Airworthiness Directives; PZL Swidnik S.A. Helicopters
Primary source
Metadata and text below are from the Federal Register, a public-domain U.S. government work. Always verify the official published version before relying on it for any legal matter.
Issuing agencies
Abstract
The FAA is adopting a new airworthiness directive (AD) for certain PZL Swidnik S.A. Model PZL W-3A helicopters. This AD requires visually inspecting the bonding on a certain part-numbered fairing installed on a certain part-numbered vibration absorber, improving the bonding if necessary, using improved installation procedures to secure the fairing to the vibration absorber, and removing certain parts from service. This AD also prohibits installing the affected part unless it is inspected and installed per the AD requirements. This AD was prompted by a report of a broken bolt securing the fairing to the vibration absorber that resulted from an incorrect torque value for the nut used to secure the fairing to the vibration absorber. The FAA is issuing this AD to address the unsafe condition on these products.
This is legal information, not legal advice. Laws vary by jurisdiction and change frequently. Always verify current law with official sources and consult a licensed attorney in your jurisdiction for advice on your specific situation.