Rule2021-14925
Airworthiness Directives; Airbus Helicopters Deutschland GmbH Helicopters
Primary source
Metadata and text below are from the Federal Register, a public-domain U.S. government work. Always verify the official published version before relying on it for any legal matter.
Published
July 14, 2021
Effective
August 18, 2021
Issuing agencies
Transportation DepartmentFederal Aviation Administration
Abstract
The FAA is adopting a new airworthiness directive (AD) for all Airbus Helicopters Deutschland GmbH Model MBB-BK 117 A-1, MBB-BK 117 A- 3, MBB-BK 117 A-4, MBB-BK 117 B-1, MBB-BK 117 B-2, and MBB-BK 117 C-1 helicopters. This AD was prompted by a report of sudden severe vibrations and a cracked open blade trailing edge caused by a loosened lead inner weight. This AD requires inspections to determine if any bolted main rotor blades are installed, and replacement of the affected main rotor blades. The FAA is issuing this AD to address the unsafe condition on these products.
Full Text
<html>
<head>
<title>Federal Register, Volume 86 Issue 132 (Wednesday, July 14, 2021)</title>
</head>
<body><pre>
[Federal Register Volume 86, Number 132 (Wednesday, July 14, 2021)]
[Rules and Regulations]
[Pages 37017-37019]
From the Federal Register Online via the Government Publishing Office [<a href="http://www.gpo.gov">www.gpo.gov</a>]
[FR Doc No: 2021-14925]
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. FAA-2021-0335; Project Identifier MCAI-2020-01665-R;
Amendment 39-21632; AD 2021-14-05]
RIN 2120-AA64
Airworthiness Directives; Airbus Helicopters Deutschland GmbH
Helicopters
AGENCY: Federal Aviation Administration (FAA), DOT.
ACTION: Final rule.
-----------------------------------------------------------------------
SUMMARY: The FAA is adopting a new airworthiness directive (AD) for all
Airbus Helicopters Deutschland GmbH Model MBB-BK 117 A-1, MBB-BK 117 A-
3, MBB-BK 117 A-4, MBB-BK 117 B-1, MBB-BK 117 B-2, and MBB-BK 117 C-1
helicopters. This AD was prompted by a report of sudden severe
vibrations and a cracked open blade trailing edge caused by a loosened
lead inner weight. This AD requires inspections to determine if any
bolted main rotor blades are installed, and replacement of the affected
main rotor blades. The FAA is issuing this AD to address the unsafe
condition on these products.
DATES: This AD is effective August 18, 2021.
The Director of the Federal Register approved the incorporation by
reference of a certain document listed in this AD as of August 18,
2021.
ADDRESSES: For service information identified in this final rule,
contact Airbus Helicopters, 2701 N Forum Drive, Grand Prairie, TX
75052; phone: 972-641-0000 or 800-232-0323; fax: 972-641-3775; or at
<a href="https://www.airbus.com/helicopters/services/-support.html">https://www.airbus.com/helicopters/services/-support.html</a>. You may view
the referenced service information at the FAA, Office of the Regional
Counsel, Southwest Region, 10101 Hillwood Pkwy., Room 6N-321, Fort
Worth, TX 76177. Service information that is incorporated by reference
is also available at <a href="https://www.regulations.gov">https://www.regulations.gov</a> by searching for and
locating Docket No. FAA-2021-0335.
Examining the AD Docket
You may examine the AD docket at <a href="https://www.regulations.gov">https://www.regulations.gov</a> by
searching for and locating Docket No. FAA-2021-0335; or in person at
Docket Operations between 9 a.m. and 5 p.m., Monday through Friday,
except Federal holidays. The AD docket contains this final rule, the
Luftfahrt-Bundesamt AD, any comments received, and other information.
The street address for Docket Operations is U.S. Department of
Transportation, Docket Operations, M-30, West Building Ground Floor,
Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590.
FOR FURTHER INFORMATION CONTACT: Kathleen Arrigotti, Aerospace
Engineer, Large Aircraft Section, International Validation Branch, FAA,
2200 South 216th St., Des Moines, WA 98198; phone and fax: 206-231-
3218; email: <a href="/cdn-cgi/l/email-protection#bcd7ddc8d4d0d9d9d292ddceced5dbd3c8c8d5fcdadddd92dbd3ca"><span class="__cf_email__" data-cfemail="167d77627e7a737378387764647f717962627f5670777738717960">[email protected]</span></a>.
