Notice2021-18421
Petition for Exemption From the Federal Motor Vehicle Theft Prevention Standard; Ford Motor Company
Primary source
Metadata and text below are from the Federal Register, a public-domain U.S. government work. Always verify the official published version before relying on it for any legal matter.
Published
August 26, 2021
Issuing agencies
Transportation DepartmentNational Highway Traffic Safety Administration
Abstract
This document grants in full the Ford Motor Company (Ford) petition for exemption from the Federal Motor Vehicle Theft Prevention Standard (theft prevention standard) for its confidential vehicle line beginning in model year (MY) 2022. The petition is granted because the agency has determined that the antitheft device to be placed on the line as standard equipment is likely to be as effective in reducing and deterring motor vehicle theft as compliance with the parts-marking requirements of the theft prevention standard. Ford also requested confidential treatment for specific information in its petition. Therefore, no confidential information provided for purposes of this notice has been disclosed.
Full Text
<html>
<head>
<title>Federal Register, Volume 86 Issue 163 (Thursday, August 26, 2021)</title>
</head>
<body><pre>
[Federal Register Volume 86, Number 163 (Thursday, August 26, 2021)]
[Notices]
[Pages 47717-47719]
From the Federal Register Online via the Government Publishing Office [<a href="http://www.gpo.gov">www.gpo.gov</a>]
[FR Doc No: 2021-18421]
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
National Highway Traffic Safety Administration
Petition for Exemption From the Federal Motor Vehicle Theft
Prevention Standard; Ford Motor Company
AGENCY: National Highway Traffic Safety Administration (NHTSA),
Department of Transportation (DOT).
ACTION: Grant of petition for exemption.
-----------------------------------------------------------------------
SUMMARY: This document grants in full the Ford Motor Company (Ford)
petition for exemption from the Federal Motor Vehicle Theft Prevention
Standard (theft prevention standard) for its confidential vehicle line
beginning in model year (MY) 2022. The petition is granted because the
agency has determined that the antitheft device to be placed on the
line as standard equipment is likely to be as effective in reducing and
deterring motor vehicle theft as compliance with the parts-marking
requirements of the theft prevention standard. Ford also requested
confidential treatment for specific information in its petition.
Therefore, no confidential information provided for purposes of this
notice has been disclosed.
DATES: The exemption granted by this notice is effective beginning with
the 2022 model year.
FOR FURTHER INFORMATION CONTACT: Carlita Ballard, Office of
International Policy, Fuel Economy, and Consumer Programs, NHTSA, West
Building, W43-439, NRM-310, 1200 New Jersey Avenue SE, Washington, DC
20590. Ms. Ballard's phone number is (202) 366-5222. Her fax number is
(202) 493-2990.
SUPPLEMENTARY INFORMATION: Under 49 U.S.C. chapter 331, the Secretary
of Transportation (and the National Highway Traffic Safety
Administration (NHTSA) by delegation) is required to promulgate a theft
prevention standard to provide for the identification of certain motor
vehicles and their major replacement parts to impede motor vehicle
theft. NHTSA promulgated regulations at 49 CFR part 541 (theft
prevention standard) to require parts-marking for specified passenger
motor vehicles and light trucks. Pursuant to 49 U.S.C. 33106,
manufacturers that are subject to the parts-marking requirements may
petition the Secretary of Transportation for an exemption for a line of
passenger motor vehicles equipped with an antitheft device as standard
equipment that the Secretary decides is likely to be as effective in
reducing and deterring motor vehicle theft as compliance with the
parts-marking requirements. In accordance with this statute, NHTSA
promulgated 49 CFR part 543, which establishes the process through
which manufacturers may seek an exemption from the theft prevention
standard.
49 CFR 543.5 provides general submission requirements for petitions
and states that each manufacturer may petition NHTSA for an exemption
of one vehicle line per model year. Among other requirements,
manufacturers must identify whether the exemption is sought under
section 543.6 or section 543.7. Under section 543.6, a manufacturer may
request an exemption by providing specific information about the
antitheft device, its capabilities, and the reasons the petitioner
believes the device to be as effective at reducing and deterring theft
as compliance with the parts-marking requirements. Section 543.7
permits a manufacturer to request an exemption under a more streamlined
process if the vehicle line is equipped with an antitheft device (an
``immobilizer'') as standard equipment that complies with one of the
standards specified in that section.
