection Facilities Service
A two-year extension of all Integrated System rate schedules was
approved on an interim basis by the Deputy Secretary in Docket No.
EF14-1-002 for the period October 1, 2017, through September 30, 2019.
Subsequently, Southwestern added a new section within rate schedule P-
13 with no revenue adjustment and the revised rate schedule was
designated P-13A to reflect the change. The following rate schedule was
placed into effect on an interim basis by the Assistant Secretary for
Electricity, effective July 1, 2019, and was confirmed and approved on
a final basis by FERC on August 29, 2019, in Docket No. EF14-1-003 (168
FERC ] 62,125):
Rate Schedule P-13A, Wholesale Rates for Hydro Peaking Power
A two-year extension of all Integrated System rate schedules was
approved on an interim basis by the Assistant Secretary for Electricity
for the period of
[[Page 51143]]
October 1, 2019, through September 30, 2021.
DISCUSSION
The existing Integrated System rate schedules are based on the
Southwestern 2013 Power Repayment Studies (PRSs). PRSs have been
completed for the Integrated System each year since approval of the
existing rate schedules. Since 2013, subsequent PRSs have indicated the
need for a minimal rate increase, all within the plus or minus two
percent rate adjustment threshold practice established by the
Administrator on June 23, 1987. Therefore, the Administrator deferred
these rate adjustments in the best interest of the government.
However, the existing rate schedules are set to expire on September
30, 2021. Consequently, Southwestern proposed to extend the existing
rate schedules for a two-year period ending September 30, 2023, on an
interim basis under the implementation authorities noted in 10 CFR
903.22(h) and 10 CFR 903.23(a).
Southwestern followed 10 CFR part 903, ``Procedures for Public
Participation in Power and Transmission Rate Adjustments and
Extensions,'' for the proposed extension of the rate schedules. An
opportunity for customers and other interested members of the public to
review and comment on the proposed extension of the rate schedules was
announced by notice, published in the Federal Register on June 14, 2021
(86 FR 31500), with written comments due by July 14, 2021.
COMMENTS AND RESPONSES
Southwestern received no comments regarding the extension of the
rate schedules.
AVAILABILITY OF INFORMATION
Information regarding the extension of the rate schedules is
available for public review in the offices of Southwestern Power
Administration, Williams Tower I, One West Third Street, Tulsa,
Oklahoma 74103. The rate schedules are available on the Southwestern
website at <a href="http://www.swpa.gov">www.swpa.gov</a>.
ADMINISTRATION'S CERTIFICATION
The 2013 Integrated System PRSs indicated that the current rate
schedules will repay all costs of the Integrated System, including
amortization of the power investment consistent with the provisions of
Department of Energy Order No. RA 6120.2. The 2021 Integrated System
PRSs indicated the need for an annual revenue increase of 1.3 percent.
However, the 2021 rate adjustment falls within the Southwestern
established plus or minus two percent Integrated System rate adjustment
threshold practice and was deferred.
The Southwestern 2022 PRSs will determine the appropriate level of
revenues needed for the next rate period. In accordance with Delegation
Order No. 00-037.00B, effective November 19, 2016, and Section 5 of the
Flood Control Act of 1944, the Administrator has determined that the
existing rate schedules are the lowest possible rates consistent with
sound business principles, and their extension is consistent with
applicable law.
ENVIRONMENT
Southwestern previously determined that the rate change actions,
placed into effect on October 1, 2013 for the Integrated System, fit
within the class of categorically excluded actions as listed in
appendix B to subpart D of 10 CFR part 1021, the Implementing
Procedures and Guidelines of the National Environmental Policy Act of
1969, as amended (42 U.S.C. 4321-4347), categorical exclusions
applicable to B4.3: Electric power marketing rate changes, which does
not require preparation of either an environmental impact statement
(EIS) or an environmental assessment (EA). On May 27, 2021,
Southwestern determined that categorical exclusion B4.3 applies to the
current action.
ADMINISTRATIVE PROCEDURES
Under the Administrative Procedure Act (5 U.S.C. 553(d)),
publication or service of a substantive rule must be made not less than
30 days before its effective date, except (1) a substantive rule that
grants or recognizes an exemption or relieves a restriction; (2)
interpretative rules and statements of policy; or (3) as otherwise
provided by the agency for good cause found and published with the
rule. The Administrator finds good cause to waive the 30-day delay in
the effective date of this action as unnecessary for the following
reasons: (1) This is an extension of rates previously approved by FERC,
pursuant to 10 CFR 903.23(a); (2) there are no substantive changes, as
the existing rate schedules and anticipated revenues remain the same;
and (3) the Administrator provided notice and opportunity for public
comment more than 30 days prior to the effective date of the rate
extension and received no comments.
ORDER
In view of the foregoing, and pursuant to delegated authority from
the Secretary of Energy, I hereby extend on an interim basis, for the
period of two years, effective October 1, 2021, through September 30,
2023, the current Integrated System rate schedules:
Rate Schedule P-13A, Wholesale Rates for Hydro Peaking Power
Rate Schedule NFTS-13A, Wholesale Rates for Non-Federal Transmission/
Interconnection Facilities Service
Rate Schedule EE-13, Wholesale Rates for Excess Energy
Signing Authority
This document of the Department of Energy was signed on August 30,
2021, by Mike Wech, Administrator for Southwestern Power
Administration, pursuant to delegated authority from the Secretary of
Energy. That document, with the original signature and date, is
maintained by DOE. For administrative purposes only, and in compliance
with requirements of the Office of the Federal Register, the
undersigned DOE Federal Register Liaison Officer has been authorized to
sign and submit the document in electronic format for publication, as
an official document of DOE. This administrative process in no way
alters the legal effect of this document upon publication in the
Federal Register.
Signed in Washington, DC, on September 8, 2021.
Treena V. Garrett,
Federal Register Liaison Officer, U.S. Department of Energy.
UNITED STATES DEPARTMENT OF ENERGY
SOUTHWESTERN POWER ADMINISTRATION
RATE SCHEDULE P-13A \1\ **
---------------------------------------------------------------------------
\1\ Supersedes Rate Schedule P-13.
** Extended through September 30, 2023, by approval of Rate
Order No. SWPA-77 by the Administrator, Southwestern Power
Administration.
---------------------------------------------------------------------------
WHOLESALE RATES FOR HYDRO PEAKING POWER
Effective: During the period October 1, 2013, through September 30,
2023,** in accordance with the Federal Energy Regulatory Commission
(FERC) order issued in Docket No. EF14-1-000 (Jan. 9, 2014), extension
approved by the Deputy Secretary in Docket No. EF14-1-002 (Sept. 13,
2017), modification approved by FERC in Docket No. EF14-1-003 (Aug. 29,
2019), extension approved by Assistant Secretary for Electricity in
Rate Order No. 74 (Sept. 22, 2019), and extension approved by the
Administrator in Rate Order No. 77 (August 30, 2021).
[[Page 51144]]
Available: In the marketing area of Southwestern Power
Administration (Southwestern), described generally as the States of
Arkansas, Kansas, Louisiana, Missouri, Oklahoma, and Texas.
Applicable: To wholesale Customers which have contractual rights
from Southwestern to purchase Hydro Peaking Power and associated energy
(Peaking Energy and Supplemental Peaking Energy).
Character and Conditions of Service: Three-phase, alternating
current, delivered at approximately 60 Hertz, at the nominal
voltage(s), at the point(s) of delivery, and in such quantities as are
specified by contract.
1. Definitions of Terms
1.1. Ancillary Services
The services necessary to support the transmission of capacity and
energy from resources to loads while maintaining reliable operation of
the System of Southwestern in accordance with good utility practice,
which include the following:
1.1.1. Scheduling, System Control, and Dispatch Service
is provided by Southwestern as Balancing Authority Area operator and is
in regard to interchange and load-match scheduling and related system
control and dispatch functions.
1.1.2. Reactive Supply and Voltage Control From Generation Sources
Service
is provided at transmission facilities in the System of Southwestern to
produce or absorb reactive power and to maintain transmission voltages
within specific limits.
1.1.3. Regulation and Frequency Response Service
is the continuous balancing of generation and interchange resources
accomplished by raising or lowering the output of on-line generation as
necessary to follow the moment-by-moment changes in load and to
maintain frequency within a Balancing Authority Area.
1.1.4. Spinning Operating Reserve Service
maintains generating units on-line, but loaded at less than maximum
output, which may be used to service load immediately when disturbance
conditions are experienced due to a sudden loss of generation or load.
1.1.5. Supplemental Operating Reserve Service
provides an additional amount of operating reserve sufficient to reduce
Area Control Error to zero within 10 minutes following loss of
generating capacity which would result from the most severe single
contingency.
