Proposed Rule2021-15474
Airworthiness Directives; Pacific Aerospace Limited Airplanes
Primary source
Metadata and text below are from the Federal Register, a public-domain U.S. government work. Always verify the official published version before relying on it for any legal matter.
Published
July 22, 2021
Issuing agencies
Transportation DepartmentFederal Aviation Administration
Abstract
The FAA proposes to adopt a new airworthiness directive (AD) for certain Pacific Aerospace Limited Model 750XL airplanes. This proposed AD was prompted by mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as installation of the wing leading edge tank fuel pickup assembly in a pre-stressed condition, which could cause cracks in the wing spar web or the fuel pickup assembly pipe. This proposed AD would require inspecting the angle of the support bracket on the wing leading edge tank fuel pickup assembly and taking any necessary corrective actions. The FAA is proposing this AD to address the unsafe condition on these products.
Full Text
<html>
<head>
<title>Federal Register, Volume 86 Issue 138 (Thursday, July 22, 2021)</title>
</head>
<body><pre>
[Federal Register Volume 86, Number 138 (Thursday, July 22, 2021)]
[Proposed Rules]
[Pages 38615-38617]
From the Federal Register Online via the Government Publishing Office [<a href="http://www.gpo.gov">www.gpo.gov</a>]
[FR Doc No: 2021-15474]
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. FAA-2021-0576; Project Identifier 2019-CE-008-AD]
RIN 2120-AA64
Airworthiness Directives; Pacific Aerospace Limited Airplanes
AGENCY: Federal Aviation Administration (FAA), DOT.
ACTION: Notice of proposed rulemaking (NPRM).
-----------------------------------------------------------------------
SUMMARY: The FAA proposes to adopt a new airworthiness directive (AD)
for certain Pacific Aerospace Limited Model 750XL airplanes. This
proposed AD was prompted by mandatory continuing airworthiness
information (MCAI) originated by an aviation authority of another
country to identify and correct an unsafe condition on an aviation
product. The MCAI describes the unsafe condition as installation of the
wing leading edge tank fuel pickup assembly in a pre-stressed
condition, which could cause cracks in the wing spar web or the fuel
pickup assembly pipe. This proposed AD would require inspecting the
angle of the support bracket on the wing leading edge tank fuel pickup
assembly and taking any necessary corrective actions. The FAA is
proposing this AD to address the unsafe condition on these products.
DATES: The FAA must receive comments on this proposed AD by September
7, 2021.
ADDRESSES: You may send comments, using the procedures found in 14 CFR
11.43 and 11.45, by any of the following methods:
<bullet> Federal eRulemaking Portal: Go to <a href="https://www.regulations.gov">https://www.regulations.gov</a>. Follow the instructions for submitting comments.
<bullet> Fax: (202) 493-2251.
<bullet> Mail: U.S. Department of Transportation, Docket
Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New
Jersey Avenue SE, Washington, DC 20590.
<bullet> Hand Delivery: Deliver to Mail address above between 9
a.m. and 5 p.m., Monday through Friday, except Federal holidays. For
service information identified in this AD, contact the Civil Aviation
Authority of New Zealand, Level 15, Asteron Centre, 55 Featherston
Street, Wellington 6011; phone: +64 4 560 9400; fax: +64 4 569 202;
email: <a href="/cdn-cgi/l/email-protection#0d64636b624d6e6c6c236a627b79236377"><span class="__cf_email__" data-cfemail="60090e060f200301014e070f16144e0e1a">[email protected]</span></a>.
You may view this service information at the FAA, Airworthiness
Products Section, Operational Safety Branch, 901 Locust, Kansas City,
MO 64106. For information on the availability of this material at the
FAA, call (816) 329-4148.
Examining the AD Docket
You may examine the AD docket at <a href="https://www.regulations.gov">https://www.regulations.gov</a> by
searching for and locating Docket No. FAA-2021-0576; or in person at
Docket Operations between 9 a.m. and 5 p.m., Monday through Friday,
except Federal holidays. The AD docket contains this NPRM, the MCAI,
any comments received, and other information. The street address for
Docket Operations is listed above. Comments will be available in the AD
docket shortly after receipt.