SUPPLEMENTARY INFORMATION:
Background
The FAA issued a notice of proposed rulemaking (NPRM) to amend 14
CFR part 39 by adding an AD that would apply to all Airbus Helicopters
Deutschland GmbH Model MBB-BK 117 A-1, MBB-BK 117 A-3, MBB-BK 117 A-4,
MBB-BK 117 B-1, MBB-BK 117 B-2, and MBB-BK 117 C-1 helicopters. The
NPRM published in the Federal Register on April 26, 2021 (86 FR 21965).
In the NPRM, the FAA proposed to require inspections to determine if
any bolted main rotor blades are installed, and replacement of the
affected main rotor blades. The NPRM was prompted by a report of sudden
severe vibrations and a cracked open blade trailing edge caused by a
loosened lead inner weight.
German AD D-2005-115, effective March 15, 2005 (German AD D-2005-
115), issued by Luftfahrt-Bundesamt, which is the aviation authority
for Germany, was issued to correct an unsafe condition for Eurocopter
Deutschland (now Airbus Helicopters Deutschland GmbH) Model MBB-BK 117
A-1, MBB-BK 117 A-3, MBB-BK 117 A-4, MBB-BK 117 B-1, MBB-BK 117 B-2,
and MBB-BK 117 C-1 helicopters. Luftfahrt-Bundesamt advises that during
the flight of a BK117 severe vibrations suddenly occurred, stemming
from a cracked open blade trailing edge, which was traced to a loosened
lead inner weight bolt. Additional inspection revealed extreme cavities
of the lead weight resulting from the bolting process, which was
performed as a repair for main rotor blades with bulging in the area of
the lead inner weights. This condition, if not addressed, could result
in loss of control of the helicopter.
Accordingly, German AD D-2005-115 requires an inspection and log
card review to determine if any bolted main rotor blades are installed,
and replacement of the affected main rotor blades.
Discussion of Final Airworthiness Directive
Comments
The FAA received no comments on the NPRM or on the determination of
the costs.
Conclusion
These helicopters have been approved by the aviation authority of
Germany and are approved for operation in the United States. Pursuant
to the FAA's bilateral agreement with Germany (now a member of the
European Union), Luftfahrt-Bundesamt, its technical representative, has
notified the FAA of the unsafe condition described in its AD. The FAA
reviewed the relevant data and determined that air safety requires
adopting this AD as proposed. Accordingly, the FAA is issuing this AD
to address the unsafe condition on these helicopters. Except for minor
editorial changes, this AD is adopted as proposed in the NPRM.
Related Service Information Under 1 CFR Part 51
The FAA reviewed Eurocopter Alert Service Bulletin No. ASB-MBB-
BK117-10-125, dated February 14, 2005. This service information
specifies procedures for an inspection (for cracking of the paint) and
log card review (for a certain entry or equivalent) to determine if any
bolted main rotor blades (i.e., main rotor blades with bolted lead
inner weights) are installed, and replacement of the affected main
rotor blades.
This service information is reasonably available because the
interested parties have access to it through their normal course of
business or by the means identified in the ADDRESSES section.
Costs of Compliance
The FAA estimates that this AD affects 44 helicopters of U.S.
Registry. Labor rates are estimated at $85 per work-hour. Based on
these numbers, the FAA estimates the following costs to comply with
this AD.
[[Page 37018]]
Estimated Costs for Required Actions
----------------------------------------------------------------------------------------------------------------
Cost per Cost on U.S.
Labor cost Parts cost product operators
----------------------------------------------------------------------------------------------------------------
3 work-hours x $85 per hour = $255........................... $0 $255 $11,220
----------------------------------------------------------------------------------------------------------------
The FAA estimates the following costs to do any necessary on-
condition replacements that would be required based on the results of
any required actions. The FAA has no way of determining the number of
helicopters that might need these on-condition replacements:
Estimated Costs of On-Condition Actions
------------------------------------------------------------------------
Labor cost Parts cost Cost per product
------------------------------------------------------------------------
Up to 20 work-hours x $85 per Up to $23,100 per Up to $24,800 per
hour = $1,700 per blade (up to blade (up to 4 blade (up to 4
4 blades). blades). blades).
------------------------------------------------------------------------
Authority for This Rulemaking
Title 49 of the United States Code specifies the FAA's authority to
issue rules on aviation safety. Subtitle I, section 106, describes the
authority of the FAA Administrator. Subtitle VII: Aviation Programs,
describes in more detail the scope of the Agency's authority.