1.1.6. Energy Imbalance Service
corrects for differences over a period of time between schedules and
actual hourly deliveries of energy to a load. Energy delivered or
received within the authorized bandwidth for this service is accounted
for as an inadvertent flow and is returned to the providing party by
the receiving party in accordance with standard utility practice or a
contractual arrangement between the parties.
1.2. Customer
The entity which is utilizing and/or purchasing Federal Power and
Federal Energy and services from Southwestern pursuant to this Rate
Schedule.
1.3. Demand Period
The period of time used to determine maximum integrated rates of
delivery for the purpose of power accounting which is the 60-minute
period that begins with the change of hour.
1.4. Federal Power and Energy
The power and energy provided from the System of Southwestern.
1.5. Hydro Peaking Power
The Federal Power that Southwestern sells and makes available to
the Customers through their respective Power Sales Contracts in
accordance with this Rate Schedule.
1.6. Peaking Billing Demand
The quantity equal to the Peaking Contract Demand for any month
unless otherwise provided by the Customer's Power Sales Contract.
1.7. Peaking Contract Demand
The maximum rate in kilowatts at which Southwestern is obligated to
deliver Federal Energy associated with Hydro Peaking Power as set forth
in the Customer's Power Sales Contract.
1.8. Peaking Energy
The Federal Energy associated with Hydro Peaking Power that
Southwestern sells and makes available to the Customer in accordance
with the terms and conditions of the Customer's Power Sales Contract.
1.9. Peaking Energy Schedule Submission Time
The time by which Southwestern requires the Customer to submit
Peaking Energy schedules to Southwestern as provided for in this Rate
Schedule and in accordance with the terms and conditions of the
Customer's Power Sales Contract.
1.10. Power Sales Contract
The Customer's contract with Southwestern for the sale of Federal
Power and Federal Energy.
1.11. Supplemental Peaking Energy
The Federal Energy associated with Hydro Peaking Power that
Southwestern sells and makes available to the Customer if determined by
Southwestern to be available and that is in addition to the quantity of
Peaking Energy purchased by the Customer in accordance with the terms
and conditions of the Customer's Power Sales Contract.
1.12. System of Southwestern
The transmission and related facilities owned by Southwestern, and/
or the generation, transmission, and related facilities owned by
others, the capacity of which, by contract, is available to and
utilized by Southwestern to satisfy its contractual obligations to the
Customer.
1.13. Uncontrollable Force
Any force which is not within the control of the party affected,
including, but not limited to failure of water supply, failure of
facilities, flood, earthquake, storm, lightning, fire, epidemic, riot,
civil disturbance, labor disturbance, sabotage, war, act of war,
terrorist acts, or restraint by court of general jurisdiction, which by
exercise of due diligence and foresight such party could not reasonably
have been expected to avoid.
2. Wholesale Rates, Terms, and Conditions for Hydro Peaking Power,
Peaking Energy, Supplemental Peaking Energy, and Associated Services
Unless otherwise specified, this Section 2 is applicable to all
sales under the Customer's Power Sales Contract.
2.1. Hydro Peaking Power Rates, Terms, and Conditions
2.1.1. Monthly Capacity Charge for Hydro Peaking Power
$4.50 per kilowatt of Peaking Billing Demand.
[[Page 51145]]
2.1.2. Services Associated With Capacity Charge for Hydro Peaking Power
The capacity charge for Hydro Peaking Power includes such
transmission services as are necessary to integrate Southwestern's
resources in order to reliably deliver Hydro Peaking Power and
associated energy to the Customer. This capacity charge also includes
two Ancillary Services charges: Scheduling, System Control, and
Dispatch Service; and Reactive Supply and Voltage Control from
Generation Sources Service.
2.1.3. Secondary Transmission Service Under Capacity Associated With
Hydro Peaking Power
Customers may utilize the transmission capacity associated with
Peaking Contract Demand for the transmission of non-Federal energy, on
a non-firm, as-available basis, at no additional charge for such
transmission service or associated Ancillary Services, under the
following terms and conditions:
2.1.3.1. The sum of the capacity, for any hour, which is used for
Peaking Energy, Supplemental Peaking Energy, and Secondary Transmission
Service, may not exceed the Peaking Contract Demand;
2.1.3.2. The non-Federal energy transmitted under such secondary
service is delivered to the Customer's point of delivery for Hydro
Peaking Power;
2.1.3.3. The Customer commits to provide Real Power Losses
associated with such deliveries of non-Federal energy; and
2.1.3.4. Sufficient transfer capability exists between the point of
receipt into the System of Southwestern of such non-Federal energy and
the Customer's point of delivery for Hydro Peaking Power for the time
period that such secondary transmission service is requested.
2.1.4. Adjustment for Reduction in Service
If, during any month, the Peaking Contract Demand associated with a
Power Sales Contract in which Southwestern has the obligation to
provide 1,200 kilowatthours of Peaking Energy per kilowatt of Peaking
Contract Demand is reduced by Southwestern for a period or periods of
not less than two consecutive hours by reason of an outage caused by
either an Uncontrollable Force or by the installation, maintenance,
replacement or malfunction of generation, transmission and/or related
facilities on the System of Southwestern, or insufficient pool levels,
the Customer's capacity charges for such month will be reduced for each
such reduction in service by an amount computed under the formula:
R = (C x K x H) / S
with the factors defined as follows:
R = The dollar amount of reduction in the monthly total capacity
charges for a particular reduction of not less than two consecutive
hours during any month, except that the total amount of any such
reduction shall not exceed the product of the Customer's capacity
charges associated with Hydro Peaking Power times the Peaking
Billing Demand.
C = The Customer's capacity charges associated with Hydro Peaking
Power for the Peaking Billing Demand for such month.
K = The reduction in kilowatts in Peaking Billing Demand for a
particular event.
H = The number of hours duration of such particular reduction.
S = The number of hours that Peaking Energy is scheduled during such
month, but not less than 60 hours times the Peaking Contract Demand.
Such reduction in charges shall fulfill Southwestern's obligation
to deliver Hydro Peaking Power and Peaking Energy.
2.2. Peaking Energy and Supplemental Peaking Energy Rates, Terms, and
Conditions
2.2.1. Peaking Energy Charge
$0.0094 per kilowatthour of Peaking Energy delivered plus the
Purchased Power Adder as defined in Section 2.2.3 of this Rate
Schedule.
2.2.2. Supplemental Energy Charge
$0.0094 per kilowatthour of Supplemental Peaking Energy delivered.
2.2.3. Purchased Power Adder
A purchased power adder of $0.0059 per kilowatthour of Peaking
Energy delivered, as adjusted by the Administrator, Southwestern, in
accordance with the procedure within this Rate Schedule.
2.2.3.1. Applicability of Purchased Power Adder
The Purchased Power Adder shall apply to sales of Peaking Energy.
The Purchased Power Adder shall not apply to sales of Supplemental
Peaking Energy or sales to any Customer which, by contract, has assumed
the obligation to supply energy to fulfill the minimum of 1,200
kilowatthours of Peaking Energy per kilowatt of Peaking Contract Demand
during a contract year (hereinafter ``Contract Support Arrangements'').
2.2.3.2. Procedure for Determining Net Purchased Power Adder Adjustment
Not more than twice annually, the Purchased Power Adder of $0.0059
(5.9 mills) per kilowatthour of Peaking Energy, as noted in this Rate
Schedule, may be adjusted by the Administrator, Southwestern, by an
amount up to a total of [square]$0.0059 (5.9 mills) per kilowatthour
per year, as calculated by the following formula:
ADJ = (PURCH - EST + DIF) / SALES
with the factors defined as follows:
ADJ = The dollar per kilowatthour amount of the total adjustment,
plus or minus, to be applied to the net Purchased Power Adder,
rounded to the nearest $0.0001 per kilowatt[not]hour, provided that
the total ADJ to be applied in any year shall not vary from the
then-effective ADJ by more than $0.0059 per kilowatthour;
PURCH = The actual total dollar cost of Southwestern's System Direct
Purchases as accounted for in the financial records of the
Southwestern Federal Power System for the period;
EST = The estimated total dollar cost ($13,273,800 per year) of
Southwestern's System Direct Purchases used as the basis for the
Purchased Power Adder of $0.0059 per kilowatt[not]hour of Peaking
Energy;
DIF = The accumulated remainder of the difference in the actual and
estimated total dollar cost of Southwestern's System Direct
Purchases since the effective date of the currently approved
Purchased Power Adder set forth in this Rate Schedule, which
remainder is not projected for recovery through the ADJ in any
previous periods;
SALES = The annual Total Peaking Energy sales projected to be
delivered (2,241,300,000 KWh per year) from the System of
Southwestern, which total was used as the basis for the $0.0059 per
kilowatthour Purchased Power Adder.
2.3 Transformation Service Rates, Terms, and Conditions
2.3.1 Monthly Capacity Charge for Transformation Service
$0.46 per kilowatt will be assessed for capacity used to deliver
energy at any point of delivery at which Southwestern provides
transformation service for deliveries at voltages of 69 kilovolts or
less from higher voltage facilities.
