Notice2021-14819
Thyssenkrupp Access Corp.
Primary source
Metadata and text below are from the Federal Register, a public-domain U.S. government work. Always verify the official published version before relying on it for any legal matter.
Published
July 13, 2021
Issuing agencies
Consumer Product Safety Commission
Abstract
Under provisions of its Rules of Practice for Adjudicative Proceeding, the Consumer Product Safety Commission must publish in the Federal Register Complaints which it issues. Published below is a Complaint: In the matter of Thyssenkrupp Access Corp.
Full Text
<html>
<head>
<title>Federal Register, Volume 86 Issue 131 (Tuesday, July 13, 2021)</title>
</head>
<body><pre>
[Federal Register Volume 86, Number 131 (Tuesday, July 13, 2021)]
[Notices]
[Pages 36711-36715]
From the Federal Register Online via the Government Publishing Office [<a href="http://www.gpo.gov">www.gpo.gov</a>]
[FR Doc No: 2021-14819]
=======================================================================
-----------------------------------------------------------------------
CONSUMER PRODUCT SAFETY COMMISSION
[CPSC Docket No. 21-1]
Thyssenkrupp Access Corp.
AGENCY: Consumer Product Safety Commission.
ACTION: Publication of a Complaint under the Consumer Product Safety
Act.
-----------------------------------------------------------------------
SUMMARY: Under provisions of its Rules of Practice for Adjudicative
Proceeding, the Consumer Product Safety Commission must publish in the
Federal Register Complaints which it issues. Published below is a
Complaint: In the matter of Thyssenkrupp Access Corp.
FOR FURTHER INFORMATION CONTACT: Alberta E. Mills, Secretary, Division
of the Secretariat, Office of the General Counsel, U.S. Consumer
Product Safety Commission, 4330 East-West Highway, Bethesda, MD 20814,
(301) 504-7479 (Office) or 240-863-8938 (cell).
SUPPLEMENTARY INFORMATION: The Commission voted 3-1 to authorize
issuance of this Complaint. Acting Chairman Adler, Commissioners Kaye
and Feldman voted to authorize issuance of the Complaint. Commissioner
Baiocco voted to not authorize issuance of the Complaint. The text of
the Complaint appears below.
Dated: July 8, 2021.
Alberta E. Mills,
Secretary, Consumer Product Safety Commission.
United States of America
Consumer Product Safety Commission
In the Matter of Thyssenkrupp Access Corp., Respondent.
CPSC Docket No.: 21-1
Complaint
Nature of the Proceedings
1. This is an administrative enforcement proceeding pursuant to
Section 15 of the Consumer Product Safety Act (``CPSA''), as amended,
15 U.S.C. 2064, for public notification and remedial action to protect
the public from the substantial risks of injury presented by various
models of residential elevators (``Elevators''), which were
manufactured and distributed by Thyssenkrupp Access Corp.
(``Respondent'').
2. This proceeding is governed by the Rules of Practice for
Adjudicative Proceedings before the Consumer Product Safety Commission
(the ``Commission''), 16 CFR part 1025.
Jurisdiction
3. This proceeding is instituted pursuant to the authority
contained in Sections 15(c), (d), and (f) of the CPSA, 15 U.S.C.
2064(c), (d), and (f).
Parties
4. Complaint Counsel consists of attorneys in the Division of
Enforcement and Litigation within the Office of Compliance and Field
Operations representing the staff of the Commission. 16 CFR 1025.3(d).
The Commission is an independent federal regulatory agency established
pursuant to Section 4 of the CPSA, 15 U.S.C. 2053.
5. Respondent is a Missouri corporation with its principal place of
business located at P.O. Box 545, Clinton, Missouri 64735.
6. Upon information and belief, Respondent acquired Access
Industries, Inc., a manufacturer of some of the Elevators, in or about
1999.
7. Upon information and belief, Respondent acquired National Wheel-
O-Vator Company, Inc., a manufacturer of some of the Elevators, in or
about 2008.
8. On or about January 31, 2013, ThyssenKrupp Access Manufacturing,
LLC, a manufacturer of some of the Elevators, was merged into
Respondent, with Respondent being the surviving entity.