The FAA is issuing this rulemaking under the authority described in
Subtitle VII, Part A, Subpart III, Section 44701: General requirements.
Under that section, Congress charges the FAA with promoting safe flight
of civil aircraft in air commerce by prescribing regulations for
practices, methods, and procedures the Administrator finds necessary
for safety in air commerce. This regulation is within the scope of that
authority because it addresses an unsafe condition that is likely to
exist or develop on helicopters identified in this rulemaking action.
Regulatory Findings
This AD will not have federalism implications under Executive Order
13132. This AD will not have a substantial direct effect on the States,
on the relationship between the national government and the States, or
on the distribution of power and responsibilities among the various
levels of government.
For the reasons discussed above, I certify that this AD:
(1) Is not a ``significant regulatory action'' under Executive
Order 12866,
(2) Will not affect intrastate aviation in Alaska, and
(3) Will not have a significant economic impact, positive or
negative, on a substantial number of small entities under the criteria
of the Regulatory Flexibility Act.
List of Subjects in 14 CFR Part 39
Air transportation, Aircraft, Aviation safety, Incorporation by
reference, Safety.
The Amendment
Accordingly, under the authority delegated to me by the
Administrator, the FAA amends 14 CFR part 39 as follows:
PART 39--AIRWORTHINESS DIRECTIVES
0
1. The authority citation for part 39 continues to read as follows:
Authority: 49 U.S.C. 106(g), 40113, 44701.
Sec. 39.13 [Amended]
0
2. The FAA amends Sec. 39.13 by adding the following new airworthiness
directive:
2021-14-05 Airbus Helicopters Deutschland GmbH: Amendment 39-21632;
Docket No. FAA-2021-0335; Project Identifier MCAI-2020-01665-R.
(a) Effective Date
This airworthiness directive (AD) is effective August 18, 2021.
(b) Affected ADs
None.
(c) Applicability
This AD applies to all Airbus Helicopters Deutschland GmbH Model
MBB-BK 117 A-1, MBB-BK 117 A-3, MBB-BK 117 A-4, MBB-BK 117 B-1, MBB-
BK 117 B-2, and MBB-BK 117 C-1 helicopters, certificated in any
category.
(d) Subject
Joint Aircraft Service Component (JASC) Code: 6210, Main Rotor
Blades.
(e) Unsafe Condition
This AD was prompted by a report of sudden severe vibrations and
a cracked open blade trailing edge caused by a loosened lead inner
weight. The FAA is issuing this AD to address bolted lead inner
weights of the main rotor blade, which could loosen and cause
cracking of the open blade trailing edge. The unsafe condition, if
not addressed, could result in loss of control of the helicopter.
(f) Compliance
Comply with this AD within the compliance times specified,
unless already done.
(g) Required Actions
Within 30 days after the effective date of this AD, review the
log card (or equivalent record) and visually inspect each main rotor
blade to determine if any bolted main rotor blades (i.e., main rotor
blade with bolted lead inner weight) are installed in accordance
with paragraphs 2.A.1., 2.B.1., 2.B.2., and 2.B.3. of the
Accomplishment Instructions of Eurocopter Alert Service Bulletin No.
ASB-MBB-BK117-10-125, dated February 14, 2005. If during the review,
the total hours time-in-service (TIS) cannot be positively
determined, this AD requires treating that part as having
accumulated more than 3,000 total hours TIS. If any bolted main
rotor blade (i.e., main rotor blade with bolted lead inner weight)
is installed, replace the main rotor blade in accordance with
paragraph 2.B.4. of the Accomplishment Instructions of Eurocopter
Alert Service Bulletin ASB-MBB-BK117-10-125, dated February 14,
2005, as follows:
(1) For a bolted main rotor blade that has accumulated less than
2,300 total hours TIS on the blade since bolting of the lead inner
weight as of the effective date of this AD: Before accumulating
2,500 total hours TIS on the blade since bolting of the lead inner
weights.
(2) For a bolted main rotor blade that has accumulated 2,300
total hours TIS up to 3,000 total hours TIS inclusive, on the blade
since bolting of the lead inner weight as of the effective date of
this AD: Within 200 hours TIS after the effective date of this AD.