2.3.2 Applicability of Capacity Charge for Transformation Service
Unless otherwise specified by contract, for any particular month, a
charge for transformation service will be assessed on the greater of
(1) that month's highest metered demand, or (2) the highest metered
demand recorded during the previous 11 months, at any point of
delivery. For the purpose of this Rate Schedule, the highest metered
demand will be based on all deliveries,
[[Page 51146]]
of both Federal and non-Federal energy, from the System of
Southwestern, at such point during such month.
2.4. Ancillary Services Rates, Terms, and Conditions
2.4.1. Capacity Charges for Ancillary Services
2.4.1.1. Regulation and Frequency Response Service
Monthly rate of $0.07 per kilowatt of Peaking Billing Demand plus
the Regulation Purchased Adder as defined in Section 2.4.5 of this Rate
Schedule.
2.4.1.2. Spinning Operating Reserve Service
Monthly rate of $0.0146 per kilowatt of Peaking Billing Demand.
Daily rate of $0.00066 per kilowatt for non-Federal generation
inside Southwestern's Balancing Authority Area.
2.4.1.3. Supplemental Operating Reserve Service
Monthly rate of $0.0146 per kilowatt of Peaking Billing Demand.
Daily rate of $0.00066 per kilowatt for non-Federal generation
inside Southwestern's Balancing Authority Area.
2.4.1.4. Energy Imbalance Service
$0.0 per kilowatt for all reservation periods.
2.4.2. Availability of Ancillary Services
Regulation and Frequency Response Service and Energy Imbalance
Service are available only for deliveries of power and energy to load
within Southwestern's Balancing Authority Area. Spinning Operating
Reserve Service and Supplemental Operating Reserve Service are
available only for deliveries of non-Federal power and energy generated
by resources located within Southwestern's Balancing Authority Area and
for deliveries of all Hydro Peaking Power and associated energy from
and within Southwestern's Balancing Authority Area. Where available,
such Ancillary Services must be taken from Southwestern; unless,
arrangements are made in accordance with Section 2.4.4 of this Rate
Schedule.
2.4.3. Applicability of Charges for Ancillary Services
For any month, the charges for Ancillary Services for deliveries of
Hydro Peaking Power shall be based on the Peaking Billing Demand.
The daily charge for Spinning Operating Reserve Service and
Supplemental Operating Reserve Service for non-Federal generation
inside Southwestern's Balancing Authority Area shall be applied to the
greater of Southwestern's previous day's estimate of the peak, or the
actual peak, in kilowatts, of the internal non-Federal generation.
2.4.4. Provision of Ancillary Services by Others
Customers for which Ancillary Services are made available as
specified above, must inform Southwestern by written notice of the
Ancillary Services which they do not intend to take and purchase from
Southwestern, and of their election to provide all or part of such
Ancillary Services from their own resources or from a third party.
Subject to Southwestern's approval of the ability of such resources
or third parties to meet Southwestern's technical and operational
requirements for provision of such Ancillary Services, the Customer may
change the Ancillary Services which it takes from Southwestern and/or
from other sources at the beginning of any month upon the greater of 60
days notice or upon completion of any necessary equipment modifications
necessary to accommodate such change; Provided, That, if the Customer
chooses not to take Regulation and Frequency Response Service, which
includes the associated Regulation Purchased Adder, the Customer must
pursue these services from a different host Balancing Authority;
thereby moving all metered loads and resources from Southwestern's
Balancing Authority Area to the Balancing Authority Area of the new
host Balancing Authority. Until such time as that meter reconfiguration
is accomplished, the Customer will be charged for the Regulation and
Frequency Response Service and applicable Adder then in effect. The
Customer must notify Southwestern by July 1 of this choice, to be
effective the subsequent calendar year.
2.4.5. Regulation Purchased Adder
Southwestern has determined the amount of energy used from storage
to provide Regulation and Frequency Response Service in order to meet
Southwestern's Balancing Authority Area requirements. The replacement
value of such energy used shall be recovered through the Regulation
Purchased Adder. The Regulation Purchased Adder during the time period
of January 1 through December 31 of the current calendar year is based
on the average annual use of energy from storage \1\ for Regulation and
Frequency Response Service and Southwestern's estimated purchased power
price for the corresponding year from the most currently approved Power
Repayment Studies.
---------------------------------------------------------------------------
\1\ The average annual use of energy from storage for Regulation
and Frequency Response Service is based on Southwestern studies.
---------------------------------------------------------------------------
The Regulation Purchased Adder will be phased in over a period of
four (4) years as follows:
------------------------------------------------------------------------
Regulation purchased adder for
the incremental replacement
Year value of energy used from
storage
------------------------------------------------------------------------
2014.................................... \1/4\ of the average annual
use of energy from storage x
2014 Purchased Power price.
2015.................................... \1/2\ of the average annual
use of energy from storage x
2015 Purchased Power price.
2016.................................... \3/4\ of the average annual
use of energy from storage x
2016 Purchased Power price.
2017 and thereafter..................... The total average annual use
of energy from storage x the
applicable Purchased Power
price.
------------------------------------------------------------------------
2.4.5.1. Applicability of Regulation Purchased Adder
The replacement value of the estimated annual use of energy from
storage for Regulation and Frequency Response Service shall be
recovered by Customers located within Southwestern's Balancing
Authority Area on a non-coincident peak ratio share basis, divided into
twelve equal monthly payments, in accordance with the formula in
Section 2.4.5.2.
If the Regulation Purchased Adder is determined and applied under
Southwestern's Rate Schedule NFTS-13A, then it shall not be applied
here.
2.4.5.2. Procedure for Determining Regulation Purchased Adder
Unless otherwise specified by contract, the Regulation Purchased
Adder for an individual Customer shall be based on the following
formula rate, calculated to include the replacement value of the
estimated annual use of
[[Page 51147]]
energy from storage by Southwestern for Regulation and Frequency
Response Service.
RPA = The Regulation Purchased Adder for an individual Customer per
month, which is as follows:
[(L <INF>Customer</INF> / L <INF>Total</INF>) x RP <INF>Total</INF>
] / 12
with the factors defined as follows:
L <INF>Customer</INF> = The sum in MW of the following three
factors:
(1) The Customer's highest metered load plus generation used to
serve the Customer's load that is accounted for through a reduction
in the Customer's metered load (referred to as `generation behind
the meter') during the previous calendar year, and
(2) The Customer's highest rate of Scheduled Exports \2\ during
the previous calendar year, and
(3) The Customer's highest rate of Scheduled Imports \2\ during
the previous calendar year.
---------------------------------------------------------------------------
\2\ Scheduled Exports and Scheduled Imports are transactions,
such as sales and purchases respectively, which are in addition to a
Customer's metered load that contribute to Southwestern's Balancing
Authority Area need for regulation.
---------------------------------------------------------------------------
L <INF>Total</INF> = The sum of all L Customer factors for all
Customers that were inside Southwestern's Balancing Authority Area
at the beginning of the previous calendar year in MW.
RP <INF>Total</INF> = The ``net'' cost in dollars and cents based on
Southwestern's estimated purchased power price for the corresponding
year from the most currently approved Power Repayment Studies
multiplied by the average annual use of energy from storage, as
provided for in the table in Section 2.4.5, to support
Southwestern's ability to regulate within its Balancing Authority
Area. The ``net'' cost in dollars and cents shall be adjusted by
subtracting the product of the quantity of such average annual use
of energy from storage in MWh and Southwestern's highest rate in
dollars per MWh for Supplemental Peaking Energy during the previous
calendar year.
For Customers that have aggregated their load, resources, and
scheduling into a single node by contract within Southwestern's
Balancing Authority Area, the individual Customer's respective
Regulation Purchased Adder shall be that Customer's ratio share of the
Regulation Purchased Adder established for the node. Such ratio share
shall be determined for the Customer on a non-coincident basis and
shall be calculated for the Customer from their highest metered load
plus generation behind the meter.
2.4.6. Energy Imbalance Service Limitations
Energy Imbalance Service primarily applies to deliveries of power
and energy which are required to satisfy a Customer's load. As Hydro
Peaking Power and associated energy are limited by contract, the Energy
Imbalance Service bandwidth specified for Non-Federal Transmission
Service does not apply to deliveries of Hydro Peaking Power, and
therefore Energy Imbalance Service is not charged on such deliveries.
Customers who consume a capacity of Hydro Peaking Power greater than
their Peaking Contract Demand may be subject to a Capacity Overrun
Penalty.