9. Upon information and belief, Respondent is a ``manufacturer''
and ``distributor'' of a ``consumer product'' that is ``distribute[d]
in commerce,'' as those terms are defined in Sections 3(a)(5), (7),
(8), and (11) of the CPSA, 15 U.S.C. 2052(a)(5), (7), (8), and (11).
The Elevators
10. The Elevators are various models of residential elevators that
were manufactured and/or distributed in U.S. commerce and offered for
sale to consumers for their personal use in or around a permanent or
temporary household or residence, school, in recreation or otherwise.
11. Upon information and belief, the Elevators include, but are not
limited to, the following models: Chaparral, Destiny, LEV, LEV II, LEV
II Builder, Rise, Volant, Windsor, Independence, and Flexi-Lift.
12. Upon information and belief, the Elevators were manufactured
and distributed by Access Industries, Inc., formerly of Missouri;
ThyssenKrupp Access Manufacturing, LLC and National Wheel-O-Vator
Company, Inc., both formerly of Roanoke, Illinois; and by Respondent.
13. Upon information and belief, at least 16,872 Elevators were
[[Page 36712]]
manufactured and distributed in U.S. commerce from 1996 through 2012.
14. Upon information and belief, an undetermined number of
Elevators were manufactured and distributed in U.S. commerce through
2012.
15. Upon information and belief, most, if not all, of the Elevators
were installed by third parties based upon guidance and instructions
contained in materials provided by Respondent.
16. These materials include engineering drawings and instructional
materials, including installation, design, and planning guides
(collectively herein, ``Installation Materials.'').
17. Upon information and belief, the estimated price for a two-
landing installation of the Elevators was between $15,000 to $25,000.
18. The Elevators have a passenger car that moves between the
floors in an elevator shaft, or ``hoistway.''
19. Access to an Elevator is restricted at each floor by a hoistway
door, which often looks like a typical door installed in a consumer's
residence.
20. Upon information and belief, when the Elevator is parked at a
floor, the hoistway door is not locked from the exterior.
21. The Elevators also contain an interior door, the elevator car
door, which is usually an accordion door or a scissor gate.
22. By design, accordion doors have v-shaped peaks and valleys that
allow the door to collapse on one side of the car door and allow
passengers to enter and exit the elevator.
23. This design leads to the creation of additional inches of space
between the peak, which is closest to the hoistway door, and the
valley, which is furthest away from the hoistway door.
24. Scissor gates are designed with metal grates and also collapse
to the side of the car door to allow passengers to enter and exit the
elevator.
25. Both accordion doors and scissor gates allow for deflection if
pressure is exerted on the elevator car door.
26. Deflection creates additional space between the elevator car
door and the hoistway door.
27. Upon information and belief, children 2-years-old and older can
fit in the space between a hoistway and elevator car door if the space
is greater than 4 inches.
28. The Elevators are commonly installed in homes, vacation
rentals, and other premises where children are present.
The Entrapment Hazard Created by the Elevators
29. Children are likely to use an Elevator.
30. Children are likely to play in or around an Elevator.
31. Children can fit and become entrapped in the space between the
hoistway door and the elevator car door when the space is greater than
4 inches (``Hazardous Space'').
32. Parents or caregivers are not likely to appreciate the danger
posed by a Hazardous Space between the hoistway door and elevator car
door.
33. When the elevator is not operating, children can open the
unlocked hoistway door, step into the Hazardous Space between the
hoistway door and elevator car door, and close the hoistway door behind
them.
34. Hoistway doors are designed with interlock devices, which
automatically lock when the Elevator is in operation.
35. If a child is in the Hazardous Space between the hoistway and
elevator car doors, and the elevator is called to another floor, the
hoistway door locks, trapping the child.
36. In such a situation, a child cannot escape because the hoistway
door is locked.
37. In such a situation, a parent or caregiver will likely be
unable to open the hoistway door to free the child while the elevator
is in operation.
38. A child entrapped in the Hazardous Space between the hoistway
door and the passenger car door when an elevator is in operation can
suffer serious injury or death.