(3) For a bolted main rotor blade that has accumulated more than
3,000 total hours TIS on the blade since bolting of the lead inner
weight as of the effective date of this AD: Within 50 hours TIS
after the effective date of this AD.
[[Page 37019]]
(h) Contacting the Manufacturer To Determine TIS
Where Eurocopter Alert Service Bulletin ASB-MBB-BK117-10-125,
dated February 14, 2005, specifies to send a form to the
manufacturer to determine TIS since bolting, this AD does not
include that requirement.
(i) Alternative Methods of Compliance (AMOCs)
(1) The Manager, International Validation Branch, FAA, has the
authority to approve AMOCs for this AD, if requested using the
procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19,
send your request to your principal inspector or local Flight
Standards District Office, as appropriate. If sending information
directly to the manager of the International Validation Branch, send
it to the attention of the person identified in paragraph (j)(1) of
this AD. Information may be emailed to: <a href="/cdn-cgi/l/email-protection#162f3b5740453b575f443b2125263b575b59555670777738717960"><span class="__cf_email__" data-cfemail="97aebad6c1c4bad6dec5baa0a4a7bad6dad8d4d7f1f6f6b9f0f8e1">[email protected]</span></a>.
(2) Before using any approved AMOC, notify your appropriate
principal inspector, or lacking a principal inspector, the manager
of the local flight standards district office/certificate holding
district office.
(j) Related Information
(1) For more information about this AD, contact Kathleen
Arrigotti, Aerospace Engineer, Large Aircraft Section, International
Validation Branch, FAA, 2200 South 216th St., Des Moines, WA 98198;
phone and fax: 206-231-3218; email: <a href="/cdn-cgi/l/email-protection#a7ccc6d3cfcbc2c2c989c6d5d5cec0c8d3d3cee7c1c6c689c0c8d1"><span class="__cf_email__" data-cfemail="066d67726e6a636368286774746f616972726f4660676728616970">[email protected]</span></a>.
(2) The subject of this AD is addressed in Luftfahrt-Bundesamt
German AD D-2005-115, effective March 15, 2005. You may view the
Luftfahrt-Bundesamt German AD at <a href="https://www.regulations.gov">https://www.regulations.gov</a> in
Docket No. FAA-2021-0335.
(k) Material Incorporated by Reference
(1) The Director of the Federal Register approved the
incorporation by reference of the service information listed in this
paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.
(2) You must use this service information as applicable to do
the actions required by this AD, unless the AD specifies otherwise.
(i) Eurocopter Alert Service Bulletin No. ASB-MBB-BK117-10-125,
dated February 14, 2005.
(ii) [Reserved]
(3) For service information identified in this AD, contact
Airbus Helicopters, 2701 N Forum Drive, Grand Prairie, TX 75052;
phone: 972-641-0000 or 800-232-0323; fax: 972-641-3775; or at
<a href="https://www.airbus.com/helicopters/services/-support.html">https://www.airbus.com/helicopters/services/-support.html</a>.
(4) You may view this service information at the FAA, Office of
the Regional Counsel, Southwest Region, 10101 Hillwood Pkwy., Room
6N-321, Fort Worth, TX 76177. For information on the availability of
this material at the FAA, call (817) 222-5110.
(5) You may view this service information that is incorporated
by reference at the National Archives and Records Administration
(NARA). For information on the availability of this material at
NARA, email: <a href="/cdn-cgi/l/email-protection#a4c2c1c0d6c1c38ac8c1c3c5c8e4cac5d6c58ac3cbd2"><span class="__cf_email__" data-cfemail="452320213720226b2920222429052b2437246b222a33">[email protected]</span></a>, or go to: <a href="https://www.archives.gov/federal-register/cfr/ibr-locations.html">https://www.archives.gov/federal-register/cfr/ibr-locations.html</a>.
Issued on July 8, 2021.
Gaetano A. Sciortino,
Deputy Director for Strategic Initiatives, Compliance & Airworthiness
Division, Aircraft Certification Service.
[FR Doc. 2021-14925 Filed 7-13-21; 8:45 am]
BILLING CODE 4910-13-P
</pre><script data-cfasync="false" src="/cdn-cgi/scripts/5c5dd728/cloudflare-static/email-decode.min.js"></script></body>
</html>Indexed from Federal Register on July 14, 2021.
This is legal information, not legal advice. Laws vary by jurisdiction and change frequently. Always verify current law with official sources and consult a licensed attorney in your jurisdiction for advice on your specific situation.