3. Hydro Peaking Power Penalties, Terms, and Conditions
3.1. Capacity Overrun Penalty
3.1.1. Penalty Charge for Capacity Overrun
For each hour during which Hydro Peaking Power was provided at a
rate greater than that to which the Customer is entitled, the Customer
will be charged a Capacity Overrun Penalty at the following rates:
------------------------------------------------------------------------
Rate per
Months associated with charge kilowatt
------------------------------------------------------------------------
March, April, May, October, November, December.......... $0.15
January, February, June, July, August, September........ 0.30
------------------------------------------------------------------------
3.1.2. Applicability of Capacity Overrun Penalty
Customers which have loads within Southwestern's Balancing
Authority Area are obligated by contract to provide resources, over and
above the Hydro Peaking Power and associated energy purchased from
Southwestern, sufficient to meet their loads. A Capacity Overrun
Penalty shall be applied only when the formulas provided in Customers'
respective Power Sales Contracts indicate an overrun on Hydro Peaking
Power, and investigation determines that all resources, both firm and
non-firm, which were available at the time of the apparent overrun were
insufficient to meet the Customer's load.
3.2. Energy Overrun Penalty
3.2.1. Penalty Charge for Energy Overrun
$0.1034 per kilowatthour for each kilowatthour of overrun.
3.2.2. Applicability of Energy Overrun Penalty
By contract, the Customer is subject to limitations on the maximum
amounts of Peaking Energy which may be scheduled under the Customer's
Power Sales Contract. When the Customer schedules an amount in excess
of such maximum amounts, such Customer is subject to the Energy Overrun
Penalty.
3.3. Power Factor Penalty
3.3.1. Requirements Related to Power Factor
Any Customer served from facilities owned by or available by
contract to Southwestern will be required to maintain a power factor of
not less than 95 percent and will be subject to the following
provisions.
3.3.2. Determination of Power Factor
The power factor will be determined for all Demand Periods and
shall be calculated under the formula:
[GRAPHIC] [TIFF OMITTED] TN14SE21.000
with the factors defined as follows:
PF = The power factor for any Demand Period of the month.
kWh = The total quantity of energy which is delivered during such
Demand Period to the point of delivery or interconnection in
accordance with Section 3.3.4.
rkVAh = The total quantity of reactive kilovolt-ampere-hours (kVARs)
delivered during such Demand Period to the point of delivery or
interconnection in accordance with Section 3.3.4.
3.3.3. Penalty Charge for Power Factor
The Customer shall be assessed a penalty for all Demand Periods of
a month where the power factor is less than 95 percent lagging. For any
Demand Period during a particular month such penalty shall be in
accordance with the following formula:
C = D x (0.95-LPF) x $0.10
with the factors defined as follows:
C = The charge in dollars to be assessed for any particular Demand
Period of such month that the determination of power
[[Page 51148]]
factor ``PF'' is calculated to be less than 95 percent lagging.
D = The Customer's demand in kilowatts at the point of delivery for
such Demand Period in which a low power factor was calculated.
LPF = The lagging power factor, if any, determined by the formula
``PF'' for such Demand Period.
If C is negative, then C = zero (0).
3.3.4. Applicability of Power Factor Penalty
The Power Factor Penalty is applicable to radial interconnections
with the System of Southwestern. The total Power Factor Penalty for any
month shall be the sum of all charges ``C'' for all Demand Periods of
such month. No penalty is assessed for leading power factor.
Southwestern, in its sole judgment and at its sole option, may
determine whether power factor calculations should be applied to (i) a
single physical point of delivery, (ii) a combination of physical
points of delivery where a Customer has a single, electrically
integrated load, (iii) or interconnections. The general criteria for
such decision shall be that, given the configuration of the Customer's
and Southwestern's systems, Southwestern will determine, in its sole
judgment and at its sole option, whether the power factor calculation
more accurately assesses the detrimental impact on Southwestern's
system when the above formula is calculated for a single physical point
of delivery, a combination of physical points of delivery, or for an
interconnection as specified by an Interconnection Agreement.
Southwestern, at its sole option, may reduce or waive Power Factor
Penalties when, in Southwestern's sole judgment, low power factor
conditions were not detrimental to the System of Southwestern due to
particular loading and voltage conditions at the time the power factor
dropped below 95 percent lagging.
4. Hydro Peaking Power Miscellaneous Rates, Terms, and Conditions
4.1. Real Power Losses
Customers are required to self-provide all Real Power Losses for
non-Federal energy transmitted by Southwestern on behalf of such
Customers under the provisions detailed below.
Real Power Losses are computed as four (4) percent of the total
amount of non-Federal energy transmitted by Southwestern. The
Customer's monthly Real Power Losses are computed each month on a
megawatthour basis as follows:
ML = 0.04 x NFE
with the factors defined as follows:
ML = The total monthly loss energy, rounded to the nearest
megawatthour, to be scheduled by a Customer for receipt by
Southwestern for Real Power Losses associated with non-Federal
energy transmitted on behalf of such Customer; and
NFE = The amount of non-Federal energy that was transmitted by
Southwestern on behalf of a Customer during a particular month.
The Customer must schedule or cause to be scheduled to
Southwestern, Real Power Losses for which it is responsible subject to
the following conditions:
4.1.1. The Customer shall schedule and deliver Real Power Losses
back to Southwestern during the second month after they were incurred
by Southwestern in the transmission of the Customer's non-Federal power
and energy over the System of Southwestern unless such Customer has
accounted for Real Power Losses as part of a metering arrangement with
Southwestern.
4.1.2. On or before the twentieth day of each month, Southwestern
shall determine the amount of non-Federal loss energy it provided on
behalf of the Customer during the previous month and provide a written
schedule to the Customer setting forth hour-by-hour the quantities of
non-Federal energy to be delivered to Southwestern as losses during the
next month.
4.1.3. Real Power Losses not delivered to Southwestern by the
Customer, according to the schedule provided, during the month in which
such losses are due shall be billed by Southwestern to the Customer to
adjust the end-of-month loss energy balance to zero (0) megawatthours
and the Customer shall be obliged to purchase such energy at the
following rates:
------------------------------------------------------------------------
Rate per
Months associated with charge kilowatthour
------------------------------------------------------------------------
March, April, May, October, November, December.......... $0.15
January, February, June, July, August, September........ 0.30
------------------------------------------------------------------------
4.1.4. Real Power Losses delivered to Southwestern by the Customer
in excess of the losses due during the month shall be purchased by
Southwestern from the Customer at a rate per megawatthour equal to
Southwestern's rate per megawatthour for Supplemental Peaking Energy,
as set forth in Southwestern's then-effective Rate Schedule for Hydro
Peaking Power to adjust such hourly end-of-month loss energy balance to
zero (0) megawatthours.
4.2. Peaking Energy Schedule Submission Time
Southwestern's Peaking Energy Schedule Submission Time is on or
before 2:30 p.m. Central Prevailing Time (CPT), as adjusted by the
Administrator, Southwestern, in accordance with Section 4.2.2 in this
Rate Schedule, of the day preceding the day for the delivery of Peaking
Energy. The Peaking Energy Schedule Submission Time supersedes the
Peaking Energy schedule submission time provided in the Customer's
Power Sales Contract, pursuant to Section 4.2.1 of this Rate Schedule.
4.2.1. Applicability of Peaking Energy Schedule Submission Time
The Peaking Energy Schedule Submission Time shall apply to the
scheduling of Peaking Energy. The Peaking Energy Schedule Submission
Time shall not apply to the scheduling of Supplemental Peaking Energy
or to Contract Support Arrangements.
4.2.2. Procedure for Adjusting the Peaking Energy Schedule Submission
Time
Not more than once annually, the Peaking Energy Schedule Submission
Time of 2:30 p.m. CPT, as noted in Section 4.2 of this Rate Schedule,
may be adjusted by the Administrator, Southwestern, to a time no
earlier than 2:00 p.m. CPT and no later than 3:00 p.m. CPT.
4.2.2.1. Determination of Need To Adjust the Peaking Energy Schedule
Submission Time
The Administrator, Southwestern, will make a determination on the
need to adjust the Peaking Energy Schedule Submission Time based on
Southwestern's studies involving financial analysis, regional energy
[[Page 51149]]
market conditions, and/or operational considerations.
4.2.2.2. Notification of Peaking Energy Schedule Submission Time
Adjustment
The Administrator, Southwestern, will notify customers of the
determination to adjust the Peaking Energy Schedule Submission Time in
writing no later than 30 calendar days prior to the effective date of
the Peaking Energy Schedule Submission Time adjustment.
UNITED STATES DEPARTMENT OF ENERGY
SOUTHWESTERN POWER ADMINISTRATION
RATE SCHEDULE NFTS-13A \1\ **
WHOLESALE RATES FOR NON-FEDERAL TRANSMISSION/INTERCONNECTION FACILITIES
SERVICE
Effective: During the period October 1, 2013, through September 30,
2023,** in accordance with the Federal Energy Regulatory Commission
(FERC) order issued in Docket No. EF14-1-000 (Jan. 9, 2014),
modification approved by FERC in Docket No. EF14-1-001 (Mar. 9, 2017),
extension approved by the Deputy Secretary in Docket No. EF14-1-002
(Sept. 13, 2017), extension approved by Assistant Secretary for
Electricity in Rate Order No. 74 (Sept. 22, 2019), and extension
approved by the Administrator in Rate Order No. 77 (August 30, 2021).