39. Upon information and belief, children as young as 2 and as old
as 16 have become entrapped in the Hazardous Space between the hoistway
door and the elevator car door.
The Elevator Defects
40. The Elevators are defective because they contain defects in the
``contents, construction, finish, packaging, warnings, and/or
instructions,'' specifically through Respondent's Installation
Materials, and the Elevators contain design defects. See 16 CFR 1115.4.
41. The Installation Materials are defective because they direct,
cause, or fail to adequately prevent installation of the Elevators in a
manner that creates a Hazardous Space greater than 4 inches between the
hoistway door and the elevator car door.
42. The head breadths of some children can be less than 5 inches.
43. Upon information and belief, because of these dimensions,
children can fit in, and become entrapped between, the hoistway and
elevator car doors.
44. Certain Installation Materials are defective because they do
not contain specific instructions on how to measure the space between
the hoistway door and elevator car door based on the elevator car door
type (accordion or scissor).
45. Measuring to the valley versus the peak of an accordion
elevator door can result in significant space variances, creating
spaces much larger than 4 inches.
46. Installers using Installation Materials that do not specify how
to measure are more likely to install the Elevators with a Hazardous
Space because they are unlikely to appreciate the importance of
minimizing the space between the hoistway door and elevator car door by
measuring to the valley of the accordion door.
47. The Installation Materials that do contain specific
instructions on how to measure the space do so in a manner that will
create a Hazardous Space of greater than 4 inches.
48. Specifically, some of the Installation Materials affirmatively
direct installers to measure the distance to the elevator car itself,
the lead post of the car door, or the peak of the accordion door; all
points that are inches closer to the hoistway door than the valley of
the accordion door.
49. Thus, such direction makes it highly likely that installers
will fail to measure to the valley of an accordion door--all but
ensuring installation with a Hazardous Space of greater than 4 inches.
50. The Installation Materials also are defective because they fail
to state that these measurements are safety-critical and they fail to
expressly warn about the entrapment hazard posed by the Hazardous
Space.
51. The Installation Materials contain many fine print
measurements; failure to identify the particular measurements as a
critical safety element or identify the hazard means it is less likely
that there will be strict adherence to these measurements, which may
lead to the creation of a Hazardous Space.
52. The Installation Materials also are defective because they do
not require the use of, or provide, a measurement tool.
53. Failure to require the use of or to provide a measurement tool
to ensure precise measurements between the hoistway door and the
elevator car door may lead to the creation of a Hazardous Space because
installers may measure in a way to create such a space.
54. This is especially problematic when installing accordion doors,
because of the additional space that can be created when measuring to
the peaks of the doors and not the valleys.
55. Thus, failure to require the use of or provide a measuring tool
may lead to
[[Page 36713]]
installations where installers create a Hazardous Space by measuring to
a part of the car door that would not minimize the space.
56. The Installation Materials also are defective because they fail
to contain an elevator car door rigidity requirement to account for
deflection of the elevator car door when minimal force is applied.
57. Deflection allows for the creation of an even larger Hazardous
Space between the hoistway and elevator car doors.
58. The larger space created by deflection allows older and larger
children to push against the elevator car door and become entrapped in
the Hazardous Space.
59. The Elevators also are defective because they fail to provide
and require use of available safety features to mitigate against the
hazard.
60. Upon information and belief, Respondent sold safety features to
consumers as optional items.
61. Upon information and belief, none of the Elevators come with a
required safety feature that prevents a child from becoming entrapped
in the Hazardous Space when the Elevator is called to another floor.
62. The design of the Elevators allows the Elevators to move from
floor to floor when a child is entrapped in the Hazardous Space,
putting the child at risk of serious injury or death.
63. Upon information and belief, none of the Elevators come with a
required safety feature that would prevent the Elevator from moving
from floor to floor if a child is entrapped in the Hazardous Space.
64. Upon information and belief, the potential for a Hazardous
Space to exist between the hoistway door and elevator car door is
present on all Elevator models manufactured and distributed by
Respondent.
65. Upon information and belief, the potential for the Elevators to
operate and move from floor to floor even if a child is entrapped in
the Hazardous Space is present on all Elevator models manufactured and
distributed by Respondent.