Section 543.8 establishes requirements for processing petitions for
exemption from the theft prevention standard. As stated in section
543.8(a), NHTSA processes any complete exemption petition. If NHTSA
receives an incomplete petition, NHTSA will notify the petitioner of
the deficiencies. Once NHTSA receives a complete petition the agency
will process it and, in accordance with section 543.8(b), will grant
the petition if it determines that, based upon substantial evidence,
the standard equipment antitheft device is likely to be as effective in
reducing and deterring motor vehicle theft as compliance with the
parts-marking requirements of part 541.
Section 543.8(c) requires NHTSA to issue its decision either to
grant or to deny an exemption petition not later than 120 days after
the date on which a complete petition is filed. If NHTSA does not make
a decision within the 120-day period, the petition shall be deemed to
be approved and the manufacturer shall be exempt from the standard for
the line covered by the petition for the subsequent model year.\1\
Exemptions granted under part 543 apply only to the vehicle line or
lines that are subject to the grant and that are equipped with the
antitheft device on which the line's exemption was based, and are
effective for the model year beginning after the model year in which
NHTSA issues the notice of exemption, unless the notice of exemption
specifies a later year.
---------------------------------------------------------------------------
\1\ 49 U.S.C. 33106(d).
---------------------------------------------------------------------------
Sections 543.8(f) and (g) apply to the manner in which NHTSA's
decisions on petitions are to be made known. Under section 543.8(f), if
the petition is sought under section 543.6, NHTSA publishes a notice of
its decision to grant or deny the exemption petition in the Federal
Register and notifies the petitioner in writing. Under section
543.8(g), if the petition is sought under section 543.7, NHTSA notifies
the petitioner in writing of the agency's decision to grant or deny the
exemption petition.
This grant of petition for exemption considers Ford Motor
Corporation's (Ford) petition for its confidential vehicle line
beginning in MY 2022.
I. Specific Petition Content Requirements Under 49 CFR 543.6
Pursuant to 49 CFR part 543, Exemption from Vehicle Theft
Prevention, Ford petitioned for an exemption for its specified vehicle
line from the parts-marking requirements of the theft prevention
standard, beginning in MY 2022. Ford petitioned under 49 CFR 543.6,
Petition: Specific content requirements, which, as described above,
requires manufacturers to provide specific information about the
antitheft device installed as standard equipment on all vehicles in the
line for which an exemption is sought, the antitheft device's
capabilities, and the reasons the petitioner believes the device to be
as effective at reducing and deterring theft as compliance with the
parts-marking requirements.
More specifically, section 543.6(a)(1) requires petitions to
include a statement that an antitheft device will be installed as
standard equipment on all vehicles in the line for which the exemption
is sought. Under section 543.6(a)(2), each petition must list each
component in the antitheft system, and include a diagram showing the
location of each of those components within the vehicle. As required by
section 543.6(a)(3), each petition must include an explanation of the
means and process by which the
[[Page 47718]]
device is activated and functions, including any aspect of the device
designed to: (1) Facilitate or encourage its activation by motorists;
(2) attract attention to the efforts of an unauthorized person to enter
or move a vehicle by means other than a key; (3) prevent defeating or
circumventing the device by an unauthorized person attempting to enter
a vehicle by means other than a key; (4) prevent the operation of a
vehicle which an unauthorized person has entered using means other than
a key; and (5) ensure the reliability and durability of the device.\2\
---------------------------------------------------------------------------
\2\ 49 CFR 543.6(a)(3).
---------------------------------------------------------------------------
In addition to providing information about the antitheft device and
its functionality, petitioners must also submit the reasons for their
belief that the antitheft device will be effective in reducing and
deterring motor vehicle theft, including any theft data and other data
that are available to the petitioner and form a basis for that
belief,\3\ and the reasons for their belief that the agency should
determine that the antitheft device is likely to be as effective as
compliance with the parts-marking requirements of part 541 in reducing
and deterring motor vehicle theft. In support of this belief, the
petitioners should include any statistical data that are available to
the petitioner and form the basis for the petitioner's belief that a
line of passenger motor vehicles equipped with the antitheft device is
likely to have a theft rate equal to or less than that of passenger
motor vehicles of the same, or a similar, line which have parts marked
in compliance with part 541.\4\
---------------------------------------------------------------------------
\3\ 49 CFR 543.6(a)(4).
\4\ 49 CFR 543.6(a)(5).