---------------------------------------------------------------------------
\1\ Supersedes Rate Schedule NFTS-13.
** Extended through September 30, 2023, by approval of Rate
Order No. SWPA-77 by the Administrator, Southwestern Power
Administration.
---------------------------------------------------------------------------
Available: In the region of the System of Southwestern.
Applicable: To Customers which have executed Service Agreements
with Southwestern for the transmission of non-Federal power and energy
over the System of Southwestern or for its use for interconnections.
Southwestern will provide services over those portions of the System of
Southwestern in which the Administrator, Southwestern, in his or her
sole judgment, has determined that uncommitted transmission and
transformation capacities in the System of Southwestern are and will be
available in excess of the capacities required to market Federal power
and energy pursuant to Section 5 of the Flood Control Act of 1944 (58
Stat. 887,890; 16 U.S.C. 825s).
Character and Conditions of Service: Three-phase, alternating
current, delivered at approximately 60 Hertz, at the nominal
voltage(s), at the point(s) specified by Service Agreement or
Transmission Service Transaction.
1. Definitions of Terms
1.1. Ancillary Services
The services necessary to support the transmission of capacity and
energy from resources to loads while maintaining reliable operation of
the System of Southwestern in accordance with good utility practice,
which include the following:
1.1.1. Scheduling, System Control, and Dispatch Service
is provided by Southwestern as Balancing Authority Area operator and is
in regard to interchange and load-match scheduling and related system
control and dispatch functions.
1.1.2. Reactive Supply and Voltage Control From Generation Sources
Service
is provided at transmission facilities in the System of Southwestern to
produce or absorb reactive power and to maintain transmission voltages
within specific limits.
1.1.3. Regulation and Frequency Response Service
is the continuous balancing of generation and interchange resources
accomplished by raising or lowering the output of on-line generation as
necessary to follow the moment-by-moment changes in load and to
maintain frequency within a Balancing Authority Area.
1.1.4. Spinning Operating Reserve Service
maintains generating units on-line, but loaded at less than maximum
output, which may be used to service load immediately when disturbance
conditions are experienced due to a sudden loss of generation or load.
1.1.5. Supplemental Operating Reserve Service
provides an additional amount of operating reserve sufficient to reduce
Area Control Error to zero within 10 minutes following loss of
generating capacity which would result from the most severe single
contingency.
1.1.6. Energy Imbalance Service
corrects for differences over a period of time between schedules and
actual hourly deliveries of energy to a load. Energy delivered or
received within the authorized bandwidth for this service is accounted
for as an inadvertent flow and is returned to the providing party by
the receiving party in accordance with standard utility practice or a
contractual arrangement between the parties.
1.2. Customer
The entity which is utilizing and/or purchasing Federal Power and
Federal Energy and services from Southwestern pursuant to this Rate
Schedule.
1.3. Demand Period
The period of time used to determine maximum integrated rates of
delivery for the purpose of power accounting which is the 60-minute
period that begins with the change of hour.
1.4. Firm Point-to-Point Transmission Service
Transmission service reserved on a firm basis between specific
points of receipt and delivery pursuant to either a Firm Transmission
Service Agreement or to a Transmission Service Transaction.
1.5. Interconnection Facilities Service
A service that provides for the use of the System of Southwestern
to deliver energy and/or provide system support at an interconnection.
1.6. Network Integration Transmission Service
Transmission service provided under Part III of Southwestern's Open
Access Transmission Service Tariff which provides the Customer with
firm transmission service for the delivery of capacity and energy from
the Customer's resources to the Customer's load.
1.7. Non-Firm Point-to-Point Transmission Service
Transmission service reserved on a non-firm basis between specific
points of receipt and delivery pursuant to a Transmission Service
Transaction.
1.8. Point of Delivery
Either a single physical point to which electric power and energy
are delivered from the System of Southwestern, or a specified set of
delivery points which together form a single, electrically integrated
load.
1.9. Secondary Transmission Service
Service that is associated with Firm Point-to-Point Transmission
Service and Network Integration Transmission Service. For Firm Point-
to-Point Transmission Service, it consists of transmission service
provided on an as-available, non-firm basis, scheduled within the
limits of a particular capacity reservation for transmission service,
and scheduled from points of receipt, or to points of delivery, other
than those
[[Page 51150]]
designated in a Long-Term Firm Transmission Service Agreement or a
Transmission Service Transaction for Firm Point-to-Point Transmission
Service. For Network Integration Transmission Service, Secondary
Transmission Service consists of transmission service provided on an
as-available, non-firm basis, from resources other than the network
resources designated in a Network Transmission Service Agreement, to
meet the Customer's network load. The charges for Secondary
Transmission Service, other than Ancillary Services, are included in
the applicable capacity charges for Firm Point-to-Point Transmission
Service and Network Integration Transmission Service.
1.10. Service Agreement
A contract executed between a Customer and Southwestern for the
transmission of non-Federal power and energy over the System of
Southwestern or for interconnections which include the following:
1.10.1. Firm Transmission Service Agreement
provides for reserved transmission capacity on a firm basis, for a
particular point-to-point delivery path.
1.10.2. Interconnection Agreement
provides for the use of the System of Southwestern and recognizes the
exchange of mutual benefits for such use or provides for application of
a charge for Interconnection Facilities Service.
1.10.3. Network Transmission Service Agreement
provides for the Customer to request firm transmission service for the
delivery of capacity and energy from the Customer's network resources
to the Customer's network load, for a period of one year or more.
1.10.4. Non-Firm Transmission Service Agreement
provides for the Customer to request transmission service on a non-firm
basis.
1.11. Service Request
The request made under a Transmission Service Agreement through the
Southwest Power Pool, Inc. (hereinafter ``SPP'') Open Access Same-Time
Information System (hereinafter ``OASIS'') for reservation of
transmission capacity over a particular point-to-point delivery path
for a particular period. The Customer must submit hourly schedules for
actual service in addition to the Service Request.
1.12. System of Southwestern
The transmission and related facilities owned by Southwestern, and/
or the generation, transmission, and related facilities owned by
others, the capacity of which, by contract, is available to and
utilized by Southwestern to satisfy its contractual obligations to the
Customer.
1.13. Transmission Service Transaction
A Service Request that has been approved by SPP.
1.14. Uncontrollable Force
Any force which is not within the control of the party affected,
including, but not limited to failure of water supply, failure of
facilities, flood, earthquake, storm, lightning, fire, epidemic, riot,
civil disturbance, labor disturbance, sabotage, war, act of war,
terrorist acts, or restraint by court of general jurisdiction, which by
exercise of due diligence and foresight such party could not reasonably
have been expected to avoid.
2. Wholesale Rates, Terms, and Conditions for Firm Point-to-Point
Transmission Service, Non-Firm Point-to-Point Transmission Service,
Network Integration Transmission Service, and Interconnection
Facilities Service
2.1. Firm Point-to-Point Transmission Service Rates, Terms, and
Conditions
2.1.1. Monthly Capacity Charge for Firm Point-to-Point Transmission
Service
$1.48 per kilowatt of transmission capacity reserved in increments
of one month of service or invoiced in accordance with a longer term
agreement.
2.1.2. Weekly Capacity Charge for Firm Point-to-Point Transmission
Service
$0.370 per kilowatt of transmission capacity reserved in increments
of one week of service.
2.1.3. Daily Capacity Charge for Firm Point-to-Point Transmission
Service
$0.0673 per kilowatt of transmission capacity reserved in
increments of one day of service.
2.1.4. Services Associated With Capacity Charge for Firm Point-to-Point
Transmission Service
The capacity charge for Firm Point-to-Point Transmission Service
includes Secondary Transmission Service, but does not include charges
for Ancillary Services associated with actual schedules.
2.1.5. Applicability of Capacity Charge for Firm Point-to-Point
Transmission Service
Capacity charges for Firm Point-to-Point Transmission Service are
applied to quantities reserved by contract under a Firm Transmission
Service Agreement or in accordance with a Transmission Service
Transaction.
A Customer, unless otherwise specified by contract, will be
assessed capacity charges on the greatest of (1) the highest metered
demand at any particular Point of Delivery during a particular month,
rounded up to the nearest whole megawatt, or (2) the highest metered
demand recorded at such Point of Delivery during any of the previous 11
months, rounded up to the nearest whole megawatt, or (3) the capacity
reserved by contract; which amount shall be considered such Customer's
reserved capacity. Secondary Transmission Service for such Customer
shall be limited during any month to the most recent metered demand on
which that Customer is billed or to the capacity reserved by contract,
whichever is greater.