Incidents Caused by the Defective Elevators
66. The defects associated with the Elevators have led to three
incidents, including the death of one child and serious and permanent
injuries to another.
67. Upon information and belief, on or about December 24, 2010, a
3-year-old boy became entrapped in the Hazardous Space between the
doors of a Destiny model elevator.
68. The elevator car door was an accordion door.
69. Upon information and belief, the child suffered a catastrophic
brain injury when the Elevator moved between floors, and as a result,
is permanently disabled.
70. The child will require constant care for the remainder of his
life.
71. The Elevator was manufactured on or about September 28, 2007.
72. Upon information and belief, there were between 4.875 inches
and 5 inches from the hoistway door to the peak of the accordion door,
and 7.5 inches from the hoistway door to the valley of the accordion
door.
73. Respondent's Installation Materials for this specific Elevator
installation instructed the installer to measure 5 inches from the
hoistway door to the ``outside'' or peak of the accordion gate.
74. Upon information and belief, on or about February 1, 2017, a 2-
year-old boy died when he became entrapped in the Hazardous Space
between the hoistway and accordion door of an LEV Elevator that was
moving between floors.
75. Upon information and belief, the Elevator was manufactured on
or about January 6, 2010.
76. Upon information and belief, on or about November 28, 2019, a
4-year-old child was entrapped in the Hazardous Space between the
hoistway and accordion door of a Destiny Elevator.
77. Upon information and belief, while in the Hazardous Space, the
child fell to the basement and was pinned by the Elevator.
78. This Elevator was manufactured on or about May 4, 2000.
79. Upon information and belief, the space between the hoistway
door and the elevator car sill was approximately 5 inches.
80. Upon information and belief, this child was deprived of oxygen
for some period of time, was hospitalized as a result of the incident,
and was later released.
Respondent's Knowledge of the Defects and the Hazard
81. Upon information and belief, Respondent knew of the deadly
dangers of the Hazardous Space when it manufactured and distributed the
Elevators.
82. Upon information and belief, on or about July 31, 2003,
National Wheel-O-Vator Company, Inc. received an ``Important Elevator
Safety Information Bulletin'' from the Otis Elevator Company.
83. Upon information and belief, this letter and a safety brochure
that accompanied the letter, highlighted the importance of reducing the
Hazardous Space by using space guards, which are safety devices that
can be installed on the back of each hoistway door to eliminate some of
the Hazardous Space.
84. The letter from Otis Elevator Company stated that, with space
guards installed, ``the likelihood of an entrapment between the door
and gate and of serious injury or death is greatly reduced.''
85. Upon information and belief, by 2006, members of the American
Society for Mechanical Engineers A17 Residence Elevator Committee (the
``Committee'') publicly raised concerns regarding risks posed by the 5-
inch space requirement between the hoistway door and the elevator car
door found in the ASME A17.1 Safety Code for Elevators and Escalators.
86. Upon information and belief, various representatives for
Respondent and National Wheel-O-Vator Company, Inc. participated in the
Committee, including the task group manager for this issue, the vice
chairman of the committee, and several other employees.
87. Upon information and belief, some Committee members noted that
5 inches between an elevator door and hoistway door could present an
entrapment hazard.
88. Upon information and belief, the Committee also discussed the
potential for measuring discrepancies between peaks and valleys of
accordion doors.
89. Upon information and belief, the Committee also discussed the
ability for accordion doors to be significantly more flexible due to
deflection.
90. Upon information and belief, Respondent nevertheless made no
changes to the Elevators or any Installation Materials.
91. Upon information and belief, in or about 2014, Respondent
launched an information campaign, known as homeSAFE (Safety Awareness
For Elevators).
92. Upon information and belief, as part of the homeSAFE campaign,
Respondent offered space guards to consumers.
93. Upon information and belief, consumers were required to pay for
75% of the cost of each space guard.
94. Upon information and belief, purchasing space guards for
multiple landings would cost consumers hundreds of dollars.
95. Upon information and belief, Respondent distributed
approximately 422 total space guards.