---------------------------------------------------------------------------
The following sections describe Ford's petition information
provided pursuant to 49 CFR part 543, Exemption from Vehicle Theft
Prevention. To the extent that specific information in Ford's petition
is subject to a properly filed confidentiality request, that
information was not disclosed as part of this notice.\5\
---------------------------------------------------------------------------
\5\ 49 CFR 512.20(a).
---------------------------------------------------------------------------
II. Ford's Petition for Exemption
In a petition dated November 26, 2020 and updated on April 30,
2021,\6\ Ford requested an exemption from the parts-marking
requirements of the theft prevention standard for its confidential
vehicle line beginning with MY 2022.
---------------------------------------------------------------------------
\6\ As discussed above, per 49 CFR 543.8(a), NHTSA processes the
petition once the manufacturer submits all the information required
by 49 CFR part 543.
---------------------------------------------------------------------------
In its petition, Ford provided a detailed description and diagram
of the identity, design, and location of the components of the
antitheft device for the confidential vehicle line. Ford stated that
its MY 2022 confidential vehicle line will be installed with a passive,
transponder based, electronic engine immobilizer antitheft device as
standard equipment. Specifically, Ford stated that its vehicle line
will be installed with the SecuriLock Passive Antitheft Engine
Immobilizer System (PATS). Key components of its SecuriLock antitheft
device will include a key, powertrain control module (PCM) or hybrid
powertrain control module (HPCM), body control module (BCM), radio
transceiver module and an anti-lock braking system module (ABS). Ford
also stated that its vehicle line will be equipped with a hood release,
counterfeit resistant VIN label, secondary VINs inscribed on the body
and a cabin accessible with a valid keycode as standard antitheft
features.
Ford also stated that it will offer its intelligent access with
push button start (IAwPB) system as optional equipment. For purposes of
the theft prevention standard, NHTSA generally only considers the
antitheft device equipped on the vehicle as standard equipment. However
in this case, while the SecuriLock PATS and IAwPB systems are mutually
exclusive antitheft systems, NHTSA has previously approved the IAwPB
antitheft system as standard equipment for the Ford Bronco Sport
vehicle line. The IAwPB system is described in the grant of petition
for exemption published in the Federal Register on August 12, 2020.\7\
---------------------------------------------------------------------------
\7\ 85 FR 48759 (Aug. 12, 2020).
---------------------------------------------------------------------------
Pursuant to section 543.6(a)(3), Ford explained that its SecuriLock
system is activated when the ignition key is turned to the start
position allowing the transceiver module to read the ignition key code
and transmit an encrypted message from the key code to the instrument
cluster, this encrypted message will then determine that the key is
valid and will authorize the engine to start by sending a separate
encrypted message to the PCM or the HPCM. Ford also stated that the
powertrain will only function if the key code matches the unique
identification key code that was previously programmed into the PCM/
HPCM. If the codes do not match, the engine starter, ignition spark and
the fuel will be disabled, once active, no other action from the
operator is required. Ford further stated that the integration of the
transponder into the normal operation of the ignition key assures
activation of the system. Deactivation of the immobilizer system occurs
automatically each time an engine start occurs.
As required in section 543.6(a)(3)(v), Ford provided information on
the reliability and durability of its proposed device. To ensure
reliability and durability of the device, Ford conducted tests based on
its own specified standards. Ford provided a detailed list of the tests
conducted. Additionally, Ford stated that its device is extremely
reliable and durable because several features make it difficult to
defeat with communications between the SecuriLock transponder and the
PCM/HPCM that are encrypted because there are 18 quintillion (1.8 x
10\19\) different possible codes making a successful key duplication by
chance virtually impossible. Also, the SecuriLock system and the PCM/
HPCM share security data immediately when first installed during
vehicle assembly, forming matched modules. Ford further stated that
mechanically overriding the system is not possible; for example, slam-
pulling the ignition lock cylinder will not allow unauthorized start of
the vehicle without the correct code being transmitted to the
electronic control module. Ford stated that the system is extremely
reliable and durable because there are no moving parts. Ford further
stated that its sophisticated design and operation of the SecuriLock's
electronic engine immobilizer system makes conventional theft methods
ineffective (e.g., hot-wiring or attacking the ignition lock cylinder)
and drive away thefts are virtually eliminated with this system.