2.2. Non-Firm Point-to-Point Transmission Service Rates, Terms, and
Conditions
2.2.1. Monthly Capacity Charge for Non-Firm Point-to-Point Transmission
Service
80 percent of the monthly capacity charge for Firm Point-to-Point
Transmission Service reserved in increments of one month.
2.2.2. Weekly Capacity Charge for Non-Firm Point-to-Point Transmission
Service
80 percent of the monthly capacity charge divided by 4 for Firm
Point-to-Point Transmission Service reserved in increments of one week.
2.2.3. Daily Capacity Charge for Non-Firm Point-to-Point Transmission
Service
80 percent of the monthly capacity charge divided by 22 for Firm
Point-to-Point Transmission Service reserved in increments of one day.
2.2.4. Hourly Capacity Charge for Non-Firm Point-to-Point Transmission
Service
80 percent of the monthly capacity charge divided by 352 for Firm
Point-to-Point Transmission Service reserved in increments of one hour.
[[Page 51151]]
2.2.5. Applicability of Charges for Non-Firm Point-to-Point
Transmission Service
Capacity charges for Non-Firm Point-to-Point Transmission Service
are applied to quantities reserved under a Transmission Service
Transaction, and do not include charges for Ancillary Services.
2.3. Network Integration Transmission Service Rates, Terms, and
Conditions
2.3.1. Annual Revenue Requirement for Network Integration Transmission
Service
$15,533,800.
2.3.2. Monthly Revenue Requirement for Network Integration Transmission
Service
$1,294,483.
2.3.3. Net Capacity Available for Network Integration Transmission
Service
872,000 kilowatts.
2.3.4. Monthly Capacity Charge for Network Integration Transmission
Service
$1.48 per kilowatt of Network Load (charge derived from $1,294,483
/ 872,000 kilowatts).
2.3.5. Applicability of Charges for Network Integration Transmission
Service
Network Integration Transmission Service is available only for
deliveries of non-Federal power and energy, and is applied to the
Customer utilizing such service exclusive of any deliveries of Federal
power and energy. The capacity on which charges for any particular
Customer utilizing this service is determined on the greatest of (1)
the highest metered demand at any particular point of delivery during a
particular month, rounded up to the nearest whole megawatt, or (2) the
highest metered demand recorded at such point of delivery during any of
the previous 11 months, rounded up to the nearest whole megawatt.
For a Customer taking Network Integration Transmission Service who
is also taking delivery of Federal Power and Energy, the highest
metered demand shall be determined by subtracting the energy scheduled
for delivery of Federal Power and Energy for any hour from the metered
demand for such hour.
Secondary transmission Service for a Customer shall be limited
during any month to the most recent highest metered demand on which
such Customer is billed. Charges for Ancillary Services shall also be
assessed.
2.3.6. Procedure for Determining SPP Open Access Transmission Tariff
Network Integration Transmission Service Annual Revenue Requirement
The SPP Open Access Transmission Tariff Network Integration
Transmission Service Annual Revenue Requirement shall be based on the
following formula which shall be calculated when a Customer transitions
from a Service Agreement to an agreement for Network Integration
Transmission Service under the SPP Open Access Transmission Tariff.
SPP NITS ARR = Southwestern's SPP Network Integration Transmission
Service Annual Revenue Requirement, which is as follows:
(SPP NITS Capacity/Southwestern NITS Capacity) x Southwestern NITS ARR
with the factors defined as follows:
SPP NITS Capacity = The capacity on the System of Southwestern
utilized for SPP Network Integration Transmission Service which
shall be based on the currently approved Power Repayment Studies.
Southwestern NITS Capacity = Net Capacity Available for Network
Integration Transmission Service on the System of Southwestern as
specified in Section 2.3.3.
Southwestern NITS ARR = Southwestern's Annual Revenue Requirement
for Network Integration Transmission Service as specified in Section
2.3.1.
2.4. Interconnection Facilities Service Rates, Terms, and Conditions
2.4.1. Monthly Capacity Charge for Interconnection Facilities Service
$1.48 per kilowatt.
2.4.2. Applicability of Capacity Charge for Interconnection Facilities
Service
Any Customer that requests an interconnection from Southwestern
which, in Southwestern's sole judgment and at its sole option, does not
provide commensurate benefits or compensation to Southwestern for the
use of its facilities shall be assessed a capacity charge for
Interconnection Facilities Service. For any month, charges for
Interconnection Facilities Service shall be assessed on the greater of
(1) that month's actual highest metered demand, or (2) the highest
metered demand recorded during the previous eleven months, as metered
at the interconnection. The use of Interconnection Facilities Service
will be subject to power factor provisions as specified in this Rate
Schedule. The interconnection customer shall also schedule and deliver
Real Power Losses pursuant to the provisions of this Rate Schedule
based on metered flow through the interconnection where Interconnection
Facilities Services is assessed.
2.5. Transformation Service Rates, Terms, and Conditions
2.5.1. Monthly Capacity Charge for Transformation Service
$0.46 per kilowatt will be assessed for capacity used to deliver
energy at any point of delivery at which Southwestern provides
transformation service for deliveries at voltages of 69 kilovolts or
less from higher voltage facilities.
2.5.2. Applicability of Capacity Charge for Transformation Service
Unless otherwise specified by contract, for any particular month, a
charge for transformation service will be assessed on the greater of
(1) that month's highest metered demand, or (2) the highest metered
demand recorded during the previous 11 months, at any point of
delivery. For the purpose of this Rate Schedule, the highest metered
demand will be based on all deliveries, of both Federal and non-Federal
energy, from the System of Southwestern, at such point during such
month.
2.6. Ancillary Services Rates, Terms, and Conditions
2.6.1. Capacity Charges for Ancillary Services
2.6.1.1. Scheduling, System Control, and Dispatch Service
Monthly rate of $0.09 per kilowatt of transmission capacity
reserved in increments of one month of service or invoiced in
accordance with a Long-Term Firm Transmission Service Agreement or
Network Transmission Service Agreement.
Weekly rate of $0.023 per kilowatt of transmission capacity
reserved in increments of one week of service.
Daily rate of $0.0041 per kilowatt of transmission capacity
reserved in increments of one day of service.
Hourly rate of $0.00026 per kilowatt of transmission energy
delivered as non-firm transmission service.
2.6.1.2. Reactive Supply and Voltage Control From Generation Sources
Service
Monthly rate of $0.04 per kilowatt of transmission capacity
reserved in increments of one month of service or invoiced in
accordance with a Long-Term Firm Transmission Service Agreement or
Network Transmission Service Agreement.
[[Page 51152]]
Weekly rate of $0.010 per kilowatt of transmission capacity
reserved in increments of one week of service.
Daily rate of $0.0018 per kilowatt of transmission capacity
reserved in increments of one day of service.
Hourly rate of $0.00011 per kilowatt of transmission energy
delivered as non-firm transmission service.
2.6.1.3. Regulation and Frequency Response Service
Monthly rate of $0.07 per kilowatt of transmission capacity
reserved in increments of one month of service or invoiced in
accordance with a Long-Term Firm Transmission Service Agreement or
Network Transmission Service Agreement plus the Regulation Purchased
Adder as defined in Section 2.6.5 of this Rate Schedule.
Weekly rate of $0.018 per kilowatt of transmission capacity
reserved in increments of one week of service plus the Regulation
Purchased Adder as defined in Section 2.6.5 of this Rate Schedule.
Daily rate of $0.0032 per kilowatt of transmission capacity
reserved in increments of one day of service plus the Regulation
Purchased Adder as defined in Section 2.6.5 of this Rate Schedule.
Hourly rate of $0.00020 per kilowatt of transmission energy
delivered as non-firm transmission service plus the Regulation
Purchased Adder as defined in Section 2.6.5 of this Rate Schedule.
2.6.1.4. Spinning Operating Reserve Service
Monthly rate of $0.0146 per kilowatt of transmission capacity
reserved in increments of one month of service or invoiced in
accordance with a Long-Term Firm Transmission Service Agreement or
Network Transmission Service Agreement.
Weekly rate of $0.00365 per kilowatt of transmission capacity
reserved in increments of one week of service.
Daily rate of $0.00066 per kilowatt of transmission capacity
reserved in increments of one day of service.
Hourly rate of $0.00004 per kilowatt of transmission energy
delivered as non-firm transmission service.
2.6.1.5. Supplemental Operating Reserve Service
Monthly rate of $0.0146 per kilowatt of transmission capacity
reserved in increments of one month of service or invoiced in
accordance with a Long-Term Firm Transmission Service Agreement or
Network Transmission Service Agreement.
Weekly rate of $0.00365 per kilowatt of transmission capacity
reserved in increments of one week of service.
Daily rate of $0.00066 per kilowatt of transmission capacity
reserved in increments of one day of service.