FOR FURTHER INFORMATION CONTACT: Mike Kiesov, Aviation Safety Engineer,
General Aviation & Rotorcraft Section, International Validation Branch,
FAA, 901 Locust, Room 301, Kansas City, MO 64106; phone: (816) 329-
4144; fax: (816) 329-4090; email: <a href="/cdn-cgi/l/email-protection#432e2a28266d282a26302c35032522226d242c35"><span class="__cf_email__" data-cfemail="9df0f4f6f8b3f6f4f8eef2ebddfbfcfcb3faf2eb">[email protected]</span></a>.
SUPPLEMENTARY INFORMATION:
Comments Invited
The FAA invites you to send any written relevant data, views, or
arguments about this proposal. Send your comments to an address listed
under ADDRESSES. Include ``Docket No. FAA-2021-0576; Project Identifier
2019-CE-008-AD'' at the beginning of your comments. The most helpful
comments reference a specific portion of the proposal, explain the
reason for any recommended change, and include supporting data. The FAA
will consider all comments received by the closing date and may amend
this proposal because of those comments.
Except for Confidential Business Information (CBI) as described in
the following paragraph, and other information as described in 14 CFR
11.35, the FAA will post all comments received, without change, to
<a href="https://www.regulations.gov">https://www.regulations.gov</a>, including any personal information you
provide. The agency will also post a report summarizing each
substantive verbal contact received about this NPRM.
Confidential Business Information
CBI is commercial or financial information that is both customarily
and actually treated as private by its owner. Under the Freedom of
Information Act (FOIA) (5 U.S.C. 552), CBI is exempt from public
disclosure. If your comments responsive to this NPRM contain commercial
or financial information that is customarily treated as private, that
you actually treat as private, and that is relevant or responsive to
this NPRM, it is important that you clearly designate the submitted
comments as CBI. Please mark each page of your submission containing
CBI as ``PROPIN.'' The FAA will treat such marked submissions as
confidential under the FOIA, and they will not be placed in the public
docket of this NPRM. Submissions containing CBI should be sent to Mike
Kiesov, Aviation Safety Engineer, General Aviation & Rotorcraft
Section, International Validation Branch, FAA, 901 Locust, Room 301,
Kansas City, MO 64106. Any commentary that the FAA receives which is
not specifically designated as CBI will be placed in the public docket
for this rulemaking.
Background
The Civil Aviation Authority (CAA), which is the aviation authority
for New Zealand, has issued AD No. DCA/
[[Page 38616]]
750XL/36, effective date February 7, 2019 (referred to after this as
``the MCAI''), to correct an unsafe condition for certain Pacific
Aerospace Limited Model 750XL airplanes. The MCAI states:
DCA/750XL/36 is prompted by a review of the installation of the
wing leading edge fuel pickup assemblies. It was found that the fuel
pickup assemblies could have been installed in a pre-stressed
condition, which could result in cracks in the wing spar web, or
cracks in the fuel pickup pipe. The [CAA] AD is issued to introduce
the instructions in Pacific Aerospace Mandatory Service Bulletin
(MSB) PACSB/XL/109 issue 1, dated 16 January 2019.
The MCAI requires inspecting the installation of the fuel pickup
assembly and the wing spar web on both wings and, if any defects are
found, taking all necessary corrective actions. You may examine the
MCAI in the AD docket at <a href="https://www.regulations.gov">https://www.regulations.gov</a> by searching for
and locating Docket No. FAA-2021-0576.
Related Service Information Under 1 CFR Part 51
The FAA reviewed Pacific Aerospace Mandatory Service Bulletin
PACSB/XL/109, Issue 1, dated January 16, 2019. The service information
contains procedures for inspecting the wing leading edge tank fuel
pickup assembly to determine if the assembly is under stress and for
additional inspections and corrective actions if necessary. This
service information is reasonably available because the interested
parties have access to it through their normal course of business or by
the means identified in the ADDRESSES section.