Ford referenced National Insurance Crime Bureau (NICB) data for the
Ford EcoSport (a vehicle size and segment comparable to the line
covered by this petition), which showed 2 thefts per thousand vehicles
since the EcoSport's production start. The Ford EcoSport was granted an
exemption for its MY 2018 vehicles (See 82 FR 22060, May 11, 2017).
Ford also stated that its SecuriLock system installed on its
confidential vehicle line is similar in design and implementation to
the system offered on the MY 2021 Ford Bronco Sport vehicle line, which
is detailed in the August 2020 notice discussed above. Ford further
stated that its sophisticated design and operation of its SecuriLock
immobilizer system renders ineffective conventional theft methods, such
as hot-wiring the ignition cylinder and drive away thefts are virtually
eliminated with this antitheft system. Ford concluded that they
believed the vehicle line covered by the petition will have a very low
theft rate based on the theft rate of the Ford EcoSport, a vehicle of a
similar size with similar equipment.
[[Page 47719]]
III. Decision To Grant the Petition
Pursuant to 49 U.S.C. 33106 and 49 CFR 543.8(b), the agency grants
a petition for exemption from the parts-marking requirements of part
541, either in whole or in part, if it determines that, based upon
substantial evidence, the standard equipment antitheft device is likely
to be as effective in reducing and deterring motor vehicle theft as
compliance with the parts-marking requirements of part 541. The agency
finds that Ford has provided adequate reasons for its belief that the
antitheft device for its vehicle line is likely to be as effective in
reducing and deterring motor vehicle theft as compliance with the
parts-marking requirements of the theft prevention standard. This
conclusion is based on the information Ford provided about its
antitheft device. NHTSA believes, based on Ford's supporting evidence,
that the antitheft device described for its vehicle line is likely to
be as effective in reducing and deterring motor vehicle theft as
compliance with the parts-marking requirements of the theft prevention
standard.
The agency concludes that Ford's antitheft device will provide four
types of performance features listed in section 543.6(a)(3): Promoting
activation; preventing defeat or circumvention of the device by
unauthorized persons; preventing operation of the vehicle by
unauthorized entrants; and ensuring the reliability and durability of
the device.
The agency notes that 49 CFR part 541, Appendix A-1, identifies
those lines that are exempted from the theft prevention standard for a
given model year. 49 CFR 543.8(f) contains publication requirements
incident to the disposition of all part 543 petitions. Advanced
listing, including the release of future product nameplates, the
beginning model year for which the petition is granted and a general
description of the antitheft device is necessary in order to notify law
enforcement agencies of new vehicle lines exempted from the parts-
marking requirements of the theft prevention standard.
If Ford decides not to use the exemption for its requested vehicle
line, the manufacturer must formally notify the agency. If such a
decision is made, the line must be fully marked as required by 49 CFR
541.5 and 541.6 (marking of major component parts and replacement
parts).
NHTSA notes that if Ford wishes in the future to modify the device
on which this exemption is based, the company may have to submit a
petition to modify the exemption. Section 543.8(d) states that a part
543 exemption applies only to vehicles that belong to a line exempted
under this part and equipped with the antitheft device on which the
line's exemption is based. Further, section 543.10(c)(2) provides for
the submission of petitions ``to modify an exemption to permit the use
of an antitheft device similar to but differing from the one specified
in the exemption.''
The agency wishes to minimize the administrative burden that
section 543.10(c)(2) could place on exempted vehicle manufacturers and
itself. The agency did not intend in drafting part 543 to require the
submission of a modification petition for every change to the
components or design of an antitheft device. The significance of many
such changes could be de minimis. Therefore, NHTSA suggests that if
Ford contemplates making any changes, the effects of which might be
characterized as de minimis, it should consult the agency before
preparing and submitting a petition to modify.
For the foregoing reasons, the agency hereby grants in full Ford's
petition for exemption for the confidential vehicle line from the
parts-marking requirements of 49 CFR part 541, beginning with its MY
2022 vehicles.
Issued under authority delegated in 49 CFR 1.95 and 501.8.
Raymond R. Posten,
Associate Administrator for Rulemaking.
[FR Doc. 2021-18421 Filed 8-25-21; 8:45 am]
BILLING CODE 4910-59-P
</pre></body>
</html>Indexed from Federal Register on August 26, 2021.
This is legal information, not legal advice. Laws vary by jurisdiction and change frequently. Always verify current law with official sources and consult a licensed attorney in your jurisdiction for advice on your specific situation.