Hourly rate of $0.00004 per kilowatt of transmission energy
delivered as non-firm transmission service.
2.6.1.6. Energy Imbalance Service
$0.0 per kilowatt for all reservation periods.
2.6.2. Availability of Ancillary Services
Scheduling, System Control, and Dispatch Service and Reactive
Supply and Voltage Control from Generation Sources Service are
available for all transmission services in and from the System of
Southwestern and shall be provided by Southwestern. Regulation and
Frequency Response Service and Energy Imbalance Service are available
only for deliveries of power and energy to load within Southwestern's
Balancing Authority Area, and shall be provided by Southwestern,
unless, subject to Southwestern's approval, they are provided by
others. Spinning Operating Reserve Service and Supplemental Operating
Reserve Service are available only for deliveries of power and energy
generated by resources located within Southwestern's Balancing
Authority Area and shall be provided by Southwestern, unless, subject
to Southwestern's approval, they are provided by others.
2.6.3. Applicability of Charges for Ancillary Services
Charges for all Ancillary Services are applied to the transmission
capacity reserved or network transmission service taken by the Customer
in accordance with the rates listed above when such services are
provided by Southwestern.
The charges for Ancillary Services are considered to include
Ancillary Services for any Secondary Transmission Service, except in
cases where Ancillary Services identified in Sections 2.6.1.3 through
2.6.1.6 of this Rate Schedule are applicable to a Transmission Service
Transaction of Secondary Transmission Service, but are not applicable
to the transmission capacity reserved under which Secondary
Transmission Service is provided. When charges for Ancillary Services
are applicable to Secondary Transmission Service, the charge for the
Ancillary Service shall be the hourly rate applied to all energy
transmitted utilizing the Secondary Transmission Service.
2.6.4. Provision of Ancillary Services by Others
Customers for which Ancillary Services identified in Sections
2.6.1.3 through 2.6.1.6 of this Rate Schedule are made available as
specified above must inform Southwestern by written notice of the
Ancillary Services which they do not intend to take and purchase from
Southwestern, and of their election to provide all or part of such
Ancillary Services from their own resources or from a third party. Such
notice requirements also apply to requests for Southwestern to provide
Ancillary Services when such services are available as specified above.
Subject to Southwestern's approval of the ability of such resources
or third parties to meet Southwestern's technical and operational
requirements for provision of such Ancillary Services, the Customer may
change the Ancillary Services which it takes from Southwestern and/or
from other sources at the beginning of any month upon the greater of 60
days written notice or upon the completion of any necessary equipment
modifications necessary to accommodate such change; Provided, That, if
the Customer chooses not to take Regulation and Frequency Response
Service, which includes the associated Regulation Purchased Adder, the
Customer must pursue these services from a different host Balancing
Authority; thereby moving all metered loads and resources from
Southwestern's Balancing Authority Area to the Balancing Authority Area
of the new host Balancing Authority. Until such time as that meter
reconfiguration is accomplished, the Customer will be charged for the
Regulation and Frequency Response Service and applicable Adder then in
effect. The Customer must notify Southwestern by July 1 of this choice,
to be effective the subsequent calendar year.
2.6.5. Regulation Purchased Adder
Southwestern has determined the amount of energy used from storage
to provide Regulation and Frequency Response Service in order to meet
Southwestern's Balancing Authority Area requirements. The replacement
value of such energy used shall be recovered through the Regulation
Purchased Adder. The Regulation Purchased Adder during the time period
of January 1 through December 31 of the current calendar year is based
on the average annual use of energy from storage \1\ for Regulation and
Frequency
[[Page 51153]]
Response Service and Southwestern's estimated purchased power price for
the corresponding year from the most currently approved Power Repayment
Studies.
---------------------------------------------------------------------------
\1\ The average annual use of energy from storage for Regulation
and Frequency Response Service is based on Southwestern studies.
---------------------------------------------------------------------------
The Regulation Purchased Adder will be phased in over a period of
four (4) years as follows:
------------------------------------------------------------------------
Regulation Purchased Adder for
the incremental replacement
Year value of energy used from
storage
------------------------------------------------------------------------
2014.................................... \1/4\ of the average annual
use of energy from storage x
2014 Purchased Power price.
2015.................................... \1/2\ of the average annual
use of energy from storage x
2015 Purchased Power price.
2016.................................... \3/4\ of the average annual
use of energy from storage x
2016 Purchased Power price.
2017 and thereafter..................... The total average annual use
of energy from storage x the
applicable Purchased Power
price.
------------------------------------------------------------------------
2.6.5.1. Applicability of Regulation Purchased Adder
The replacement value of the estimated annual use of energy from
storage for Regulation and Frequency Response Service shall be
recovered by Customers located within Southwestern's Balancing
Authority Area on a non-coincident peak ratio share basis, divided into
twelve equal monthly payments, in accordance with the formula in
Section 2.6.5.2.
If the Regulation Purchased Adder is determined and applied under
Southwestern's Rate Schedule P-13, then it shall not be applied here.
2.6.5.2. Procedure for Determining Regulation Purchased Adder
Unless otherwise specified by contract, the Regulation Purchased
Adder for an individual Customer shall be based on the following
formula rate, calculated to include the replacement value of the
estimated annual use of energy from storage by Southwestern for
Regulation and Frequency Response Service.
RPA = The Regulation Purchased Adder for an individual Customer per
month, which is as follows:
[(L <INF>Customer</INF> / L Total) x RP <INF>Total</INF> ] / 12
with the factors defined as follows:
L <INF>Customer</INF> = The sum in MW of the following three
factors:
(1) The Customer's highest metered load plus generation used to
serve the Customer's load that is accounted for through a reduction
in the Customer's metered load (referred to as `generation behind
the meter') during the previous calendar year, and
(2) The Customer's highest rate of Scheduled Exports \2\ during
the previous calendar year, and
(3) The Customer's highest rate of Scheduled Imports \2\ during
the previous calendar year.
---------------------------------------------------------------------------
\2\ Scheduled Exports and Scheduled Imports are transactions,
such as sales and purchases respectively, which are in addition to a
Customer's metered load that contribute to Southwestern's Balancing
Authority Area need for regulation.
---------------------------------------------------------------------------
L<INF>Total</INF> = The sum of all L Customer factors for all
Customers that were inside Southwestern's Balancing Authority Area
at the beginning of the previous calendar year in MW.
RP <INF>Total</INF> = The ``net'' cost in dollars and cents based on
Southwestern's estimated purchased power price for the corresponding
year from the most currently approved Power Repayment Studies
multiplied by the average annual use of energy from storage, as
provided for in the table in Section 2.6.5, to support
Southwestern's ability to regulate within its Balancing Authority
Area. The ``net'' cost in dollars and cents shall be adjusted by
subtracting the product of the quantity of such average annual use
of energy from storage in MWh and Southwestern's highest rate in
dollars per MWh for Supplemental Peaking Energy during the previous
calendar year.
For Customers that have aggregated their load, resources, and
scheduling into a single node by contract within Southwestern's
Balancing Authority Area, the individual Customer's respective
Regulation Purchased Adder shall be that Customer's ratio share of the
Regulation Purchased Adder established for the node. Such ratio share
shall be determined for the Customer on a non-coincident basis and
shall be calculated for the Customer from their highest metered load
plus generation behind the meter.
2.6.6. Energy Imbalance Service Limitations
Energy Imbalance Service is authorized for use only within a
bandwidth of [ballot]1.5 percent of the actual requirements of the load
at a particular point of delivery, for any hour, compared to the
resources scheduled to meet such load during such hour. Deviations
which are greater than [ballot]1.5 percent, but which are less than
[ballot]2,000 kilowatts, are considered to be within the authorized
bandwidth. Deviations outside the authorized bandwidth are subject to a
Capacity Overrun Penalty.
Energy delivered or received within the authorized bandwidth for
this service is accounted for as an inadvertent flow and will be netted
against flows in the future. The inadvertent flow in any given hour
will only be offset with the flows in the corresponding hour of a day
in the same category. Unless otherwise specified by contract, the two
categories of days are weekdays and weekend days/North American
Electric Reliability Corporation holidays, and this process will result
in a separate inadvertent accumulation for each hour of the two
categories of days. The hourly accumulations in the current month will
be added to the hourly inadvertent balances from the previous month,
resulting in a month-end balance for each hour.
The Customer is required to adjust the scheduling of resources in
such a way as to reduce the accumulation towards zero. It is recognized
that the inadvertent hourly flows can be both negative and positive,
and that offsetting flows should deter a significant accumulation of
inadvertent. Unless otherwise specified by contract, in the event any
hourly month-end balance exceeds 12 MWhs, the excess will be subject to
Section 3.1 or Section 3.2 of this Rate Schedule, depending on the
direction of the accumulation.