96. As part of the homeSAFE campaign, on or about June 24, 2014,
Respondent began recommending that
[[Page 36714]]
``to help prevent child entrapments, make sure the space between the
hoistway door and the cab gate is no more than four inches . . . [and]
taking measurements from the hoistway door to the back or rear post of
the car gate.''
97. Upon information and belief, by the time that the homeSAFE
campaign was launched, most, if not all, of Respondent's Elevators
would have already been installed with the defective Installation
Materials that allowed for a Hazardous Space greater than 4 inches and
did not recommend a precise measurement to the valley of the accordion
door.
98. Upon information and belief, in or about 2018, Respondent
stopped supporting the homeSAFE website.
99. Despite knowing for many years about the potential hazards
associated with its Elevators, Respondent took no action to correct
defects in its Installation Materials or its Elevators.
100. Because of Respondent's inaction, two children were involved
in incidents with Elevators manufactured after 2006; one child became
permanently disabled in December 2010 and one child died in February
2017.
101. Further, two of the reported incidents occurred during or
after Respondent's homeSAFE campaign; the death of a child in February
2017 and the hospitalization of a child in November 2019.
The Substantial Risk of Injury Posed by the Elevators
102. Upon information and belief, children, a vulnerable
population, have sustained grievous bodily injuries and death after
becoming entrapped in the Hazardous Space between the hoistway door and
the elevator car door on Respondent's Elevators.
103. Upon information and belief, children are likely to interact
with and playfully explore the Elevators, and it is foreseeable that
children could become entrapped between the hoistway and elevator car
doors.
104. Parents and caregivers are not likely to know about or
appreciate the safety hazard to children posed by the Hazardous Space
between the hoistway and elevator car doors.
105. Once a child enters the Hazardous Space and the elevator is
called to another floor, the child cannot escape.
106. If a child is in that Hazardous Space when the elevator is
called to another floor, the child is at risk of crushing injuries that
can prove fatal or permanently debilitating, such as massive head
trauma, compression of the torso, broken bones, and other grievous
bodily injuries.
107. Children can also suffer long term complications from being
crushed or dragged by an Elevator.
108. A child in the Hazardous Space when the elevator is called to
another floor is also at risk of falling into the elevator shaft and
suffering serious or fatal injuries.
109. Upon information and belief, at least three children have
become entrapped in the Hazardous Space due to the defects associated
with the Elevators.
110. The defects present in the Elevators create a substantial risk
of injury to children who are entrapped in the hazardous space between
the hoistway and elevator car doors when the elevator is called to
another floor.
111. Death, grievous bodily injuries, and serious injuries, as
defined in 16 CFR 1115.6(c) and Sec. 1115.12(d), are likely to occur
and have occurred when children become entrapped in the Hazardous Space
and the Elevator is called to another floor.
Legal Authority Under the CPSA
112. Under the CPSA, the Commission may order a firm to provide
notice to the public and take remedial action if the Commission
determines that a product ``presents a substantial product hazard.'' 15
U.S.C. 2064(c) and (d).
113. Under CPSA Section 15(a)(2), a ``substantial product hazard''
is ``a product defect which (because of the pattern of defect, the
number of defective products distributed in commerce, the severity of
the risk, or otherwise) creates a substantial risk of injury to the
public.'' 15 U.S.C. 2064(a)(2).
114. A product may contain a design defect even if it is
manufactured exactly in accordance with its design and specifications
if the design presents a risk of injury to the public. 16 CFR 1115.4.
115. A defect can also occur in a product's contents, construction,
finish, packaging, warnings, and/or instructions.
116. A consumer product may contain a defect if the instructions
for assembly or use could allow the product, otherwise safely designed
and manufactured, to present a risk of injury. 16 CFR 1115.4.
Count I
The Elevators Are a Substantial Product Hazard Because They Contain
Defects That Create a Substantial Risk of Injury to the Public
117. Paragraphs 1 through 116 are hereby realleged and incorporated
by reference as if fully set forth herein.