FAA's Determination
This product has been approved by the aviation authority of another
country and is approved for operation in the United States. Pursuant to
the FAA's bilateral agreement with this State of Design Authority, it
has notified the FAA of the unsafe condition described in the MCAI and
service information referenced above. The FAA is issuing this NPRM
after determining the unsafe condition described previously is likely
to exist or develop on other products of the same type design.
Proposed AD Requirements in This NPRM
This proposed AD would require accomplishing the actions specified
in the service information already described.
Costs of Compliance
The FAA estimates that this AD, if adopted as proposed, would
affect 23 airplanes of U.S. registry. The FAA also estimates that it
would take about 1 work-hour per airplane to comply with the inspection
that would be required by this proposed AD. The average labor rate is
$85 per work-hour.
Based on these figures, the FAA estimates the inspection cost of
this proposed AD on U.S. operators to be $1,955, or $85 per airplane.
In addition, the FAA estimates that any necessary follow-on actions
would take 4 work-hours and require parts costing $500, for a cost of
$840 per airplane. The FAA has no way of determining the number of
airplanes that may need these actions.
The FAA has included all known costs in its cost estimate.
According to the manufacturer, however, some of the costs of this
proposed AD may be covered under warranty, thereby reducing the cost
impact on affected operators.
Authority for This Rulemaking
Title 49 of the United States Code specifies the FAA's authority to
issue rules on aviation safety. Subtitle I, section 106, describes the
authority of the FAA Administrator. Subtitle VII: Aviation Programs,
describes in more detail the scope of the Agency's authority.
The FAA is issuing this rulemaking under the authority described in
Subtitle VII, Part A, Subpart III, Section 44701: General requirements.
Under that section, Congress charges the FAA with promoting safe flight
of civil aircraft in air commerce by prescribing regulations for
practices, methods, and procedures the Administrator finds necessary
for safety in air commerce. This regulation is within the scope of that
authority because it addresses an unsafe condition that is likely to
exist or develop on products identified in this rulemaking action.
Regulatory Findings
The FAA determined that this proposed AD would not have federalism
implications under Executive Order 13132. This proposed AD would not
have a substantial direct effect on the States, on the relationship
between the national government and the States, or on the distribution
of power and responsibilities among the various levels of government.
For the reasons discussed above, I certify this proposed
regulation:
(1) Is not a ``significant regulatory action'' under Executive
Order 12866,
(2) Would not affect intrastate aviation in Alaska, and
(3) Would not have a significant economic impact, positive or
negative, on a substantial number of small entities under the criteria
of the Regulatory Flexibility Act.
List of Subjects in 14 CFR Part 39
Air transportation, Aircraft, Aviation safety, Incorporation by
reference, Safety.
The Proposed Amendment
Accordingly, under the authority delegated to me by the
Administrator, the FAA proposes to amend 14 CFR part 39 as follows:
PART 39--AIRWORTHINESS DIRECTIVES
0
1. The authority citation for part 39 continues to read as follows:
Authority: 49 U.S.C. 106(g), 40113, 44701.
Sec. 39.13 [Amended]
0
2. The FAA amends Sec. 39.13 by adding the following new airworthiness
directive:
Pacific Aerospace Limited: Docket No. FAA-2021-0576; Project
Identifier 2019-CE-008-AD.
(a) Comments Due Date
The FAA must receive comments on this airworthiness directive
(AD) by September 7, 2021.
(b) Affected ADs
None.
(c) Applicability
This AD applies to Pacific Aerospace Limited Model 750XL
airplanes, serial numbers 177, 186 through 213, 220, 8001, and 8002,
certificated in any category.
(d) Subject
Joint Aircraft System Component (JASC) Code 3600, Pneumatic
System.