3. Non-Federal Transmission/Interconnection Facilities Service
Penalties, Terms, and Conditions
3.1. Capacity Overrun Penalty
3.1.1. Penalty Charge for Capacity Overrun
For each hour during which energy flows outside the authorized
bandwidth, the Customer will be obliged to purchase such energy at the
following rates:
------------------------------------------------------------------------
Rate per
Months associated with charge kilowatt
------------------------------------------------------------------------
March, April, May, October, November, December.......... $0.15
[[Page 51154]]
January, February, June, July, August, September........ 0.30
------------------------------------------------------------------------
3.1.2. Applicability of Capacity Overrun Penalty
Customers who receive deliveries within Southwestern's Balancing
Authority Area are obligated to provide resources sufficient to meet
their loads. Such obligation is not related to the amount of
transmission capacity that such Customers may have reserved for
transmission service to a particular load. In the event that a Customer
underschedules its resources to serve its load, resulting in a
difference between resources and actual metered load (adjusted for
transformer losses as applicable) outside the authorized bandwidth for
Energy Imbalance Service for any hour, then such Customer is subject to
the Capacity Overrun Penalty.
3.2. Unauthorized Use of Energy Imbalance Service by Overscheduling of
Resources
In the event that a Customer schedules greater resources than are
needed to serve its load, such that energy flows at rates beyond the
authorized bandwidth for the use of Energy Imbalance Service,
Southwestern retains such energy at no cost to Southwestern and with no
obligation to return such energy.
3.3. Power Factor Penalty
3.3.1. Requirements Related to Power Factor
Any Customer served from facilities owned by or available by
contract to Southwestern will be required to maintain a power factor of
not less than 95 percent and will be subject to the following
provisions.
3.3.2. Determination of Power Factor
The power factor will be determined for all Demand Periods and
shall be calculated under the formula:
[GRAPHIC] [TIFF OMITTED] TN14SE21.001
with the factors defined as follows:
PF = The power factor for any Demand Period of the month.
kWh = The total quantity of energy which is delivered during such
Demand Period to the point of delivery or interconnection in
accordance with Section 3.3.4.
rkVAh = The total quantity of reactive kilovolt-ampere-hours (kVARs)
delivered during such Demand Period to the point of delivery or
interconnection in accordance with Section 3.3.4.
3.3.3. Penalty Charge for Power Factor
The Customer shall be assessed a penalty for all Demand Periods of
a month where the power factor is less than 95 percent lagging. For any
Demand Period during a particular month such penalty shall be in
accordance with the following formula:
C = D x (0.95 - LPF) x $0.10
with the factors defined as follows:
C = The charge in dollars to be assessed for any particular Demand
Period of such month that the determination of power factor ``PF''
is calculated to be less than 95 percent lagging.
D = The Customer's demand in kilowatts at the point of delivery for
such Demand Period in which a low power factor was calculated.
LPF = The lagging power factor, if any, determined by the formula
``PF'' for such Demand Period.
If C is negative, then C = zero (0).
3.3.4. Applicability of Power Factor Penalty
The Power Factor Penalty is applicable to radial interconnections
with the System of Southwestern. The total Power Factor Penalty for any
month shall be the sum of all charges ``C'' for all Demand Periods of
such month. No penalty is assessed for leading power factor.
Southwestern, in its sole judgment and at its sole option, may
determine whether power factor calculations should be applied to (i) a
single physical point of delivery, (ii) a combination of physical
points of delivery where a Customer has a single, electrically
integrated load, (iii) or interconnections. The general criteria for
such decision shall be that, given the configuration of the Customer's
and Southwestern's systems, Southwestern will determine, in its sole
judgment and at its sole option, whether the power factor calculation
more accurately assesses the detrimental impact on Southwestern's
system when the above formula is calculated for a single physical point
of delivery, a combination of physical points of delivery, or for an
interconnection as specified by an Interconnection Agreement.
Southwestern, at its sole option, may reduce or waive Power Factor
Penalties when, in Southwestern's sole judgment, low power factor
conditions were not detrimental to the System of Southwestern due to
particular loading and voltage conditions at the time the power factor
dropped below 95 percent lagging.
4. Non-Federal Transmission/Interconnection Facilities Service
Miscellaneous Rates, Terms, and Conditions
4.1. Real Power Losses
Customers are required to self-provide all Real Power Losses for
non-Federal energy transmitted by Southwestern on behalf of such
Customers under the provisions detailed below.
Real Power Losses are computed as four (4) percent of the total
amount of non-Federal energy transmitted by Southwestern. The
Customer's monthly Real Power Losses are computed each month on a
megawatthour basis as follows:
ML = 0.04 x NFE
with the factors defined as follows:
ML = The total monthly loss energy, rounded to the nearest
megawatthour, to be scheduled by a Customer for receipt by
Southwestern for Real Power Losses associated with non-Federal
energy transmitted on behalf of such Customer; and
NFE = The amount of non-Federal energy that was transmitted by
Southwestern on behalf of a Customer during a particular month.
The Customer must schedule or cause to be scheduled to
Southwestern, Real Power Losses for which it is responsible subject to
the following conditions:
4.1.1. The Customer shall schedule and deliver Real Power Losses
back to Southwestern during the second month after they were incurred
by Southwestern in the transmission of the Customer's non-Federal power
and energy over the System of Southwestern unless such Customer has
accounted for Real Power Losses as part of a metering arrangement with
Southwestern.
4.1.2. On or before the twentieth day of each month, Southwestern
shall determine the amount of non-Federal loss energy it provided on
behalf of the Customer during the previous month and provide a written
schedule to the Customer setting forth hour-by-hour the quantities of
non-Federal energy to be delivered to Southwestern as losses during the
next month.
4.1.3. Real Power Losses not delivered to Southwestern by the
Customer, according to the schedule provided, during the month in which
such losses
[[Page 51155]]
are due shall be billed by Southwestern to the Customer to adjust the
end-of-month loss energy balance to zero (0) megawatthours and the
Customer shall be obliged to purchase such energy at the following
rates:
------------------------------------------------------------------------
Rate per
Months associated with charge kilowatthour
------------------------------------------------------------------------
March, April, May, October, November, December.......... $0.15
January, February, June, July, August, September........ 0.30
------------------------------------------------------------------------
4.1.4. Real Power Losses delivered to Southwestern by the Customer
in excess of the losses due during the month shall be purchased by
Southwestern from the Customer at a rate per megawatthour equal to
Southwestern's rate per megawatthour for Supplemental Peaking Energy,
as set forth in Southwestern's then-effective Rate Schedule for Hydro
Peaking Power to adjust such hourly end-of-month loss energy balance to
zero (0) megawatthours.
UNITED STATES DEPARTMENT OF ENERGY
SOUTHWESTERN POWER ADMINISTRATION
RATE SCHEDULE EE-13 \1 **\
---------------------------------------------------------------------------
\1\ Supersedes Rate Schedule EE-11.
** Extended through September 30, 2023, by approval of Rate
Order No. SWPA-77 by the Administrator, Southwestern Power
Administration.
---------------------------------------------------------------------------
WHOLESALE RATES FOR EXCESS ENERGY
Effective: During the period October 1, 2013, through September 30,
2021,** in accordance with the Federal Energy Regulatory Commission
(FERC) order issued in Docket No. EF14-1-000 (Jan. 9, 2014), extension
approved by the Deputy Secretary in Docket No. EF14-1-002 (Sept. 13,
2017), extension approved by Assistant Secretary for Electricity in
Rate Order No. 74 (Sept. 22, 2019), and extension approved by the
Administrator in Rate Order No. 77 (August 30, 2021).
Available: In the marketing area of Southwestern Power
Administration (Southwestern), described generally as the States of
Arkansas, Kansas, Louisiana, Missouri, Oklahoma, and Texas.
Applicable: To electric utilities which, by contract, may purchase
Excess Energy from Southwestern.
Character and Conditions of Service: Three-phase, alternating
current, delivered at approximately 60 Hertz, at the nominal voltage(s)
and at the point(s) of delivery specified by contract.
1. Wholesale Rates, Terms, and Conditions for Excess Energy
Excess Energy will be furnished at such times and in such amounts
as Southwestern determines to be available.
1.2. Transmission and Related Ancillary Services
Transmission service for the delivery of Excess Energy shall be the
sole responsibility of such customer purchasing Excess Energy.
1.3. Excess Energy Charge
$0.0094 per kilowatthour of Excess Energy delivered.
[FR Doc. 2021-19718 Filed 9-13-21; 8:45 am]
BILLING CODE 6450-01-P
</pre><script data-cfasync="false" src="/cdn-cgi/scripts/5c5dd728/cloudflare-static/email-decode.min.js"></script></body>
</html>This is legal information, not legal advice. Laws vary by jurisdiction and change frequently. Always verify current law with official sources and consult a licensed attorney in your jurisdiction for advice on your specific situation.