118. The Elevators are consumer products.
119. The Elevators contain defects because:
a. The Installation Materials direct, cause, or fail to adequately
prevent installation of the Elevators in a manner that creates a
Hazardous Space between the hoistway door and elevator car doors in
which children can become entrapped, including by failing to:
i. Contain adequate and correct instructions on how to measure the
space between the hoistway door and elevator car door to avoid creating
the Hazardous Space based on the elevator car door type;
ii. contain adequate instructions on how to avoid the creation of a
larger Hazardous Space based on the deflection of the elevator car
door;
iii. state that the measurement between the hoistway door and the
elevator car door is safety-critical or expressly warn about the
entrapment hazard; and
iv. require the use of, or provide, a measurement tool to ensure
precise measurement and avoid the creation of a Hazardous Space.
b. The design of the Elevators fails to require safety features
that prevent a child from becoming entrapped in the Hazardous Space and
that prevent the Elevator from moving between floors if a child is
entrapped in the Hazardous Space.
120. These defects separately, and in combination, create a
substantial risk of injury to the public because of the pattern of
defect, the number of defective products distributed in commerce, the
severity of the risk, or otherwise.
121. Therefore, the Elevators present a substantial product hazard
within the meaning of Section 15(a)(2) of the CPSA, 15 U.S.C.
2064(a)(2).
Relief Sought
Wherefore, in the public interest, Complaint Counsel requests that
the Commission:
A. Determine that the Elevators present a ``substantial product
hazard'' within the meaning of Section 15(a)(2) of the CPSA, 15 U.S.C.
2064(a)(2).
B. Determine that extensive and effective public notification under
Section 15(c) of the CPSA, 15 U.S.C. 2064(c), is required to adequately
protect the public from the substantial product hazard presented by the
Elevators, and order Respondent under Section 15(c) of the CPSA, 15
U.S.C. 2064(c), to:
(1) Notify all persons who distribute the Elevators, or to whom
such Elevators have been sold or distributed,
[[Page 36715]]
to immediately cease distribution of the Elevators;
(2) Notify appropriate state and local public health officials;
(3) Give prompt public notice of the defect in the Elevators,
including the incidents and injuries associated with the use of the
Elevators, including posting clear and conspicuous notice on
Respondent's website, and providing notice to any third-party website
on which Respondent has a presence, and provide further announcements
in languages other than English and on radio, television, and social
media;
(4) Mail and email notice to each distributor, retailer, dealer and
installer of the Elevators; and
(5) Mail and email notice to every person to whom the Elevators
were delivered or sold.
C. Determine that action under Section 15(d) of the CPSA, 15 U.S.C.
2064(d), is in the public interest and additionally order Respondent
to:
(1) Repair the defect in the Elevators by providing a free
inspection to consumers by a qualified inspector who will measure the
gap between the hoistway and elevator doors;
(2) Install, at no cost to consumers, a free space guard approved
by Commission staff that reduces the gap to no more than 4 inches;
(3) Make no charge to consumers, and to reimburse consumers, for
any reasonable and foreseeable expenses incurred in availing themselves
of any remedy provided under any Commission Order issued in this
matter, as provided by Section 15(e)(1) of the CPSA, 15 U.S.C.
2064(e)(1), including previous purchases of space guards or other
safety devices, and all costs associated with those purchases, whether
or not they were part of the homeSAFE campaign;
(4) Reimburse distributors, retailers, dealers, installers, and
other third parties for expenses in connection with carrying out any
Commission Order issued in this matter, including the costs of repairs
or replacements, as provided by Section 15(e)(2) of the CPSA, 15 U.S.C.
2064(e)(2);
(5) Submit a plan satisfactory to the Commission, within ten (10)
days of service of the Final Order, directing that actions specified in
Paragraphs B(1) through (5), and C(1) through (4) above be taken in a
timely manner;
(6) Submit monthly reports, to the Commission, documenting the
progress of the corrective action program;
(7) For a period of five (5) years after issuance of the Final
Order in this matter, keep records of its actions taken to comply with
Paragraphs B(1) through (5), C(1) through (4), above, and supply these
records to the Commission for the purpose of monitoring compliance with
the Final Order; and
(9) For a period of five (5) years after issuance of the Final
Order in this matter, notify the Commission at least sixty (60) days
prior to any change in its business (such as incorporation,
dissolution, assignment, sale, or petition for bankruptcy) that results
in, or is intended to result in, the emergence of a successor
corporation, going out of business, or any other change that might
affect compliance obligations under a Final Order issued by the
Commission in this matter.