(e) Unsafe Condition
This AD was prompted by mandatory continuing airworthiness
information (MCAI) originated by an aviation authority of another
country to identify and address an unsafe condition on an aviation
product. The MCAI describes the unsafe condition as installation of
the wing leading edge tank fuel pickup assembly in a pre-stressed
condition, which could cause cracks in the wing spar web or the fuel
pickup assembly pipe. The FAA is issuing this AD to prevent cracks
in the wing spar web and the fuel pickup pipe. This condition could
result in reduced structural integrity of the wing spar or cause a
fuel leak, which could result in an engine fire.
(f) Compliance
Comply with this AD within the compliance times specified,
unless already done.
(g) Required Actions
Within 165 hours time-in-service after the effective date of
this AD, inspect the angle of the support bracket on the wing
leading edge
[[Page 38617]]
tank fuel pickup assembly and, before further flight, take any
necessary additional actions and corrective actions by following the
Accomplishment Instructions in Pacific Aerospace Mandatory Service
Bulletin PACSB/XL/109, Issue 1, dated January 16, 2019.
(h) Alternative Methods of Compliance (AMOCs)
(1) The Manager, International Validation Branch, has the
authority to approve AMOCs for this AD, if requested using the
procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19,
send your request to your principal inspector or local Flight
Standards District Office, as appropriate. If sending information
directly to the manager of the certification office, send it to the
attention of the person identified in Related Information or email:
<a href="/cdn-cgi/l/email-protection#675e4a2631344a262e354a5054574a262a28242701060649000811"><span class="__cf_email__" data-cfemail="f1c8dcb0a7a2dcb0b8a3dcc6c2c1dcb0bcbeb2b1979090df969e87">[email protected]</span></a>.
(2) Before using any approved AMOC, notify your appropriate
principal inspector, or lacking a principal inspector, the manager
of the local flight standards district office/certificate holding
district office.
(i) Related Information
(1) For more information about this AD contact Mike Kiesov,
Aviation Safety Engineer, General Aviation & Rotorcraft Section,
International Validation Branch, FAA, 901 Locust, Room 301, Kansas
City, MO 64106; phone: (816) 329-4144; fax: (816) 329-4090; email:
<a href="/cdn-cgi/l/email-protection#cda0a4a6a8e3a6a4a8bea2bb8dabacace3aaa2bb"><span class="__cf_email__" data-cfemail="cda0a4a6a8e3a6a4a8bea2bb8dabacace3aaa2bb">[email protected]</span></a>.
(2) Refer to Civil Aviation Authority (CAA) of New Zealand AD
No. DCA/750XL/36, dated February 7, 2019, for more information. You
may examine the CAA AD in the AD docket at <a href="https://www.regulations.gov">https://www.regulations.gov</a> by searching for and locating Docket No. FAA-
2021-0578.
(3) For service information identified in this AD, contact the
Civil Aviation Authority of New Zealand, Level 15, Asteron Centre,
55 Featherston Street, Wellington 6011; phone: +64 4 560 9400; fax:
+64 4 569 202; email: <a href="/cdn-cgi/l/email-protection#f0999e969fb0939191de979f8684de9e8a"><span class="__cf_email__" data-cfemail="30595e565f705351511e575f46441e5e4a">[email protected]</span></a>. You may review this
referenced service information at the FAA, Airworthiness Products
Section, Operational Safety Branch, 901 Locust, Kansas City, MO
64106. For information on the availability of this material at the
FAA, call (816) 329-4148.
Issued on July 15, 2021.
Lance T. Gant,
Director, Compliance & Airworthiness Division, Aircraft Certification
Service.
[FR Doc. 2021-15474 Filed 7-21-21; 8:45 am]
BILLING CODE 4910-13-P
</pre><script data-cfasync="false" src="/cdn-cgi/scripts/5c5dd728/cloudflare-static/email-decode.min.js"></script></body>
</html>Indexed from Federal Register on July 22, 2021.
This is legal information, not legal advice. Laws vary by jurisdiction and change frequently. Always verify current law with official sources and consult a licensed attorney in your jurisdiction for advice on your specific situation.