D. Order that Respondent take other and further actions as the
Commission deems necessary to protect the public health and safety and
to comply with the CPSA.
Issued by Order of the Commission:
Dated this 7th day of July, 2021
-----------------------------------------------------------------------
By: Robert Kaye,
Assistant Executive Director, Office of Compliance and Field
Operations, (301) 504-6960.
Mary B. Murphy,
Director, Division of Enforcement and Litigation.
Gregory M. Reyes,
Trial Attorney.
Michael J. Rogal,
Trial Attorney.
Complaint Counsel, Office of Compliance and Field Operations, U.S.
Consumer Product Safety Commission, Bethesda, MD 20814, Tel: (301)
504-7809.
United States of America Consumer Product Safety Commission
In the Matter of Thyssenkrupp Access Corp., Respondent.
CPSC DOCKET NO.: 21-1
List and Summary of Documentary Evidence
Pursuant to 16 CFR 1025.11(b)(3) of the Commission's Rules of
Practice for Adjudicative Proceedings, the following is a list and
summary of documentary evidence supporting the charges in this matter.
Complaint Counsel reserves the right to offer additional or different
evidence during the course of the proceedings, or to withhold evidence
on the basis of any applicable legal privileges.
1. Claims, complaints, records, reports, CPSC's In-Depth
Investigations, and lawsuits concerning incidents or injuries involving
various models of residential elevators manufactured and distributed by
Respondent (``Elevators'').
2. Engineering drawings and instructional materials, including
installation, design, and planning guides (referred to as
``Installation Materials'').
3. Design, manufacturing, distribution, warnings, instructions, and
promotional materials associated with the Elevators.
4. CPSC Product Safety Assessments.
5. Correspondence between Respondent and CPSC staff related to the
Elevators.
6. Documents and information related to the Elevators, including
notices issued regarding the Elevators and similar products.
7. Documents and information related to Respondent's corporate
structure and Respondent's acquisition of and merger with other
manufacturers and distributors of the Elevators.
Dated this 7th day of July, 2021
Mary B. Murphy,
Director.
Gregory M. Reyes,
Trial Attorney.
Michael J. Rogal,
Trial Attorney.
Division of Enforcement and Litigation, Office of Compliance and
Field Operations, U.S. Consumer Product Safety Commission, Bethesda,
MD 20814, Tel: (301) 504-7809.
Complaint Counsel for U.S. Consumer Product Safety Commission.
Certificate of Service
I hereby certify that on July 7, 2021, I served the foregoing
Complaint and List and Summary of Documentary Evidence upon all parties
of record in these proceedings by emailing a copy to counsel, as
follows:
Sheila A. Millar,
Steven Michael Gentine,
Keller and Keckman LLP, 1001 G Street NW, Suite 500 West,
Washington, DC 20001.
Email: <a href="/cdn-cgi/l/email-protection#3c515550505d4e7c5754505d4b125f5351"><span class="__cf_email__" data-cfemail="b4d9ddd8d8d5c6f4dfdcd8d5c39ad7dbd9">[email protected]</span></a>, <a href="/cdn-cgi/l/email-protection#b4d3d1dac0dddad1f4dfdcd8d5c39ad7dbd9"><span class="__cf_email__" data-cfemail="e384868d978a8d86a3888b8f8294cd808c8e">[email protected]</span></a>.
Gregory M. Reyes,
Complaint Counsel for U.S. Consumer Product Safety Commission.
[FR Doc. 2021-14819 Filed 7-12-21; 8:45 am]
BILLING CODE 6355-01-P
</pre><script data-cfasync="false" src="/cdn-cgi/scripts/5c5dd728/cloudflare-static/email-decode.min.js"></script></body>
</html>Indexed from Federal Register on July 13, 2021.
This is legal information, not legal advice. Laws vary by jurisdiction and change frequently. Always verify current law with official sources and consult a licensed attorney in your jurisdiction for advice on your specific situation.